IoTEvents.Client.start_detector_model_analysis(**kwargs)¶Performs an analysis of your detector model. For more information, see Troubleshooting a detector model in the AWS IoT Events Developer Guide .
See also: AWS API Documentation
Request Syntax
response = client.start_detector_model_analysis(
detectorModelDefinition={
'states': [
{
'stateName': 'string',
'onInput': {
'events': [
{
'eventName': 'string',
'condition': 'string',
'actions': [
{
'setVariable': {
'variableName': 'string',
'value': 'string'
},
'sns': {
'targetArn': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'iotTopicPublish': {
'mqttTopic': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'setTimer': {
'timerName': 'string',
'seconds': 123,
'durationExpression': 'string'
},
'clearTimer': {
'timerName': 'string'
},
'resetTimer': {
'timerName': 'string'
},
'lambda': {
'functionArn': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'iotEvents': {
'inputName': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'sqs': {
'queueUrl': 'string',
'useBase64': True|False,
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'firehose': {
'deliveryStreamName': 'string',
'separator': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'dynamoDB': {
'hashKeyType': 'string',
'hashKeyField': 'string',
'hashKeyValue': 'string',
'rangeKeyType': 'string',
'rangeKeyField': 'string',
'rangeKeyValue': 'string',
'operation': 'string',
'payloadField': 'string',
'tableName': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'dynamoDBv2': {
'tableName': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'iotSiteWise': {
'entryId': 'string',
'assetId': 'string',
'propertyId': 'string',
'propertyAlias': 'string',
'propertyValue': {
'value': {
'stringValue': 'string',
'integerValue': 'string',
'doubleValue': 'string',
'booleanValue': 'string'
},
'timestamp': {
'timeInSeconds': 'string',
'offsetInNanos': 'string'
},
'quality': 'string'
}
}
},
]
},
],
'transitionEvents': [
{
'eventName': 'string',
'condition': 'string',
'actions': [
{
'setVariable': {
'variableName': 'string',
'value': 'string'
},
'sns': {
'targetArn': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'iotTopicPublish': {
'mqttTopic': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'setTimer': {
'timerName': 'string',
'seconds': 123,
'durationExpression': 'string'
},
'clearTimer': {
'timerName': 'string'
},
'resetTimer': {
'timerName': 'string'
},
'lambda': {
'functionArn': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'iotEvents': {
'inputName': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'sqs': {
'queueUrl': 'string',
'useBase64': True|False,
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'firehose': {
'deliveryStreamName': 'string',
'separator': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'dynamoDB': {
'hashKeyType': 'string',
'hashKeyField': 'string',
'hashKeyValue': 'string',
'rangeKeyType': 'string',
'rangeKeyField': 'string',
'rangeKeyValue': 'string',
'operation': 'string',
'payloadField': 'string',
'tableName': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'dynamoDBv2': {
'tableName': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'iotSiteWise': {
'entryId': 'string',
'assetId': 'string',
'propertyId': 'string',
'propertyAlias': 'string',
'propertyValue': {
'value': {
'stringValue': 'string',
'integerValue': 'string',
'doubleValue': 'string',
'booleanValue': 'string'
},
'timestamp': {
'timeInSeconds': 'string',
'offsetInNanos': 'string'
},
'quality': 'string'
}
}
},
],
'nextState': 'string'
},
]
},
'onEnter': {
'events': [
{
'eventName': 'string',
'condition': 'string',
'actions': [
{
'setVariable': {
'variableName': 'string',
'value': 'string'
},
'sns': {
'targetArn': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'iotTopicPublish': {
'mqttTopic': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'setTimer': {
'timerName': 'string',
'seconds': 123,
'durationExpression': 'string'
},
'clearTimer': {
'timerName': 'string'
},
'resetTimer': {
'timerName': 'string'
},
'lambda': {
'functionArn': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'iotEvents': {
'inputName': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'sqs': {
'queueUrl': 'string',
'useBase64': True|False,
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'firehose': {
'deliveryStreamName': 'string',
'separator': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'dynamoDB': {
'hashKeyType': 'string',
'hashKeyField': 'string',
'hashKeyValue': 'string',
'rangeKeyType': 'string',
'rangeKeyField': 'string',
'rangeKeyValue': 'string',
'operation': 'string',
'payloadField': 'string',
'tableName': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'dynamoDBv2': {
'tableName': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'iotSiteWise': {
'entryId': 'string',
'assetId': 'string',
'propertyId': 'string',
'propertyAlias': 'string',
'propertyValue': {
'value': {
'stringValue': 'string',
'integerValue': 'string',
'doubleValue': 'string',
'booleanValue': 'string'
},
'timestamp': {
'timeInSeconds': 'string',
'offsetInNanos': 'string'
},
'quality': 'string'
}
}
},
]
},
]
},
'onExit': {
'events': [
{
'eventName': 'string',
'condition': 'string',
'actions': [
{
'setVariable': {
'variableName': 'string',
'value': 'string'
},
'sns': {
'targetArn': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'iotTopicPublish': {
'mqttTopic': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'setTimer': {
'timerName': 'string',
'seconds': 123,
'durationExpression': 'string'
},
'clearTimer': {
'timerName': 'string'
},
'resetTimer': {
'timerName': 'string'
},
'lambda': {
'functionArn': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'iotEvents': {
'inputName': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'sqs': {
'queueUrl': 'string',
'useBase64': True|False,
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'firehose': {
'deliveryStreamName': 'string',
'separator': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'dynamoDB': {
'hashKeyType': 'string',
'hashKeyField': 'string',
'hashKeyValue': 'string',
'rangeKeyType': 'string',
'rangeKeyField': 'string',
'rangeKeyValue': 'string',
'operation': 'string',
'payloadField': 'string',
'tableName': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'dynamoDBv2': {
'tableName': 'string',
'payload': {
'contentExpression': 'string',
'type': 'STRING'|'JSON'
}
},
'iotSiteWise': {
'entryId': 'string',
'assetId': 'string',
'propertyId': 'string',
'propertyAlias': 'string',
'propertyValue': {
'value': {
'stringValue': 'string',
'integerValue': 'string',
'doubleValue': 'string',
'booleanValue': 'string'
},
'timestamp': {
'timeInSeconds': 'string',
'offsetInNanos': 'string'
},
'quality': 'string'
}
}
},
]
},
]
}
},
],
'initialStateName': 'string'
}
)
[REQUIRED]
Information that defines how a detector operates.
Information about the states of the detector.
Information that defines a state of a detector.
The name of the state.
When an input is received and the condition is TRUE, perform the specified actions .
Specifies the actions performed when the condition evaluates to TRUE.
Specifies the actions to be performed when the condition evaluates to TRUE.
The name of the event.
Optional. The Boolean expression that, when TRUE, causes the actions to be performed. If not present, the actions are performed (=TRUE). If the expression result is not a Boolean value, the actions are not performed (=FALSE).
The actions to be performed.
An action to be performed when the condition is TRUE.
Sets a variable to a specified value.
The name of the variable.
The new value of the variable.
Sends an Amazon SNS message.
The ARN of the Amazon SNS target where the message is sent.
You can configure the action payload when you send a message as an Amazon SNS push notification.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Publishes an MQTT message with the given topic to the AWS IoT message broker.
The MQTT topic of the message. You can use a string expression that includes variables ( $variable.<variable-name> ) and input values ( $input.<input-name>.<path-to-datum> ) as the topic string.
You can configure the action payload when you publish a message to an AWS IoT Core topic.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Information needed to set the timer.
The name of the timer.
The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy. The maximum value is 31622400 seconds.
The duration of the timer, in seconds. You can use a string expression that includes numbers, variables ( $variable.<variable-name> ), and input values ( $input.<input-name>.<path-to-datum> ) as the duration. The range of the duration is 1-31622400 seconds. To ensure accuracy, the minimum duration is 60 seconds. The evaluated result of the duration is rounded down to the nearest whole number.
Information needed to clear the timer.
The name of the timer to clear.
Information needed to reset the timer.
The name of the timer to reset.
Calls a Lambda function, passing in information about the detector model instance and the event that triggered the action.
The ARN of the Lambda function that is executed.
You can configure the action payload when you send a message to a Lambda function.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends AWS IoT Events input, which passes information about the detector model instance and the event that triggered the action.
The name of the AWS IoT Events input where the data is sent.
You can configure the action payload when you send a message to an AWS IoT Events input.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends information about the detector model instance and the event that triggered the action to an Amazon SQS queue.
The URL of the SQS queue where the data is written.
Set this to TRUE if you want the data to be base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.
You can configure the action payload when you send a message to an Amazon SQS queue.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends information about the detector model instance and the event that triggered the action to an Amazon Kinesis Data Firehose delivery stream.
The name of the Kinesis Data Firehose delivery stream where the data is written.
A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).
You can configure the action payload when you send a message to an Amazon Kinesis Data Firehose delivery stream.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. One column of the DynamoDB table receives all attribute-value pairs in the payload that you specify. For more information, see Actions in AWS IoT Events Developer Guide .
The data type for the hash key (also called the partition key). You can specify the following values:
'STRING' - The hash key is a string.'NUMBER' - The hash key is a number.If you don't specify hashKeyType , the default value is 'STRING' .
The name of the hash key (also called the partition key). The hashKeyField value must match the partition key of the target DynamoDB table.
The value of the hash key (also called the partition key).
The data type for the range key (also called the sort key), You can specify the following values:
'STRING' - The range key is a string.'NUMBER' - The range key is number.If you don't specify rangeKeyField , the default value is 'STRING' .
The name of the range key (also called the sort key). The rangeKeyField value must match the sort key of the target DynamoDB table.
The value of the range key (also called the sort key).
The type of operation to perform. You can specify the following values:
'INSERT' - Insert data as a new item into the DynamoDB table. This item uses the specified hash key as a partition key. If you specified a range key, the item uses the range key as a sort key.'UPDATE' - Update an existing item of the DynamoDB table with new data. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.'DELETE' - Delete an existing item of the DynamoDB table. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.If you don't specify this parameter, AWS IoT Events triggers the 'INSERT' operation.
The name of the DynamoDB column that receives the action payload.
If you don't specify this parameter, the name of the DynamoDB column is payload .
The name of the DynamoDB table. The tableName value must match the table name of the target DynamoDB table.
Information needed to configure the payload.
By default, AWS IoT Events generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression .
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. A separate column of the DynamoDB table receives one attribute-value pair in the payload that you specify. For more information, see Actions in AWS IoT Events Developer Guide .
The name of the DynamoDB table.
Information needed to configure the payload.
By default, AWS IoT Events generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression .
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends information about the detector model instance and the event that triggered the action to an asset property in AWS IoT SiteWise .
A unique identifier for this entry. You can use the entry ID to track which data entry causes an error in case of failure. The default is a new unique identifier.
The ID of the asset that has the specified property.
The ID of the asset property.
The alias of the asset property.
The value to send to the asset property. This value contains timestamp, quality, and value (TQV) information.
The value to send to an asset property.
The asset property value is a string. You must use an expression, and the evaluated result should be a string.
The asset property value is an integer. You must use an expression, and the evaluated result should be an integer.
The asset property value is a double. You must use an expression, and the evaluated result should be a double.
The asset property value is a Boolean value that must be 'TRUE' or 'FALSE' . You must use an expression, and the evaluated result should be a Boolean value.
The timestamp associated with the asset property value. The default is the current event time.
The timestamp, in seconds, in the Unix epoch format. The valid range is between 1-31556889864403199.
The nanosecond offset converted from timeInSeconds . The valid range is between 0-999999999.
The quality of the asset property value. The value must be 'GOOD' , 'BAD' , or 'UNCERTAIN' .
Specifies the actions performed, and the next state entered, when a condition evaluates to TRUE.
Specifies the actions performed and the next state entered when a condition evaluates to TRUE.
The name of the transition event.
Required. A Boolean expression that when TRUE causes the actions to be performed and the nextState to be entered.
The actions to be performed.
An action to be performed when the condition is TRUE.
Sets a variable to a specified value.
The name of the variable.
The new value of the variable.
Sends an Amazon SNS message.
The ARN of the Amazon SNS target where the message is sent.
You can configure the action payload when you send a message as an Amazon SNS push notification.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Publishes an MQTT message with the given topic to the AWS IoT message broker.
The MQTT topic of the message. You can use a string expression that includes variables ( $variable.<variable-name> ) and input values ( $input.<input-name>.<path-to-datum> ) as the topic string.
You can configure the action payload when you publish a message to an AWS IoT Core topic.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Information needed to set the timer.
The name of the timer.
The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy. The maximum value is 31622400 seconds.
The duration of the timer, in seconds. You can use a string expression that includes numbers, variables ( $variable.<variable-name> ), and input values ( $input.<input-name>.<path-to-datum> ) as the duration. The range of the duration is 1-31622400 seconds. To ensure accuracy, the minimum duration is 60 seconds. The evaluated result of the duration is rounded down to the nearest whole number.
Information needed to clear the timer.
The name of the timer to clear.
Information needed to reset the timer.
The name of the timer to reset.
Calls a Lambda function, passing in information about the detector model instance and the event that triggered the action.
The ARN of the Lambda function that is executed.
You can configure the action payload when you send a message to a Lambda function.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends AWS IoT Events input, which passes information about the detector model instance and the event that triggered the action.
The name of the AWS IoT Events input where the data is sent.
You can configure the action payload when you send a message to an AWS IoT Events input.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends information about the detector model instance and the event that triggered the action to an Amazon SQS queue.
The URL of the SQS queue where the data is written.
Set this to TRUE if you want the data to be base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.
You can configure the action payload when you send a message to an Amazon SQS queue.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends information about the detector model instance and the event that triggered the action to an Amazon Kinesis Data Firehose delivery stream.
The name of the Kinesis Data Firehose delivery stream where the data is written.
A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).
You can configure the action payload when you send a message to an Amazon Kinesis Data Firehose delivery stream.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. One column of the DynamoDB table receives all attribute-value pairs in the payload that you specify. For more information, see Actions in AWS IoT Events Developer Guide .
The data type for the hash key (also called the partition key). You can specify the following values:
'STRING' - The hash key is a string.'NUMBER' - The hash key is a number.If you don't specify hashKeyType , the default value is 'STRING' .
The name of the hash key (also called the partition key). The hashKeyField value must match the partition key of the target DynamoDB table.
The value of the hash key (also called the partition key).
The data type for the range key (also called the sort key), You can specify the following values:
'STRING' - The range key is a string.'NUMBER' - The range key is number.If you don't specify rangeKeyField , the default value is 'STRING' .
The name of the range key (also called the sort key). The rangeKeyField value must match the sort key of the target DynamoDB table.
The value of the range key (also called the sort key).
The type of operation to perform. You can specify the following values:
'INSERT' - Insert data as a new item into the DynamoDB table. This item uses the specified hash key as a partition key. If you specified a range key, the item uses the range key as a sort key.'UPDATE' - Update an existing item of the DynamoDB table with new data. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.'DELETE' - Delete an existing item of the DynamoDB table. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.If you don't specify this parameter, AWS IoT Events triggers the 'INSERT' operation.
The name of the DynamoDB column that receives the action payload.
If you don't specify this parameter, the name of the DynamoDB column is payload .
The name of the DynamoDB table. The tableName value must match the table name of the target DynamoDB table.
Information needed to configure the payload.
By default, AWS IoT Events generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression .
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. A separate column of the DynamoDB table receives one attribute-value pair in the payload that you specify. For more information, see Actions in AWS IoT Events Developer Guide .
The name of the DynamoDB table.
Information needed to configure the payload.
By default, AWS IoT Events generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression .
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends information about the detector model instance and the event that triggered the action to an asset property in AWS IoT SiteWise .
A unique identifier for this entry. You can use the entry ID to track which data entry causes an error in case of failure. The default is a new unique identifier.
The ID of the asset that has the specified property.
The ID of the asset property.
The alias of the asset property.
The value to send to the asset property. This value contains timestamp, quality, and value (TQV) information.
The value to send to an asset property.
The asset property value is a string. You must use an expression, and the evaluated result should be a string.
The asset property value is an integer. You must use an expression, and the evaluated result should be an integer.
The asset property value is a double. You must use an expression, and the evaluated result should be a double.
The asset property value is a Boolean value that must be 'TRUE' or 'FALSE' . You must use an expression, and the evaluated result should be a Boolean value.
The timestamp associated with the asset property value. The default is the current event time.
The timestamp, in seconds, in the Unix epoch format. The valid range is between 1-31556889864403199.
The nanosecond offset converted from timeInSeconds . The valid range is between 0-999999999.
The quality of the asset property value. The value must be 'GOOD' , 'BAD' , or 'UNCERTAIN' .
The next state to enter.
When entering this state, perform these actions if the condition is TRUE.
Specifies the actions that are performed when the state is entered and the condition is TRUE .
Specifies the actions to be performed when the condition evaluates to TRUE.
The name of the event.
Optional. The Boolean expression that, when TRUE, causes the actions to be performed. If not present, the actions are performed (=TRUE). If the expression result is not a Boolean value, the actions are not performed (=FALSE).
The actions to be performed.
An action to be performed when the condition is TRUE.
Sets a variable to a specified value.
The name of the variable.
The new value of the variable.
Sends an Amazon SNS message.
The ARN of the Amazon SNS target where the message is sent.
You can configure the action payload when you send a message as an Amazon SNS push notification.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Publishes an MQTT message with the given topic to the AWS IoT message broker.
The MQTT topic of the message. You can use a string expression that includes variables ( $variable.<variable-name> ) and input values ( $input.<input-name>.<path-to-datum> ) as the topic string.
You can configure the action payload when you publish a message to an AWS IoT Core topic.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Information needed to set the timer.
The name of the timer.
The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy. The maximum value is 31622400 seconds.
The duration of the timer, in seconds. You can use a string expression that includes numbers, variables ( $variable.<variable-name> ), and input values ( $input.<input-name>.<path-to-datum> ) as the duration. The range of the duration is 1-31622400 seconds. To ensure accuracy, the minimum duration is 60 seconds. The evaluated result of the duration is rounded down to the nearest whole number.
Information needed to clear the timer.
The name of the timer to clear.
Information needed to reset the timer.
The name of the timer to reset.
Calls a Lambda function, passing in information about the detector model instance and the event that triggered the action.
The ARN of the Lambda function that is executed.
You can configure the action payload when you send a message to a Lambda function.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends AWS IoT Events input, which passes information about the detector model instance and the event that triggered the action.
The name of the AWS IoT Events input where the data is sent.
You can configure the action payload when you send a message to an AWS IoT Events input.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends information about the detector model instance and the event that triggered the action to an Amazon SQS queue.
The URL of the SQS queue where the data is written.
Set this to TRUE if you want the data to be base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.
You can configure the action payload when you send a message to an Amazon SQS queue.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends information about the detector model instance and the event that triggered the action to an Amazon Kinesis Data Firehose delivery stream.
The name of the Kinesis Data Firehose delivery stream where the data is written.
A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).
You can configure the action payload when you send a message to an Amazon Kinesis Data Firehose delivery stream.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. One column of the DynamoDB table receives all attribute-value pairs in the payload that you specify. For more information, see Actions in AWS IoT Events Developer Guide .
The data type for the hash key (also called the partition key). You can specify the following values:
'STRING' - The hash key is a string.'NUMBER' - The hash key is a number.If you don't specify hashKeyType , the default value is 'STRING' .
The name of the hash key (also called the partition key). The hashKeyField value must match the partition key of the target DynamoDB table.
The value of the hash key (also called the partition key).
The data type for the range key (also called the sort key), You can specify the following values:
'STRING' - The range key is a string.'NUMBER' - The range key is number.If you don't specify rangeKeyField , the default value is 'STRING' .
The name of the range key (also called the sort key). The rangeKeyField value must match the sort key of the target DynamoDB table.
The value of the range key (also called the sort key).
The type of operation to perform. You can specify the following values:
'INSERT' - Insert data as a new item into the DynamoDB table. This item uses the specified hash key as a partition key. If you specified a range key, the item uses the range key as a sort key.'UPDATE' - Update an existing item of the DynamoDB table with new data. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.'DELETE' - Delete an existing item of the DynamoDB table. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.If you don't specify this parameter, AWS IoT Events triggers the 'INSERT' operation.
The name of the DynamoDB column that receives the action payload.
If you don't specify this parameter, the name of the DynamoDB column is payload .
The name of the DynamoDB table. The tableName value must match the table name of the target DynamoDB table.
Information needed to configure the payload.
By default, AWS IoT Events generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression .
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. A separate column of the DynamoDB table receives one attribute-value pair in the payload that you specify. For more information, see Actions in AWS IoT Events Developer Guide .
The name of the DynamoDB table.
Information needed to configure the payload.
By default, AWS IoT Events generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression .
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends information about the detector model instance and the event that triggered the action to an asset property in AWS IoT SiteWise .
A unique identifier for this entry. You can use the entry ID to track which data entry causes an error in case of failure. The default is a new unique identifier.
The ID of the asset that has the specified property.
The ID of the asset property.
The alias of the asset property.
The value to send to the asset property. This value contains timestamp, quality, and value (TQV) information.
The value to send to an asset property.
The asset property value is a string. You must use an expression, and the evaluated result should be a string.
The asset property value is an integer. You must use an expression, and the evaluated result should be an integer.
The asset property value is a double. You must use an expression, and the evaluated result should be a double.
The asset property value is a Boolean value that must be 'TRUE' or 'FALSE' . You must use an expression, and the evaluated result should be a Boolean value.
The timestamp associated with the asset property value. The default is the current event time.
The timestamp, in seconds, in the Unix epoch format. The valid range is between 1-31556889864403199.
The nanosecond offset converted from timeInSeconds . The valid range is between 0-999999999.
The quality of the asset property value. The value must be 'GOOD' , 'BAD' , or 'UNCERTAIN' .
When exiting this state, perform these actions if the specified condition is TRUE .
Specifies the actions that are performed when the state is exited and the condition is TRUE .
Specifies the actions to be performed when the condition evaluates to TRUE.
The name of the event.
Optional. The Boolean expression that, when TRUE, causes the actions to be performed. If not present, the actions are performed (=TRUE). If the expression result is not a Boolean value, the actions are not performed (=FALSE).
The actions to be performed.
An action to be performed when the condition is TRUE.
Sets a variable to a specified value.
The name of the variable.
The new value of the variable.
Sends an Amazon SNS message.
The ARN of the Amazon SNS target where the message is sent.
You can configure the action payload when you send a message as an Amazon SNS push notification.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Publishes an MQTT message with the given topic to the AWS IoT message broker.
The MQTT topic of the message. You can use a string expression that includes variables ( $variable.<variable-name> ) and input values ( $input.<input-name>.<path-to-datum> ) as the topic string.
You can configure the action payload when you publish a message to an AWS IoT Core topic.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Information needed to set the timer.
The name of the timer.
The number of seconds until the timer expires. The minimum value is 60 seconds to ensure accuracy. The maximum value is 31622400 seconds.
The duration of the timer, in seconds. You can use a string expression that includes numbers, variables ( $variable.<variable-name> ), and input values ( $input.<input-name>.<path-to-datum> ) as the duration. The range of the duration is 1-31622400 seconds. To ensure accuracy, the minimum duration is 60 seconds. The evaluated result of the duration is rounded down to the nearest whole number.
Information needed to clear the timer.
The name of the timer to clear.
Information needed to reset the timer.
The name of the timer to reset.
Calls a Lambda function, passing in information about the detector model instance and the event that triggered the action.
The ARN of the Lambda function that is executed.
You can configure the action payload when you send a message to a Lambda function.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends AWS IoT Events input, which passes information about the detector model instance and the event that triggered the action.
The name of the AWS IoT Events input where the data is sent.
You can configure the action payload when you send a message to an AWS IoT Events input.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends information about the detector model instance and the event that triggered the action to an Amazon SQS queue.
The URL of the SQS queue where the data is written.
Set this to TRUE if you want the data to be base-64 encoded before it is written to the queue. Otherwise, set this to FALSE.
You can configure the action payload when you send a message to an Amazon SQS queue.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends information about the detector model instance and the event that triggered the action to an Amazon Kinesis Data Firehose delivery stream.
The name of the Kinesis Data Firehose delivery stream where the data is written.
A character separator that is used to separate records written to the Kinesis Data Firehose delivery stream. Valid values are: 'n' (newline), 't' (tab), 'rn' (Windows newline), ',' (comma).
You can configure the action payload when you send a message to an Amazon Kinesis Data Firehose delivery stream.
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. One column of the DynamoDB table receives all attribute-value pairs in the payload that you specify. For more information, see Actions in AWS IoT Events Developer Guide .
The data type for the hash key (also called the partition key). You can specify the following values:
'STRING' - The hash key is a string.'NUMBER' - The hash key is a number.If you don't specify hashKeyType , the default value is 'STRING' .
The name of the hash key (also called the partition key). The hashKeyField value must match the partition key of the target DynamoDB table.
The value of the hash key (also called the partition key).
The data type for the range key (also called the sort key), You can specify the following values:
'STRING' - The range key is a string.'NUMBER' - The range key is number.If you don't specify rangeKeyField , the default value is 'STRING' .
The name of the range key (also called the sort key). The rangeKeyField value must match the sort key of the target DynamoDB table.
The value of the range key (also called the sort key).
The type of operation to perform. You can specify the following values:
'INSERT' - Insert data as a new item into the DynamoDB table. This item uses the specified hash key as a partition key. If you specified a range key, the item uses the range key as a sort key.'UPDATE' - Update an existing item of the DynamoDB table with new data. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.'DELETE' - Delete an existing item of the DynamoDB table. This item's partition key must match the specified hash key. If you specified a range key, the range key must match the item's sort key.If you don't specify this parameter, AWS IoT Events triggers the 'INSERT' operation.
The name of the DynamoDB column that receives the action payload.
If you don't specify this parameter, the name of the DynamoDB column is payload .
The name of the DynamoDB table. The tableName value must match the table name of the target DynamoDB table.
Information needed to configure the payload.
By default, AWS IoT Events generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression .
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Writes to the DynamoDB table that you created. The default action payload contains all attribute-value pairs that have the information about the detector model instance and the event that triggered the action. You can customize the payload. A separate column of the DynamoDB table receives one attribute-value pair in the payload that you specify. For more information, see Actions in AWS IoT Events Developer Guide .
The name of the DynamoDB table.
Information needed to configure the payload.
By default, AWS IoT Events generates a standard payload in JSON for any action. This action payload contains all attribute-value pairs that have the information about the detector model instance and the event triggered the action. To configure the action payload, you can use contentExpression .
The content of the payload. You can use a string expression that includes quoted strings ( '<string>' ), variables ( $variable.<variable-name> ), input values ( $input.<input-name>.<path-to-datum> ), string concatenations, and quoted strings that contain ${} as the content. The recommended maximum size of a content expression is 1 KB.
The value of the payload type can be either STRING or JSON .
Sends information about the detector model instance and the event that triggered the action to an asset property in AWS IoT SiteWise .
A unique identifier for this entry. You can use the entry ID to track which data entry causes an error in case of failure. The default is a new unique identifier.
The ID of the asset that has the specified property.
The ID of the asset property.
The alias of the asset property.
The value to send to the asset property. This value contains timestamp, quality, and value (TQV) information.
The value to send to an asset property.
The asset property value is a string. You must use an expression, and the evaluated result should be a string.
The asset property value is an integer. You must use an expression, and the evaluated result should be an integer.
The asset property value is a double. You must use an expression, and the evaluated result should be a double.
The asset property value is a Boolean value that must be 'TRUE' or 'FALSE' . You must use an expression, and the evaluated result should be a Boolean value.
The timestamp associated with the asset property value. The default is the current event time.
The timestamp, in seconds, in the Unix epoch format. The valid range is between 1-31556889864403199.
The nanosecond offset converted from timeInSeconds . The valid range is between 0-999999999.
The quality of the asset property value. The value must be 'GOOD' , 'BAD' , or 'UNCERTAIN' .
The state that is entered at the creation of each detector (instance).
{
'analysisId': 'string'
}
Response Structure
The ID that you can use to retrieve the analysis result.
Exceptions
IoTEvents.Client.exceptions.InvalidRequestExceptionIoTEvents.Client.exceptions.LimitExceededExceptionIoTEvents.Client.exceptions.ThrottlingExceptionIoTEvents.Client.exceptions.InternalFailureExceptionIoTEvents.Client.exceptions.ServiceUnavailableException