Table Of Contents

  1. Docs
  2. Available services
  3. S3
  4. upload_part

upload_part

S3.Client.upload_part(**kwargs)

Uploads a part in a multipart upload.

Note

In this operation, you provide part data in your request. However, you have an option to specify your existing Amazon S3 object as a data source for the part you are uploading. To upload a part from an existing object, you use the UploadPartCopy operation.

You must initiate a multipart upload (see CreateMultipartUpload ) before you can upload any part. In response to your initiate request, Amazon S3 returns an upload ID, a unique identifier, that you must include in your upload part request.

Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten.

For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide .

To ensure that data is not corrupted when traversing the network, specify the Content-MD5 header in the upload part request. Amazon S3 checks the part data against the provided MD5 value. If they do not match, Amazon S3 returns an error.

If the upload request is signed with Signature Version 4, then Amazon Web Services S3 uses the x-amz-content-sha256 header as a checksum instead of Content-MD5 . For more information see Authenticating Requests: Using the Authorization Header (Amazon Web Services Signature Version 4).

Note: After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.

For more information on multipart uploads, go to Multipart Upload Overview in the Amazon S3 User Guide .

For information on the permissions required to use the multipart upload API, go to Multipart Upload and Permissions in the Amazon S3 User Guide .

You can optionally request server-side encryption where Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it for you when you access it. You have the option of providing your own encryption key, or you can use the Amazon Web Services managed encryption keys. If you choose to provide your own encryption key, the request headers you provide in the request must match the headers you used in the request to initiate the upload by using CreateMultipartUpload. For more information, go to Using Server-Side Encryption in the Amazon S3 User Guide .

Server-side encryption is supported by the S3 Multipart Upload actions. Unless you are using a customer-provided encryption key, you don't need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see CreateMultipartUpload.

If you requested server-side encryption using a customer-provided encryption key in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following headers.

  • x-amz-server-side-encryption-customer-algorithm
  • x-amz-server-side-encryption-customer-key
  • x-amz-server-side-encryption-customer-key-MD5
Special Errors

See also: AWS API Documentation

Request Syntax

response = client.upload_part(
    Body=b'bytes'|file,
    Bucket='string',
    ContentLength=123,
    ContentMD5='string',
    ChecksumAlgorithm='CRC32'|'CRC32C'|'SHA1'|'SHA256',
    ChecksumCRC32='string',
    ChecksumCRC32C='string',
    ChecksumSHA1='string',
    ChecksumSHA256='string',
    Key='string',
    PartNumber=123,
    UploadId='string',
    SSECustomerAlgorithm='string',
    SSECustomerKey='string',
    RequestPayer='requester',
    ExpectedBucketOwner='string'
)
Parameters
  • Body (bytes or seekable file-like object) -- Object data.
  • Bucket (string) --

    [REQUIRED]

    The name of the bucket to which the multipart upload was initiated.

    When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName -AccountId .s3-accesspoint.*Region* .amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide .

    When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com . When using this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using Amazon S3 on Outposts in the Amazon S3 User Guide .

  • ContentLength (integer) -- Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.
  • ContentMD5 (string) -- The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.
  • ChecksumAlgorithm (string) --

    Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request . For more information, see Checking object integrity in the Amazon S3 User Guide .

    If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

    This checksum algorithm must be the same for all parts and it match the checksum value supplied in the CreateMultipartUpload request.

  • ChecksumCRC32 (string) -- This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide .
  • ChecksumCRC32C (string) -- This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide .
  • ChecksumSHA1 (string) -- This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide .
  • ChecksumSHA256 (string) -- This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide .
  • Key (string) --

    [REQUIRED]

    Object key for which the multipart upload was initiated.

  • PartNumber (integer) --

    [REQUIRED]

    Part number of part being uploaded. This is a positive integer between 1 and 10,000.

  • UploadId (string) --

    [REQUIRED]

    Upload ID identifying the multipart upload whose part is being uploaded.

  • SSECustomerAlgorithm (string) -- Specifies the algorithm to use to when encrypting the object (for example, AES256).
  • SSECustomerKey (string) -- Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header . This must be the same encryption key specified in the initiate multipart upload request.
  • SSECustomerKeyMD5 (string) --

    Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

    Please note that this parameter is automatically populated if it is not provided. Including this parameter is not required
  • RequestPayer (string) -- Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide .
  • ExpectedBucketOwner (string) -- The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).
Return type

dict

Returns

Response Syntax

{
    'ServerSideEncryption': 'AES256'|'aws:kms',
    'ETag': 'string',
    'ChecksumCRC32': 'string',
    'ChecksumCRC32C': 'string',
    'ChecksumSHA1': 'string',
    'ChecksumSHA256': 'string',
    'SSECustomerAlgorithm': 'string',
    'SSECustomerKeyMD5': 'string',
    'SSEKMSKeyId': 'string',
    'BucketKeyEnabled': True|False,
    'RequestCharged': 'requester'
}

Response Structure

  • (dict) --

    • ServerSideEncryption (string) --

      The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).

    • ETag (string) --

      Entity tag for the uploaded object.

    • ChecksumCRC32 (string) --

      The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide .

    • ChecksumCRC32C (string) --

      The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide .

    • ChecksumSHA1 (string) --

      The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide .

    • ChecksumSHA256 (string) --

      The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide .

    • SSECustomerAlgorithm (string) --

      If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.

    • SSECustomerKeyMD5 (string) --

      If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round-trip message integrity verification of the customer-provided encryption key.

    • SSEKMSKeyId (string) --

      If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key was used for the object.

    • BucketKeyEnabled (boolean) --

      Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).

    • RequestCharged (string) --

      If present, indicates that the requester was successfully charged for the request.

Examples

The following example uploads part 1 of a multipart upload. The example specifies a file name for the part data. The Upload ID is same that is returned by the initiate multipart upload.

response = client.upload_part(
    Body='fileToUpload',
    Bucket='examplebucket',
    Key='examplelargeobject',
    PartNumber='1',
    UploadId='xadcOB_7YPBOJuoFiQ9cz4P3Pe6FIZwO4f7wN93uHsNBEw97pl5eNwzExg0LAT2dUN91cOmrEQHDsP3WA60CEg--',
)

print(response)

Expected Output:

{
    'ETag': '"d8c2eafd90c266e19ab9dcacc479f8af"',
    'ResponseMetadata': {
        '...': '...',
    },
}
upload_fileobj
upload_part_copy
Privacy | Site Terms | Cookie preferences | © Copyright 2023, Amazon Web Services, Inc. Created using Sphinx.