WAFRegional / Client / create_web_acl

create_web_acl#

WAFRegional.Client.create_web_acl(**kwargs)#

Note

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.

For the latest version of AWS WAF , use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

Creates a WebACL , which contains the Rules that identify the CloudFront web requests that you want to allow, block, or count. AWS WAF evaluates Rules in order based on the value of Priority for each Rule .

You also specify a default action, either ALLOW or BLOCK . If a web request doesn’t match any of the Rules in a WebACL , AWS WAF responds to the request with the default action.

To create and configure a WebACL , perform the following steps:

Create and update the ByteMatchSet objects and other predicates that you want to include in Rules . For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet.
Create and update the Rules that you want to include in the WebACL . For more information, see CreateRule and UpdateRule.
Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateWebACL request.
Submit a CreateWebACL request.
Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateWebACL request.
Submit an UpdateWebACL request to specify the Rules that you want to include in the WebACL , to specify the default action, and to associate the WebACL with a CloudFront distribution.

For more information about how to use the AWS WAF API, see the AWS WAF Developer Guide.

See also: AWS API Documentation

Request Syntax

response = client.create_web_acl(
    Name='string',
    MetricName='string',
    DefaultAction={
        'Type': 'BLOCK'|'ALLOW'|'COUNT'
    },
    ChangeToken='string',
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ]
)

Parameters:

Name (string) –
[REQUIRED]

A friendly name or description of the WebACL. You can’t change Name after you create the WebACL .
MetricName (string) –
[REQUIRED]

A friendly name or description for the metrics for this WebACL .The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can’t contain whitespace or metric names reserved for AWS WAF, including “All” and “Default_Action.” You can’t change MetricName after you create the WebACL .
DefaultAction (dict) –
[REQUIRED]

The action that you want AWS WAF to take when a request doesn’t match the criteria specified in any of the Rule objects that are associated with the WebACL .
- Type (string) – [REQUIRED]
  
  Specifies how you want AWS WAF to respond to requests that match the settings in a Rule . Valid settings include the following:
  - ALLOW : AWS WAF allows requests
  - BLOCK : AWS WAF blocks requests
  - COUNT : AWS WAF increments a counter of the requests that match all of the conditions in the rule. AWS WAF then continues to inspect the web request based on the remaining rules in the web ACL. You can’t specify COUNT for the default action for a WebACL .
ChangeToken (string) –
[REQUIRED]

The value returned by the most recent call to GetChangeToken.
Tags (list) –
- (dict) –
  
  Note
  
  This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
  
  For the latest version of AWS WAF , use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  
  A tag associated with an AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to “customer” and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource.
  
  Tagging is only available through the API, SDKs, and CLI. You can’t manage or view tags through the AWS WAF Classic console. You can tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.
  - Key (string) – [REQUIRED]
  - Value (string) – [REQUIRED]

Return type:

dict

Returns:

Response Syntax

{
    'WebACL': {
        'WebACLId': 'string',
        'Name': 'string',
        'MetricName': 'string',
        'DefaultAction': {
            'Type': 'BLOCK'|'ALLOW'|'COUNT'
        },
        'Rules': [
            {
                'Priority': 123,
                'RuleId': 'string',
                'Action': {
                    'Type': 'BLOCK'|'ALLOW'|'COUNT'
                },
                'OverrideAction': {
                    'Type': 'NONE'|'COUNT'
                },
                'Type': 'REGULAR'|'RATE_BASED'|'GROUP',
                'ExcludedRules': [
                    {
                        'RuleId': 'string'
                    },
                ]
            },
        ],
        'WebACLArn': 'string'
    },
    'ChangeToken': 'string'
}

Response Structure

(dict) –
- WebACL (dict) –
  
  The WebACL returned in the CreateWebACL response.
  - WebACLId (string) –
    
    A unique identifier for a WebACL . You use WebACLId to get information about a WebACL (see GetWebACL ), update a WebACL (see UpdateWebACL ), and delete a WebACL from AWS WAF (see DeleteWebACL ).
    
    WebACLId is returned by CreateWebACL and by ListWebACLs.
  - Name (string) –
    
    A friendly name or description of the WebACL . You can’t change the name of a WebACL after you create it.
  - MetricName (string) –
    
    A friendly name or description for the metrics for this WebACL . The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can’t contain whitespace or metric names reserved for AWS WAF, including “All” and “Default_Action.” You can’t change MetricName after you create the WebACL .
  - DefaultAction (dict) –
    
    The action to perform if none of the Rules contained in the WebACL match. The action is specified by the WafAction object.
    - Type (string) –
      
      Specifies how you want AWS WAF to respond to requests that match the settings in a Rule . Valid settings include the following:
      - ALLOW : AWS WAF allows requests
      - BLOCK : AWS WAF blocks requests
      - COUNT : AWS WAF increments a counter of the requests that match all of the conditions in the rule. AWS WAF then continues to inspect the web request based on the remaining rules in the web ACL. You can’t specify COUNT for the default action for a WebACL .
  - Rules (list) –
    
    An array that contains the action for each Rule in a WebACL , the priority of the Rule , and the ID of the Rule .
    - (dict) –
      
      Note
      
      This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
      
      For the latest version of AWS WAF , use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
      
      The ActivatedRule object in an UpdateWebACL request specifies a Rule that you want to insert or delete, the priority of the Rule in the WebACL , and the action that you want AWS WAF to take when a web request matches the Rule ( ALLOW , BLOCK , or COUNT ).
      
      To specify whether to insert or delete a Rule , use the Action parameter in the WebACLUpdate data type.
      - Priority (integer) –
        
        Specifies the order in which the Rules in a WebACL are evaluated. Rules with a lower value for Priority are evaluated before Rules with a higher value. The value must be a unique integer. If you add multiple Rules to a WebACL , the values don’t need to be consecutive.
      - RuleId (string) –
        
        The RuleId for a Rule . You use RuleId to get more information about a Rule (see GetRule ), update a Rule (see UpdateRule ), insert a Rule into a WebACL or delete a one from a WebACL (see UpdateWebACL ), or delete a Rule from AWS WAF (see DeleteRule ).
        
        RuleId is returned by CreateRule and by ListRules.
      - Action (dict) –
        
        Specifies the action that CloudFront or AWS WAF takes when a web request matches the conditions in the Rule . Valid values for Action include the following:
        
        ALLOW : CloudFront responds with the requested object.
        
        BLOCK : CloudFront responds with an HTTP 403 (Forbidden) status code.
        
        COUNT : AWS WAF increments a counter of requests that match the conditions in the rule and then continues to inspect the web request based on the remaining rules in the web ACL.
        
        ActivatedRule|OverrideAction applies only when updating or adding a RuleGroup to a WebACL . In this case, you do not use ActivatedRule|Action . For all other update requests, ActivatedRule|Action is used instead of ActivatedRule|OverrideAction .
        
        Type (string) –
        
        Specifies how you want AWS WAF to respond to requests that match the settings in a Rule . Valid settings include the following:
        
        ALLOW : AWS WAF allows requests
        
        BLOCK : AWS WAF blocks requests
        
        COUNT : AWS WAF increments a counter of the requests that match all of the conditions in the rule. AWS WAF then continues to inspect the web request based on the remaining rules in the web ACL. You can’t specify COUNT for the default action for a WebACL .
      - OverrideAction (dict) –
        
        Use the OverrideAction to test your RuleGroup .
        
        Any rule in a RuleGroup can potentially block a request. If you set the OverrideAction to None , the RuleGroup will block a request if any individual rule in the RuleGroup matches the request and is configured to block that request. However if you first want to test the RuleGroup , set the OverrideAction to Count . The RuleGroup will then override any block action specified by individual rules contained within the group. Instead of blocking matching requests, those requests will be counted. You can view a record of counted requests using GetSampledRequests.
        
        ActivatedRule|OverrideAction applies only when updating or adding a RuleGroup to a WebACL . In this case you do not use ActivatedRule|Action . For all other update requests, ActivatedRule|Action is used instead of ActivatedRule|OverrideAction .
        
        Type (string) –
        
        COUNT overrides the action specified by the individual rule within a RuleGroup . If set to NONE , the rule’s action will take place.
      - Type (string) –
        
        The rule type, either REGULAR , as defined by Rule, RATE_BASED , as defined by RateBasedRule, or GROUP , as defined by RuleGroup. The default is REGULAR. Although this field is optional, be aware that if you try to add a RATE_BASED rule to a web ACL without setting the type, the UpdateWebACL request will fail because the request tries to add a REGULAR rule with the specified ID, which does not exist.
      - ExcludedRules (list) –
        
        An array of rules to exclude from a rule group. This is applicable only when the ActivatedRule refers to a RuleGroup .
        
        Sometimes it is necessary to troubleshoot rule groups that are blocking traffic unexpectedly (false positives). One troubleshooting technique is to identify the specific rule within the rule group that is blocking the legitimate traffic and then disable (exclude) that particular rule. You can exclude rules from both your own rule groups and AWS Marketplace rule groups that have been associated with a web ACL.
        
        Specifying ExcludedRules does not remove those rules from the rule group. Rather, it changes the action for the rules to COUNT . Therefore, requests that match an ExcludedRule are counted but not blocked. The RuleGroup owner will receive COUNT metrics for each ExcludedRule .
        
        If you want to exclude rules from a rule group that is already associated with a web ACL, perform the following steps:
        
        Use the AWS WAF logs to identify the IDs of the rules that you want to exclude. For more information about the logs, see Logging Web ACL Traffic Information.
        
        Submit an UpdateWebACL request that has two actions:
        
        The first action deletes the existing rule group from the web ACL. That is, in the UpdateWebACL request, the first Updates:Action should be DELETE and Updates:ActivatedRule:RuleId should be the rule group that contains the rules that you want to exclude.
        
        The second action inserts the same rule group back in, but specifying the rules to exclude. That is, the second Updates:Action should be INSERT , Updates:ActivatedRule:RuleId should be the rule group that you just removed, and ExcludedRules should contain the rules that you want to exclude.
        
        (dict) –
        
        Note
        
        This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
        
        For the latest version of AWS WAF , use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
        
        The rule to exclude from a rule group. This is applicable only when the ActivatedRule refers to a RuleGroup . The rule must belong to the RuleGroup that is specified by the ActivatedRule .
        
        RuleId (string) –
        
        The unique identifier for the rule to exclude from the rule group.
  - WebACLArn (string) –
    
    Tha Amazon Resource Name (ARN) of the web ACL.
- ChangeToken (string) –
  
  The ChangeToken that you used to submit the CreateWebACL request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.

Exceptions

WAFRegional.Client.exceptions.WAFStaleDataException
WAFRegional.Client.exceptions.WAFInternalErrorException
WAFRegional.Client.exceptions.WAFInvalidAccountException
WAFRegional.Client.exceptions.WAFDisallowedNameException
WAFRegional.Client.exceptions.WAFInvalidParameterException
WAFRegional.Client.exceptions.WAFLimitsExceededException
WAFRegional.Client.exceptions.WAFTagOperationException
WAFRegional.Client.exceptions.WAFTagOperationInternalErrorException
WAFRegional.Client.exceptions.WAFBadRequestException

Examples

The following example creates a web ACL named CreateExample.

response = client.create_web_acl(
    ChangeToken='abcd12f2-46da-4fdb-b8d5-fbd4c466928f',
    DefaultAction={
        'Type': 'ALLOW',
    },
    MetricName='CreateExample',
    Name='CreateExample',
)

print(response)

Expected Output:

{
    'ChangeToken': 'abcd12f2-46da-4fdb-b8d5-fbd4c466928f',
    'WebACL': {
        'DefaultAction': {
            'Type': 'ALLOW',
        },
        'MetricName': 'CreateExample',
        'Name': 'CreateExample',
        'Rules': [
            {
                'Action': {
                    'Type': 'ALLOW',
                },
                'Priority': 1,
                'RuleId': 'WAFRule-1-Example',
            },
        ],
        'WebACLId': 'example-46da-4444-5555-example',
    },
    'ResponseMetadata': {
        '...': '...',
    },
}