ServiceResource / Action / create_subnet

create_subnet#

EC2.ServiceResource.create_subnet(**kwargs)#

Creates a subnet in the specified VPC. For an IPv4 only subnet, specify an IPv4 CIDR block. If the VPC has an IPv6 CIDR block, you can create an IPv6 only subnet or a dual stack subnet instead. For an IPv6 only subnet, specify an IPv6 CIDR block. For a dual stack subnet, specify both an IPv4 CIDR block and an IPv6 CIDR block.

A subnet CIDR block must not overlap the CIDR block of an existing subnet in the VPC. After you create a subnet, you can’t change its CIDR block.

The allowed size for an IPv4 subnet is between a /28 netmask (16 IP addresses) and a /16 netmask (65,536 IP addresses). Amazon Web Services reserves both the first four and the last IPv4 address in each subnet’s CIDR block. They’re not available for your use.

If you’ve associated an IPv6 CIDR block with your VPC, you can associate an IPv6 CIDR block with a subnet when you create it. The allowed block size for an IPv6 subnet is a /64 netmask.

If you add more than one subnet to a VPC, they’re set up in a star topology with a logical router in the middle.

When you stop an instance in a subnet, it retains its private IPv4 address. It’s therefore possible to have a subnet with no running instances (they’re all stopped), but no remaining IP addresses available.

For more information, see Subnets in the Amazon VPC User Guide.

See also: AWS API Documentation

Request Syntax

subnet = ec2.create_subnet(
    TagSpecifications=[
        {
            'ResourceType': 'capacity-reservation'|'client-vpn-endpoint'|'customer-gateway'|'carrier-gateway'|'coip-pool'|'dedicated-host'|'dhcp-options'|'egress-only-internet-gateway'|'elastic-ip'|'elastic-gpu'|'export-image-task'|'export-instance-task'|'fleet'|'fpga-image'|'host-reservation'|'image'|'import-image-task'|'import-snapshot-task'|'instance'|'instance-event-window'|'internet-gateway'|'ipam'|'ipam-pool'|'ipam-scope'|'ipv4pool-ec2'|'ipv6pool-ec2'|'key-pair'|'launch-template'|'local-gateway'|'local-gateway-route-table'|'local-gateway-virtual-interface'|'local-gateway-virtual-interface-group'|'local-gateway-route-table-vpc-association'|'local-gateway-route-table-virtual-interface-group-association'|'natgateway'|'network-acl'|'network-interface'|'network-insights-analysis'|'network-insights-path'|'network-insights-access-scope'|'network-insights-access-scope-analysis'|'placement-group'|'prefix-list'|'replace-root-volume-task'|'reserved-instances'|'route-table'|'security-group'|'security-group-rule'|'snapshot'|'spot-fleet-request'|'spot-instances-request'|'subnet'|'subnet-cidr-reservation'|'traffic-mirror-filter'|'traffic-mirror-session'|'traffic-mirror-target'|'transit-gateway'|'transit-gateway-attachment'|'transit-gateway-connect-peer'|'transit-gateway-multicast-domain'|'transit-gateway-policy-table'|'transit-gateway-route-table'|'transit-gateway-route-table-announcement'|'volume'|'vpc'|'vpc-endpoint'|'vpc-endpoint-connection'|'vpc-endpoint-service'|'vpc-endpoint-service-permission'|'vpc-peering-connection'|'vpn-connection'|'vpn-gateway'|'vpc-flow-log'|'capacity-reservation-fleet'|'traffic-mirror-filter-rule'|'vpc-endpoint-connection-device-type'|'verified-access-instance'|'verified-access-group'|'verified-access-endpoint'|'verified-access-policy'|'verified-access-trust-provider'|'vpn-connection-device-type'|'vpc-block-public-access-exclusion'|'ipam-resource-discovery'|'ipam-resource-discovery-association'|'instance-connect-endpoint',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ]
        },
    ],
    AvailabilityZone='string',
    AvailabilityZoneId='string',
    CidrBlock='string',
    Ipv6CidrBlock='string',
    OutpostArn='string',
    VpcId='string',
    DryRun=True|False,
    Ipv6Native=True|False
)
Parameters:

  • TagSpecifications (list) –

    The tags to assign to the subnet.

    • (dict) –

      The tags to apply to a resource when the resource is being created. When you specify a tag, you must specify the resource type to tag, otherwise the request will fail.

      Note

      The Valid Values lists all the resource types that can be tagged. However, the action you’re using might not support tagging all of these resource types. If you try to tag a resource type that is unsupported for the action you’re using, you’ll get an error.

      • ResourceType (string) –

        The type of resource to tag on creation.

      • Tags (list) –

        The tags to apply to the resource.

        • (dict) –

          Describes a tag.

          • Key (string) –

            The key of the tag.

            Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.

          • Value (string) –

            The value of the tag.

            Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.

  • AvailabilityZone (string) –

    The Availability Zone or Local Zone for the subnet.

    Default: Amazon Web Services selects one for you. If you create more than one subnet in your VPC, we do not necessarily select a different zone for each subnet.

    To create a subnet in a Local Zone, set this value to the Local Zone ID, for example us-west-2-lax-1a. For information about the Regions that support Local Zones, see Local Zones locations.

    To create a subnet in an Outpost, set this value to the Availability Zone for the Outpost and specify the Outpost ARN.

  • AvailabilityZoneId (string) – The AZ ID or the Local Zone ID of the subnet.

  • CidrBlock (string) –

    The IPv4 network range for the subnet, in CIDR notation. For example, 10.0.0.0/24. We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.

    This parameter is not supported for an IPv6 only subnet.

  • Ipv6CidrBlock (string) –

    The IPv6 network range for the subnet, in CIDR notation. The subnet size must use a /64 prefix length.

    This parameter is required for an IPv6 only subnet.

  • OutpostArn (string) – The Amazon Resource Name (ARN) of the Outpost. If you specify an Outpost ARN, you must also specify the Availability Zone of the Outpost subnet.

  • VpcId (string) –

    [REQUIRED]

    The ID of the VPC.

  • DryRun (boolean) – Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

  • Ipv6Native (boolean) – Indicates whether to create an IPv6 only subnet.

Return type:

ec2.Subnet

Returns:

Subnet resource