Subnet / Action / create_instances

create_instances#

EC2.Subnet.create_instances(**kwargs)#

Launches the specified number of instances using an AMI for which you have permissions.

You can specify a number of options, or leave the default options. The following rules apply:

  • If you don’t specify a subnet ID, we choose a default subnet from your default VPC for you. If you don’t have a default VPC, you must specify a subnet ID in the request.

  • All instances have a network interface with a primary private IPv4 address. If you don’t specify this address, we choose one from the IPv4 range of your subnet.

  • Not all instance types support IPv6 addresses. For more information, see Instance types.

  • If you don’t specify a security group ID, we use the default security group. For more information, see Security groups.

  • If any of the AMIs have a product code attached for which the user has not subscribed, the request fails.

You can create a launch template, which is a resource that contains the parameters to launch an instance. When you launch an instance using RunInstances, you can specify the launch template instead of specifying the launch parameters.

To ensure faster instance launches, break up large requests into smaller batches. For example, create five separate launch requests for 100 instances each instead of one launch request for 500 instances.

An instance is ready for you to use when it’s in the running state. You can check the state of your instance using DescribeInstances. You can tag instances and EBS volumes during launch, after launch, or both. For more information, see CreateTags and Tagging your Amazon EC2 resources.

Linux instances have access to the public key of the key pair at boot. You can use this key to provide secure access to the instance. Amazon EC2 public images use this feature to provide secure access without passwords. For more information, see Key pairs.

For troubleshooting, see What to do if an instance immediately terminates, and Troubleshooting connecting to your instance.

See also: AWS API Documentation

Request Syntax

instance = subnet.create_instances(
    BlockDeviceMappings=[
        {
            'DeviceName': 'string',
            'VirtualName': 'string',
            'Ebs': {
                'DeleteOnTermination': True|False,
                'Iops': 123,
                'SnapshotId': 'string',
                'VolumeSize': 123,
                'VolumeType': 'standard'|'io1'|'io2'|'gp2'|'sc1'|'st1'|'gp3',
                'KmsKeyId': 'string',
                'Throughput': 123,
                'OutpostArn': 'string',
                'Encrypted': True|False
            },
            'NoDevice': 'string'
        },
    ],
    ImageId='string',
    InstanceType='a1.medium'|'a1.large'|'a1.xlarge'|'a1.2xlarge'|'a1.4xlarge'|'a1.metal'|'c1.medium'|'c1.xlarge'|'c3.large'|'c3.xlarge'|'c3.2xlarge'|'c3.4xlarge'|'c3.8xlarge'|'c4.large'|'c4.xlarge'|'c4.2xlarge'|'c4.4xlarge'|'c4.8xlarge'|'c5.large'|'c5.xlarge'|'c5.2xlarge'|'c5.4xlarge'|'c5.9xlarge'|'c5.12xlarge'|'c5.18xlarge'|'c5.24xlarge'|'c5.metal'|'c5a.large'|'c5a.xlarge'|'c5a.2xlarge'|'c5a.4xlarge'|'c5a.8xlarge'|'c5a.12xlarge'|'c5a.16xlarge'|'c5a.24xlarge'|'c5ad.large'|'c5ad.xlarge'|'c5ad.2xlarge'|'c5ad.4xlarge'|'c5ad.8xlarge'|'c5ad.12xlarge'|'c5ad.16xlarge'|'c5ad.24xlarge'|'c5d.large'|'c5d.xlarge'|'c5d.2xlarge'|'c5d.4xlarge'|'c5d.9xlarge'|'c5d.12xlarge'|'c5d.18xlarge'|'c5d.24xlarge'|'c5d.metal'|'c5n.large'|'c5n.xlarge'|'c5n.2xlarge'|'c5n.4xlarge'|'c5n.9xlarge'|'c5n.18xlarge'|'c5n.metal'|'c6g.medium'|'c6g.large'|'c6g.xlarge'|'c6g.2xlarge'|'c6g.4xlarge'|'c6g.8xlarge'|'c6g.12xlarge'|'c6g.16xlarge'|'c6g.metal'|'c6gd.medium'|'c6gd.large'|'c6gd.xlarge'|'c6gd.2xlarge'|'c6gd.4xlarge'|'c6gd.8xlarge'|'c6gd.12xlarge'|'c6gd.16xlarge'|'c6gd.metal'|'c6gn.medium'|'c6gn.large'|'c6gn.xlarge'|'c6gn.2xlarge'|'c6gn.4xlarge'|'c6gn.8xlarge'|'c6gn.12xlarge'|'c6gn.16xlarge'|'c6i.large'|'c6i.xlarge'|'c6i.2xlarge'|'c6i.4xlarge'|'c6i.8xlarge'|'c6i.12xlarge'|'c6i.16xlarge'|'c6i.24xlarge'|'c6i.32xlarge'|'c6i.metal'|'cc1.4xlarge'|'cc2.8xlarge'|'cg1.4xlarge'|'cr1.8xlarge'|'d2.xlarge'|'d2.2xlarge'|'d2.4xlarge'|'d2.8xlarge'|'d3.xlarge'|'d3.2xlarge'|'d3.4xlarge'|'d3.8xlarge'|'d3en.xlarge'|'d3en.2xlarge'|'d3en.4xlarge'|'d3en.6xlarge'|'d3en.8xlarge'|'d3en.12xlarge'|'dl1.24xlarge'|'f1.2xlarge'|'f1.4xlarge'|'f1.16xlarge'|'g2.2xlarge'|'g2.8xlarge'|'g3.4xlarge'|'g3.8xlarge'|'g3.16xlarge'|'g3s.xlarge'|'g4ad.xlarge'|'g4ad.2xlarge'|'g4ad.4xlarge'|'g4ad.8xlarge'|'g4ad.16xlarge'|'g4dn.xlarge'|'g4dn.2xlarge'|'g4dn.4xlarge'|'g4dn.8xlarge'|'g4dn.12xlarge'|'g4dn.16xlarge'|'g4dn.metal'|'g5.xlarge'|'g5.2xlarge'|'g5.4xlarge'|'g5.8xlarge'|'g5.12xlarge'|'g5.16xlarge'|'g5.24xlarge'|'g5.48xlarge'|'g5g.xlarge'|'g5g.2xlarge'|'g5g.4xlarge'|'g5g.8xlarge'|'g5g.16xlarge'|'g5g.metal'|'hi1.4xlarge'|'hpc6a.48xlarge'|'hs1.8xlarge'|'h1.2xlarge'|'h1.4xlarge'|'h1.8xlarge'|'h1.16xlarge'|'i2.xlarge'|'i2.2xlarge'|'i2.4xlarge'|'i2.8xlarge'|'i3.large'|'i3.xlarge'|'i3.2xlarge'|'i3.4xlarge'|'i3.8xlarge'|'i3.16xlarge'|'i3.metal'|'i3en.large'|'i3en.xlarge'|'i3en.2xlarge'|'i3en.3xlarge'|'i3en.6xlarge'|'i3en.12xlarge'|'i3en.24xlarge'|'i3en.metal'|'im4gn.large'|'im4gn.xlarge'|'im4gn.2xlarge'|'im4gn.4xlarge'|'im4gn.8xlarge'|'im4gn.16xlarge'|'inf1.xlarge'|'inf1.2xlarge'|'inf1.6xlarge'|'inf1.24xlarge'|'is4gen.medium'|'is4gen.large'|'is4gen.xlarge'|'is4gen.2xlarge'|'is4gen.4xlarge'|'is4gen.8xlarge'|'m1.small'|'m1.medium'|'m1.large'|'m1.xlarge'|'m2.xlarge'|'m2.2xlarge'|'m2.4xlarge'|'m3.medium'|'m3.large'|'m3.xlarge'|'m3.2xlarge'|'m4.large'|'m4.xlarge'|'m4.2xlarge'|'m4.4xlarge'|'m4.10xlarge'|'m4.16xlarge'|'m5.large'|'m5.xlarge'|'m5.2xlarge'|'m5.4xlarge'|'m5.8xlarge'|'m5.12xlarge'|'m5.16xlarge'|'m5.24xlarge'|'m5.metal'|'m5a.large'|'m5a.xlarge'|'m5a.2xlarge'|'m5a.4xlarge'|'m5a.8xlarge'|'m5a.12xlarge'|'m5a.16xlarge'|'m5a.24xlarge'|'m5ad.large'|'m5ad.xlarge'|'m5ad.2xlarge'|'m5ad.4xlarge'|'m5ad.8xlarge'|'m5ad.12xlarge'|'m5ad.16xlarge'|'m5ad.24xlarge'|'m5d.large'|'m5d.xlarge'|'m5d.2xlarge'|'m5d.4xlarge'|'m5d.8xlarge'|'m5d.12xlarge'|'m5d.16xlarge'|'m5d.24xlarge'|'m5d.metal'|'m5dn.large'|'m5dn.xlarge'|'m5dn.2xlarge'|'m5dn.4xlarge'|'m5dn.8xlarge'|'m5dn.12xlarge'|'m5dn.16xlarge'|'m5dn.24xlarge'|'m5dn.metal'|'m5n.large'|'m5n.xlarge'|'m5n.2xlarge'|'m5n.4xlarge'|'m5n.8xlarge'|'m5n.12xlarge'|'m5n.16xlarge'|'m5n.24xlarge'|'m5n.metal'|'m5zn.large'|'m5zn.xlarge'|'m5zn.2xlarge'|'m5zn.3xlarge'|'m5zn.6xlarge'|'m5zn.12xlarge'|'m5zn.metal'|'m6a.large'|'m6a.xlarge'|'m6a.2xlarge'|'m6a.4xlarge'|'m6a.8xlarge'|'m6a.12xlarge'|'m6a.16xlarge'|'m6a.24xlarge'|'m6a.32xlarge'|'m6a.48xlarge'|'m6g.metal'|'m6g.medium'|'m6g.large'|'m6g.xlarge'|'m6g.2xlarge'|'m6g.4xlarge'|'m6g.8xlarge'|'m6g.12xlarge'|'m6g.16xlarge'|'m6gd.metal'|'m6gd.medium'|'m6gd.large'|'m6gd.xlarge'|'m6gd.2xlarge'|'m6gd.4xlarge'|'m6gd.8xlarge'|'m6gd.12xlarge'|'m6gd.16xlarge'|'m6i.large'|'m6i.xlarge'|'m6i.2xlarge'|'m6i.4xlarge'|'m6i.8xlarge'|'m6i.12xlarge'|'m6i.16xlarge'|'m6i.24xlarge'|'m6i.32xlarge'|'m6i.metal'|'mac1.metal'|'p2.xlarge'|'p2.8xlarge'|'p2.16xlarge'|'p3.2xlarge'|'p3.8xlarge'|'p3.16xlarge'|'p3dn.24xlarge'|'p4d.24xlarge'|'r3.large'|'r3.xlarge'|'r3.2xlarge'|'r3.4xlarge'|'r3.8xlarge'|'r4.large'|'r4.xlarge'|'r4.2xlarge'|'r4.4xlarge'|'r4.8xlarge'|'r4.16xlarge'|'r5.large'|'r5.xlarge'|'r5.2xlarge'|'r5.4xlarge'|'r5.8xlarge'|'r5.12xlarge'|'r5.16xlarge'|'r5.24xlarge'|'r5.metal'|'r5a.large'|'r5a.xlarge'|'r5a.2xlarge'|'r5a.4xlarge'|'r5a.8xlarge'|'r5a.12xlarge'|'r5a.16xlarge'|'r5a.24xlarge'|'r5ad.large'|'r5ad.xlarge'|'r5ad.2xlarge'|'r5ad.4xlarge'|'r5ad.8xlarge'|'r5ad.12xlarge'|'r5ad.16xlarge'|'r5ad.24xlarge'|'r5b.large'|'r5b.xlarge'|'r5b.2xlarge'|'r5b.4xlarge'|'r5b.8xlarge'|'r5b.12xlarge'|'r5b.16xlarge'|'r5b.24xlarge'|'r5b.metal'|'r5d.large'|'r5d.xlarge'|'r5d.2xlarge'|'r5d.4xlarge'|'r5d.8xlarge'|'r5d.12xlarge'|'r5d.16xlarge'|'r5d.24xlarge'|'r5d.metal'|'r5dn.large'|'r5dn.xlarge'|'r5dn.2xlarge'|'r5dn.4xlarge'|'r5dn.8xlarge'|'r5dn.12xlarge'|'r5dn.16xlarge'|'r5dn.24xlarge'|'r5dn.metal'|'r5n.large'|'r5n.xlarge'|'r5n.2xlarge'|'r5n.4xlarge'|'r5n.8xlarge'|'r5n.12xlarge'|'r5n.16xlarge'|'r5n.24xlarge'|'r5n.metal'|'r6g.medium'|'r6g.large'|'r6g.xlarge'|'r6g.2xlarge'|'r6g.4xlarge'|'r6g.8xlarge'|'r6g.12xlarge'|'r6g.16xlarge'|'r6g.metal'|'r6gd.medium'|'r6gd.large'|'r6gd.xlarge'|'r6gd.2xlarge'|'r6gd.4xlarge'|'r6gd.8xlarge'|'r6gd.12xlarge'|'r6gd.16xlarge'|'r6gd.metal'|'r6i.large'|'r6i.xlarge'|'r6i.2xlarge'|'r6i.4xlarge'|'r6i.8xlarge'|'r6i.12xlarge'|'r6i.16xlarge'|'r6i.24xlarge'|'r6i.32xlarge'|'r6i.metal'|'t1.micro'|'t2.nano'|'t2.micro'|'t2.small'|'t2.medium'|'t2.large'|'t2.xlarge'|'t2.2xlarge'|'t3.nano'|'t3.micro'|'t3.small'|'t3.medium'|'t3.large'|'t3.xlarge'|'t3.2xlarge'|'t3a.nano'|'t3a.micro'|'t3a.small'|'t3a.medium'|'t3a.large'|'t3a.xlarge'|'t3a.2xlarge'|'t4g.nano'|'t4g.micro'|'t4g.small'|'t4g.medium'|'t4g.large'|'t4g.xlarge'|'t4g.2xlarge'|'u-6tb1.56xlarge'|'u-6tb1.112xlarge'|'u-9tb1.112xlarge'|'u-12tb1.112xlarge'|'u-6tb1.metal'|'u-9tb1.metal'|'u-12tb1.metal'|'u-18tb1.metal'|'u-24tb1.metal'|'vt1.3xlarge'|'vt1.6xlarge'|'vt1.24xlarge'|'x1.16xlarge'|'x1.32xlarge'|'x1e.xlarge'|'x1e.2xlarge'|'x1e.4xlarge'|'x1e.8xlarge'|'x1e.16xlarge'|'x1e.32xlarge'|'x2iezn.2xlarge'|'x2iezn.4xlarge'|'x2iezn.6xlarge'|'x2iezn.8xlarge'|'x2iezn.12xlarge'|'x2iezn.metal'|'x2gd.medium'|'x2gd.large'|'x2gd.xlarge'|'x2gd.2xlarge'|'x2gd.4xlarge'|'x2gd.8xlarge'|'x2gd.12xlarge'|'x2gd.16xlarge'|'x2gd.metal'|'z1d.large'|'z1d.xlarge'|'z1d.2xlarge'|'z1d.3xlarge'|'z1d.6xlarge'|'z1d.12xlarge'|'z1d.metal'|'x2idn.16xlarge'|'x2idn.24xlarge'|'x2idn.32xlarge'|'x2iedn.xlarge'|'x2iedn.2xlarge'|'x2iedn.4xlarge'|'x2iedn.8xlarge'|'x2iedn.16xlarge'|'x2iedn.24xlarge'|'x2iedn.32xlarge'|'c6a.large'|'c6a.xlarge'|'c6a.2xlarge'|'c6a.4xlarge'|'c6a.8xlarge'|'c6a.12xlarge'|'c6a.16xlarge'|'c6a.24xlarge'|'c6a.32xlarge'|'c6a.48xlarge'|'c6a.metal'|'m6a.metal'|'i4i.large'|'i4i.xlarge'|'i4i.2xlarge'|'i4i.4xlarge'|'i4i.8xlarge'|'i4i.16xlarge'|'i4i.32xlarge'|'i4i.metal'|'x2idn.metal'|'x2iedn.metal'|'c7g.medium'|'c7g.large'|'c7g.xlarge'|'c7g.2xlarge'|'c7g.4xlarge'|'c7g.8xlarge'|'c7g.12xlarge'|'c7g.16xlarge'|'mac2.metal'|'c6id.large'|'c6id.xlarge'|'c6id.2xlarge'|'c6id.4xlarge'|'c6id.8xlarge'|'c6id.12xlarge'|'c6id.16xlarge'|'c6id.24xlarge'|'c6id.32xlarge'|'c6id.metal'|'m6id.large'|'m6id.xlarge'|'m6id.2xlarge'|'m6id.4xlarge'|'m6id.8xlarge'|'m6id.12xlarge'|'m6id.16xlarge'|'m6id.24xlarge'|'m6id.32xlarge'|'m6id.metal'|'r6id.large'|'r6id.xlarge'|'r6id.2xlarge'|'r6id.4xlarge'|'r6id.8xlarge'|'r6id.12xlarge'|'r6id.16xlarge'|'r6id.24xlarge'|'r6id.32xlarge'|'r6id.metal'|'r6a.large'|'r6a.xlarge'|'r6a.2xlarge'|'r6a.4xlarge'|'r6a.8xlarge'|'r6a.12xlarge'|'r6a.16xlarge'|'r6a.24xlarge'|'r6a.32xlarge'|'r6a.48xlarge'|'r6a.metal'|'p4de.24xlarge'|'u-3tb1.56xlarge'|'u-18tb1.112xlarge'|'u-24tb1.112xlarge'|'trn1.2xlarge'|'trn1.32xlarge'|'hpc6id.32xlarge'|'c6in.large'|'c6in.xlarge'|'c6in.2xlarge'|'c6in.4xlarge'|'c6in.8xlarge'|'c6in.12xlarge'|'c6in.16xlarge'|'c6in.24xlarge'|'c6in.32xlarge'|'m6in.large'|'m6in.xlarge'|'m6in.2xlarge'|'m6in.4xlarge'|'m6in.8xlarge'|'m6in.12xlarge'|'m6in.16xlarge'|'m6in.24xlarge'|'m6in.32xlarge'|'m6idn.large'|'m6idn.xlarge'|'m6idn.2xlarge'|'m6idn.4xlarge'|'m6idn.8xlarge'|'m6idn.12xlarge'|'m6idn.16xlarge'|'m6idn.24xlarge'|'m6idn.32xlarge'|'r6in.large'|'r6in.xlarge'|'r6in.2xlarge'|'r6in.4xlarge'|'r6in.8xlarge'|'r6in.12xlarge'|'r6in.16xlarge'|'r6in.24xlarge'|'r6in.32xlarge'|'r6idn.large'|'r6idn.xlarge'|'r6idn.2xlarge'|'r6idn.4xlarge'|'r6idn.8xlarge'|'r6idn.12xlarge'|'r6idn.16xlarge'|'r6idn.24xlarge'|'r6idn.32xlarge'|'c7g.metal'|'m7g.medium'|'m7g.large'|'m7g.xlarge'|'m7g.2xlarge'|'m7g.4xlarge'|'m7g.8xlarge'|'m7g.12xlarge'|'m7g.16xlarge'|'m7g.metal'|'r7g.medium'|'r7g.large'|'r7g.xlarge'|'r7g.2xlarge'|'r7g.4xlarge'|'r7g.8xlarge'|'r7g.12xlarge'|'r7g.16xlarge'|'r7g.metal'|'c6in.metal'|'m6in.metal'|'m6idn.metal'|'r6in.metal'|'r6idn.metal'|'inf2.xlarge'|'inf2.8xlarge'|'inf2.24xlarge'|'inf2.48xlarge'|'trn1n.32xlarge'|'i4g.large'|'i4g.xlarge'|'i4g.2xlarge'|'i4g.4xlarge'|'i4g.8xlarge'|'i4g.16xlarge'|'hpc7g.4xlarge'|'hpc7g.8xlarge'|'hpc7g.16xlarge'|'c7gn.medium'|'c7gn.large'|'c7gn.xlarge'|'c7gn.2xlarge'|'c7gn.4xlarge'|'c7gn.8xlarge'|'c7gn.12xlarge'|'c7gn.16xlarge'|'p5.48xlarge'|'m7i.large'|'m7i.xlarge'|'m7i.2xlarge'|'m7i.4xlarge'|'m7i.8xlarge'|'m7i.12xlarge'|'m7i.16xlarge'|'m7i.24xlarge'|'m7i.48xlarge'|'m7i-flex.large'|'m7i-flex.xlarge'|'m7i-flex.2xlarge'|'m7i-flex.4xlarge'|'m7i-flex.8xlarge',
    Ipv6AddressCount=123,
    Ipv6Addresses=[
        {
            'Ipv6Address': 'string',
            'IsPrimaryIpv6': True|False
        },
    ],
    KernelId='string',
    KeyName='string',
    MaxCount=123,
    MinCount=123,
    Monitoring={
        'Enabled': True|False
    },
    Placement={
        'AvailabilityZone': 'string',
        'Affinity': 'string',
        'GroupName': 'string',
        'PartitionNumber': 123,
        'HostId': 'string',
        'Tenancy': 'default'|'dedicated'|'host',
        'SpreadDomain': 'string',
        'HostResourceGroupArn': 'string',
        'GroupId': 'string'
    },
    RamdiskId='string',
    SecurityGroupIds=[
        'string',
    ],
    SecurityGroups=[
        'string',
    ],
    UserData='string',
    AdditionalInfo='string',
    ClientToken='string',
    DisableApiTermination=True|False,
    DryRun=True|False,
    EbsOptimized=True|False,
    IamInstanceProfile={
        'Arn': 'string',
        'Name': 'string'
    },
    InstanceInitiatedShutdownBehavior='stop'|'terminate',
    NetworkInterfaces=[
        {
            'AssociatePublicIpAddress': True|False,
            'DeleteOnTermination': True|False,
            'Description': 'string',
            'DeviceIndex': 123,
            'Groups': [
                'string',
            ],
            'Ipv6AddressCount': 123,
            'Ipv6Addresses': [
                {
                    'Ipv6Address': 'string',
                    'IsPrimaryIpv6': True|False
                },
            ],
            'NetworkInterfaceId': 'string',
            'PrivateIpAddress': 'string',
            'PrivateIpAddresses': [
                {
                    'Primary': True|False,
                    'PrivateIpAddress': 'string'
                },
            ],
            'SecondaryPrivateIpAddressCount': 123,
            'SubnetId': 'string',
            'AssociateCarrierIpAddress': True|False,
            'InterfaceType': 'string',
            'NetworkCardIndex': 123,
            'Ipv4Prefixes': [
                {
                    'Ipv4Prefix': 'string'
                },
            ],
            'Ipv4PrefixCount': 123,
            'Ipv6Prefixes': [
                {
                    'Ipv6Prefix': 'string'
                },
            ],
            'Ipv6PrefixCount': 123,
            'PrimaryIpv6': True|False
        },
    ],
    PrivateIpAddress='string',
    ElasticGpuSpecification=[
        {
            'Type': 'string'
        },
    ],
    ElasticInferenceAccelerators=[
        {
            'Type': 'string',
            'Count': 123
        },
    ],
    TagSpecifications=[
        {
            'ResourceType': 'capacity-reservation'|'client-vpn-endpoint'|'customer-gateway'|'carrier-gateway'|'coip-pool'|'dedicated-host'|'dhcp-options'|'egress-only-internet-gateway'|'elastic-ip'|'elastic-gpu'|'export-image-task'|'export-instance-task'|'fleet'|'fpga-image'|'host-reservation'|'image'|'import-image-task'|'import-snapshot-task'|'instance'|'instance-event-window'|'internet-gateway'|'ipam'|'ipam-pool'|'ipam-scope'|'ipv4pool-ec2'|'ipv6pool-ec2'|'key-pair'|'launch-template'|'local-gateway'|'local-gateway-route-table'|'local-gateway-virtual-interface'|'local-gateway-virtual-interface-group'|'local-gateway-route-table-vpc-association'|'local-gateway-route-table-virtual-interface-group-association'|'natgateway'|'network-acl'|'network-interface'|'network-insights-analysis'|'network-insights-path'|'network-insights-access-scope'|'network-insights-access-scope-analysis'|'placement-group'|'prefix-list'|'replace-root-volume-task'|'reserved-instances'|'route-table'|'security-group'|'security-group-rule'|'snapshot'|'spot-fleet-request'|'spot-instances-request'|'subnet'|'subnet-cidr-reservation'|'traffic-mirror-filter'|'traffic-mirror-session'|'traffic-mirror-target'|'transit-gateway'|'transit-gateway-attachment'|'transit-gateway-connect-peer'|'transit-gateway-multicast-domain'|'transit-gateway-policy-table'|'transit-gateway-route-table'|'transit-gateway-route-table-announcement'|'volume'|'vpc'|'vpc-endpoint'|'vpc-endpoint-connection'|'vpc-endpoint-service'|'vpc-endpoint-service-permission'|'vpc-peering-connection'|'vpn-connection'|'vpn-gateway'|'vpc-flow-log'|'capacity-reservation-fleet'|'traffic-mirror-filter-rule'|'vpc-endpoint-connection-device-type'|'verified-access-instance'|'verified-access-group'|'verified-access-endpoint'|'verified-access-policy'|'verified-access-trust-provider'|'vpn-connection-device-type'|'vpc-block-public-access-exclusion'|'ipam-resource-discovery'|'ipam-resource-discovery-association'|'instance-connect-endpoint',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ]
        },
    ],
    LaunchTemplate={
        'LaunchTemplateId': 'string',
        'LaunchTemplateName': 'string',
        'Version': 'string'
    },
    InstanceMarketOptions={
        'MarketType': 'spot',
        'SpotOptions': {
            'MaxPrice': 'string',
            'SpotInstanceType': 'one-time'|'persistent',
            'BlockDurationMinutes': 123,
            'ValidUntil': datetime(2015, 1, 1),
            'InstanceInterruptionBehavior': 'hibernate'|'stop'|'terminate'
        }
    },
    CreditSpecification={
        'CpuCredits': 'string'
    },
    CpuOptions={
        'CoreCount': 123,
        'ThreadsPerCore': 123,
        'AmdSevSnp': 'enabled'|'disabled'
    },
    CapacityReservationSpecification={
        'CapacityReservationPreference': 'open'|'none',
        'CapacityReservationTarget': {
            'CapacityReservationId': 'string',
            'CapacityReservationResourceGroupArn': 'string'
        }
    },
    HibernationOptions={
        'Configured': True|False
    },
    LicenseSpecifications=[
        {
            'LicenseConfigurationArn': 'string'
        },
    ],
    MetadataOptions={
        'HttpTokens': 'optional'|'required',
        'HttpPutResponseHopLimit': 123,
        'HttpEndpoint': 'disabled'|'enabled',
        'HttpProtocolIpv6': 'disabled'|'enabled',
        'InstanceMetadataTags': 'disabled'|'enabled'
    },
    EnclaveOptions={
        'Enabled': True|False
    },
    PrivateDnsNameOptions={
        'HostnameType': 'ip-name'|'resource-name',
        'EnableResourceNameDnsARecord': True|False,
        'EnableResourceNameDnsAAAARecord': True|False
    },
    MaintenanceOptions={
        'AutoRecovery': 'disabled'|'default'
    },
    DisableApiStop=True|False,
    EnablePrimaryIpv6=True|False
)
Parameters:
  • BlockDeviceMappings (list) –

    The block device mapping, which defines the EBS volumes and instance store volumes to attach to the instance at launch. For more information, see Block device mappings in the Amazon EC2 User Guide.

    • (dict) –

      Describes a block device mapping, which defines the EBS volumes and instance store volumes to attach to an instance at launch.

      • DeviceName (string) –

        The device name (for example, /dev/sdh or xvdh).

      • VirtualName (string) –

        The virtual device name ( ephemeral``N). Instance store volumes are numbered starting from 0. An instance type with 2 available instance store volumes can specify mappings for ``ephemeral0 and ephemeral1. The number of available instance store volumes depends on the instance type. After you connect to the instance, you must mount the volume.

        NVMe instance store volumes are automatically enumerated and assigned a device name. Including them in your block device mapping has no effect.

        Constraints: For M3 instances, you must specify instance store volumes in the block device mapping for the instance. When you launch an M3 instance, we ignore any instance store volumes specified in the block device mapping for the AMI.

      • Ebs (dict) –

        Parameters used to automatically set up EBS volumes when the instance is launched.

        • DeleteOnTermination (boolean) –

          Indicates whether the EBS volume is deleted on instance termination. For more information, see Preserving Amazon EBS volumes on instance termination in the Amazon EC2 User Guide.

        • Iops (integer) –

          The number of I/O operations per second (IOPS). For gp3, io1, and io2 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting.

          The following are the supported values for each volume type:

          • gp3: 3,000-16,000 IOPS

          • io1: 100-64,000 IOPS

          • io2: 100-64,000 IOPS

          For io1 and io2 volumes, we guarantee 64,000 IOPS only for Instances built on the Nitro System. Other instance families guarantee performance up to 32,000 IOPS.

          This parameter is required for io1 and io2 volumes. The default for gp3 volumes is 3,000 IOPS. This parameter is not supported for gp2, st1, sc1, or standard volumes.

        • SnapshotId (string) –

          The ID of the snapshot.

        • VolumeSize (integer) –

          The size of the volume, in GiBs. You must specify either a snapshot ID or a volume size. If you specify a snapshot, the default is the snapshot size. You can specify a volume size that is equal to or larger than the snapshot size.

          The following are the supported volumes sizes for each volume type:

          • gp2 and gp3:1-16,384

          • io1 and io2: 4-16,384

          • st1 and sc1: 125-16,384

          • standard: 1-1,024

        • VolumeType (string) –

          The volume type. For more information, see Amazon EBS volume types in the Amazon EC2 User Guide. If the volume type is io1 or io2, you must specify the IOPS that the volume supports.

        • KmsKeyId (string) –

          Identifier (key ID, key alias, ID ARN, or alias ARN) for a customer managed CMK under which the EBS volume is encrypted.

          This parameter is only supported on BlockDeviceMapping objects called by RunInstances, RequestSpotFleet, and RequestSpotInstances.

        • Throughput (integer) –

          The throughput that the volume supports, in MiB/s.

          This parameter is valid only for gp3 volumes.

          Valid Range: Minimum value of 125. Maximum value of 1000.

        • OutpostArn (string) –

          The ARN of the Outpost on which the snapshot is stored.

          This parameter is not supported when using CreateImage.

        • Encrypted (boolean) –

          Indicates whether the encryption state of an EBS volume is changed while being restored from a backing snapshot. The effect of setting the encryption state to true depends on the volume origin (new or from a snapshot), starting encryption state, ownership, and whether encryption by default is enabled. For more information, see Amazon EBS encryption in the Amazon EC2 User Guide.

          In no case can you remove encryption from an encrypted volume.

          Encrypted volumes can only be attached to instances that support Amazon EBS encryption. For more information, see Supported instance types.

          This parameter is not returned by DescribeImageAttribute.

          For CreateImage and RegisterImage, whether you can include this parameter, and the allowed values differ depending on the type of block device mapping you are creating.

          • If you are creating a block device mapping for a new (empty) volume, you can include this parameter, and specify either true for an encrypted volume, or false for an unencrypted volume. If you omit this parameter, it defaults to false (unencrypted).

          • If you are creating a block device mapping from an existing encrypted or unencrypted snapshot, you must omit this parameter. If you include this parameter, the request will fail, regardless of the value that you specify.

          • If you are creating a block device mapping from an existing unencrypted volume, you can include this parameter, but you must specify false. If you specify true, the request will fail. In this case, we recommend that you omit the parameter.

          • If you are creating a block device mapping from an existing encrypted volume, you can include this parameter, and specify either true or false. However, if you specify false, the parameter is ignored and the block device mapping is always encrypted. In this case, we recommend that you omit the parameter.

      • NoDevice (string) –

        To omit the device from the block device mapping, specify an empty string. When this property is specified, the device is removed from the block device mapping regardless of the assigned value.

  • ImageId (string) – The ID of the AMI. An AMI ID is required to launch an instance and must be specified here or in a launch template.

  • InstanceType (string) – The instance type. For more information, see Instance types in the Amazon EC2 User Guide.

  • Ipv6AddressCount (integer) –

    The number of IPv6 addresses to associate with the primary network interface. Amazon EC2 chooses the IPv6 addresses from the range of your subnet. You cannot specify this option and the option to assign specific IPv6 addresses in the same request. You can specify this option if you’ve specified a minimum number of instances to launch.

    You cannot specify this option and the network interfaces option in the same request.

  • Ipv6Addresses (list) –

    The IPv6 addresses from the range of the subnet to associate with the primary network interface. You cannot specify this option and the option to assign a number of IPv6 addresses in the same request. You cannot specify this option if you’ve specified a minimum number of instances to launch.

    You cannot specify this option and the network interfaces option in the same request.

    • (dict) –

      Describes an IPv6 address.

      • Ipv6Address (string) –

        The IPv6 address.

      • IsPrimaryIpv6 (boolean) –

        Determines if an IPv6 address associated with a network interface is the primary IPv6 address. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. For more information, see RunInstances.

  • KernelId (string) –

    The ID of the kernel.

    Warning

    We recommend that you use PV-GRUB instead of kernels and RAM disks. For more information, see PV-GRUB in the Amazon EC2 User Guide.

  • KeyName (string) –

    The name of the key pair. You can create a key pair using CreateKeyPair or ImportKeyPair.

    Warning

    If you do not specify a key pair, you can’t connect to the instance unless you choose an AMI that is configured to allow users another way to log in.

  • MaxCount (integer) –

    [REQUIRED]

    The maximum number of instances to launch. If you specify more instances than Amazon EC2 can launch in the target Availability Zone, Amazon EC2 launches the largest possible number of instances above MinCount.

    Constraints: Between 1 and the maximum number you’re allowed for the specified instance type. For more information about the default limits, and how to request an increase, see How many instances can I run in Amazon EC2 in the Amazon EC2 FAQ.

  • MinCount (integer) –

    [REQUIRED]

    The minimum number of instances to launch. If you specify a minimum that is more instances than Amazon EC2 can launch in the target Availability Zone, Amazon EC2 launches no instances.

    Constraints: Between 1 and the maximum number you’re allowed for the specified instance type. For more information about the default limits, and how to request an increase, see How many instances can I run in Amazon EC2 in the Amazon EC2 General FAQ.

  • Monitoring (dict) –

    Specifies whether detailed monitoring is enabled for the instance.

    • Enabled (boolean) – [REQUIRED]

      Indicates whether detailed monitoring is enabled. Otherwise, basic monitoring is enabled.

  • Placement (dict) –

    The placement for the instance.

    • AvailabilityZone (string) –

      The Availability Zone of the instance.

      If not specified, an Availability Zone will be automatically chosen for you based on the load balancing criteria for the Region.

      This parameter is not supported for CreateFleet.

    • Affinity (string) –

      The affinity setting for the instance on the Dedicated Host.

      This parameter is not supported for CreateFleet or ImportInstance.

    • GroupName (string) –

      The name of the placement group that the instance is in. If you specify GroupName, you can’t specify GroupId.

    • PartitionNumber (integer) –

      The number of the partition that the instance is in. Valid only if the placement group strategy is set to partition.

      This parameter is not supported for CreateFleet.

    • HostId (string) –

      The ID of the Dedicated Host on which the instance resides.

      This parameter is not supported for CreateFleet or ImportInstance.

    • Tenancy (string) –

      The tenancy of the instance. An instance with a tenancy of dedicated runs on single-tenant hardware.

      This parameter is not supported for CreateFleet. The host tenancy is not supported for ImportInstance or for T3 instances that are configured for the unlimited CPU credit option.

    • SpreadDomain (string) –

      Reserved for future use.

    • HostResourceGroupArn (string) –

      The ARN of the host resource group in which to launch the instances.

      If you specify this parameter, either omit the Tenancy parameter or set it to host.

      This parameter is not supported for CreateFleet.

    • GroupId (string) –

      The ID of the placement group that the instance is in. If you specify GroupId, you can’t specify GroupName.

  • RamdiskId (string) –

    The ID of the RAM disk to select. Some kernels require additional drivers at launch. Check the kernel requirements for information about whether you need to specify a RAM disk. To find kernel requirements, go to the Amazon Web Services Resource Center and search for the kernel ID.

    Warning

    We recommend that you use PV-GRUB instead of kernels and RAM disks. For more information, see PV-GRUB in the Amazon EC2 User Guide.

  • SecurityGroupIds (list) –

    The IDs of the security groups. You can create a security group using CreateSecurityGroup.

    If you specify a network interface, you must specify any security groups as part of the network interface.

    • (string) –

  • SecurityGroups (list) –

    [Default VPC] The names of the security groups.

    If you specify a network interface, you must specify any security groups as part of the network interface.

    Default: Amazon EC2 uses the default security group.

    • (string) –

  • UserData (string) –

    The user data script to make available to the instance. For more information, see Run commands on your Linux instance at launch and Run commands on your Windows instance at launch. If you are using a command line tool, base64-encoding is performed for you, and you can load the text from a file. Otherwise, you must provide base64-encoded text. User data is limited to 16 KB.

    This value will be base64 encoded automatically. Do not base64 encode this value prior to performing the operation.

  • AdditionalInfo (string) – Reserved.

  • ClientToken (string) –

    Unique, case-sensitive identifier you provide to ensure the idempotency of the request. If you do not specify a client token, a randomly generated token is used for the request to ensure idempotency.

    For more information, see Ensuring Idempotency.

    Constraints: Maximum 64 ASCII characters

    This field is autopopulated if not provided.

  • DisableApiTermination (boolean) –

    If you set this parameter to true, you can’t terminate the instance using the Amazon EC2 console, CLI, or API; otherwise, you can. To change this attribute after launch, use ModifyInstanceAttribute. Alternatively, if you set InstanceInitiatedShutdownBehavior to terminate, you can terminate the instance by running the shutdown command from the instance.

    Default: false

  • DryRun (boolean) – Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

  • EbsOptimized (boolean) –

    Indicates whether the instance is optimized for Amazon EBS I/O. This optimization provides dedicated throughput to Amazon EBS and an optimized configuration stack to provide optimal Amazon EBS I/O performance. This optimization isn’t available with all instance types. Additional usage charges apply when using an EBS-optimized instance.

    Default: false

  • IamInstanceProfile (dict) –

    The name or Amazon Resource Name (ARN) of an IAM instance profile.

    • Arn (string) –

      The Amazon Resource Name (ARN) of the instance profile.

    • Name (string) –

      The name of the instance profile.

  • InstanceInitiatedShutdownBehavior (string) –

    Indicates whether an instance stops or terminates when you initiate shutdown from the instance (using the operating system command for system shutdown).

    Default: stop

  • NetworkInterfaces (list) –

    The network interfaces to associate with the instance. If you specify a network interface, you must specify any security groups and subnets as part of the network interface.

    • (dict) –

      Describes a network interface.

      • AssociatePublicIpAddress (boolean) –

        Indicates whether to assign a public IPv4 address to an instance you launch in a VPC. The public IP address can only be assigned to a network interface for eth0, and can only be assigned to a new network interface, not an existing one. You cannot specify more than one network interface in the request. If launching into a default subnet, the default value is true.

      • DeleteOnTermination (boolean) –

        If set to true, the interface is deleted when the instance is terminated. You can specify true only if creating a new network interface when launching an instance.

      • Description (string) –

        The description of the network interface. Applies only if creating a network interface when launching an instance.

      • DeviceIndex (integer) –

        The position of the network interface in the attachment order. A primary network interface has a device index of 0.

        If you specify a network interface when launching an instance, you must specify the device index.

      • Groups (list) –

        The IDs of the security groups for the network interface. Applies only if creating a network interface when launching an instance.

        • (string) –

      • Ipv6AddressCount (integer) –

        A number of IPv6 addresses to assign to the network interface. Amazon EC2 chooses the IPv6 addresses from the range of the subnet. You cannot specify this option and the option to assign specific IPv6 addresses in the same request. You can specify this option if you’ve specified a minimum number of instances to launch.

      • Ipv6Addresses (list) –

        The IPv6 addresses to assign to the network interface. You cannot specify this option and the option to assign a number of IPv6 addresses in the same request. You cannot specify this option if you’ve specified a minimum number of instances to launch.

        • (dict) –

          Describes an IPv6 address.

          • Ipv6Address (string) –

            The IPv6 address.

          • IsPrimaryIpv6 (boolean) –

            Determines if an IPv6 address associated with a network interface is the primary IPv6 address. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. For more information, see RunInstances.

      • NetworkInterfaceId (string) –

        The ID of the network interface.

        If you are creating a Spot Fleet, omit this parameter because you can’t specify a network interface ID in a launch specification.

      • PrivateIpAddress (string) –

        The private IPv4 address of the network interface. Applies only if creating a network interface when launching an instance. You cannot specify this option if you’re launching more than one instance in a RunInstances request.

      • PrivateIpAddresses (list) –

        The private IPv4 addresses to assign to the network interface. Only one private IPv4 address can be designated as primary. You cannot specify this option if you’re launching more than one instance in a RunInstances request.

        • (dict) –

          Describes a secondary private IPv4 address for a network interface.

          • Primary (boolean) –

            Indicates whether the private IPv4 address is the primary private IPv4 address. Only one IPv4 address can be designated as primary.

          • PrivateIpAddress (string) –

            The private IPv4 address.

      • SecondaryPrivateIpAddressCount (integer) –

        The number of secondary private IPv4 addresses. You can’t specify this option and specify more than one private IP address using the private IP addresses option. You cannot specify this option if you’re launching more than one instance in a RunInstances request.

      • SubnetId (string) –

        The ID of the subnet associated with the network interface. Applies only if creating a network interface when launching an instance.

      • AssociateCarrierIpAddress (boolean) –

        Indicates whether to assign a carrier IP address to the network interface.

        You can only assign a carrier IP address to a network interface that is in a subnet in a Wavelength Zone. For more information about carrier IP addresses, see Carrier IP address in the Amazon Web Services Wavelength Developer Guide.

      • InterfaceType (string) –

        The type of network interface.

        Valid values: interface | efa

      • NetworkCardIndex (integer) –

        The index of the network card. Some instance types support multiple network cards. The primary network interface must be assigned to network card index 0. The default is network card index 0.

        If you are using RequestSpotInstances to create Spot Instances, omit this parameter because you can’t specify the network card index when using this API. To specify the network card index, use RunInstances.

      • Ipv4Prefixes (list) –

        The IPv4 delegated prefixes to be assigned to the network interface. You cannot use this option if you use the Ipv4PrefixCount option.

      • Ipv4PrefixCount (integer) –

        The number of IPv4 delegated prefixes to be automatically assigned to the network interface. You cannot use this option if you use the Ipv4Prefix option.

      • Ipv6Prefixes (list) –

        The IPv6 delegated prefixes to be assigned to the network interface. You cannot use this option if you use the Ipv6PrefixCount option.

        • (dict) –

          Describes the IPv4 prefix option for a network interface.

          • Ipv6Prefix (string) –

            The IPv6 prefix.

      • Ipv6PrefixCount (integer) –

        The number of IPv6 delegated prefixes to be automatically assigned to the network interface. You cannot use this option if you use the Ipv6Prefix option.

      • PrimaryIpv6 (boolean) –

        The primary IPv6 address of the network interface. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. For more information about primary IPv6 addresses, see RunInstances.

  • PrivateIpAddress (string) –

    The primary IPv4 address. You must specify a value from the IPv4 address range of the subnet.

    Only one private IP address can be designated as primary. You can’t specify this option if you’ve specified the option to designate a private IP address as the primary IP address in a network interface specification. You cannot specify this option if you’re launching more than one instance in the request.

    You cannot specify this option and the network interfaces option in the same request.

  • ElasticGpuSpecification (list) –

    An elastic GPU to associate with the instance. An Elastic GPU is a GPU resource that you can attach to your Windows instance to accelerate the graphics performance of your applications. For more information, see Amazon EC2 Elastic GPUs in the Amazon EC2 User Guide.

    • (dict) –

      A specification for an Elastic Graphics accelerator.

      • Type (string) – [REQUIRED]

        The type of Elastic Graphics accelerator. For more information about the values to specify for Type, see Elastic Graphics Basics, specifically the Elastic Graphics accelerator column, in the Amazon Elastic Compute Cloud User Guide for Windows Instances.

  • ElasticInferenceAccelerators (list) –

    An elastic inference accelerator to associate with the instance. Elastic inference accelerators are a resource you can attach to your Amazon EC2 instances to accelerate your Deep Learning (DL) inference workloads.

    You cannot specify accelerators from different generations in the same request.

    Note

    Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and will help current customers migrate their workloads to options that offer better price and performance. After April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon SageMaker, Amazon ECS, or Amazon EC2. However, customers who have used Amazon EI at least once during the past 30-day period are considered current customers and will be able to continue using the service.

    • (dict) –

      Describes an elastic inference accelerator.

      • Type (string) – [REQUIRED]

        The type of elastic inference accelerator. The possible values are eia1.medium, eia1.large, eia1.xlarge, eia2.medium, eia2.large, and eia2.xlarge.

      • Count (integer) –

        The number of elastic inference accelerators to attach to the instance.

        Default: 1

  • TagSpecifications (list) –

    The tags to apply to the resources that are created during instance launch.

    You can specify tags for the following resources only:

    • Instances

    • Volumes

    • Elastic graphics

    • Spot Instance requests

    • Network interfaces

    To tag a resource after it has been created, see CreateTags.

    • (dict) –

      The tags to apply to a resource when the resource is being created. When you specify a tag, you must specify the resource type to tag, otherwise the request will fail.

      Note

      The Valid Values lists all the resource types that can be tagged. However, the action you’re using might not support tagging all of these resource types. If you try to tag a resource type that is unsupported for the action you’re using, you’ll get an error.

      • ResourceType (string) –

        The type of resource to tag on creation.

      • Tags (list) –

        The tags to apply to the resource.

        • (dict) –

          Describes a tag.

          • Key (string) –

            The key of the tag.

            Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.

          • Value (string) –

            The value of the tag.

            Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.

  • LaunchTemplate (dict) –

    The launch template to use to launch the instances. Any parameters that you specify in RunInstances override the same parameters in the launch template. You can specify either the name or ID of a launch template, but not both.

    • LaunchTemplateId (string) –

      The ID of the launch template.

      You must specify the LaunchTemplateId or the LaunchTemplateName, but not both.

    • LaunchTemplateName (string) –

      The name of the launch template.

      You must specify the LaunchTemplateName or the LaunchTemplateId, but not both.

    • Version (string) –

      The launch template version number, $Latest, or $Default.

      If the value is $Latest, Amazon EC2 uses the latest version of the launch template.

      If the value is $Default, Amazon EC2 uses the default version of the launch template.

      Default: The default version of the launch template.

  • InstanceMarketOptions (dict) –

    The market (purchasing) option for the instances.

    For RunInstances, persistent Spot Instance requests are only supported when InstanceInterruptionBehavior is set to either hibernate or stop.

    • MarketType (string) –

      The market type.

    • SpotOptions (dict) –

      The options for Spot Instances.

      • MaxPrice (string) –

        The maximum hourly price that you’re willing to pay for a Spot Instance. We do not recommend using this parameter because it can lead to increased interruptions. If you do not specify this parameter, you will pay the current Spot price.

        Warning

        If you specify a maximum price, your Spot Instances will be interrupted more frequently than if you do not specify this parameter.

      • SpotInstanceType (string) –

        The Spot Instance request type. For RunInstances, persistent Spot Instance requests are only supported when the instance interruption behavior is either hibernate or stop.

      • BlockDurationMinutes (integer) –

        Deprecated.

      • ValidUntil (datetime) –

        The end date of the request, in UTC format (YYYY-MM-DD*T*HH:MM:*SS*Z). Supported only for persistent requests.

        • For a persistent request, the request remains active until the ValidUntil date and time is reached. Otherwise, the request remains active until you cancel it.

        • For a one-time request, ValidUntil is not supported. The request remains active until all instances launch or you cancel the request.

      • InstanceInterruptionBehavior (string) –

        The behavior when a Spot Instance is interrupted. The default is terminate.

  • CreditSpecification (dict) –

    The credit option for CPU usage of the burstable performance instance. Valid values are standard and unlimited. To change this attribute after launch, use ModifyInstanceCreditSpecification. For more information, see Burstable performance instances in the Amazon EC2 User Guide.

    Default: standard (T2 instances) or unlimited (T3/T3a/T4g instances)

    For T3 instances with host tenancy, only standard is supported.

    • CpuCredits (string) – [REQUIRED]

      The credit option for CPU usage of a T instance.

      Valid values: standard | unlimited

  • CpuOptions (dict) –

    The CPU options for the instance. For more information, see Optimize CPU options in the Amazon EC2 User Guide.

    • CoreCount (integer) –

      The number of CPU cores for the instance.

    • ThreadsPerCore (integer) –

      The number of threads per CPU core. To disable multithreading for the instance, specify a value of 1. Otherwise, specify the default value of 2.

    • AmdSevSnp (string) –

      Indicates whether to enable the instance for AMD SEV-SNP. AMD SEV-SNP is supported with M6a, R6a, and C6a instance types only. For more information, see AMD SEV-SNP.

  • CapacityReservationSpecification (dict) –

    Information about the Capacity Reservation targeting option. If you do not specify this parameter, the instance’s Capacity Reservation preference defaults to open, which enables it to run in any open Capacity Reservation that has matching attributes (instance type, platform, Availability Zone).

    • CapacityReservationPreference (string) –

      Indicates the instance’s Capacity Reservation preferences. Possible preferences include:

      • open - The instance can run in any open Capacity Reservation that has matching attributes (instance type, platform, Availability Zone).

      • none - The instance avoids running in a Capacity Reservation even if one is available. The instance runs as an On-Demand Instance.

    • CapacityReservationTarget (dict) –

      Information about the target Capacity Reservation or Capacity Reservation group.

      • CapacityReservationId (string) –

        The ID of the Capacity Reservation in which to run the instance.

      • CapacityReservationResourceGroupArn (string) –

        The ARN of the Capacity Reservation resource group in which to run the instance.

  • HibernationOptions (dict) –

    Indicates whether an instance is enabled for hibernation. This parameter is valid only if the instance meets the hibernation prerequisites. For more information, see Hibernate your instance in the Amazon EC2 User Guide.

    You can’t enable hibernation and Amazon Web Services Nitro Enclaves on the same instance.

    • Configured (boolean) –

      Set to true to enable your instance for hibernation.

      Default: false

  • LicenseSpecifications (list) –

    The license configurations.

    • (dict) –

      Describes a license configuration.

      • LicenseConfigurationArn (string) –

        The Amazon Resource Name (ARN) of the license configuration.

  • MetadataOptions (dict) –

    The metadata options for the instance. For more information, see Instance metadata and user data.

    • HttpTokens (string) –

      IMDSv2 uses token-backed sessions. Set the use of HTTP tokens to optional (in other words, set the use of IMDSv2 to optional) or required (in other words, set the use of IMDSv2 to required).

      • optional - When IMDSv2 is optional, you can choose to retrieve instance metadata with or without a session token in your request. If you retrieve the IAM role credentials without a token, the IMDSv1 role credentials are returned. If you retrieve the IAM role credentials using a valid session token, the IMDSv2 role credentials are returned.

      • required - When IMDSv2 is required, you must send a session token with any instance metadata retrieval requests. In this state, retrieving the IAM role credentials always returns IMDSv2 credentials; IMDSv1 credentials are not available.

      Default: optional

    • HttpPutResponseHopLimit (integer) –

      The desired HTTP PUT response hop limit for instance metadata requests. The larger the number, the further instance metadata requests can travel.

      Default: 1

      Possible values: Integers from 1 to 64

    • HttpEndpoint (string) –

      Enables or disables the HTTP metadata endpoint on your instances.

      If you specify a value of disabled, you cannot access your instance metadata.

      Default: enabled

    • HttpProtocolIpv6 (string) –

      Enables or disables the IPv6 endpoint for the instance metadata service.

    • InstanceMetadataTags (string) –

      Set to enabled to allow access to instance tags from the instance metadata. Set to disabled to turn off access to instance tags from the instance metadata. For more information, see Work with instance tags using the instance metadata.

      Default: disabled

  • EnclaveOptions (dict) –

    Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves. For more information, see What is Amazon Web Services Nitro Enclaves? in the Amazon Web Services Nitro Enclaves User Guide.

    You can’t enable Amazon Web Services Nitro Enclaves and hibernation on the same instance.

    • Enabled (boolean) –

      To enable the instance for Amazon Web Services Nitro Enclaves, set this parameter to true.

  • PrivateDnsNameOptions (dict) –

    The options for the instance hostname. The default values are inherited from the subnet. Applies only if creating a network interface, not attaching an existing one.

    • HostnameType (string) –

      The type of hostname for EC2 instances. For IPv4 only subnets, an instance DNS name must be based on the instance IPv4 address. For IPv6 only subnets, an instance DNS name must be based on the instance ID. For dual-stack subnets, you can specify whether DNS names use the instance IPv4 address or the instance ID.

    • EnableResourceNameDnsARecord (boolean) –

      Indicates whether to respond to DNS queries for instance hostnames with DNS A records.

    • EnableResourceNameDnsAAAARecord (boolean) –

      Indicates whether to respond to DNS queries for instance hostnames with DNS AAAA records.

  • MaintenanceOptions (dict) –

    The maintenance and recovery options for the instance.

    • AutoRecovery (string) –

      Disables the automatic recovery behavior of your instance or sets it to default. For more information, see Simplified automatic recovery.

  • DisableApiStop (boolean) – Indicates whether an instance is enabled for stop protection. For more information, see Stop protection.

  • EnablePrimaryIpv6 (boolean) – If you’re launching an instance into a dual-stack or IPv6-only subnet, you can enable assigning a primary IPv6 address. A primary IPv6 address is an IPv6 GUA address associated with an ENI that you have enabled to use a primary IPv6 address. Use this option if an instance relies on its IPv6 address not changing. When you launch the instance, Amazon Web Services will automatically assign an IPv6 address associated with the ENI attached to your instance to be the primary IPv6 address. Once you enable an IPv6 GUA address to be a primary IPv6, you cannot disable it. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. If you have multiple IPv6 addresses associated with an ENI attached to your instance and you enable a primary IPv6 address, the first IPv6 GUA address associated with the ENI becomes the primary IPv6 address.

Return type:

list(ec2.Instance)

Returns:

A list of Instance resources