DatabaseMigrationService / Client / describe_endpoints
describe_endpoints#
- DatabaseMigrationService.Client.describe_endpoints(**kwargs)#
Returns information about the endpoints for your account in the current region.
See also: AWS API Documentation
Request Syntax
response = client.describe_endpoints( Filters=[ { 'Name': 'string', 'Values': [ 'string', ] }, ], MaxRecords=123, Marker='string' )
- Parameters:
Filters (list) –
Filters applied to the endpoints.
Valid filter names: endpoint-arn | endpoint-type | endpoint-id | engine-name
(dict) –
Identifies the name and value of a filter object. This filter is used to limit the number and type of DMS objects that are returned for a particular
Describe*
call or similar operation. Filters are used as an optional parameter for certain API operations.Name (string) – [REQUIRED]
The name of the filter as specified for a
Describe*
or similar operation.Values (list) – [REQUIRED]
The filter value, which can specify one or more values used to narrow the returned results.
(string) –
MaxRecords (integer) –
The maximum number of records to include in the response. If more records exist than the specified
MaxRecords
value, a pagination token called a marker is included in the response so that the remaining results can be retrieved.Default: 100
Constraints: Minimum 20, maximum 100.
Marker (string) – An optional pagination token provided by a previous request. If this parameter is specified, the response includes only records beyond the marker, up to the value specified by
MaxRecords
.
- Return type:
dict
- Returns:
Response Syntax
{ 'Marker': 'string', 'Endpoints': [ { 'EndpointIdentifier': 'string', 'EndpointType': 'source'|'target', 'EngineName': 'string', 'EngineDisplayName': 'string', 'Username': 'string', 'ServerName': 'string', 'Port': 123, 'DatabaseName': 'string', 'ExtraConnectionAttributes': 'string', 'Status': 'string', 'KmsKeyId': 'string', 'EndpointArn': 'string', 'CertificateArn': 'string', 'SslMode': 'none'|'require'|'verify-ca'|'verify-full', 'ServiceAccessRoleArn': 'string', 'ExternalTableDefinition': 'string', 'ExternalId': 'string', 'DynamoDbSettings': { 'ServiceAccessRoleArn': 'string' }, 'S3Settings': { 'ServiceAccessRoleArn': 'string', 'ExternalTableDefinition': 'string', 'CsvRowDelimiter': 'string', 'CsvDelimiter': 'string', 'BucketFolder': 'string', 'BucketName': 'string', 'CompressionType': 'none'|'gzip', 'EncryptionMode': 'sse-s3'|'sse-kms', 'ServerSideEncryptionKmsKeyId': 'string', 'DataFormat': 'csv'|'parquet', 'EncodingType': 'plain'|'plain-dictionary'|'rle-dictionary', 'DictPageSizeLimit': 123, 'RowGroupLength': 123, 'DataPageSize': 123, 'ParquetVersion': 'parquet-1-0'|'parquet-2-0', 'EnableStatistics': True|False, 'IncludeOpForFullLoad': True|False, 'CdcInsertsOnly': True|False, 'TimestampColumnName': 'string', 'ParquetTimestampInMillisecond': True|False, 'CdcInsertsAndUpdates': True|False, 'DatePartitionEnabled': True|False, 'DatePartitionSequence': 'YYYYMMDD'|'YYYYMMDDHH'|'YYYYMM'|'MMYYYYDD'|'DDMMYYYY', 'DatePartitionDelimiter': 'SLASH'|'UNDERSCORE'|'DASH'|'NONE', 'UseCsvNoSupValue': True|False, 'CsvNoSupValue': 'string', 'PreserveTransactions': True|False, 'CdcPath': 'string', 'UseTaskStartTimeForFullLoadTimestamp': True|False, 'CannedAclForObjects': 'none'|'private'|'public-read'|'public-read-write'|'authenticated-read'|'aws-exec-read'|'bucket-owner-read'|'bucket-owner-full-control', 'AddColumnName': True|False, 'CdcMaxBatchInterval': 123, 'CdcMinFileSize': 123, 'CsvNullValue': 'string', 'IgnoreHeaderRows': 123, 'MaxFileSize': 123, 'Rfc4180': True|False, 'DatePartitionTimezone': 'string', 'AddTrailingPaddingCharacter': True|False, 'ExpectedBucketOwner': 'string', 'GlueCatalogGeneration': True|False }, 'DmsTransferSettings': { 'ServiceAccessRoleArn': 'string', 'BucketName': 'string' }, 'MongoDbSettings': { 'Username': 'string', 'Password': 'string', 'ServerName': 'string', 'Port': 123, 'DatabaseName': 'string', 'AuthType': 'no'|'password', 'AuthMechanism': 'default'|'mongodb_cr'|'scram_sha_1', 'NestingLevel': 'none'|'one', 'ExtractDocId': 'string', 'DocsToInvestigate': 'string', 'AuthSource': 'string', 'KmsKeyId': 'string', 'SecretsManagerAccessRoleArn': 'string', 'SecretsManagerSecretId': 'string', 'UseUpdateLookUp': True|False, 'ReplicateShardCollections': True|False }, 'KinesisSettings': { 'StreamArn': 'string', 'MessageFormat': 'json'|'json-unformatted', 'ServiceAccessRoleArn': 'string', 'IncludeTransactionDetails': True|False, 'IncludePartitionValue': True|False, 'PartitionIncludeSchemaTable': True|False, 'IncludeTableAlterOperations': True|False, 'IncludeControlDetails': True|False, 'IncludeNullAndEmpty': True|False, 'NoHexPrefix': True|False }, 'KafkaSettings': { 'Broker': 'string', 'Topic': 'string', 'MessageFormat': 'json'|'json-unformatted', 'IncludeTransactionDetails': True|False, 'IncludePartitionValue': True|False, 'PartitionIncludeSchemaTable': True|False, 'IncludeTableAlterOperations': True|False, 'IncludeControlDetails': True|False, 'MessageMaxBytes': 123, 'IncludeNullAndEmpty': True|False, 'SecurityProtocol': 'plaintext'|'ssl-authentication'|'ssl-encryption'|'sasl-ssl', 'SslClientCertificateArn': 'string', 'SslClientKeyArn': 'string', 'SslClientKeyPassword': 'string', 'SslCaCertificateArn': 'string', 'SaslUsername': 'string', 'SaslPassword': 'string', 'NoHexPrefix': True|False, 'SaslMechanism': 'scram-sha-512'|'plain', 'SslEndpointIdentificationAlgorithm': 'none'|'https' }, 'ElasticsearchSettings': { 'ServiceAccessRoleArn': 'string', 'EndpointUri': 'string', 'FullLoadErrorPercentage': 123, 'ErrorRetryDuration': 123, 'UseNewMappingType': True|False }, 'NeptuneSettings': { 'ServiceAccessRoleArn': 'string', 'S3BucketName': 'string', 'S3BucketFolder': 'string', 'ErrorRetryDuration': 123, 'MaxFileSize': 123, 'MaxRetryCount': 123, 'IamAuthEnabled': True|False }, 'RedshiftSettings': { 'AcceptAnyDate': True|False, 'AfterConnectScript': 'string', 'BucketFolder': 'string', 'BucketName': 'string', 'CaseSensitiveNames': True|False, 'CompUpdate': True|False, 'ConnectionTimeout': 123, 'DatabaseName': 'string', 'DateFormat': 'string', 'EmptyAsNull': True|False, 'EncryptionMode': 'sse-s3'|'sse-kms', 'ExplicitIds': True|False, 'FileTransferUploadStreams': 123, 'LoadTimeout': 123, 'MaxFileSize': 123, 'Password': 'string', 'Port': 123, 'RemoveQuotes': True|False, 'ReplaceInvalidChars': 'string', 'ReplaceChars': 'string', 'ServerName': 'string', 'ServiceAccessRoleArn': 'string', 'ServerSideEncryptionKmsKeyId': 'string', 'TimeFormat': 'string', 'TrimBlanks': True|False, 'TruncateColumns': True|False, 'Username': 'string', 'WriteBufferSize': 123, 'SecretsManagerAccessRoleArn': 'string', 'SecretsManagerSecretId': 'string', 'MapBooleanAsBoolean': True|False }, 'PostgreSQLSettings': { 'AfterConnectScript': 'string', 'CaptureDdls': True|False, 'MaxFileSize': 123, 'DatabaseName': 'string', 'DdlArtifactsSchema': 'string', 'ExecuteTimeout': 123, 'FailTasksOnLobTruncation': True|False, 'HeartbeatEnable': True|False, 'HeartbeatSchema': 'string', 'HeartbeatFrequency': 123, 'Password': 'string', 'Port': 123, 'ServerName': 'string', 'Username': 'string', 'SlotName': 'string', 'PluginName': 'no-preference'|'test-decoding'|'pglogical', 'SecretsManagerAccessRoleArn': 'string', 'SecretsManagerSecretId': 'string', 'TrimSpaceInChar': True|False, 'MapBooleanAsBoolean': True|False, 'MapJsonbAsClob': True|False, 'MapLongVarcharAs': 'wstring'|'clob'|'nclob', 'DatabaseMode': 'default'|'babelfish', 'BabelfishDatabaseName': 'string' }, 'MySQLSettings': { 'AfterConnectScript': 'string', 'CleanSourceMetadataOnMismatch': True|False, 'DatabaseName': 'string', 'EventsPollInterval': 123, 'TargetDbType': 'specific-database'|'multiple-databases', 'MaxFileSize': 123, 'ParallelLoadThreads': 123, 'Password': 'string', 'Port': 123, 'ServerName': 'string', 'ServerTimezone': 'string', 'Username': 'string', 'SecretsManagerAccessRoleArn': 'string', 'SecretsManagerSecretId': 'string' }, 'OracleSettings': { 'AddSupplementalLogging': True|False, 'ArchivedLogDestId': 123, 'AdditionalArchivedLogDestId': 123, 'ExtraArchivedLogDestIds': [ 123, ], 'AllowSelectNestedTables': True|False, 'ParallelAsmReadThreads': 123, 'ReadAheadBlocks': 123, 'AccessAlternateDirectly': True|False, 'UseAlternateFolderForOnline': True|False, 'OraclePathPrefix': 'string', 'UsePathPrefix': 'string', 'ReplacePathPrefix': True|False, 'EnableHomogenousTablespace': True|False, 'DirectPathNoLog': True|False, 'ArchivedLogsOnly': True|False, 'AsmPassword': 'string', 'AsmServer': 'string', 'AsmUser': 'string', 'CharLengthSemantics': 'default'|'char'|'byte', 'DatabaseName': 'string', 'DirectPathParallelLoad': True|False, 'FailTasksOnLobTruncation': True|False, 'NumberDatatypeScale': 123, 'Password': 'string', 'Port': 123, 'ReadTableSpaceName': True|False, 'RetryInterval': 123, 'SecurityDbEncryption': 'string', 'SecurityDbEncryptionName': 'string', 'ServerName': 'string', 'SpatialDataOptionToGeoJsonFunctionName': 'string', 'StandbyDelayTime': 123, 'Username': 'string', 'UseBFile': True|False, 'UseDirectPathFullLoad': True|False, 'UseLogminerReader': True|False, 'SecretsManagerAccessRoleArn': 'string', 'SecretsManagerSecretId': 'string', 'SecretsManagerOracleAsmAccessRoleArn': 'string', 'SecretsManagerOracleAsmSecretId': 'string', 'TrimSpaceInChar': True|False, 'ConvertTimestampWithZoneToUTC': True|False, 'OpenTransactionWindow': 123 }, 'SybaseSettings': { 'DatabaseName': 'string', 'Password': 'string', 'Port': 123, 'ServerName': 'string', 'Username': 'string', 'SecretsManagerAccessRoleArn': 'string', 'SecretsManagerSecretId': 'string' }, 'MicrosoftSQLServerSettings': { 'Port': 123, 'BcpPacketSize': 123, 'DatabaseName': 'string', 'ControlTablesFileGroup': 'string', 'Password': 'string', 'QuerySingleAlwaysOnNode': True|False, 'ReadBackupOnly': True|False, 'SafeguardPolicy': 'rely-on-sql-server-replication-agent'|'exclusive-automatic-truncation'|'shared-automatic-truncation', 'ServerName': 'string', 'Username': 'string', 'UseBcpFullLoad': True|False, 'UseThirdPartyBackupDevice': True|False, 'SecretsManagerAccessRoleArn': 'string', 'SecretsManagerSecretId': 'string', 'TrimSpaceInChar': True|False, 'TlogAccessMode': 'BackupOnly'|'PreferBackup'|'PreferTlog'|'TlogOnly', 'ForceLobLookup': True|False }, 'IBMDb2Settings': { 'DatabaseName': 'string', 'Password': 'string', 'Port': 123, 'ServerName': 'string', 'SetDataCaptureChanges': True|False, 'CurrentLsn': 'string', 'MaxKBytesPerRead': 123, 'Username': 'string', 'SecretsManagerAccessRoleArn': 'string', 'SecretsManagerSecretId': 'string' }, 'DocDbSettings': { 'Username': 'string', 'Password': 'string', 'ServerName': 'string', 'Port': 123, 'DatabaseName': 'string', 'NestingLevel': 'none'|'one', 'ExtractDocId': True|False, 'DocsToInvestigate': 123, 'KmsKeyId': 'string', 'SecretsManagerAccessRoleArn': 'string', 'SecretsManagerSecretId': 'string', 'UseUpdateLookUp': True|False, 'ReplicateShardCollections': True|False }, 'RedisSettings': { 'ServerName': 'string', 'Port': 123, 'SslSecurityProtocol': 'plaintext'|'ssl-encryption', 'AuthType': 'none'|'auth-role'|'auth-token', 'AuthUserName': 'string', 'AuthPassword': 'string', 'SslCaCertificateArn': 'string' }, 'GcpMySQLSettings': { 'AfterConnectScript': 'string', 'CleanSourceMetadataOnMismatch': True|False, 'DatabaseName': 'string', 'EventsPollInterval': 123, 'TargetDbType': 'specific-database'|'multiple-databases', 'MaxFileSize': 123, 'ParallelLoadThreads': 123, 'Password': 'string', 'Port': 123, 'ServerName': 'string', 'ServerTimezone': 'string', 'Username': 'string', 'SecretsManagerAccessRoleArn': 'string', 'SecretsManagerSecretId': 'string' }, 'TimestreamSettings': { 'DatabaseName': 'string', 'MemoryDuration': 123, 'MagneticDuration': 123, 'CdcInsertsAndUpdates': True|False, 'EnableMagneticStoreWrites': True|False } }, ] }
Response Structure
(dict) –
Marker (string) –
An optional pagination token provided by a previous request. If this parameter is specified, the response includes only records beyond the marker, up to the value specified by
MaxRecords
.Endpoints (list) –
Endpoint description.
(dict) –
Describes an endpoint of a database instance in response to operations such as the following:
CreateEndpoint
DescribeEndpoint
ModifyEndpoint
EndpointIdentifier (string) –
The database endpoint identifier. Identifiers must begin with a letter and must contain only ASCII letters, digits, and hyphens. They can’t end with a hyphen or contain two consecutive hyphens.
EndpointType (string) –
The type of endpoint. Valid values are
source
andtarget
.EngineName (string) –
The database engine name. Valid values, depending on the EndpointType, include
"mysql"
,"oracle"
,"postgres"
,"mariadb"
,"aurora"
,"aurora-postgresql"
,"redshift"
,"s3"
,"db2"
,"db2-zos"
,"azuredb"
,"sybase"
,"dynamodb"
,"mongodb"
,"kinesis"
,"kafka"
,"elasticsearch"
,"documentdb"
,"sqlserver"
,"neptune"
, and"babelfish"
.EngineDisplayName (string) –
The expanded name for the engine name. For example, if the
EngineName
parameter is “aurora”, this value would be “Amazon Aurora MySQL”.Username (string) –
The user name used to connect to the endpoint.
ServerName (string) –
The name of the server at the endpoint.
Port (integer) –
The port value used to access the endpoint.
DatabaseName (string) –
The name of the database at the endpoint.
ExtraConnectionAttributes (string) –
Additional connection attributes used to connect to the endpoint.
Status (string) –
The status of the endpoint.
KmsKeyId (string) –
An KMS key identifier that is used to encrypt the connection parameters for the endpoint.
If you don’t specify a value for the
KmsKeyId
parameter, then DMS uses your default encryption key.KMS creates the default encryption key for your Amazon Web Services account. Your Amazon Web Services account has a different default encryption key for each Amazon Web Services Region.
EndpointArn (string) –
The Amazon Resource Name (ARN) string that uniquely identifies the endpoint.
CertificateArn (string) –
The Amazon Resource Name (ARN) used for SSL connection to the endpoint.
SslMode (string) –
The SSL mode used to connect to the endpoint. The default value is
none
.ServiceAccessRoleArn (string) –
The Amazon Resource Name (ARN) used by the service to access the IAM role. The role must allow the
iam:PassRole
action.ExternalTableDefinition (string) –
The external table definition.
ExternalId (string) –
Value returned by a call to CreateEndpoint that can be used for cross-account validation. Use it on a subsequent call to CreateEndpoint to create the endpoint with a cross-account.
DynamoDbSettings (dict) –
The settings for the DynamoDB target endpoint. For more information, see the
DynamoDBSettings
structure.ServiceAccessRoleArn (string) –
The Amazon Resource Name (ARN) used by the service to access the IAM role. The role must allow the
iam:PassRole
action.
S3Settings (dict) –
The settings for the S3 target endpoint. For more information, see the
S3Settings
structure.ServiceAccessRoleArn (string) –
The Amazon Resource Name (ARN) used by the service to access the IAM role. The role must allow the
iam:PassRole
action. It is a required parameter that enables DMS to write and read objects from an S3 bucket.ExternalTableDefinition (string) –
Specifies how tables are defined in the S3 source files only.
CsvRowDelimiter (string) –
The delimiter used to separate rows in the .csv file for both source and target. The default is a carriage return (
\n
).CsvDelimiter (string) –
The delimiter used to separate columns in the .csv file for both source and target. The default is a comma.
BucketFolder (string) –
An optional parameter to set a folder name in the S3 bucket. If provided, tables are created in the path
bucketFolder/schema_name/table_name/
. If this parameter isn’t specified, then the path used isschema_name/table_name/
.BucketName (string) –
The name of the S3 bucket.
CompressionType (string) –
An optional parameter to use GZIP to compress the target files. Set to GZIP to compress the target files. Either set this parameter to NONE (the default) or don’t use it to leave the files uncompressed. This parameter applies to both .csv and .parquet file formats.
EncryptionMode (string) –
The type of server-side encryption that you want to use for your data. This encryption type is part of the endpoint settings or the extra connections attributes for Amazon S3. You can choose either
SSE_S3
(the default) orSSE_KMS
.Note
For the
ModifyEndpoint
operation, you can change the existing value of theEncryptionMode
parameter fromSSE_KMS
toSSE_S3
. But you can’t change the existing value fromSSE_S3
toSSE_KMS
.To use
SSE_S3
, you need an Identity and Access Management (IAM) role with permission to allow"arn:aws:s3:::dms-*"
to use the following actions:s3:CreateBucket
s3:ListBucket
s3:DeleteBucket
s3:GetBucketLocation
s3:GetObject
s3:PutObject
s3:DeleteObject
s3:GetObjectVersion
s3:GetBucketPolicy
s3:PutBucketPolicy
s3:DeleteBucketPolicy
ServerSideEncryptionKmsKeyId (string) –
If you are using
SSE_KMS
for theEncryptionMode
, provide the KMS key ID. The key that you use needs an attached policy that enables Identity and Access Management (IAM) user permissions and allows use of the key.Here is a CLI example:
aws dms create-endpoint --endpoint-identifier value --endpoint-type target --engine-name s3 --s3-settings ServiceAccessRoleArn=value,BucketFolder=value,BucketName=value,EncryptionMode=SSE_KMS,ServerSideEncryptionKmsKeyId=value
DataFormat (string) –
The format of the data that you want to use for output. You can choose one of the following:
csv
: This is a row-based file format with comma-separated values (.csv).parquet
: Apache Parquet (.parquet) is a columnar storage file format that features efficient compression and provides faster query response.
EncodingType (string) –
The type of encoding you are using:
RLE_DICTIONARY
uses a combination of bit-packing and run-length encoding to store repeated values more efficiently. This is the default.PLAIN
doesn’t use encoding at all. Values are stored as they are.PLAIN_DICTIONARY
builds a dictionary of the values encountered in a given column. The dictionary is stored in a dictionary page for each column chunk.
DictPageSizeLimit (integer) –
The maximum size of an encoded dictionary page of a column. If the dictionary page exceeds this, this column is stored using an encoding type of
PLAIN
. This parameter defaults to 1024 * 1024 bytes (1 MiB), the maximum size of a dictionary page before it reverts toPLAIN
encoding. This size is used for .parquet file format only.RowGroupLength (integer) –
The number of rows in a row group. A smaller row group size provides faster reads. But as the number of row groups grows, the slower writes become. This parameter defaults to 10,000 rows. This number is used for .parquet file format only.
If you choose a value larger than the maximum,
RowGroupLength
is set to the max row group length in bytes (64 * 1024 * 1024).DataPageSize (integer) –
The size of one data page in bytes. This parameter defaults to 1024 * 1024 bytes (1 MiB). This number is used for .parquet file format only.
ParquetVersion (string) –
The version of the Apache Parquet format that you want to use:
parquet_1_0
(the default) orparquet_2_0
.EnableStatistics (boolean) –
A value that enables statistics for Parquet pages and row groups. Choose
true
to enable statistics,false
to disable. Statistics includeNULL
,DISTINCT
,MAX
, andMIN
values. This parameter defaults totrue
. This value is used for .parquet file format only.IncludeOpForFullLoad (boolean) –
A value that enables a full load to write INSERT operations to the comma-separated value (.csv) or .parquet output files only to indicate how the rows were added to the source database.
Note
DMS supports the
IncludeOpForFullLoad
parameter in versions 3.1.4 and later.DMS supports the use of the .parquet files with the
IncludeOpForFullLoad
parameter in versions 3.4.7 and later.For full load, records can only be inserted. By default (the
false
setting), no information is recorded in these output files for a full load to indicate that the rows were inserted at the source database. IfIncludeOpForFullLoad
is set totrue
ory
, the INSERT is recorded as an I annotation in the first field of the .csv file. This allows the format of your target records from a full load to be consistent with the target records from a CDC load.Note
This setting works together with the
CdcInsertsOnly
and theCdcInsertsAndUpdates
parameters for output to .csv files only. For more information about how these settings work together, see Indicating Source DB Operations in Migrated S3 Data in the Database Migration Service User Guide..CdcInsertsOnly (boolean) –
A value that enables a change data capture (CDC) load to write only INSERT operations to .csv or columnar storage (.parquet) output files. By default (the
false
setting), the first field in a .csv or .parquet record contains the letter I (INSERT), U (UPDATE), or D (DELETE). These values indicate whether the row was inserted, updated, or deleted at the source database for a CDC load to the target.If
CdcInsertsOnly
is set totrue
ory
, only INSERTs from the source database are migrated to the .csv or .parquet file. For .csv format only, how these INSERTs are recorded depends on the value ofIncludeOpForFullLoad
. IfIncludeOpForFullLoad
is set totrue
, the first field of every CDC record is set to I to indicate the INSERT operation at the source. IfIncludeOpForFullLoad
is set tofalse
, every CDC record is written without a first field to indicate the INSERT operation at the source. For more information about how these settings work together, see Indicating Source DB Operations in Migrated S3 Data in the Database Migration Service User Guide..Note
DMS supports the interaction described preceding between the
CdcInsertsOnly
andIncludeOpForFullLoad
parameters in versions 3.1.4 and later.CdcInsertsOnly
andCdcInsertsAndUpdates
can’t both be set totrue
for the same endpoint. Set eitherCdcInsertsOnly
orCdcInsertsAndUpdates
totrue
for the same endpoint, but not both.TimestampColumnName (string) –
A value that when nonblank causes DMS to add a column with timestamp information to the endpoint data for an Amazon S3 target.
Note
DMS supports the
TimestampColumnName
parameter in versions 3.1.4 and later.DMS includes an additional
STRING
column in the .csv or .parquet object files of your migrated data when you setTimestampColumnName
to a nonblank value.For a full load, each row of this timestamp column contains a timestamp for when the data was transferred from the source to the target by DMS.
For a change data capture (CDC) load, each row of the timestamp column contains the timestamp for the commit of that row in the source database.
The string format for this timestamp column value is
yyyy-MM-dd HH:mm:ss.SSSSSS
. By default, the precision of this value is in microseconds. For a CDC load, the rounding of the precision depends on the commit timestamp supported by DMS for the source database.When the
AddColumnName
parameter is set totrue
, DMS also includes a name for the timestamp column that you set withTimestampColumnName
.ParquetTimestampInMillisecond (boolean) –
A value that specifies the precision of any
TIMESTAMP
column values that are written to an Amazon S3 object file in .parquet format.Note
DMS supports the
ParquetTimestampInMillisecond
parameter in versions 3.1.4 and later.When
ParquetTimestampInMillisecond
is set totrue
ory
, DMS writes allTIMESTAMP
columns in a .parquet formatted file with millisecond precision. Otherwise, DMS writes them with microsecond precision.Currently, Amazon Athena and Glue can handle only millisecond precision for
TIMESTAMP
values. Set this parameter totrue
for S3 endpoint object files that are .parquet formatted only if you plan to query or process the data with Athena or Glue.Note
DMS writes any
TIMESTAMP
column values written to an S3 file in .csv format with microsecond precision.Setting
ParquetTimestampInMillisecond
has no effect on the string format of the timestamp column value that is inserted by setting theTimestampColumnName
parameter.CdcInsertsAndUpdates (boolean) –
A value that enables a change data capture (CDC) load to write INSERT and UPDATE operations to .csv or .parquet (columnar storage) output files. The default setting is
false
, but whenCdcInsertsAndUpdates
is set totrue
ory
, only INSERTs and UPDATEs from the source database are migrated to the .csv or .parquet file.Warning
DMS supports the use of the .parquet files in versions 3.4.7 and later.
How these INSERTs and UPDATEs are recorded depends on the value of the
IncludeOpForFullLoad
parameter. IfIncludeOpForFullLoad
is set totrue
, the first field of every CDC record is set to eitherI
orU
to indicate INSERT and UPDATE operations at the source. But ifIncludeOpForFullLoad
is set tofalse
, CDC records are written without an indication of INSERT or UPDATE operations at the source. For more information about how these settings work together, see Indicating Source DB Operations in Migrated S3 Data in the Database Migration Service User Guide..Note
DMS supports the use of the
CdcInsertsAndUpdates
parameter in versions 3.3.1 and later.CdcInsertsOnly
andCdcInsertsAndUpdates
can’t both be set totrue
for the same endpoint. Set eitherCdcInsertsOnly
orCdcInsertsAndUpdates
totrue
for the same endpoint, but not both.DatePartitionEnabled (boolean) –
When set to
true
, this parameter partitions S3 bucket folders based on transaction commit dates. The default value isfalse
. For more information about date-based folder partitioning, see Using date-based folder partitioning.DatePartitionSequence (string) –
Identifies the sequence of the date format to use during folder partitioning. The default value is
YYYYMMDD
. Use this parameter whenDatePartitionedEnabled
is set totrue
.DatePartitionDelimiter (string) –
Specifies a date separating delimiter to use during folder partitioning. The default value is
SLASH
. Use this parameter whenDatePartitionedEnabled
is set totrue
.UseCsvNoSupValue (boolean) –
This setting applies if the S3 output files during a change data capture (CDC) load are written in .csv format. If set to
true
for columns not included in the supplemental log, DMS uses the value specified by CsvNoSupValue. If not set or set tofalse
, DMS uses the null value for these columns.Note
This setting is supported in DMS versions 3.4.1 and later.
CsvNoSupValue (string) –
This setting only applies if your Amazon S3 output files during a change data capture (CDC) load are written in .csv format. If UseCsvNoSupValue is set to true, specify a string value that you want DMS to use for all columns not included in the supplemental log. If you do not specify a string value, DMS uses the null value for these columns regardless of the
UseCsvNoSupValue
setting.Note
This setting is supported in DMS versions 3.4.1 and later.
PreserveTransactions (boolean) –
If set to
true
, DMS saves the transaction order for a change data capture (CDC) load on the Amazon S3 target specified by CdcPath. For more information, see Capturing data changes (CDC) including transaction order on the S3 target.Note
This setting is supported in DMS versions 3.4.2 and later.
CdcPath (string) –
Specifies the folder path of CDC files. For an S3 source, this setting is required if a task captures change data; otherwise, it’s optional. If
CdcPath
is set, DMS reads CDC files from this path and replicates the data changes to the target endpoint. For an S3 target if you set PreserveTransactions totrue
, DMS verifies that you have set this parameter to a folder path on your S3 target where DMS can save the transaction order for the CDC load. DMS creates this CDC folder path in either your S3 target working directory or the S3 target location specified by BucketFolder and BucketName.For example, if you specify
CdcPath
asMyChangedData
, and you specifyBucketName
asMyTargetBucket
but do not specifyBucketFolder
, DMS creates the CDC folder path following:MyTargetBucket/MyChangedData
.If you specify the same
CdcPath
, and you specifyBucketName
asMyTargetBucket
andBucketFolder
asMyTargetData
, DMS creates the CDC folder path following:MyTargetBucket/MyTargetData/MyChangedData
.For more information on CDC including transaction order on an S3 target, see Capturing data changes (CDC) including transaction order on the S3 target.
Note
This setting is supported in DMS versions 3.4.2 and later.
UseTaskStartTimeForFullLoadTimestamp (boolean) –
When set to true, this parameter uses the task start time as the timestamp column value instead of the time data is written to target. For full load, when
useTaskStartTimeForFullLoadTimestamp
is set totrue
, each row of the timestamp column contains the task start time. For CDC loads, each row of the timestamp column contains the transaction commit time.When
useTaskStartTimeForFullLoadTimestamp
is set tofalse
, the full load timestamp in the timestamp column increments with the time data arrives at the target.CannedAclForObjects (string) –
A value that enables DMS to specify a predefined (canned) access control list for objects created in an Amazon S3 bucket as .csv or .parquet files. For more information about Amazon S3 canned ACLs, see Canned ACL in the Amazon S3 Developer Guide.
The default value is NONE. Valid values include NONE, PRIVATE, PUBLIC_READ, PUBLIC_READ_WRITE, AUTHENTICATED_READ, AWS_EXEC_READ, BUCKET_OWNER_READ, and BUCKET_OWNER_FULL_CONTROL.
AddColumnName (boolean) –
An optional parameter that, when set to
true
ory
, you can use to add column name information to the .csv output file.The default value is
false
. Valid values aretrue
,false
,y
, andn
.CdcMaxBatchInterval (integer) –
Maximum length of the interval, defined in seconds, after which to output a file to Amazon S3.
When
CdcMaxBatchInterval
andCdcMinFileSize
are both specified, the file write is triggered by whichever parameter condition is met first within an DMS CloudFormation template.The default value is 60 seconds.
CdcMinFileSize (integer) –
Minimum file size, defined in kilobytes, to reach for a file output to Amazon S3.
When
CdcMinFileSize
andCdcMaxBatchInterval
are both specified, the file write is triggered by whichever parameter condition is met first within an DMS CloudFormation template.The default value is 32 MB.
CsvNullValue (string) –
An optional parameter that specifies how DMS treats null values. While handling the null value, you can use this parameter to pass a user-defined string as null when writing to the target. For example, when target columns are not nullable, you can use this option to differentiate between the empty string value and the null value. So, if you set this parameter value to the empty string (”” or ‘’), DMS treats the empty string as the null value instead of
NULL
.The default value is
NULL
. Valid values include any valid string.IgnoreHeaderRows (integer) –
When this value is set to 1, DMS ignores the first row header in a .csv file. A value of 1 turns on the feature; a value of 0 turns off the feature.
The default is 0.
MaxFileSize (integer) –
A value that specifies the maximum size (in KB) of any .csv file to be created while migrating to an S3 target during full load.
The default value is 1,048,576 KB (1 GB). Valid values include 1 to 1,048,576.
Rfc4180 (boolean) –
For an S3 source, when this value is set to
true
ory
, each leading double quotation mark has to be followed by an ending double quotation mark. This formatting complies with RFC 4180. When this value is set tofalse
orn
, string literals are copied to the target as is. In this case, a delimiter (row or column) signals the end of the field. Thus, you can’t use a delimiter as part of the string, because it signals the end of the value.For an S3 target, an optional parameter used to set behavior to comply with RFC 4180 for data migrated to Amazon S3 using .csv file format only. When this value is set to
true
ory
using Amazon S3 as a target, if the data has quotation marks or newline characters in it, DMS encloses the entire column with an additional pair of double quotation marks (“). Every quotation mark within the data is repeated twice.The default value is
true
. Valid values includetrue
,false
,y
, andn
.DatePartitionTimezone (string) –
When creating an S3 target endpoint, set
DatePartitionTimezone
to convert the current UTC time into a specified time zone. The conversion occurs when a date partition folder is created and a CDC filename is generated. The time zone format is Area/Location. Use this parameter whenDatePartitionedEnabled
is set totrue
, as shown in the following example.s3-settings='{"DatePartitionEnabled": true, "DatePartitionSequence": "YYYYMMDDHH", "DatePartitionDelimiter": "SLASH", "DatePartitionTimezone":"Asia/Seoul", "BucketName": "dms-nattarat-test"}'
AddTrailingPaddingCharacter (boolean) –
Use the S3 target endpoint setting
AddTrailingPaddingCharacter
to add padding on string data. The default value isfalse
.ExpectedBucketOwner (string) –
To specify a bucket owner and prevent sniping, you can use the
ExpectedBucketOwner
endpoint setting.Example:
--s3-settings='{"ExpectedBucketOwner": "AWS_Account_ID"}'
When you make a request to test a connection or perform a migration, S3 checks the account ID of the bucket owner against the specified parameter.
GlueCatalogGeneration (boolean) –
When true, allows Glue to catalog your S3 bucket. Creating an Glue catalog lets you use Athena to query your data.
DmsTransferSettings (dict) –
The settings for the DMS Transfer type source. For more information, see the DmsTransferSettings structure.
ServiceAccessRoleArn (string) –
The Amazon Resource Name (ARN) used by the service access IAM role. The role must allow the
iam:PassRole
action.BucketName (string) –
The name of the S3 bucket to use.
MongoDbSettings (dict) –
The settings for the MongoDB source endpoint. For more information, see the
MongoDbSettings
structure.Username (string) –
The user name you use to access the MongoDB source endpoint.
Password (string) –
The password for the user account you use to access the MongoDB source endpoint.
ServerName (string) –
The name of the server on the MongoDB source endpoint.
Port (integer) –
The port value for the MongoDB source endpoint.
DatabaseName (string) –
The database name on the MongoDB source endpoint.
AuthType (string) –
The authentication type you use to access the MongoDB source endpoint.
When when set to
"no"
, user name and password parameters are not used and can be empty.AuthMechanism (string) –
The authentication mechanism you use to access the MongoDB source endpoint.
For the default value, in MongoDB version 2.x,
"default"
is"mongodb_cr"
. For MongoDB version 3.x or later,"default"
is"scram_sha_1"
. This setting isn’t used whenAuthType
is set to"no"
.NestingLevel (string) –
Specifies either document or table mode.
Default value is
"none"
. Specify"none"
to use document mode. Specify"one"
to use table mode.ExtractDocId (string) –
Specifies the document ID. Use this setting when
NestingLevel
is set to"none"
.Default value is
"false"
.DocsToInvestigate (string) –
Indicates the number of documents to preview to determine the document organization. Use this setting when
NestingLevel
is set to"one"
.Must be a positive value greater than
0
. Default value is1000
.AuthSource (string) –
The MongoDB database name. This setting isn’t used when
AuthType
is set to"no"
.The default is
"admin"
.KmsKeyId (string) –
The KMS key identifier that is used to encrypt the content on the replication instance. If you don’t specify a value for the
KmsKeyId
parameter, then DMS uses your default encryption key. KMS creates the default encryption key for your Amazon Web Services account. Your Amazon Web Services account has a different default encryption key for each Amazon Web Services Region.SecretsManagerAccessRoleArn (string) –
The full Amazon Resource Name (ARN) of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the value in
SecretsManagerSecret
. The role must allow theiam:PassRole
action.SecretsManagerSecret
has the value of the Amazon Web Services Secrets Manager secret that allows access to the MongoDB endpoint.Note
You can specify one of two sets of values for these permissions. You can specify the values for this setting and
SecretsManagerSecretId
. Or you can specify clear-text values forUserName
,Password
,ServerName
, andPort
. You can’t specify both. For more information on creating thisSecretsManagerSecret
and theSecretsManagerAccessRoleArn
andSecretsManagerSecretId
required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.SecretsManagerSecretId (string) –
The full ARN, partial ARN, or friendly name of the
SecretsManagerSecret
that contains the MongoDB endpoint connection details.UseUpdateLookUp (boolean) –
If
true
, DMS retrieves the entire document from the MongoDB source during migration. This may cause a migration failure if the server response exceeds bandwidth limits. To fetch only updates and deletes during migration, set this parameter tofalse
.ReplicateShardCollections (boolean) –
If
true
, DMS replicates data to shard collections. DMS only uses this setting if the target endpoint is a DocumentDB elastic cluster.When this setting is
true
, note the following:You must set
TargetTablePrepMode
tonothing
.DMS automatically sets
useUpdateLookup
tofalse
.
KinesisSettings (dict) –
The settings for the Amazon Kinesis target endpoint. For more information, see the
KinesisSettings
structure.StreamArn (string) –
The Amazon Resource Name (ARN) for the Amazon Kinesis Data Streams endpoint.
MessageFormat (string) –
The output format for the records created on the endpoint. The message format is
JSON
(default) orJSON_UNFORMATTED
(a single line with no tab).ServiceAccessRoleArn (string) –
The Amazon Resource Name (ARN) for the IAM role that DMS uses to write to the Kinesis data stream. The role must allow the
iam:PassRole
action.IncludeTransactionDetails (boolean) –
Provides detailed transaction information from the source database. This information includes a commit timestamp, a log position, and values for
transaction_id
, previoustransaction_id
, andtransaction_record_id
(the record offset within a transaction). The default isfalse
.IncludePartitionValue (boolean) –
Shows the partition value within the Kinesis message output, unless the partition type is
schema-table-type
. The default isfalse
.PartitionIncludeSchemaTable (boolean) –
Prefixes schema and table names to partition values, when the partition type is
primary-key-type
. Doing this increases data distribution among Kinesis shards. For example, suppose that a SysBench schema has thousands of tables and each table has only limited range for a primary key. In this case, the same primary key is sent from thousands of tables to the same shard, which causes throttling. The default isfalse
.IncludeTableAlterOperations (boolean) –
Includes any data definition language (DDL) operations that change the table in the control data, such as
rename-table
,drop-table
,add-column
,drop-column
, andrename-column
. The default isfalse
.IncludeControlDetails (boolean) –
Shows detailed control information for table definition, column definition, and table and column changes in the Kinesis message output. The default is
false
.IncludeNullAndEmpty (boolean) –
Include NULL and empty columns for records migrated to the endpoint. The default is
false
.NoHexPrefix (boolean) –
Set this optional parameter to
true
to avoid adding a ‘0x’ prefix to raw data in hexadecimal format. For example, by default, DMS adds a ‘0x’ prefix to the LOB column type in hexadecimal format moving from an Oracle source to an Amazon Kinesis target. Use theNoHexPrefix
endpoint setting to enable migration of RAW data type columns without adding the ‘0x’ prefix.
KafkaSettings (dict) –
The settings for the Apache Kafka target endpoint. For more information, see the
KafkaSettings
structure.Broker (string) –
A comma-separated list of one or more broker locations in your Kafka cluster that host your Kafka instance. Specify each broker location in the form
broker-hostname-or-ip:port ``. For example, ``"ec2-12-345-678-901.compute-1.amazonaws.com:2345"
. For more information and examples of specifying a list of broker locations, see Using Apache Kafka as a target for Database Migration Service in the Database Migration Service User Guide.Topic (string) –
The topic to which you migrate the data. If you don’t specify a topic, DMS specifies
"kafka-default-topic"
as the migration topic.MessageFormat (string) –
The output format for the records created on the endpoint. The message format is
JSON
(default) orJSON_UNFORMATTED
(a single line with no tab).IncludeTransactionDetails (boolean) –
Provides detailed transaction information from the source database. This information includes a commit timestamp, a log position, and values for
transaction_id
, previoustransaction_id
, andtransaction_record_id
(the record offset within a transaction). The default isfalse
.IncludePartitionValue (boolean) –
Shows the partition value within the Kafka message output unless the partition type is
schema-table-type
. The default isfalse
.PartitionIncludeSchemaTable (boolean) –
Prefixes schema and table names to partition values, when the partition type is
primary-key-type
. Doing this increases data distribution among Kafka partitions. For example, suppose that a SysBench schema has thousands of tables and each table has only limited range for a primary key. In this case, the same primary key is sent from thousands of tables to the same partition, which causes throttling. The default isfalse
.IncludeTableAlterOperations (boolean) –
Includes any data definition language (DDL) operations that change the table in the control data, such as
rename-table
,drop-table
,add-column
,drop-column
, andrename-column
. The default isfalse
.IncludeControlDetails (boolean) –
Shows detailed control information for table definition, column definition, and table and column changes in the Kafka message output. The default is
false
.MessageMaxBytes (integer) –
The maximum size in bytes for records created on the endpoint The default is 1,000,000.
IncludeNullAndEmpty (boolean) –
Include NULL and empty columns for records migrated to the endpoint. The default is
false
.SecurityProtocol (string) –
Set secure connection to a Kafka target endpoint using Transport Layer Security (TLS). Options include
ssl-encryption
,ssl-authentication
, andsasl-ssl
.sasl-ssl
requiresSaslUsername
andSaslPassword
.SslClientCertificateArn (string) –
The Amazon Resource Name (ARN) of the client certificate used to securely connect to a Kafka target endpoint.
SslClientKeyArn (string) –
The Amazon Resource Name (ARN) for the client private key used to securely connect to a Kafka target endpoint.
SslClientKeyPassword (string) –
The password for the client private key used to securely connect to a Kafka target endpoint.
SslCaCertificateArn (string) –
The Amazon Resource Name (ARN) for the private certificate authority (CA) cert that DMS uses to securely connect to your Kafka target endpoint.
SaslUsername (string) –
The secure user name you created when you first set up your MSK cluster to validate a client identity and make an encrypted connection between server and client using SASL-SSL authentication.
SaslPassword (string) –
The secure password you created when you first set up your MSK cluster to validate a client identity and make an encrypted connection between server and client using SASL-SSL authentication.
NoHexPrefix (boolean) –
Set this optional parameter to
true
to avoid adding a ‘0x’ prefix to raw data in hexadecimal format. For example, by default, DMS adds a ‘0x’ prefix to the LOB column type in hexadecimal format moving from an Oracle source to a Kafka target. Use theNoHexPrefix
endpoint setting to enable migration of RAW data type columns without adding the ‘0x’ prefix.SaslMechanism (string) –
For SASL/SSL authentication, DMS supports the
SCRAM-SHA-512
mechanism by default. DMS versions 3.5.0 and later also support thePLAIN
mechanism. To use thePLAIN
mechanism, set this parameter toPLAIN.
SslEndpointIdentificationAlgorithm (string) –
Sets hostname verification for the certificate. This setting is supported in DMS version 3.5.1 and later.
ElasticsearchSettings (dict) –
The settings for the OpenSearch source endpoint. For more information, see the
ElasticsearchSettings
structure.ServiceAccessRoleArn (string) –
The Amazon Resource Name (ARN) used by the service to access the IAM role. The role must allow the
iam:PassRole
action.EndpointUri (string) –
The endpoint for the OpenSearch cluster. DMS uses HTTPS if a transport protocol (http/https) is not specified.
FullLoadErrorPercentage (integer) –
The maximum percentage of records that can fail to be written before a full load operation stops.
To avoid early failure, this counter is only effective after 1000 records are transferred. OpenSearch also has the concept of error monitoring during the last 10 minutes of an Observation Window. If transfer of all records fail in the last 10 minutes, the full load operation stops.
ErrorRetryDuration (integer) –
The maximum number of seconds for which DMS retries failed API requests to the OpenSearch cluster.
UseNewMappingType (boolean) –
Set this option to
true
for DMS to migrate documentation using the documentation type_doc
. OpenSearch and an Elasticsearch cluster only support the _doc documentation type in versions 7. x and later. The default value isfalse
.
NeptuneSettings (dict) –
The settings for the Amazon Neptune target endpoint. For more information, see the
NeptuneSettings
structure.ServiceAccessRoleArn (string) –
The Amazon Resource Name (ARN) of the service role that you created for the Neptune target endpoint. The role must allow the
iam:PassRole
action. For more information, see Creating an IAM Service Role for Accessing Amazon Neptune as a Target in the Database Migration Service User Guide.S3BucketName (string) –
The name of the Amazon S3 bucket where DMS can temporarily store migrated graph data in .csv files before bulk-loading it to the Neptune target database. DMS maps the SQL source data to graph data before storing it in these .csv files.
S3BucketFolder (string) –
A folder path where you want DMS to store migrated graph data in the S3 bucket specified by
S3BucketName
ErrorRetryDuration (integer) –
The number of milliseconds for DMS to wait to retry a bulk-load of migrated graph data to the Neptune target database before raising an error. The default is 250.
MaxFileSize (integer) –
The maximum size in kilobytes of migrated graph data stored in a .csv file before DMS bulk-loads the data to the Neptune target database. The default is 1,048,576 KB. If the bulk load is successful, DMS clears the bucket, ready to store the next batch of migrated graph data.
MaxRetryCount (integer) –
The number of times for DMS to retry a bulk load of migrated graph data to the Neptune target database before raising an error. The default is 5.
IamAuthEnabled (boolean) –
If you want Identity and Access Management (IAM) authorization enabled for this endpoint, set this parameter to
true
. Then attach the appropriate IAM policy document to your service role specified byServiceAccessRoleArn
. The default isfalse
.
RedshiftSettings (dict) –
Settings for the Amazon Redshift endpoint.
AcceptAnyDate (boolean) –
A value that indicates to allow any date format, including invalid formats such as 00/00/00 00:00:00, to be loaded without generating an error. You can choose
true
orfalse
(the default).This parameter applies only to TIMESTAMP and DATE columns. Always use ACCEPTANYDATE with the DATEFORMAT parameter. If the date format for the data doesn’t match the DATEFORMAT specification, Amazon Redshift inserts a NULL value into that field.
AfterConnectScript (string) –
Code to run after connecting. This parameter should contain the code itself, not the name of a file containing the code.
BucketFolder (string) –
An S3 folder where the comma-separated-value (.csv) files are stored before being uploaded to the target Redshift cluster.
For full load mode, DMS converts source records into .csv files and loads them to the BucketFolder/TableID path. DMS uses the Redshift
COPY
command to upload the .csv files to the target table. The files are deleted once theCOPY
operation has finished. For more information, see COPY in the Amazon Redshift Database Developer Guide.For change-data-capture (CDC) mode, DMS creates a NetChanges table, and loads the .csv files to this BucketFolder/NetChangesTableID path.
BucketName (string) –
The name of the intermediate S3 bucket used to store .csv files before uploading data to Redshift.
CaseSensitiveNames (boolean) –
If Amazon Redshift is configured to support case sensitive schema names, set
CaseSensitiveNames
totrue
. The default isfalse
.CompUpdate (boolean) –
If you set
CompUpdate
totrue
Amazon Redshift applies automatic compression if the table is empty. This applies even if the table columns already have encodings other thanRAW
. If you setCompUpdate
tofalse
, automatic compression is disabled and existing column encodings aren’t changed. The default istrue
.ConnectionTimeout (integer) –
A value that sets the amount of time to wait (in milliseconds) before timing out, beginning from when you initially establish a connection.
DatabaseName (string) –
The name of the Amazon Redshift data warehouse (service) that you are working with.
DateFormat (string) –
The date format that you are using. Valid values are
auto
(case-sensitive), your date format string enclosed in quotes, or NULL. If this parameter is left unset (NULL), it defaults to a format of ‘YYYY-MM-DD’. Usingauto
recognizes most strings, even some that aren’t supported when you use a date format string.If your date and time values use formats different from each other, set this to
auto
.EmptyAsNull (boolean) –
A value that specifies whether DMS should migrate empty CHAR and VARCHAR fields as NULL. A value of
true
sets empty CHAR and VARCHAR fields to null. The default isfalse
.EncryptionMode (string) –
The type of server-side encryption that you want to use for your data. This encryption type is part of the endpoint settings or the extra connections attributes for Amazon S3. You can choose either
SSE_S3
(the default) orSSE_KMS
.Note
For the
ModifyEndpoint
operation, you can change the existing value of theEncryptionMode
parameter fromSSE_KMS
toSSE_S3
. But you can’t change the existing value fromSSE_S3
toSSE_KMS
.To use
SSE_S3
, create an Identity and Access Management (IAM) role with a policy that allows"arn:aws:s3:::*"
to use the following actions:"s3:PutObject", "s3:ListBucket"
ExplicitIds (boolean) –
This setting is only valid for a full-load migration task. Set
ExplicitIds
totrue
to have tables withIDENTITY
columns override their auto-generated values with explicit values loaded from the source data files used to populate the tables. The default isfalse
.FileTransferUploadStreams (integer) –
The number of threads used to upload a single file. This parameter accepts a value from 1 through 64. It defaults to 10.
The number of parallel streams used to upload a single .csv file to an S3 bucket using S3 Multipart Upload. For more information, see Multipart upload overview.
FileTransferUploadStreams
accepts a value from 1 through 64. It defaults to 10.LoadTimeout (integer) –
The amount of time to wait (in milliseconds) before timing out of operations performed by DMS on a Redshift cluster, such as Redshift COPY, INSERT, DELETE, and UPDATE.
MaxFileSize (integer) –
The maximum size (in KB) of any .csv file used to load data on an S3 bucket and transfer data to Amazon Redshift. It defaults to 1048576KB (1 GB).
Password (string) –
The password for the user named in the
username
property.Port (integer) –
The port number for Amazon Redshift. The default value is 5439.
RemoveQuotes (boolean) –
A value that specifies to remove surrounding quotation marks from strings in the incoming data. All characters within the quotation marks, including delimiters, are retained. Choose
true
to remove quotation marks. The default isfalse
.ReplaceInvalidChars (string) –
A list of characters that you want to replace. Use with
ReplaceChars
.ReplaceChars (string) –
A value that specifies to replaces the invalid characters specified in
ReplaceInvalidChars
, substituting the specified characters instead. The default is"?"
.ServerName (string) –
The name of the Amazon Redshift cluster you are using.
ServiceAccessRoleArn (string) –
The Amazon Resource Name (ARN) of the IAM role that has access to the Amazon Redshift service. The role must allow the
iam:PassRole
action.ServerSideEncryptionKmsKeyId (string) –
The KMS key ID. If you are using
SSE_KMS
for theEncryptionMode
, provide this key ID. The key that you use needs an attached policy that enables IAM user permissions and allows use of the key.TimeFormat (string) –
The time format that you want to use. Valid values are
auto
(case-sensitive),'timeformat_string'
,'epochsecs'
, or'epochmillisecs'
. It defaults to 10. Usingauto
recognizes most strings, even some that aren’t supported when you use a time format string.If your date and time values use formats different from each other, set this parameter to
auto
.TrimBlanks (boolean) –
A value that specifies to remove the trailing white space characters from a VARCHAR string. This parameter applies only to columns with a VARCHAR data type. Choose
true
to remove unneeded white space. The default isfalse
.TruncateColumns (boolean) –
A value that specifies to truncate data in columns to the appropriate number of characters, so that the data fits in the column. This parameter applies only to columns with a VARCHAR or CHAR data type, and rows with a size of 4 MB or less. Choose
true
to truncate data. The default isfalse
.Username (string) –
An Amazon Redshift user name for a registered user.
WriteBufferSize (integer) –
The size (in KB) of the in-memory file write buffer used when generating .csv files on the local disk at the DMS replication instance. The default value is 1000 (buffer size is 1000KB).
SecretsManagerAccessRoleArn (string) –
The full Amazon Resource Name (ARN) of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the value in
SecretsManagerSecret
. The role must allow theiam:PassRole
action.SecretsManagerSecret
has the value of the Amazon Web Services Secrets Manager secret that allows access to the Amazon Redshift endpoint.Note
You can specify one of two sets of values for these permissions. You can specify the values for this setting and
SecretsManagerSecretId
. Or you can specify clear-text values forUserName
,Password
,ServerName
, andPort
. You can’t specify both. For more information on creating thisSecretsManagerSecret
and theSecretsManagerAccessRoleArn
andSecretsManagerSecretId
required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.SecretsManagerSecretId (string) –
The full ARN, partial ARN, or friendly name of the
SecretsManagerSecret
that contains the Amazon Redshift endpoint connection details.MapBooleanAsBoolean (boolean) –
When true, lets Redshift migrate the boolean type as boolean. By default, Redshift migrates booleans as
varchar(1)
.
PostgreSQLSettings (dict) –
The settings for the PostgreSQL source and target endpoint. For more information, see the
PostgreSQLSettings
structure.AfterConnectScript (string) –
For use with change data capture (CDC) only, this attribute has DMS bypass foreign keys and user triggers to reduce the time it takes to bulk load data.
Example:
afterConnectScript=SET session_replication_role='replica'
CaptureDdls (boolean) –
To capture DDL events, DMS creates various artifacts in the PostgreSQL database when the task starts. You can later remove these artifacts.
If this value is set to
N
, you don’t have to create tables or triggers on the source database.MaxFileSize (integer) –
Specifies the maximum size (in KB) of any .csv file used to transfer data to PostgreSQL.
Example:
maxFileSize=512
DatabaseName (string) –
Database name for the endpoint.
DdlArtifactsSchema (string) –
The schema in which the operational DDL database artifacts are created.
Example:
ddlArtifactsSchema=xyzddlschema;
ExecuteTimeout (integer) –
Sets the client statement timeout for the PostgreSQL instance, in seconds. The default value is 60 seconds.
Example:
executeTimeout=100;
FailTasksOnLobTruncation (boolean) –
When set to
true
, this value causes a task to fail if the actual size of a LOB column is greater than the specifiedLobMaxSize
.If task is set to Limited LOB mode and this option is set to true, the task fails instead of truncating the LOB data.
HeartbeatEnable (boolean) –
The write-ahead log (WAL) heartbeat feature mimics a dummy transaction. By doing this, it prevents idle logical replication slots from holding onto old WAL logs, which can result in storage full situations on the source. This heartbeat keeps
restart_lsn
moving and prevents storage full scenarios.HeartbeatSchema (string) –
Sets the schema in which the heartbeat artifacts are created.
HeartbeatFrequency (integer) –
Sets the WAL heartbeat frequency (in minutes).
Password (string) –
Endpoint connection password.
Port (integer) –
Endpoint TCP port. The default is 5432.
ServerName (string) –
The host name of the endpoint database.
For an Amazon RDS PostgreSQL instance, this is the output of DescribeDBInstances, in the
Endpoint.Address
field.For an Aurora PostgreSQL instance, this is the output of DescribeDBClusters, in the
Endpoint
field.Username (string) –
Endpoint connection user name.
SlotName (string) –
Sets the name of a previously created logical replication slot for a change data capture (CDC) load of the PostgreSQL source instance.
When used with the
CdcStartPosition
request parameter for the DMS API , this attribute also makes it possible to use native CDC start points. DMS verifies that the specified logical replication slot exists before starting the CDC load task. It also verifies that the task was created with a valid setting ofCdcStartPosition
. If the specified slot doesn’t exist or the task doesn’t have a validCdcStartPosition
setting, DMS raises an error.For more information about setting the
CdcStartPosition
request parameter, see Determining a CDC native start point in the Database Migration Service User Guide. For more information about usingCdcStartPosition
, see CreateReplicationTask, StartReplicationTask, and ModifyReplicationTask.PluginName (string) –
Specifies the plugin to use to create a replication slot.
SecretsManagerAccessRoleArn (string) –
The full Amazon Resource Name (ARN) of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the value in
SecretsManagerSecret
. The role must allow theiam:PassRole
action.SecretsManagerSecret
has the value of the Amazon Web Services Secrets Manager secret that allows access to the PostgreSQL endpoint.Note
You can specify one of two sets of values for these permissions. You can specify the values for this setting and
SecretsManagerSecretId
. Or you can specify clear-text values forUserName
,Password
,ServerName
, andPort
. You can’t specify both. For more information on creating thisSecretsManagerSecret
and theSecretsManagerAccessRoleArn
andSecretsManagerSecretId
required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.SecretsManagerSecretId (string) –
The full ARN, partial ARN, or friendly name of the
SecretsManagerSecret
that contains the PostgreSQL endpoint connection details.TrimSpaceInChar (boolean) –
Use the
TrimSpaceInChar
source endpoint setting to trim data on CHAR and NCHAR data types during migration. The default value istrue
.MapBooleanAsBoolean (boolean) –
When true, lets PostgreSQL migrate the boolean type as boolean. By default, PostgreSQL migrates booleans as
varchar(5)
.MapJsonbAsClob (boolean) –
When true, DMS migrates JSONB values as CLOB.
MapLongVarcharAs (string) –
When true, DMS migrates LONG values as VARCHAR.
DatabaseMode (string) –
Specifies the default behavior of the replication’s handling of PostgreSQL- compatible endpoints that require some additional configuration, such as Babelfish endpoints.
BabelfishDatabaseName (string) –
The Babelfish for Aurora PostgreSQL database name for the endpoint.
MySQLSettings (dict) –
The settings for the MySQL source and target endpoint. For more information, see the
MySQLSettings
structure.AfterConnectScript (string) –
Specifies a script to run immediately after DMS connects to the endpoint. The migration task continues running regardless if the SQL statement succeeds or fails.
For this parameter, provide the code of the script itself, not the name of a file containing the script.
CleanSourceMetadataOnMismatch (boolean) –
Cleans and recreates table metadata information on the replication instance when a mismatch occurs. For example, in a situation where running an alter DDL on the table could result in different information about the table cached in the replication instance.
DatabaseName (string) –
Database name for the endpoint. For a MySQL source or target endpoint, don’t explicitly specify the database using the
DatabaseName
request parameter on either theCreateEndpoint
orModifyEndpoint
API call. SpecifyingDatabaseName
when you create or modify a MySQL endpoint replicates all the task tables to this single database. For MySQL endpoints, you specify the database only when you specify the schema in the table-mapping rules of the DMS task.EventsPollInterval (integer) –
Specifies how often to check the binary log for new changes/events when the database is idle. The default is five seconds.
Example:
eventsPollInterval=5;
In the example, DMS checks for changes in the binary logs every five seconds.
TargetDbType (string) –
Specifies where to migrate source tables on the target, either to a single database or multiple databases. If you specify
SPECIFIC_DATABASE
, specify the database name using theDatabaseName
parameter of theEndpoint
object.Example:
targetDbType=MULTIPLE_DATABASES
MaxFileSize (integer) –
Specifies the maximum size (in KB) of any .csv file used to transfer data to a MySQL-compatible database.
Example:
maxFileSize=512
ParallelLoadThreads (integer) –
Improves performance when loading data into the MySQL-compatible target database. Specifies how many threads to use to load the data into the MySQL-compatible target database. Setting a large number of threads can have an adverse effect on database performance, because a separate connection is required for each thread. The default is one.
Example:
parallelLoadThreads=1
Password (string) –
Endpoint connection password.
Port (integer) –
Endpoint TCP port.
ServerName (string) –
The host name of the endpoint database.
For an Amazon RDS MySQL instance, this is the output of DescribeDBInstances, in the
Endpoint.Address
field.For an Aurora MySQL instance, this is the output of DescribeDBClusters, in the
Endpoint
field.ServerTimezone (string) –
Specifies the time zone for the source MySQL database.
Example:
serverTimezone=US/Pacific;
Note: Do not enclose time zones in single quotes.
Username (string) –
Endpoint connection user name.
SecretsManagerAccessRoleArn (string) –
The full Amazon Resource Name (ARN) of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the value in
SecretsManagerSecret
. The role must allow theiam:PassRole
action.SecretsManagerSecret
has the value of the Amazon Web Services Secrets Manager secret that allows access to the MySQL endpoint.Note
You can specify one of two sets of values for these permissions. You can specify the values for this setting and
SecretsManagerSecretId
. Or you can specify clear-text values forUserName
,Password
,ServerName
, andPort
. You can’t specify both. For more information on creating thisSecretsManagerSecret
and theSecretsManagerAccessRoleArn
andSecretsManagerSecretId
required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.SecretsManagerSecretId (string) –
The full ARN, partial ARN, or friendly name of the
SecretsManagerSecret
that contains the MySQL endpoint connection details.
OracleSettings (dict) –
The settings for the Oracle source and target endpoint. For more information, see the
OracleSettings
structure.AddSupplementalLogging (boolean) –
Set this attribute to set up table-level supplemental logging for the Oracle database. This attribute enables PRIMARY KEY supplemental logging on all tables selected for a migration task.
If you use this option, you still need to enable database-level supplemental logging.
ArchivedLogDestId (integer) –
Specifies the ID of the destination for the archived redo logs. This value should be the same as a number in the dest_id column of the v$archived_log view. If you work with an additional redo log destination, use the
AdditionalArchivedLogDestId
option to specify the additional destination ID. Doing this improves performance by ensuring that the correct logs are accessed from the outset.AdditionalArchivedLogDestId (integer) –
Set this attribute with
ArchivedLogDestId
in a primary/ standby setup. This attribute is useful in the case of a switchover. In this case, DMS needs to know which destination to get archive redo logs from to read changes. This need arises because the previous primary instance is now a standby instance after switchover.Although DMS supports the use of the Oracle
RESETLOGS
option to open the database, never useRESETLOGS
unless necessary. For additional information aboutRESETLOGS
, see RMAN Data Repair Concepts in the Oracle Database Backup and Recovery User’s Guide.ExtraArchivedLogDestIds (list) –
Specifies the IDs of one more destinations for one or more archived redo logs. These IDs are the values of the
dest_id
column in thev$archived_log
view. Use this setting with thearchivedLogDestId
extra connection attribute in a primary-to-single setup or a primary-to-multiple-standby setup.This setting is useful in a switchover when you use an Oracle Data Guard database as a source. In this case, DMS needs information about what destination to get archive redo logs from to read changes. DMS needs this because after the switchover the previous primary is a standby instance. For example, in a primary-to-single standby setup you might apply the following settings.
archivedLogDestId=1; ExtraArchivedLogDestIds=[2]
In a primary-to-multiple-standby setup, you might apply the following settings.
archivedLogDestId=1; ExtraArchivedLogDestIds=[2,3,4]
Although DMS supports the use of the Oracle
RESETLOGS
option to open the database, never useRESETLOGS
unless it’s necessary. For more information aboutRESETLOGS
, see RMAN Data Repair Concepts in the Oracle Database Backup and Recovery User’s Guide.(integer) –
AllowSelectNestedTables (boolean) –
Set this attribute to
true
to enable replication of Oracle tables containing columns that are nested tables or defined types.ParallelAsmReadThreads (integer) –
Set this attribute to change the number of threads that DMS configures to perform a change data capture (CDC) load using Oracle Automatic Storage Management (ASM). You can specify an integer value between 2 (the default) and 8 (the maximum). Use this attribute together with the
readAheadBlocks
attribute.ReadAheadBlocks (integer) –
Set this attribute to change the number of read-ahead blocks that DMS configures to perform a change data capture (CDC) load using Oracle Automatic Storage Management (ASM). You can specify an integer value between 1000 (the default) and 200,000 (the maximum).
AccessAlternateDirectly (boolean) –
Set this attribute to
false
in order to use the Binary Reader to capture change data for an Amazon RDS for Oracle as the source. This tells the DMS instance to not access redo logs through any specified path prefix replacement using direct file access.UseAlternateFolderForOnline (boolean) –
Set this attribute to
true
in order to use the Binary Reader to capture change data for an Amazon RDS for Oracle as the source. This tells the DMS instance to use any specified prefix replacement to access all online redo logs.OraclePathPrefix (string) –
Set this string attribute to the required value in order to use the Binary Reader to capture change data for an Amazon RDS for Oracle as the source. This value specifies the default Oracle root used to access the redo logs.
UsePathPrefix (string) –
Set this string attribute to the required value in order to use the Binary Reader to capture change data for an Amazon RDS for Oracle as the source. This value specifies the path prefix used to replace the default Oracle root to access the redo logs.
ReplacePathPrefix (boolean) –
Set this attribute to true in order to use the Binary Reader to capture change data for an Amazon RDS for Oracle as the source. This setting tells DMS instance to replace the default Oracle root with the specified
usePathPrefix
setting to access the redo logs.EnableHomogenousTablespace (boolean) –
Set this attribute to enable homogenous tablespace replication and create existing tables or indexes under the same tablespace on the target.
DirectPathNoLog (boolean) –
When set to
true
, this attribute helps to increase the commit rate on the Oracle target database by writing directly to tables and not writing a trail to database logs.ArchivedLogsOnly (boolean) –
When this field is set to
Y
, DMS only accesses the archived redo logs. If the archived redo logs are stored on Automatic Storage Management (ASM) only, the DMS user account needs to be granted ASM privileges.AsmPassword (string) –
For an Oracle source endpoint, your Oracle Automatic Storage Management (ASM) password. You can set this value from the
asm_user_password
value. You set this value as part of the comma-separated value that you set to thePassword
request parameter when you create the endpoint to access transaction logs using Binary Reader. For more information, see Configuration for change data capture (CDC) on an Oracle source database.AsmServer (string) –
For an Oracle source endpoint, your ASM server address. You can set this value from the
asm_server
value. You setasm_server
as part of the extra connection attribute string to access an Oracle server with Binary Reader that uses ASM. For more information, see Configuration for change data capture (CDC) on an Oracle source database.AsmUser (string) –
For an Oracle source endpoint, your ASM user name. You can set this value from the
asm_user
value. You setasm_user
as part of the extra connection attribute string to access an Oracle server with Binary Reader that uses ASM. For more information, see Configuration for change data capture (CDC) on an Oracle source database.CharLengthSemantics (string) –
Specifies whether the length of a character column is in bytes or in characters. To indicate that the character column length is in characters, set this attribute to
CHAR
. Otherwise, the character column length is in bytes.Example:
charLengthSemantics=CHAR;
DatabaseName (string) –
Database name for the endpoint.
DirectPathParallelLoad (boolean) –
When set to
true
, this attribute specifies a parallel load whenuseDirectPathFullLoad
is set toY
. This attribute also only applies when you use the DMS parallel load feature. Note that the target table cannot have any constraints or indexes.FailTasksOnLobTruncation (boolean) –
When set to
true
, this attribute causes a task to fail if the actual size of an LOB column is greater than the specifiedLobMaxSize
.If a task is set to limited LOB mode and this option is set to
true
, the task fails instead of truncating the LOB data.NumberDatatypeScale (integer) –
Specifies the number scale. You can select a scale up to 38, or you can select FLOAT. By default, the NUMBER data type is converted to precision 38, scale 10.
Example:
numberDataTypeScale=12
Password (string) –
Endpoint connection password.
Port (integer) –
Endpoint TCP port.
ReadTableSpaceName (boolean) –
When set to
true
, this attribute supports tablespace replication.RetryInterval (integer) –
Specifies the number of seconds that the system waits before resending a query.
Example:
retryInterval=6;
SecurityDbEncryption (string) –
For an Oracle source endpoint, the transparent data encryption (TDE) password required by AWM DMS to access Oracle redo logs encrypted by TDE using Binary Reader. It is also the
TDE_Password
part of the comma-separated value you set to thePassword
request parameter when you create the endpoint. TheSecurityDbEncryptian
setting is related to thisSecurityDbEncryptionName
setting. For more information, see Supported encryption methods for using Oracle as a source for DMS in the Database Migration Service User Guide.SecurityDbEncryptionName (string) –
For an Oracle source endpoint, the name of a key used for the transparent data encryption (TDE) of the columns and tablespaces in an Oracle source database that is encrypted using TDE. The key value is the value of the
SecurityDbEncryption
setting. For more information on setting the key name value ofSecurityDbEncryptionName
, see the information and example for setting thesecurityDbEncryptionName
extra connection attribute in Supported encryption methods for using Oracle as a source for DMS in the Database Migration Service User Guide.ServerName (string) –
Fully qualified domain name of the endpoint.
For an Amazon RDS Oracle instance, this is the output of DescribeDBInstances, in the
Endpoint.Address
field.SpatialDataOptionToGeoJsonFunctionName (string) –
Use this attribute to convert
SDO_GEOMETRY
toGEOJSON
format. By default, DMS calls theSDO2GEOJSON
custom function if present and accessible. Or you can create your own custom function that mimics the operation ofSDOGEOJSON
and setSpatialDataOptionToGeoJsonFunctionName
to call it instead.StandbyDelayTime (integer) –
Use this attribute to specify a time in minutes for the delay in standby sync. If the source is an Oracle Active Data Guard standby database, use this attribute to specify the time lag between primary and standby databases.
In DMS, you can create an Oracle CDC task that uses an Active Data Guard standby instance as a source for replicating ongoing changes. Doing this eliminates the need to connect to an active database that might be in production.
Username (string) –
Endpoint connection user name.
UseBFile (boolean) –
Set this attribute to Y to capture change data using the Binary Reader utility. Set
UseLogminerReader
to N to set this attribute to Y. To use Binary Reader with Amazon RDS for Oracle as the source, you set additional attributes. For more information about using this setting with Oracle Automatic Storage Management (ASM), see Using Oracle LogMiner or DMS Binary Reader for CDC.UseDirectPathFullLoad (boolean) –
Set this attribute to Y to have DMS use a direct path full load. Specify this value to use the direct path protocol in the Oracle Call Interface (OCI). By using this OCI protocol, you can bulk-load Oracle target tables during a full load.
UseLogminerReader (boolean) –
Set this attribute to Y to capture change data using the Oracle LogMiner utility (the default). Set this attribute to N if you want to access the redo logs as a binary file. When you set
UseLogminerReader
to N, also setUseBfile
to Y. For more information on this setting and using Oracle ASM, see Using Oracle LogMiner or DMS Binary Reader for CDC in the DMS User Guide.SecretsManagerAccessRoleArn (string) –
The full Amazon Resource Name (ARN) of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the value in
SecretsManagerSecret
. The role must allow theiam:PassRole
action.SecretsManagerSecret
has the value of the Amazon Web Services Secrets Manager secret that allows access to the Oracle endpoint.Note
You can specify one of two sets of values for these permissions. You can specify the values for this setting and
SecretsManagerSecretId
. Or you can specify clear-text values forUserName
,Password
,ServerName
, andPort
. You can’t specify both. For more information on creating thisSecretsManagerSecret
and theSecretsManagerAccessRoleArn
andSecretsManagerSecretId
required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.SecretsManagerSecretId (string) –
The full ARN, partial ARN, or friendly name of the
SecretsManagerSecret
that contains the Oracle endpoint connection details.SecretsManagerOracleAsmAccessRoleArn (string) –
Required only if your Oracle endpoint uses Automatic Storage Management (ASM). The full ARN of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the
SecretsManagerOracleAsmSecret
. ThisSecretsManagerOracleAsmSecret
has the secret value that allows access to the Oracle ASM of the endpoint.Note
You can specify one of two sets of values for these permissions. You can specify the values for this setting and
SecretsManagerOracleAsmSecretId
. Or you can specify clear-text values forAsmUserName
,AsmPassword
, andAsmServerName
. You can’t specify both. For more information on creating thisSecretsManagerOracleAsmSecret
and theSecretsManagerOracleAsmAccessRoleArn
andSecretsManagerOracleAsmSecretId
required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.SecretsManagerOracleAsmSecretId (string) –
Required only if your Oracle endpoint uses Automatic Storage Management (ASM). The full ARN, partial ARN, or friendly name of the
SecretsManagerOracleAsmSecret
that contains the Oracle ASM connection details for the Oracle endpoint.TrimSpaceInChar (boolean) –
Use the
TrimSpaceInChar
source endpoint setting to trim data on CHAR and NCHAR data types during migration. The default value istrue
.ConvertTimestampWithZoneToUTC (boolean) –
When true, converts timestamps with the
timezone
datatype to their UTC value.OpenTransactionWindow (integer) –
The timeframe in minutes to check for open transactions for a CDC-only task.
You can specify an integer value between 0 (the default) and 240 (the maximum).
Note
This parameter is only valid in DMS version 3.5.0 and later. DMS supports a window of up to 9.5 hours including the value for
OpenTransactionWindow
.
SybaseSettings (dict) –
The settings for the SAP ASE source and target endpoint. For more information, see the
SybaseSettings
structure.DatabaseName (string) –
Database name for the endpoint.
Password (string) –
Endpoint connection password.
Port (integer) –
Endpoint TCP port. The default is 5000.
ServerName (string) –
Fully qualified domain name of the endpoint.
Username (string) –
Endpoint connection user name.
SecretsManagerAccessRoleArn (string) –
The full Amazon Resource Name (ARN) of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the value in
SecretsManagerSecret
. The role must allow theiam:PassRole
action.SecretsManagerSecret
has the value of the Amazon Web Services Secrets Manager secret that allows access to the SAP ASE endpoint.Note
You can specify one of two sets of values for these permissions. You can specify the values for this setting and
SecretsManagerSecretId
. Or you can specify clear-text values forUserName
,Password
,ServerName
, andPort
. You can’t specify both. For more information on creating thisSecretsManagerSecret
and theSecretsManagerAccessRoleArn
andSecretsManagerSecretId
required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.SecretsManagerSecretId (string) –
The full ARN, partial ARN, or friendly name of the
SecretsManagerSecret
that contains the SAP SAE endpoint connection details.
MicrosoftSQLServerSettings (dict) –
The settings for the Microsoft SQL Server source and target endpoint. For more information, see the
MicrosoftSQLServerSettings
structure.Port (integer) –
Endpoint TCP port.
BcpPacketSize (integer) –
The maximum size of the packets (in bytes) used to transfer data using BCP.
DatabaseName (string) –
Database name for the endpoint.
ControlTablesFileGroup (string) –
Specifies a file group for the DMS internal tables. When the replication task starts, all the internal DMS control tables (awsdms_ apply_exception, awsdms_apply, awsdms_changes) are created for the specified file group.
Password (string) –
Endpoint connection password.
QuerySingleAlwaysOnNode (boolean) –
Cleans and recreates table metadata information on the replication instance when a mismatch occurs. An example is a situation where running an alter DDL statement on a table might result in different information about the table cached in the replication instance.
ReadBackupOnly (boolean) –
When this attribute is set to
Y
, DMS only reads changes from transaction log backups and doesn’t read from the active transaction log file during ongoing replication. Setting this parameter toY
enables you to control active transaction log file growth during full load and ongoing replication tasks. However, it can add some source latency to ongoing replication.SafeguardPolicy (string) –
Use this attribute to minimize the need to access the backup log and enable DMS to prevent truncation using one of the following two methods.
Start transactions in the database: This is the default method. When this method is used, DMS prevents TLOG truncation by mimicking a transaction in the database. As long as such a transaction is open, changes that appear after the transaction started aren’t truncated. If you need Microsoft Replication to be enabled in your database, then you must choose this method.
Exclusively use sp_repldone within a single task: When this method is used, DMS reads the changes and then uses sp_repldone to mark the TLOG transactions as ready for truncation. Although this method doesn’t involve any transactional activities, it can only be used when Microsoft Replication isn’t running. Also, when using this method, only one DMS task can access the database at any given time. Therefore, if you need to run parallel DMS tasks against the same database, use the default method.
ServerName (string) –
Fully qualified domain name of the endpoint. For an Amazon RDS SQL Server instance, this is the output of DescribeDBInstances, in the
Endpoint.Address
field.Username (string) –
Endpoint connection user name.
UseBcpFullLoad (boolean) –
Use this to attribute to transfer data for full-load operations using BCP. When the target table contains an identity column that does not exist in the source table, you must disable the use BCP for loading table option.
UseThirdPartyBackupDevice (boolean) –
When this attribute is set to
Y
, DMS processes third-party transaction log backups if they are created in native format.SecretsManagerAccessRoleArn (string) –
The full Amazon Resource Name (ARN) of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the value in
SecretsManagerSecret
. The role must allow theiam:PassRole
action.SecretsManagerSecret
has the value of the Amazon Web Services Secrets Manager secret that allows access to the SQL Server endpoint.Note
You can specify one of two sets of values for these permissions. You can specify the values for this setting and
SecretsManagerSecretId
. Or you can specify clear-text values forUserName
,Password
,ServerName
, andPort
. You can’t specify both. For more information on creating thisSecretsManagerSecret
and theSecretsManagerAccessRoleArn
andSecretsManagerSecretId
required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.SecretsManagerSecretId (string) –
The full ARN, partial ARN, or friendly name of the
SecretsManagerSecret
that contains the SQL Server endpoint connection details.TrimSpaceInChar (boolean) –
Use the
TrimSpaceInChar
source endpoint setting to trim data on CHAR and NCHAR data types during migration. The default value istrue
.TlogAccessMode (string) –
Indicates the mode used to fetch CDC data.
ForceLobLookup (boolean) –
Forces LOB lookup on inline LOB.
IBMDb2Settings (dict) –
The settings for the IBM Db2 LUW source endpoint. For more information, see the
IBMDb2Settings
structure.DatabaseName (string) –
Database name for the endpoint.
Password (string) –
Endpoint connection password.
Port (integer) –
Endpoint TCP port. The default value is 50000.
ServerName (string) –
Fully qualified domain name of the endpoint.
SetDataCaptureChanges (boolean) –
Enables ongoing replication (CDC) as a BOOLEAN value. The default is true.
CurrentLsn (string) –
For ongoing replication (CDC), use CurrentLSN to specify a log sequence number (LSN) where you want the replication to start.
MaxKBytesPerRead (integer) –
Maximum number of bytes per read, as a NUMBER value. The default is 64 KB.
Username (string) –
Endpoint connection user name.
SecretsManagerAccessRoleArn (string) –
The full Amazon Resource Name (ARN) of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the value in
SecretsManagerSecret
. The role must allow theiam:PassRole
action.SecretsManagerSecret
has the value of the Amazon Web Services Secrets Manager secret that allows access to the Db2 LUW endpoint.Note
You can specify one of two sets of values for these permissions. You can specify the values for this setting and
SecretsManagerSecretId
. Or you can specify clear-text values forUserName
,Password
,ServerName
, andPort
. You can’t specify both. For more information on creating thisSecretsManagerSecret
and theSecretsManagerAccessRoleArn
andSecretsManagerSecretId
required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.SecretsManagerSecretId (string) –
The full ARN, partial ARN, or friendly name of the
SecretsManagerSecret
that contains the Db2 LUW endpoint connection details.
DocDbSettings (dict) –
Provides information that defines a DocumentDB endpoint.
Username (string) –
The user name you use to access the DocumentDB source endpoint.
Password (string) –
The password for the user account you use to access the DocumentDB source endpoint.
ServerName (string) –
The name of the server on the DocumentDB source endpoint.
Port (integer) –
The port value for the DocumentDB source endpoint.
DatabaseName (string) –
The database name on the DocumentDB source endpoint.
NestingLevel (string) –
Specifies either document or table mode.
Default value is
"none"
. Specify"none"
to use document mode. Specify"one"
to use table mode.ExtractDocId (boolean) –
Specifies the document ID. Use this setting when
NestingLevel
is set to"none"
.Default value is
"false"
.DocsToInvestigate (integer) –
Indicates the number of documents to preview to determine the document organization. Use this setting when
NestingLevel
is set to"one"
.Must be a positive value greater than
0
. Default value is1000
.KmsKeyId (string) –
The KMS key identifier that is used to encrypt the content on the replication instance. If you don’t specify a value for the
KmsKeyId
parameter, then DMS uses your default encryption key. KMS creates the default encryption key for your Amazon Web Services account. Your Amazon Web Services account has a different default encryption key for each Amazon Web Services Region.SecretsManagerAccessRoleArn (string) –
The full Amazon Resource Name (ARN) of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the value in
SecretsManagerSecret
. The role must allow theiam:PassRole
action.SecretsManagerSecret
has the value of the Amazon Web Services Secrets Manager secret that allows access to the DocumentDB endpoint.Note
You can specify one of two sets of values for these permissions. You can specify the values for this setting and
SecretsManagerSecretId
. Or you can specify clear-text values forUserName
,Password
,ServerName
, andPort
. You can’t specify both. For more information on creating thisSecretsManagerSecret
and theSecretsManagerAccessRoleArn
andSecretsManagerSecretId
required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.SecretsManagerSecretId (string) –
The full ARN, partial ARN, or friendly name of the
SecretsManagerSecret
that contains the DocumentDB endpoint connection details.UseUpdateLookUp (boolean) –
If
true
, DMS retrieves the entire document from the DocumentDB source during migration. This may cause a migration failure if the server response exceeds bandwidth limits. To fetch only updates and deletes during migration, set this parameter tofalse
.ReplicateShardCollections (boolean) –
If
true
, DMS replicates data to shard collections. DMS only uses this setting if the target endpoint is a DocumentDB elastic cluster.When this setting is
true
, note the following:You must set
TargetTablePrepMode
tonothing
.DMS automatically sets
useUpdateLookup
tofalse
.
RedisSettings (dict) –
The settings for the Redis target endpoint. For more information, see the
RedisSettings
structure.ServerName (string) –
Fully qualified domain name of the endpoint.
Port (integer) –
Transmission Control Protocol (TCP) port for the endpoint.
SslSecurityProtocol (string) –
The connection to a Redis target endpoint using Transport Layer Security (TLS). Valid values include
plaintext
andssl-encryption
. The default isssl-encryption
. Thessl-encryption
option makes an encrypted connection. Optionally, you can identify an Amazon Resource Name (ARN) for an SSL certificate authority (CA) using the ``SslCaCertificateArn ``setting. If an ARN isn’t given for a CA, DMS uses the Amazon root CA.The
plaintext
option doesn’t provide Transport Layer Security (TLS) encryption for traffic between endpoint and database.AuthType (string) –
The type of authentication to perform when connecting to a Redis target. Options include
none
,auth-token
, andauth-role
. Theauth-token
option requires anAuthPassword
value to be provided. Theauth-role
option requiresAuthUserName
andAuthPassword
values to be provided.AuthUserName (string) –
The user name provided with the
auth-role
option of theAuthType
setting for a Redis target endpoint.AuthPassword (string) –
The password provided with the
auth-role
andauth-token
options of theAuthType
setting for a Redis target endpoint.SslCaCertificateArn (string) –
The Amazon Resource Name (ARN) for the certificate authority (CA) that DMS uses to connect to your Redis target endpoint.
GcpMySQLSettings (dict) –
Settings in JSON format for the source GCP MySQL endpoint.
AfterConnectScript (string) –
Specifies a script to run immediately after DMS connects to the endpoint. The migration task continues running regardless if the SQL statement succeeds or fails.
For this parameter, provide the code of the script itself, not the name of a file containing the script.
CleanSourceMetadataOnMismatch (boolean) –
Cleans and recreates table metadata information on the replication instance when a mismatch occurs. For example, in a situation where running an alter DDL on the table could result in different information about the table cached in the replication instance.
DatabaseName (string) –
Database name for the endpoint. For a MySQL source or target endpoint, don’t explicitly specify the database using the
DatabaseName
request parameter on either theCreateEndpoint
orModifyEndpoint
API call. SpecifyingDatabaseName
when you create or modify a MySQL endpoint replicates all the task tables to this single database. For MySQL endpoints, you specify the database only when you specify the schema in the table-mapping rules of the DMS task.EventsPollInterval (integer) –
Specifies how often to check the binary log for new changes/events when the database is idle. The default is five seconds.
Example:
eventsPollInterval=5;
In the example, DMS checks for changes in the binary logs every five seconds.
TargetDbType (string) –
Specifies where to migrate source tables on the target, either to a single database or multiple databases.
Example:
targetDbType=MULTIPLE_DATABASES
MaxFileSize (integer) –
Specifies the maximum size (in KB) of any .csv file used to transfer data to a MySQL-compatible database.
Example:
maxFileSize=512
ParallelLoadThreads (integer) –
Improves performance when loading data into the MySQL-compatible target database. Specifies how many threads to use to load the data into the MySQL-compatible target database. Setting a large number of threads can have an adverse effect on database performance, because a separate connection is required for each thread. The default is one.
Example:
parallelLoadThreads=1
Password (string) –
Endpoint connection password.
Port (integer) –
Endpoint TCP port.
ServerName (string) –
The MySQL host name.
ServerTimezone (string) –
Specifies the time zone for the source MySQL database.
Example:
serverTimezone=US/Pacific;
Note: Do not enclose time zones in single quotes.
Username (string) –
Endpoint connection user name.
SecretsManagerAccessRoleArn (string) –
The full Amazon Resource Name (ARN) of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the value in
SecretsManagerSecret.
The role must allow theiam:PassRole
action.SecretsManagerSecret
has the value of the Amazon Web Services Secrets Manager secret that allows access to the MySQL endpoint.Note
You can specify one of two sets of values for these permissions. You can specify the values for this setting and
SecretsManagerSecretId
. Or you can specify clear-text values forUserName
,Password
,ServerName
, andPort
. You can’t specify both. For more information on creating thisSecretsManagerSecret
and theSecretsManagerAccessRoleArn
andSecretsManagerSecretId
required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.SecretsManagerSecretId (string) –
The full ARN, partial ARN, or friendly name of the
SecretsManagerSecret
that contains the MySQL endpoint connection details.
TimestreamSettings (dict) –
The settings for the Amazon Timestream target endpoint. For more information, see the
TimestreamSettings
structure.DatabaseName (string) –
Database name for the endpoint.
MemoryDuration (integer) –
Set this attribute to specify the length of time to store all of the tables in memory that are migrated into Amazon Timestream from the source database. Time is measured in units of hours. When Timestream data comes in, it first resides in memory for the specified duration, which allows quick access to it.
MagneticDuration (integer) –
Set this attribute to specify the default magnetic duration applied to the Amazon Timestream tables in days. This is the number of days that records remain in magnetic store before being discarded. For more information, see Storage in the Amazon Timestream Developer Guide.
CdcInsertsAndUpdates (boolean) –
Set this attribute to
true
to specify that DMS only applies inserts and updates, and not deletes. Amazon Timestream does not allow deleting records, so if this value isfalse
, DMS nulls out the corresponding record in the Timestream database rather than deleting it.EnableMagneticStoreWrites (boolean) –
Set this attribute to
true
to enable memory store writes. When this value isfalse
, DMS does not write records that are older in days than the value specified inMagneticDuration
, because Amazon Timestream does not allow memory writes by default. For more information, see Storage in the Amazon Timestream Developer Guide.
Exceptions
DatabaseMigrationService.Client.exceptions.ResourceNotFoundFault
Examples
Returns information about the endpoints for your account in the current region.
response = client.describe_endpoints( Filters=[ { 'Name': 'string', 'Values': [ 'string', 'string', ], }, ], Marker='', MaxRecords=123, ) print(response)
Expected Output:
{ 'Endpoints': [ ], 'Marker': '', 'ResponseMetadata': { '...': '...', }, }