WAF / Client / update_ip_set

update_ip_set#

WAF.Client.update_ip_set(**kwargs)#

Note

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.

For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

Inserts or deletes IPSetDescriptor objects in an IPSet. For each IPSetDescriptor object, you specify the following values:

Whether to insert or delete the object from the array. If you want to change an IPSetDescriptor object, you delete the existing object and add a new one.
The IP address version, IPv4 or IPv6.
The IP address in CIDR notation, for example, 192.0.2.0/24 (for the range of IP addresses from 192.0.2.0 to 192.0.2.255) or 192.0.2.44/32 (for the individual IP address 192.0.2.44).

AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128. For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.

IPv6 addresses can be represented using any of the following formats:

1111:0000:0000:0000:0000:0000:0000:0111/128
1111:0:0:0:0:0:0:0111/128
1111::0111/128
1111::111/128

You use an IPSet to specify which web requests you want to allow or block based on the IP addresses that the requests originated from. For example, if you’re receiving a lot of requests from one or a small number of IP addresses and you want to block the requests, you can create an IPSet that specifies those IP addresses, and then configure AWS WAF to block the requests.

To create and configure an IPSet, perform the following steps:

Submit a CreateIPSet request.
Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request.
Submit an UpdateIPSet request to specify the IP addresses that you want AWS WAF to watch for.

When you update an IPSet, you specify the IP addresses that you want to add and/or the IP addresses that you want to delete. If you want to change an IP address, you delete the existing IP address and add the new one.

You can insert a maximum of 1000 addresses in a single request.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Request Syntax

response = client.update_ip_set(
    IPSetId='string',
    ChangeToken='string',
    Updates=[
        {
            'Action': 'INSERT'|'DELETE',
            'IPSetDescriptor': {
                'Type': 'IPV4'|'IPV6',
                'Value': 'string'
            }
        },
    ]
)

Parameters:

IPSetId (string) –
[REQUIRED]

The IPSetId of the IPSet that you want to update. IPSetId is returned by CreateIPSet and by ListIPSets.
ChangeToken (string) –
[REQUIRED]

The value returned by the most recent call to GetChangeToken.
Updates (list) –
[REQUIRED]

An array of IPSetUpdate objects that you want to insert into or delete from an IPSet. For more information, see the applicable data types:
- IPSetUpdate: Contains Action and IPSetDescriptor
- IPSetDescriptor: Contains Type and Value
You can insert a maximum of 1000 addresses in a single request.
- (dict) –
  
  Note
  This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
  
  For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
  
  Specifies the type of update to perform to an IPSet with UpdateIPSet.
  - Action (string) – [REQUIRED]
    
    Specifies whether to insert or delete an IP address with UpdateIPSet.
  - IPSetDescriptor (dict) – [REQUIRED]
    
    The IP address type ( IPV4 or IPV6) and the IP address range (in CIDR notation) that web requests originate from.
    - Type (string) – [REQUIRED]
      
      Specify IPV4 or IPV6.
    - Value (string) – [REQUIRED]
      
      Specify an IPv4 address by using CIDR notation. For example:
      - To configure AWS WAF to allow, block, or count requests that originated from the IP address 192.0.2.44, specify 192.0.2.44/32.
      - To configure AWS WAF to allow, block, or count requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.
      For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.
      
      Specify an IPv6 address by using CIDR notation. For example:
      - To configure AWS WAF to allow, block, or count requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify 1111:0000:0000:0000:0000:0000:0000:0111/128.
      - To configure AWS WAF to allow, block, or count requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify 1111:0000:0000:0000:0000:0000:0000:0000/64.

Return type:

dict

Returns:

Response Syntax

{
    'ChangeToken': 'string'
}

Response Structure

(dict) –
- ChangeToken (string) –
  
  The ChangeToken that you used to submit the UpdateIPSet request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.

Exceptions

WAF.Client.exceptions.WAFStaleDataException
WAF.Client.exceptions.WAFInternalErrorException
WAF.Client.exceptions.WAFInvalidAccountException
WAF.Client.exceptions.WAFInvalidOperationException
WAF.Client.exceptions.WAFInvalidParameterException
WAF.Client.exceptions.WAFNonexistentContainerException
WAF.Client.exceptions.WAFNonexistentItemException
WAF.Client.exceptions.WAFReferencedItemException
WAF.Client.exceptions.WAFLimitsExceededException

Examples

The following example deletes an IPSetDescriptor object in an IP match set with the ID example1ds3t-46da-4fdb-b8d5-abc321j569j5.

response = client.update_ip_set(
    ChangeToken='abcd12f2-46da-4fdb-b8d5-fbd4c466928f',
    IPSetId='example1ds3t-46da-4fdb-b8d5-abc321j569j5',
    Updates=[
        {
            'Action': 'DELETE',
            'IPSetDescriptor': {
                'Type': 'IPV4',
                'Value': '192.0.2.44/32',
            },
        },
    ],
)

print(response)

Expected Output:

{
    'ChangeToken': 'abcd12f2-46da-4fdb-b8d5-fbd4c466928f',
    'ResponseMetadata': {
        '...': '...',
    },
}