EC2 / Client / create_transit_gateway_vpc_attachment

create_transit_gateway_vpc_attachment#

EC2.Client.create_transit_gateway_vpc_attachment(**kwargs)#

Attaches the specified VPC to the specified transit gateway.

If you attach a VPC with a CIDR range that overlaps the CIDR range of a VPC that is already attached, the new VPC CIDR range is not propagated to the default propagation route table.

To send VPC traffic to an attached transit gateway, add a route to the VPC route table using CreateRoute.

Request Syntax

response = client.create_transit_gateway_vpc_attachment(
    TransitGatewayId='string',
    VpcId='string',
    SubnetIds=[
        'string',
    ],
    Options={
        'DnsSupport': 'enable'|'disable',
        'Ipv6Support': 'enable'|'disable',
        'ApplianceModeSupport': 'enable'|'disable'
    },
    TagSpecifications=[
        {
            'ResourceType': 'capacity-reservation'|'client-vpn-endpoint'|'customer-gateway'|'carrier-gateway'|'coip-pool'|'dedicated-host'|'dhcp-options'|'egress-only-internet-gateway'|'elastic-ip'|'elastic-gpu'|'export-image-task'|'export-instance-task'|'fleet'|'fpga-image'|'host-reservation'|'image'|'import-image-task'|'import-snapshot-task'|'instance'|'instance-event-window'|'internet-gateway'|'ipam'|'ipam-pool'|'ipam-scope'|'ipv4pool-ec2'|'ipv6pool-ec2'|'key-pair'|'launch-template'|'local-gateway'|'local-gateway-route-table'|'local-gateway-virtual-interface'|'local-gateway-virtual-interface-group'|'local-gateway-route-table-vpc-association'|'local-gateway-route-table-virtual-interface-group-association'|'natgateway'|'network-acl'|'network-interface'|'network-insights-analysis'|'network-insights-path'|'network-insights-access-scope'|'network-insights-access-scope-analysis'|'placement-group'|'prefix-list'|'replace-root-volume-task'|'reserved-instances'|'route-table'|'security-group'|'security-group-rule'|'snapshot'|'spot-fleet-request'|'spot-instances-request'|'subnet'|'subnet-cidr-reservation'|'traffic-mirror-filter'|'traffic-mirror-session'|'traffic-mirror-target'|'transit-gateway'|'transit-gateway-attachment'|'transit-gateway-connect-peer'|'transit-gateway-multicast-domain'|'transit-gateway-policy-table'|'transit-gateway-route-table'|'transit-gateway-route-table-announcement'|'volume'|'vpc'|'vpc-endpoint'|'vpc-endpoint-connection'|'vpc-endpoint-service'|'vpc-endpoint-service-permission'|'vpc-peering-connection'|'vpn-connection'|'vpn-gateway'|'vpc-flow-log'|'capacity-reservation-fleet'|'traffic-mirror-filter-rule'|'vpc-endpoint-connection-device-type'|'verified-access-instance'|'verified-access-group'|'verified-access-endpoint'|'verified-access-policy'|'verified-access-trust-provider'|'vpn-connection-device-type'|'vpc-block-public-access-exclusion'|'ipam-resource-discovery'|'ipam-resource-discovery-association'|'instance-connect-endpoint',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ]
        },
    ],
    DryRun=True|False
)

Parameters:

TransitGatewayId (string) –
[REQUIRED]

The ID of the transit gateway.
VpcId (string) –
[REQUIRED]

The ID of the VPC.
SubnetIds (list) –
[REQUIRED]

The IDs of one or more subnets. You can specify only one subnet per Availability Zone. You must specify at least one subnet, but we recommend that you specify two subnets for better availability. The transit gateway uses one IP address from each specified subnet.
- (string) –
Options (dict) –
The VPC attachment options.
- DnsSupport (string) –
  
  Enable or disable DNS support. The default is enable.
- Ipv6Support (string) –
  
  Enable or disable IPv6 support. The default is disable.
- ApplianceModeSupport (string) –
  
  Enable or disable support for appliance mode. If enabled, a traffic flow between a source and destination uses the same Availability Zone for the VPC attachment for the lifetime of that flow. The default is disable.
TagSpecifications (list) –
The tags to apply to the VPC attachment.
- (dict) –
  
  The tags to apply to a resource when the resource is being created. When you specify a tag, you must specify the resource type to tag, otherwise the request will fail.
  
  Note
  The Valid Values lists all the resource types that can be tagged. However, the action you’re using might not support tagging all of these resource types. If you try to tag a resource type that is unsupported for the action you’re using, you’ll get an error.
  - ResourceType (string) –
    
    The type of resource to tag on creation.
  - Tags (list) –
    
    The tags to apply to the resource.
    - (dict) –
      
      Describes a tag.
      - Key (string) –
        
        The key of the tag.
        
        Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.
      - Value (string) –
        
        The value of the tag.
        
        Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.
DryRun (boolean) – Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

Return type:

dict

Returns:

Response Syntax

{
    'TransitGatewayVpcAttachment': {
        'TransitGatewayAttachmentId': 'string',
        'TransitGatewayId': 'string',
        'VpcId': 'string',
        'VpcOwnerId': 'string',
        'State': 'initiating'|'initiatingRequest'|'pendingAcceptance'|'rollingBack'|'pending'|'available'|'modifying'|'deleting'|'deleted'|'failed'|'rejected'|'rejecting'|'failing',
        'SubnetIds': [
            'string',
        ],
        'CreationTime': datetime(2015, 1, 1),
        'Options': {
            'DnsSupport': 'enable'|'disable',
            'Ipv6Support': 'enable'|'disable',
            'ApplianceModeSupport': 'enable'|'disable'
        },
        'Tags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ]
    }
}

Response Structure

(dict) –
- TransitGatewayVpcAttachment (dict) –
  
  Information about the VPC attachment.
  - TransitGatewayAttachmentId (string) –
    
    The ID of the attachment.
  - TransitGatewayId (string) –
    
    The ID of the transit gateway.
  - VpcId (string) –
    
    The ID of the VPC.
  - VpcOwnerId (string) –
    
    The ID of the Amazon Web Services account that owns the VPC.
  - State (string) –
    
    The state of the VPC attachment. Note that the initiating state has been deprecated.
  - SubnetIds (list) –
    
    The IDs of the subnets.
    - (string) –
  - CreationTime (datetime) –
    
    The creation time.
  - Options (dict) –
    
    The VPC attachment options.
    - DnsSupport (string) –
      
      Indicates whether DNS support is enabled.
    - Ipv6Support (string) –
      
      Indicates whether IPv6 support is disabled.
    - ApplianceModeSupport (string) –
      
      Indicates whether appliance mode support is enabled.
  - Tags (list) –
    
    The tags for the VPC attachment.
    - (dict) –
      
      Describes a tag.
      - Key (string) –
        
        The key of the tag.
        
        Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.
      - Value (string) –
        
        The value of the tag.
        
        Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.