S3 / Client / complete_multipart_upload

complete_multipart_upload#

S3.Client.complete_multipart_upload(**kwargs)#

Completes a multipart upload by assembling previously uploaded parts.

You first initiate the multipart upload and then upload all parts using the UploadPart operation. After successfully uploading all relevant parts of an upload, you call this action to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the Complete Multipart Upload request, you must provide the parts list. You must ensure that the parts list is complete. This action concatenates the parts that you provide in the list. For each part in the list, you must provide the part number and the ETag value, returned after that part was uploaded.

Processing of a Complete Multipart Upload request could take several minutes to complete. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. A request could fail after the initial 200 OK response has been sent. This means that a 200 OK response can contain either a success or an error. If you call the S3 API directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throws an exception (or, for the SDKs that don’t use exceptions, they return the error).

Note that if CompleteMultipartUpload fails, applications should be prepared to retry the failed requests. For more information, see Amazon S3 Error Best Practices.

Warning

You cannot use Content-Type: application/x-www-form-urlencoded with Complete Multipart Upload requests. Also, if you do not provide a Content-Type header, CompleteMultipartUpload returns a 200 OK response.

For more information about multipart uploads, see Uploading Objects Using Multipart Upload.

For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions.

CompleteMultipartUpload has the following special errors:

Error code: EntityTooSmall
- Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.
- 400 Bad Request
Error code: InvalidPart
- Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified entity tag might not have matched the part’s entity tag.
- 400 Bad Request
Error code: InvalidPartOrder
- Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.
- 400 Bad Request
Error code: NoSuchUpload
- Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
- 404 Not Found

The following operations are related to CompleteMultipartUpload:

Request Syntax

response = client.complete_multipart_upload(
    Bucket='string',
    Key='string',
    MultipartUpload={
        'Parts': [
            {
                'ETag': 'string',
                'ChecksumCRC32': 'string',
                'ChecksumCRC32C': 'string',
                'ChecksumSHA1': 'string',
                'ChecksumSHA256': 'string',
                'PartNumber': 123
            },
        ]
    },
    UploadId='string',
    ChecksumCRC32='string',
    ChecksumCRC32C='string',
    ChecksumSHA1='string',
    ChecksumSHA256='string',
    RequestPayer='requester',
    ExpectedBucketOwner='string',
    SSECustomerAlgorithm='string',
    SSECustomerKey='string',

)

Parameters:

Bucket (string) –
[REQUIRED]

Name of the bucket to which the multipart upload was initiated.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
Key (string) –
[REQUIRED]

Object key for which the multipart upload was initiated.
MultipartUpload (dict) –
The container for the multipart upload request information.
- Parts (list) –
  
  Array of CompletedPart data types.
  
  If you do not supply a valid Part with your request, the service sends back an HTTP 400 response.
  - (dict) –
    
    Details of the parts that were uploaded.
    - ETag (string) –
      
      Entity tag returned when the part was uploaded.
    - ChecksumCRC32 (string) –
      
      The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
    - ChecksumCRC32C (string) –
      
      The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
    - ChecksumSHA1 (string) –
      
      The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
    - ChecksumSHA256 (string) –
      
      The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
    - PartNumber (integer) –
      
      Part number that identifies the part. This is a positive integer between 1 and 10,000.
UploadId (string) –
[REQUIRED]

ID for the initiated multipart upload.
ChecksumCRC32 (string) – This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
ChecksumCRC32C (string) – This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
ChecksumSHA1 (string) – This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
ChecksumSHA256 (string) – This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
RequestPayer (string) – Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination Amazon S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
ExpectedBucketOwner (string) – The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).
SSECustomerAlgorithm (string) – The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is required only when the object was created using a checksum algorithm or if your bucket policy requires the use of SSE-C. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
SSECustomerKey (string) – The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.
SSECustomerKeyMD5 (string) –
The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

Please note that this parameter is automatically populated if it is not provided. Including this parameter is not required

Return type:

dict

Returns:

Response Syntax

{
    'Location': 'string',
    'Bucket': 'string',
    'Key': 'string',
    'Expiration': 'string',
    'ETag': 'string',
    'ChecksumCRC32': 'string',
    'ChecksumCRC32C': 'string',
    'ChecksumSHA1': 'string',
    'ChecksumSHA256': 'string',
    'ServerSideEncryption': 'AES256'|'aws:kms'|'aws:kms:dsse',
    'VersionId': 'string',
    'SSEKMSKeyId': 'string',
    'BucketKeyEnabled': True|False,
    'RequestCharged': 'requester'
}

Response Structure

(dict) –
- Location (string) –
  
  The URI that identifies the newly created object.
- Bucket (string) –
  
  The name of the bucket that contains the newly created object. Does not return the access point ARN or access point alias if used.
  
  When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
  
  When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.
- Key (string) –
  
  The object key of the newly created object.
- Expiration (string) –
  
  If the object expiration is configured, this will contain the expiration date ( expiry-date) and rule ID ( rule-id). The value of rule-id is URL-encoded.
- ETag (string) –
  
  Entity tag that identifies the newly created object’s data. Objects with different object data will have different entity tags. The entity tag is an opaque string. The entity tag may or may not be an MD5 digest of the object data. If the entity tag is not an MD5 digest of the object data, it will contain one or more nonhexadecimal characters and/or will consist of less than 32 or more than 32 hexadecimal digits. For more information about how the entity tag is calculated, see Checking object integrity in the Amazon S3 User Guide.
- ChecksumCRC32 (string) –
  
  The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
- ChecksumCRC32C (string) –
  
  The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
- ChecksumSHA1 (string) –
  
  The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
- ChecksumSHA256 (string) –
  
  The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
- ServerSideEncryption (string) –
  
  The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
- VersionId (string) –
  
  Version ID of the newly created object, in case the bucket has versioning turned on.
- SSEKMSKeyId (string) –
  
  If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.
- BucketKeyEnabled (boolean) –
  
  Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
- RequestCharged (string) –
  
  If present, indicates that the requester was successfully charged for the request.

Examples

The following example completes a multipart upload.

response = client.complete_multipart_upload(
    Bucket='examplebucket',
    Key='bigobject',
    MultipartUpload={
        'Parts': [
            {
                'ETag': '"d8c2eafd90c266e19ab9dcacc479f8af"',
                'PartNumber': '1',
            },
            {
                'ETag': '"d8c2eafd90c266e19ab9dcacc479f8af"',
                'PartNumber': '2',
            },
        ],
    },
    UploadId='7YPBOJuoFiQ9cz4P3Pe6FIZwO4f7wN93uHsNBEw97pl5eNwzExg0LAT2dUN91cOmrEQHDsP3WA60CEg--',
)

print(response)

Expected Output:

{
    'Bucket': 'acexamplebucket',
    'ETag': '"4d9031c7644d8081c2829f4ea23c55f7-2"',
    'Key': 'bigobject',
    'Location': 'https://examplebucket.s3.amazonaws.com/bigobject',
    'ResponseMetadata': {
        '...': '...',
    },
}