DirectConnect / Client / delete_lag

delete_lag#

DirectConnect.Client.delete_lag(**kwargs)#

Deletes the specified link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.

Request Syntax

response = client.delete_lag(
    lagId='string'
)

Parameters:

lagId (string) –

[REQUIRED]

The ID of the LAG.

Return type:

dict

Returns:

Response Syntax

{
    'connectionsBandwidth': 'string',
    'numberOfConnections': 123,
    'lagId': 'string',
    'ownerAccount': 'string',
    'lagName': 'string',
    'lagState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'unknown',
    'location': 'string',
    'region': 'string',
    'minimumLinks': 123,
    'awsDevice': 'string',
    'awsDeviceV2': 'string',
    'awsLogicalDeviceId': 'string',
    'connections': [
        {
            'ownerAccount': 'string',
            'connectionId': 'string',
            'connectionName': 'string',
            'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected'|'unknown',
            'region': 'string',
            'location': 'string',
            'bandwidth': 'string',
            'vlan': 123,
            'partnerName': 'string',
            'loaIssueTime': datetime(2015, 1, 1),
            'lagId': 'string',
            'awsDevice': 'string',
            'jumboFrameCapable': True|False,
            'awsDeviceV2': 'string',
            'awsLogicalDeviceId': 'string',
            'hasLogicalRedundancy': 'unknown'|'yes'|'no',
            'tags': [
                {
                    'key': 'string',
                    'value': 'string'
                },
            ],
            'providerName': 'string',
            'macSecCapable': True|False,
            'portEncryptionStatus': 'string',
            'encryptionMode': 'string',
            'macSecKeys': [
                {
                    'secretARN': 'string',
                    'ckn': 'string',
                    'state': 'string',
                    'startOn': 'string'
                },
            ]
        },
    ],
    'allowsHostedConnections': True|False,
    'jumboFrameCapable': True|False,
    'hasLogicalRedundancy': 'unknown'|'yes'|'no',
    'tags': [
        {
            'key': 'string',
            'value': 'string'
        },
    ],
    'providerName': 'string',
    'macSecCapable': True|False,
    'encryptionMode': 'string',
    'macSecKeys': [
        {
            'secretARN': 'string',
            'ckn': 'string',
            'state': 'string',
            'startOn': 'string'
        },
    ]
}

Response Structure

(dict) –

Information about a link aggregation group (LAG).
- connectionsBandwidth (string) –
  
  The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.
- numberOfConnections (integer) –
  
  The number of physical dedicated connections bundled by the LAG, up to a maximum of 10.
- lagId (string) –
  
  The ID of the LAG.
- ownerAccount (string) –
  
  The ID of the Amazon Web Services account that owns the LAG.
- lagName (string) –
  
  The name of the LAG.
- lagState (string) –
  
  The state of the LAG. The following are the possible values:
  - requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of Authorization (LOA) is available.
  - pending: The LAG has been approved and is being initialized.
  - available: The network link is established and the LAG is ready for use.
  - down: The network link is down.
  - deleting: The LAG is being deleted.
  - deleted: The LAG is deleted.
  - unknown: The state of the LAG is not available.
- location (string) –
  
  The location of the LAG.
- region (string) –
  
  The Amazon Web Services Region where the connection is located.
- minimumLinks (integer) –
  
  The minimum number of physical dedicated connections that must be operational for the LAG itself to be operational.
- awsDevice (string) –
  
  The Direct Connect endpoint that hosts the LAG.
- awsDeviceV2 (string) –
  
  The Direct Connect endpoint that hosts the LAG.
- awsLogicalDeviceId (string) –
  
  The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
- connections (list) –
  
  The connections bundled by the LAG.
  - (dict) –
    
    Information about an Direct Connect connection.
    - ownerAccount (string) –
      
      The ID of the Amazon Web Services account that owns the connection.
    - connectionId (string) –
      
      The ID of the connection.
    - connectionName (string) –
      
      The name of the connection.
    - connectionState (string) –
      
      The state of the connection. The following are the possible values:
      - ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
      - requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
      - pending: The connection has been approved and is being initialized.
      - available: The network link is up and the connection is ready for use.
      - down: The network link is down.
      - deleting: The connection is being deleted.
      - deleted: The connection has been deleted.
      - rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.
      - unknown: The state of the connection is not available.
    - region (string) –
      
      The Amazon Web Services Region where the connection is located.
    - location (string) –
      
      The location of the connection.
    - bandwidth (string) –
      
      The bandwidth of the connection.
    - vlan (integer) –
      
      The ID of the VLAN.
    - partnerName (string) –
      
      The name of the Direct Connect service provider associated with the connection.
    - loaIssueTime (datetime) –
      
      The time of the most recent call to DescribeLoa for this connection.
    - lagId (string) –
      
      The ID of the LAG.
    - awsDevice (string) –
      
      The Direct Connect endpoint on which the physical connection terminates.
    - jumboFrameCapable (boolean) –
      
      Indicates whether jumbo frames are supported.
    - awsDeviceV2 (string) –
      
      The Direct Connect endpoint that terminates the physical connection.
    - awsLogicalDeviceId (string) –
      
      The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
    - hasLogicalRedundancy (string) –
      
      Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
    - tags (list) –
      
      The tags associated with the connection.
      - (dict) –
        
        Information about a tag.
        
        key (string) –
        
        The key.
        
        value (string) –
        
        The value.
    - providerName (string) –
      
      The name of the service provider associated with the connection.
    - macSecCapable (boolean) –
      
      Indicates whether the connection supports MAC Security (MACsec).
    - portEncryptionStatus (string) –
      
      The MAC Security (MACsec) port link status of the connection.
      
      The valid values are Encryption Up, which means that there is an active Connection Key Name, or Encryption Down.
    - encryptionMode (string) –
      
      The MAC Security (MACsec) connection encryption mode.
      
      The valid values are no_encrypt, should_encrypt, and must_encrypt.
    - macSecKeys (list) –
      
      The MAC Security (MACsec) security keys associated with the connection.
      - (dict) –
        
        Information about the MAC Security (MACsec) secret key.
        
        secretARN (string) –
        
        The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key.
        
        ckn (string) –
        
        The Connection Key Name (CKN) for the MAC Security secret key.
        
        state (string) –
        
        The state of the MAC Security (MACsec) secret key.
        
        The possible values are:
        
        associating: The MAC Security (MACsec) secret key is being validated and not yet associated with the connection or LAG.
        
        associated: The MAC Security (MACsec) secret key is validated and associated with the connection or LAG.
        
        disassociating: The MAC Security (MACsec) secret key is being disassociated from the connection or LAG
        
        disassociated: The MAC Security (MACsec) secret key is no longer associated with the connection or LAG.
        
        startOn (string) –
        
        The date that the MAC Security (MACsec) secret key takes effect. The value is displayed in UTC format.
- allowsHostedConnections (boolean) –
  
  Indicates whether the LAG can host other connections.
- jumboFrameCapable (boolean) –
  
  Indicates whether jumbo frames are supported.
- hasLogicalRedundancy (string) –
  
  Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).
- tags (list) –
  
  The tags associated with the LAG.
  - (dict) –
    
    Information about a tag.
    - key (string) –
      
      The key.
    - value (string) –
      
      The value.
- providerName (string) –
  
  The name of the service provider associated with the LAG.
- macSecCapable (boolean) –
  
  Indicates whether the LAG supports MAC Security (MACsec).
- encryptionMode (string) –
  
  The LAG MAC Security (MACsec) encryption mode.
  
  The valid values are no_encrypt, should_encrypt, and must_encrypt.
- macSecKeys (list) –
  
  The MAC Security (MACsec) security keys associated with the LAG.
  - (dict) –
    
    Information about the MAC Security (MACsec) secret key.
    - secretARN (string) –
      
      The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key.
    - ckn (string) –
      
      The Connection Key Name (CKN) for the MAC Security secret key.
    - state (string) –
      
      The state of the MAC Security (MACsec) secret key.
      
      The possible values are:
      - associating: The MAC Security (MACsec) secret key is being validated and not yet associated with the connection or LAG.
      - associated: The MAC Security (MACsec) secret key is validated and associated with the connection or LAG.
      - disassociating: The MAC Security (MACsec) secret key is being disassociated from the connection or LAG
      - disassociated: The MAC Security (MACsec) secret key is no longer associated with the connection or LAG.
    - startOn (string) –
      
      The date that the MAC Security (MACsec) secret key takes effect. The value is displayed in UTC format.

Exceptions

DirectConnect.Client.exceptions.DirectConnectServerException
DirectConnect.Client.exceptions.DirectConnectClientException