EC2 / Client / create_transit_gateway_connect

create_transit_gateway_connect#

EC2.Client.create_transit_gateway_connect(**kwargs)#

Creates a Connect attachment from a specified transit gateway attachment. A Connect attachment is a GRE-based tunnel attachment that you can use to establish a connection between a transit gateway and an appliance.

A Connect attachment uses an existing VPC or Amazon Web Services Direct Connect attachment as the underlying transport mechanism.

Request Syntax

response = client.create_transit_gateway_connect(
    TransportTransitGatewayAttachmentId='string',
    Options={
        'Protocol': 'gre'
    },
    TagSpecifications=[
        {
            'ResourceType': 'capacity-reservation'|'client-vpn-endpoint'|'customer-gateway'|'carrier-gateway'|'coip-pool'|'dedicated-host'|'dhcp-options'|'egress-only-internet-gateway'|'elastic-ip'|'elastic-gpu'|'export-image-task'|'export-instance-task'|'fleet'|'fpga-image'|'host-reservation'|'image'|'import-image-task'|'import-snapshot-task'|'instance'|'instance-event-window'|'internet-gateway'|'ipam'|'ipam-pool'|'ipam-scope'|'ipv4pool-ec2'|'ipv6pool-ec2'|'key-pair'|'launch-template'|'local-gateway'|'local-gateway-route-table'|'local-gateway-virtual-interface'|'local-gateway-virtual-interface-group'|'local-gateway-route-table-vpc-association'|'local-gateway-route-table-virtual-interface-group-association'|'natgateway'|'network-acl'|'network-interface'|'network-insights-analysis'|'network-insights-path'|'network-insights-access-scope'|'network-insights-access-scope-analysis'|'placement-group'|'prefix-list'|'replace-root-volume-task'|'reserved-instances'|'route-table'|'security-group'|'security-group-rule'|'snapshot'|'spot-fleet-request'|'spot-instances-request'|'subnet'|'subnet-cidr-reservation'|'traffic-mirror-filter'|'traffic-mirror-session'|'traffic-mirror-target'|'transit-gateway'|'transit-gateway-attachment'|'transit-gateway-connect-peer'|'transit-gateway-multicast-domain'|'transit-gateway-policy-table'|'transit-gateway-route-table'|'transit-gateway-route-table-announcement'|'volume'|'vpc'|'vpc-endpoint'|'vpc-endpoint-connection'|'vpc-endpoint-service'|'vpc-endpoint-service-permission'|'vpc-peering-connection'|'vpn-connection'|'vpn-gateway'|'vpc-flow-log'|'capacity-reservation-fleet'|'traffic-mirror-filter-rule'|'vpc-endpoint-connection-device-type'|'verified-access-instance'|'verified-access-group'|'verified-access-endpoint'|'verified-access-policy'|'verified-access-trust-provider'|'vpn-connection-device-type'|'vpc-block-public-access-exclusion'|'ipam-resource-discovery'|'ipam-resource-discovery-association'|'instance-connect-endpoint'|'ipam-external-resource-verification-token',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ]
        },
    ],
    DryRun=True|False
)

Parameters:

TransportTransitGatewayAttachmentId (string) –
[REQUIRED]

The ID of the transit gateway attachment. You can specify a VPC attachment or Amazon Web Services Direct Connect attachment.
Options (dict) –
[REQUIRED]

The Connect attachment options.
- Protocol (string) – [REQUIRED]
  
  The tunnel protocol.
TagSpecifications (list) –
The tags to apply to the Connect attachment.
- (dict) –
  
  The tags to apply to a resource when the resource is being created. When you specify a tag, you must specify the resource type to tag, otherwise the request will fail.
  
  Note
  The Valid Values lists all the resource types that can be tagged. However, the action you’re using might not support tagging all of these resource types. If you try to tag a resource type that is unsupported for the action you’re using, you’ll get an error.
  - ResourceType (string) –
    
    The type of resource to tag on creation.
  - Tags (list) –
    
    The tags to apply to the resource.
    - (dict) –
      
      Describes a tag.
      - Key (string) –
        
        The key of the tag.
        
        Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.
      - Value (string) –
        
        The value of the tag.
        
        Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.
DryRun (boolean) – Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

Return type:

dict

Returns:

Response Syntax

{
    'TransitGatewayConnect': {
        'TransitGatewayAttachmentId': 'string',
        'TransportTransitGatewayAttachmentId': 'string',
        'TransitGatewayId': 'string',
        'State': 'initiating'|'initiatingRequest'|'pendingAcceptance'|'rollingBack'|'pending'|'available'|'modifying'|'deleting'|'deleted'|'failed'|'rejected'|'rejecting'|'failing',
        'CreationTime': datetime(2015, 1, 1),
        'Options': {
            'Protocol': 'gre'
        },
        'Tags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ]
    }
}

Response Structure

(dict) –
- TransitGatewayConnect (dict) –
  
  Information about the Connect attachment.
  - TransitGatewayAttachmentId (string) –
    
    The ID of the Connect attachment.
  - TransportTransitGatewayAttachmentId (string) –
    
    The ID of the attachment from which the Connect attachment was created.
  - TransitGatewayId (string) –
    
    The ID of the transit gateway.
  - State (string) –
    
    The state of the attachment.
  - CreationTime (datetime) –
    
    The creation time.
  - Options (dict) –
    
    The Connect attachment options.
    - Protocol (string) –
      
      The tunnel protocol.
  - Tags (list) –
    
    The tags for the attachment.
    - (dict) –
      
      Describes a tag.
      - Key (string) –
        
        The key of the tag.
        
        Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.
      - Value (string) –
        
        The value of the tag.
        
        Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.