SES / Client / send_bulk_templated_email

send_bulk_templated_email#

SES.Client.send_bulk_templated_email(**kwargs)#

Composes an email message to multiple destinations. The message body is created using an email template.

To send email using this operation, your call must meet the following requirements:

The call must refer to an existing email template. You can create email templates using CreateTemplate.
The message must be sent from a verified email address or domain.
If your account is still in the Amazon SES sandbox, you may send only to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.
The maximum message size is 10 MB.
Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message is rejected, even if the message contains other recipients that are valid.
The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendBulkTemplatedEmail operation several times to send the message to each group.
The number of destinations you can contact in a single call can be limited by your account’s maximum sending rate.

Request Syntax

response = client.send_bulk_templated_email(
    Source='string',
    SourceArn='string',
    ReplyToAddresses=[
        'string',
    ],
    ReturnPath='string',
    ReturnPathArn='string',
    ConfigurationSetName='string',
    DefaultTags=[
        {
            'Name': 'string',
            'Value': 'string'
        },
    ],
    Template='string',
    TemplateArn='string',
    DefaultTemplateData='string',
    Destinations=[
        {
            'Destination': {
                'ToAddresses': [
                    'string',
                ],
                'CcAddresses': [
                    'string',
                ],
                'BccAddresses': [
                    'string',
                ]
            },
            'ReplacementTags': [
                {
                    'Name': 'string',
                    'Value': 'string'
                },
            ],
            'ReplacementTemplateData': 'string'
        },
    ]
)

Parameters:

Source (string) –
[REQUIRED]

The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide.

If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.

Note
Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the email address string must be 7-bit ASCII. If you want to send to or from email addresses that contain Unicode characters in the domain part of an address, you must encode the domain using Punycode. Punycode is not permitted in the local part of the email address (the part before the @ sign) nor in the “friendly from” name. If you want to use Unicode characters in the “friendly from” name, you must encode the “friendly from” name using MIME encoded-word syntax, as described in Sending raw email using the Amazon SES API. For more information about Punycode, see RFC 3492.
SourceArn (string) –
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter.

For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com.

For more information about sending authorization, see the Amazon SES Developer Guide.
ReplyToAddresses (list) –
The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address receives the reply.
- (string) –
ReturnPath (string) – The email address that bounces and complaints are forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message is returned from the recipient’s ISP; this message is forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.
ReturnPathArn (string) –
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter.

For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com.

For more information about sending authorization, see the Amazon SES Developer Guide.
ConfigurationSetName (string) – The name of the configuration set to use when you send an email using SendBulkTemplatedEmail.
DefaultTags (list) –
A list of tags, in the form of name/value pairs, to apply to an email that you send to a destination using SendBulkTemplatedEmail.
- (dict) –
  
  Contains the name and value of a tag that you can provide to SendEmail or SendRawEmail to apply to an email.
  
  Message tags, which you use with configuration sets, enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.
  - Name (string) – [REQUIRED]
    
    The name of the tag. The name must meet the following requirements:
    - Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
    - Contain 256 characters or fewer.
  - Value (string) – [REQUIRED]
    
    The value of the tag. The value must meet the following requirements:
    - Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
    - Contain 256 characters or fewer.
Template (string) –
[REQUIRED]

The template to use when sending this email.
TemplateArn (string) – The ARN of the template to use when sending this email.
DefaultTemplateData (string) –
[REQUIRED]

A list of replacement values to apply to the template when replacement data is not specified in a Destination object. These values act as a default or fallback option when no other data is available.

The template data is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.
Destinations (list) –
[REQUIRED]

One or more Destination objects. All of the recipients in a Destination receive the same version of the email. You can specify up to 50 Destination objects within a Destinations array.
- (dict) –
  
  An array that contains one or more Destinations, as well as the tags and replacement data associated with each of those Destinations.
  - Destination (dict) – [REQUIRED]
    
    Represents the destination of the message, consisting of To:, CC:, and BCC: fields.
    
    Note
    Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the email address string must be 7-bit ASCII. If you want to send to or from email addresses that contain Unicode characters in the domain part of an address, you must encode the domain using Punycode. Punycode is not permitted in the local part of the email address (the part before the @ sign) nor in the “friendly from” name. If you want to use Unicode characters in the “friendly from” name, you must encode the “friendly from” name using MIME encoded-word syntax, as described in Sending raw email using the Amazon SES API. For more information about Punycode, see RFC 3492.
    - ToAddresses (list) –
      
      The recipients to place on the To: line of the message.
      - (string) –
    - CcAddresses (list) –
      
      The recipients to place on the CC: line of the message.
      - (string) –
    - BccAddresses (list) –
      
      The recipients to place on the BCC: line of the message.
      - (string) –
  - ReplacementTags (list) –
    
    A list of tags, in the form of name/value pairs, to apply to an email that you send using SendBulkTemplatedEmail. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.
    - (dict) –
      
      Contains the name and value of a tag that you can provide to SendEmail or SendRawEmail to apply to an email.
      
      Message tags, which you use with configuration sets, enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.
      - Name (string) – [REQUIRED]
        
        The name of the tag. The name must meet the following requirements:
        
        Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
        
        Contain 256 characters or fewer.
      - Value (string) – [REQUIRED]
        
        The value of the tag. The value must meet the following requirements:
        
        Contain only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
        
        Contain 256 characters or fewer.
  - ReplacementTemplateData (string) –
    
    A list of replacement values to apply to the template. This parameter is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.

Return type:

dict

Returns:

Response Syntax

{
    'Status': [
        {
            'Status': 'Success'|'MessageRejected'|'MailFromDomainNotVerified'|'ConfigurationSetDoesNotExist'|'TemplateDoesNotExist'|'AccountSuspended'|'AccountThrottled'|'AccountDailyQuotaExceeded'|'InvalidSendingPoolName'|'AccountSendingPaused'|'ConfigurationSetSendingPaused'|'InvalidParameterValue'|'TransientFailure'|'Failed',
            'Error': 'string',
            'MessageId': 'string'
        },
    ]
}

Response Structure

(dict) –
- Status (list) –
  
  One object per intended recipient. Check each response object and retry any messages with a failure status. (Note that order of responses will be respective to order of destinations in the request.)Receipt rules enable you to specify which actions
  - (dict) –
    
    An object that contains the response from the SendBulkTemplatedEmail operation.
    - Status (string) –
      
      The status of a message sent using the SendBulkTemplatedEmail operation.
      
      Possible values for this parameter include:
      - Success: Amazon SES accepted the message, and attempts to deliver it to the recipients.
      - MessageRejected: The message was rejected because it contained a virus.
      - MailFromDomainNotVerified: The sender’s email address or domain was not verified.
      - ConfigurationSetDoesNotExist: The configuration set you specified does not exist.
      - TemplateDoesNotExist: The template you specified does not exist.
      - AccountSuspended: Your account has been shut down because of issues related to your email sending practices.
      - AccountThrottled: The number of emails you can send has been reduced because your account has exceeded its allocated sending limit.
      - AccountDailyQuotaExceeded: You have reached or exceeded the maximum number of emails you can send from your account in a 24-hour period.
      - InvalidSendingPoolName: The configuration set you specified refers to an IP pool that does not exist.
      - AccountSendingPaused: Email sending for the Amazon SES account was disabled using the UpdateAccountSendingEnabled operation.
      - ConfigurationSetSendingPaused: Email sending for this configuration set was disabled using the UpdateConfigurationSetSendingEnabled operation.
      - InvalidParameterValue: One or more of the parameters you specified when calling this operation was invalid. See the error message for additional information.
      - TransientFailure: Amazon SES was unable to process your request because of a temporary issue.
      - Failed: Amazon SES was unable to process your request. See the error message for additional information.
    - Error (string) –
      
      A description of an error that prevented a message being sent using the SendBulkTemplatedEmail operation.
    - MessageId (string) –
      
      The unique message identifier returned from the SendBulkTemplatedEmail operation.

Exceptions

SES.Client.exceptions.MessageRejected
SES.Client.exceptions.MailFromDomainNotVerifiedException
SES.Client.exceptions.ConfigurationSetDoesNotExistException
SES.Client.exceptions.TemplateDoesNotExistException
SES.Client.exceptions.ConfigurationSetSendingPausedException
SES.Client.exceptions.AccountSendingPausedException