EC2 / Client / create_vpc_endpoint

create_vpc_endpoint#

EC2.Client.create_vpc_endpoint(**kwargs)#

Creates a VPC endpoint. A VPC endpoint provides a private connection between the specified VPC and the specified endpoint service. You can use an endpoint service provided by Amazon Web Services, an Amazon Web Services Marketplace Partner, or another Amazon Web Services account. For more information, see the Amazon Web Services PrivateLink User Guide.

Request Syntax

response = client.create_vpc_endpoint(
    DryRun=True|False,
    VpcEndpointType='Interface'|'Gateway'|'GatewayLoadBalancer',
    VpcId='string',
    ServiceName='string',
    PolicyDocument='string',
    RouteTableIds=[
        'string',
    ],
    SubnetIds=[
        'string',
    ],
    SecurityGroupIds=[
        'string',
    ],
    IpAddressType='ipv4'|'dualstack'|'ipv6',
    DnsOptions={
        'DnsRecordIpType': 'ipv4'|'dualstack'|'ipv6'|'service-defined',
        'PrivateDnsOnlyForInboundResolverEndpoint': True|False
    },
    ClientToken='string',
    PrivateDnsEnabled=True|False,
    TagSpecifications=[
        {
            'ResourceType': 'capacity-reservation'|'client-vpn-endpoint'|'customer-gateway'|'carrier-gateway'|'coip-pool'|'dedicated-host'|'dhcp-options'|'egress-only-internet-gateway'|'elastic-ip'|'elastic-gpu'|'export-image-task'|'export-instance-task'|'fleet'|'fpga-image'|'host-reservation'|'image'|'import-image-task'|'import-snapshot-task'|'instance'|'instance-event-window'|'internet-gateway'|'ipam'|'ipam-pool'|'ipam-scope'|'ipv4pool-ec2'|'ipv6pool-ec2'|'key-pair'|'launch-template'|'local-gateway'|'local-gateway-route-table'|'local-gateway-virtual-interface'|'local-gateway-virtual-interface-group'|'local-gateway-route-table-vpc-association'|'local-gateway-route-table-virtual-interface-group-association'|'natgateway'|'network-acl'|'network-interface'|'network-insights-analysis'|'network-insights-path'|'network-insights-access-scope'|'network-insights-access-scope-analysis'|'placement-group'|'prefix-list'|'replace-root-volume-task'|'reserved-instances'|'route-table'|'security-group'|'security-group-rule'|'snapshot'|'spot-fleet-request'|'spot-instances-request'|'subnet'|'subnet-cidr-reservation'|'traffic-mirror-filter'|'traffic-mirror-session'|'traffic-mirror-target'|'transit-gateway'|'transit-gateway-attachment'|'transit-gateway-connect-peer'|'transit-gateway-multicast-domain'|'transit-gateway-policy-table'|'transit-gateway-route-table'|'transit-gateway-route-table-announcement'|'volume'|'vpc'|'vpc-endpoint'|'vpc-endpoint-connection'|'vpc-endpoint-service'|'vpc-endpoint-service-permission'|'vpc-peering-connection'|'vpn-connection'|'vpn-gateway'|'vpc-flow-log'|'capacity-reservation-fleet'|'traffic-mirror-filter-rule'|'vpc-endpoint-connection-device-type'|'verified-access-instance'|'verified-access-group'|'verified-access-endpoint'|'verified-access-policy'|'verified-access-trust-provider'|'vpn-connection-device-type'|'vpc-block-public-access-exclusion'|'ipam-resource-discovery'|'ipam-resource-discovery-association'|'instance-connect-endpoint'|'ipam-external-resource-verification-token',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ]
        },
    ],
    SubnetConfigurations=[
        {
            'SubnetId': 'string',
            'Ipv4': 'string',
            'Ipv6': 'string'
        },
    ]
)

Parameters:

DryRun (boolean) – Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
VpcEndpointType (string) –
The type of endpoint.

Default: Gateway
VpcId (string) –
[REQUIRED]

The ID of the VPC.
ServiceName (string) –
[REQUIRED]

The name of the endpoint service.
PolicyDocument (string) – (Interface and gateway endpoints) A policy to attach to the endpoint that controls access to the service. The policy must be in valid JSON format. If this parameter is not specified, we attach a default policy that allows full access to the service.
RouteTableIds (list) –
(Gateway endpoint) The route table IDs.
- (string) –
SubnetIds (list) –
(Interface and Gateway Load Balancer endpoints) The IDs of the subnets in which to create endpoint network interfaces. For a Gateway Load Balancer endpoint, you can specify only one subnet.
- (string) –
SecurityGroupIds (list) –
(Interface endpoint) The IDs of the security groups to associate with the endpoint network interfaces. If this parameter is not specified, we use the default security group for the VPC.
- (string) –
IpAddressType (string) – The IP address type for the endpoint.
DnsOptions (dict) –
The DNS options for the endpoint.
- DnsRecordIpType (string) –
  
  The DNS records created for the endpoint.
- PrivateDnsOnlyForInboundResolverEndpoint (boolean) –
  
  Indicates whether to enable private DNS only for inbound endpoints. This option is available only for services that support both gateway and interface endpoints. It routes traffic that originates from the VPC to the gateway endpoint and traffic that originates from on-premises to the interface endpoint.
ClientToken (string) – Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
PrivateDnsEnabled (boolean) –
(Interface endpoint) Indicates whether to associate a private hosted zone with the specified VPC. The private hosted zone contains a record set for the default public DNS name for the service for the Region (for example, kinesis.us-east-1.amazonaws.com), which resolves to the private IP addresses of the endpoint network interfaces in the VPC. This enables you to make requests to the default public DNS name for the service instead of the public DNS names that are automatically generated by the VPC endpoint service.

To use a private hosted zone, you must set the following VPC attributes to true: enableDnsHostnames and enableDnsSupport. Use ModifyVpcAttribute to set the VPC attributes.

Default: true
TagSpecifications (list) –
The tags to associate with the endpoint.
- (dict) –
  
  The tags to apply to a resource when the resource is being created. When you specify a tag, you must specify the resource type to tag, otherwise the request will fail.
  
  Note
  The Valid Values lists all the resource types that can be tagged. However, the action you’re using might not support tagging all of these resource types. If you try to tag a resource type that is unsupported for the action you’re using, you’ll get an error.
  - ResourceType (string) –
    
    The type of resource to tag on creation.
  - Tags (list) –
    
    The tags to apply to the resource.
    - (dict) –
      
      Describes a tag.
      - Key (string) –
        
        The key of the tag.
        
        Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.
      - Value (string) –
        
        The value of the tag.
        
        Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.
SubnetConfigurations (list) –
The subnet configurations for the endpoint.
- (dict) –
  
  Describes the configuration of a subnet for a VPC endpoint.
  - SubnetId (string) –
    
    The ID of the subnet.
  - Ipv4 (string) –
    
    The IPv4 address to assign to the endpoint network interface in the subnet. You must provide an IPv4 address if the VPC endpoint supports IPv4.
    
    If you specify an IPv4 address when modifying a VPC endpoint, we replace the existing endpoint network interface with a new endpoint network interface with this IP address. This process temporarily disconnects the subnet and the VPC endpoint.
  - Ipv6 (string) –
    
    The IPv6 address to assign to the endpoint network interface in the subnet. You must provide an IPv6 address if the VPC endpoint supports IPv6.
    
    If you specify an IPv6 address when modifying a VPC endpoint, we replace the existing endpoint network interface with a new endpoint network interface with this IP address. This process temporarily disconnects the subnet and the VPC endpoint.

Return type:

dict

Returns:

Response Syntax

{
    'VpcEndpoint': {
        'VpcEndpointId': 'string',
        'VpcEndpointType': 'Interface'|'Gateway'|'GatewayLoadBalancer',
        'VpcId': 'string',
        'ServiceName': 'string',
        'State': 'PendingAcceptance'|'Pending'|'Available'|'Deleting'|'Deleted'|'Rejected'|'Failed'|'Expired',
        'PolicyDocument': 'string',
        'RouteTableIds': [
            'string',
        ],
        'SubnetIds': [
            'string',
        ],
        'Groups': [
            {
                'GroupId': 'string',
                'GroupName': 'string'
            },
        ],
        'IpAddressType': 'ipv4'|'dualstack'|'ipv6',
        'DnsOptions': {
            'DnsRecordIpType': 'ipv4'|'dualstack'|'ipv6'|'service-defined',
            'PrivateDnsOnlyForInboundResolverEndpoint': True|False
        },
        'PrivateDnsEnabled': True|False,
        'RequesterManaged': True|False,
        'NetworkInterfaceIds': [
            'string',
        ],
        'DnsEntries': [
            {
                'DnsName': 'string',
                'HostedZoneId': 'string'
            },
        ],
        'CreationTimestamp': datetime(2015, 1, 1),
        'Tags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ],
        'OwnerId': 'string',
        'LastError': {
            'Message': 'string',
            'Code': 'string'
        }
    },
    'ClientToken': 'string'
}

Response Structure

(dict) –
- VpcEndpoint (dict) –
  
  Information about the endpoint.
  - VpcEndpointId (string) –
    
    The ID of the endpoint.
  - VpcEndpointType (string) –
    
    The type of endpoint.
  - VpcId (string) –
    
    The ID of the VPC to which the endpoint is associated.
  - ServiceName (string) –
    
    The name of the service to which the endpoint is associated.
  - State (string) –
    
    The state of the endpoint.
  - PolicyDocument (string) –
    
    The policy document associated with the endpoint, if applicable.
  - RouteTableIds (list) –
    
    (Gateway endpoint) The IDs of the route tables associated with the endpoint.
    - (string) –
  - SubnetIds (list) –
    
    (Interface endpoint) The subnets for the endpoint.
    - (string) –
  - Groups (list) –
    
    (Interface endpoint) Information about the security groups that are associated with the network interface.
    - (dict) –
      
      Describes a security group.
      - GroupId (string) –
        
        The ID of the security group.
      - GroupName (string) –
        
        The name of the security group.
  - IpAddressType (string) –
    
    The IP address type for the endpoint.
  - DnsOptions (dict) –
    
    The DNS options for the endpoint.
    - DnsRecordIpType (string) –
      
      The DNS records created for the endpoint.
    - PrivateDnsOnlyForInboundResolverEndpoint (boolean) –
      
      Indicates whether to enable private DNS only for inbound endpoints.
  - PrivateDnsEnabled (boolean) –
    
    (Interface endpoint) Indicates whether the VPC is associated with a private hosted zone.
  - RequesterManaged (boolean) –
    
    Indicates whether the endpoint is being managed by its service.
  - NetworkInterfaceIds (list) –
    
    (Interface endpoint) The network interfaces for the endpoint.
    - (string) –
  - DnsEntries (list) –
    
    (Interface endpoint) The DNS entries for the endpoint.
    - (dict) –
      
      Describes a DNS entry.
      - DnsName (string) –
        
        The DNS name.
      - HostedZoneId (string) –
        
        The ID of the private hosted zone.
  - CreationTimestamp (datetime) –
    
    The date and time that the endpoint was created.
  - Tags (list) –
    
    The tags assigned to the endpoint.
    - (dict) –
      
      Describes a tag.
      - Key (string) –
        
        The key of the tag.
        
        Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.
      - Value (string) –
        
        The value of the tag.
        
        Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.
  - OwnerId (string) –
    
    The ID of the Amazon Web Services account that owns the endpoint.
  - LastError (dict) –
    
    The last error that occurred for endpoint.
    - Message (string) –
      
      The error message for the VPC endpoint error.
    - Code (string) –
      
      The error code for the VPC endpoint error.
- ClientToken (string) –
  
  Unique, case-sensitive identifier that you provide to ensure the idempotency of the request.