MultipartUploadPart / Action / upload
upload#
- S3.MultipartUploadPart.upload(**kwargs)#
Uploads a part in a multipart upload.
Note
In this operation, you provide new data as a part of an object in your request. However, you have an option to specify your existing Amazon S3 object as a data source for the part you are uploading. To upload a part from an existing object, you use the UploadPartCopy operation.
You must initiate a multipart upload (see CreateMultipartUpload) before you can upload any part. In response to your initiate request, Amazon S3 returns an upload ID, a unique identifier that you must include in your upload part request.
Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten.
For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.
Note
After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.
For more information on multipart uploads, go to Multipart Upload Overview in the *Amazon S3 User Guide *.
Note
Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format ``https://bucket_name.s3express-az_id.region.amazonaws.com/key-name ``. Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.
Permissions
General purpose bucket permissions - To perform a multipart upload with encryption using an Key Management Service key, the requester must have permission to the
kms:Decrypt
andkms:GenerateDataKey
actions on the key. The requester must also have permissions for thekms:GenerateDataKey
action for theCreateMultipartUpload
API. Then, the requester needs permissions for thekms:Decrypt
action on theUploadPart
andUploadPartCopy
APIs. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information about KMS permissions, see Protecting data using server-side encryption with KMS in the Amazon S3 User Guide. For information about the permissions required to use the multipart upload API, see Multipart upload and permissions and Multipart upload API and permissions in the Amazon S3 User Guide.Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the CreateSession API operation for session-based authorization. Specifically, you grant the
s3express:CreateSession
permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make theCreateSession
API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make anotherCreateSession
API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see CreateSession. If the object is encrypted with SSE-KMS, you must also have thekms:GenerateDataKey
andkms:Decrypt
permissions in IAM identity-based policies and KMS key policies for the KMS key.Data integrity
General purpose bucket - To ensure that data is not corrupted traversing the network, specify the
Content-MD5
header in the upload part request. Amazon S3 checks the part data against the provided MD5 value. If they do not match, Amazon S3 returns an error. If the upload request is signed with Signature Version 4, then Amazon Web Services S3 uses thex-amz-content-sha256
header as a checksum instead ofContent-MD5
. For more information see Authenticating Requests: Using the Authorization Header (Amazon Web Services Signature Version 4).Note
Directory buckets - MD5 is not supported by directory buckets. You can use checksum algorithms to check object integrity.
Encryption
General purpose bucket - Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You have mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS), and Customer-Provided Keys (SSE-C). Amazon S3 encrypts data with server-side encryption using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption with other key options. The option you use depends on whether you want to use KMS keys (SSE-KMS) or provide your own encryption key (SSE-C). Server-side encryption is supported by the S3 Multipart Upload operations. Unless you are using a customer-provided encryption key (SSE-C), you don’t need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see CreateMultipartUpload. If you request server-side encryption using a customer-provided encryption key (SSE-C) in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following request headers.
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
For more information, see Using Server-Side Encryption in the Amazon S3 User Guide.
Directory buckets - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (
AES256
) and server-side encryption with KMS keys (SSE-KMS) (aws:kms
).Special errors
Error Code:
NoSuchUpload
Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
HTTP Host header syntax
Directory buckets - The HTTP Host header syntax is
Bucket_name.s3express-az_id.region.amazonaws.com
.The following operations are related to
UploadPart
:See also: AWS API Documentation
Request Syntax
response = multipart_upload_part.upload( Body=b'bytes'|file, ContentLength=123, ContentMD5='string', ChecksumAlgorithm='CRC32'|'CRC32C'|'SHA1'|'SHA256', ChecksumCRC32='string', ChecksumCRC32C='string', ChecksumSHA1='string', ChecksumSHA256='string', SSECustomerAlgorithm='string', SSECustomerKey='string', RequestPayer='requester', ExpectedBucketOwner='string' )
- Parameters:
Body (bytes or seekable file-like object) – Object data.
ContentLength (integer) – Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.
ContentMD5 (string) –
The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.
Note
This functionality is not supported for directory buckets.
ChecksumAlgorithm (string) –
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don’t use the SDK. When you send this header, there must be a corresponding
x-amz-checksum
orx-amz-trailer
header sent. Otherwise, Amazon S3 fails the request with the HTTP status code400 Bad Request
. For more information, see Checking object integrity in the Amazon S3 User Guide.If you provide an individual checksum, Amazon S3 ignores any provided
ChecksumAlgorithm
parameter.This checksum algorithm must be the same for all parts and it match the checksum value supplied in the
CreateMultipartUpload
request.ChecksumCRC32 (string) – This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
ChecksumCRC32C (string) – This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
ChecksumSHA1 (string) – This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
ChecksumSHA256 (string) – This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
SSECustomerAlgorithm (string) –
Specifies the algorithm to use when encrypting the object (for example, AES256).
Note
This functionality is not supported for directory buckets.
SSECustomerKey (string) –
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the
x-amz-server-side-encryption-customer-algorithm header
. This must be the same encryption key specified in the initiate multipart upload request.Note
This functionality is not supported for directory buckets.
SSECustomerKeyMD5 (string) –
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
Note
This functionality is not supported for directory buckets.
Please note that this parameter is automatically populated if it is not provided. Including this parameter is not required
RequestPayer (string) –
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
Note
This functionality is not supported for directory buckets.
ExpectedBucketOwner (string) – The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code
403 Forbidden
(access denied).
- Return type:
dict
- Returns:
Response Syntax
{ 'ServerSideEncryption': 'AES256'|'aws:kms'|'aws:kms:dsse', 'ETag': 'string', 'ChecksumCRC32': 'string', 'ChecksumCRC32C': 'string', 'ChecksumSHA1': 'string', 'ChecksumSHA256': 'string', 'SSECustomerAlgorithm': 'string', 'SSECustomerKeyMD5': 'string', 'SSEKMSKeyId': 'string', 'BucketKeyEnabled': True|False, 'RequestCharged': 'requester' }
Response Structure
(dict) –
ServerSideEncryption (string) –
The server-side encryption algorithm used when you store this object in Amazon S3 (for example,
AES256
,aws:kms
).ETag (string) –
Entity tag for the uploaded object.
ChecksumCRC32 (string) –
The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it’s a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
ChecksumCRC32C (string) –
The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it’s a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
ChecksumSHA1 (string) –
The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it’s a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
ChecksumSHA256 (string) –
The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it’s a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
SSECustomerAlgorithm (string) –
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that’s used.
Note
This functionality is not supported for directory buckets.
SSECustomerKeyMD5 (string) –
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.
Note
This functionality is not supported for directory buckets.
SSEKMSKeyId (string) –
If present, indicates the ID of the KMS key that was used for object encryption.
BucketKeyEnabled (boolean) –
Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
RequestCharged (string) –
If present, indicates that the requester was successfully charged for the request.
Note
This functionality is not supported for directory buckets.