IVS / Client / create_recording_configuration

create_recording_configuration#

IVS.Client.create_recording_configuration(**kwargs)#

Creates a new recording configuration, used to enable recording to Amazon S3.

Known issue: In the us-east-1 region, if you use the Amazon Web Services CLI to create a recording configuration, it returns success even if the S3 bucket is in a different region. In this case, the state of the recording configuration is CREATE_FAILED (instead of ACTIVE). (In other regions, the CLI correctly returns failure if the bucket is in a different region.)

Workaround: Ensure that your S3 bucket is in the same region as the recording configuration. If you create a recording configuration in a different region as your S3 bucket, delete that recording configuration and create a new one with an S3 bucket from the correct region.

Request Syntax

response = client.create_recording_configuration(
    destinationConfiguration={
        's3': {
            'bucketName': 'string'
        }
    },
    name='string',
    recordingReconnectWindowSeconds=123,
    renditionConfiguration={
        'renditionSelection': 'ALL'|'NONE'|'CUSTOM',
        'renditions': [
            'SD'|'HD'|'FULL_HD'|'LOWEST_RESOLUTION',
        ]
    },
    tags={
        'string': 'string'
    },
    thumbnailConfiguration={
        'recordingMode': 'DISABLED'|'INTERVAL',
        'resolution': 'SD'|'HD'|'FULL_HD'|'LOWEST_RESOLUTION',
        'storage': [
            'SEQUENTIAL'|'LATEST',
        ],
        'targetIntervalSeconds': 123
    }
)

Parameters:

destinationConfiguration (dict) –
[REQUIRED]

A complex type that contains a destination configuration for where recorded video will be stored.
- s3 (dict) –
  
  An S3 destination configuration where recorded videos will be stored.
  - bucketName (string) – [REQUIRED]
    
    Location (S3 bucket name) where recorded videos will be stored.
name (string) – Recording-configuration name. The value does not need to be unique.
recordingReconnectWindowSeconds (integer) – If a broadcast disconnects and then reconnects within the specified interval, the multiple streams will be considered a single broadcast and merged together. Default: 0.
renditionConfiguration (dict) –
Object that describes which renditions should be recorded for a stream.
- renditionSelection (string) –
  
  Indicates which set of renditions are recorded for a stream. For BASIC channels, the CUSTOM value has no effect. If CUSTOM is specified, a set of renditions must be specified in the renditions field. Default: ALL.
- renditions (list) –
  
  Indicates which renditions are recorded for a stream, if renditionSelection is CUSTOM; otherwise, this field is irrelevant. The selected renditions are recorded if they are available during the stream. If a selected rendition is unavailable, the best available rendition is recorded. For details on the resolution dimensions of each rendition, see Auto-Record to Amazon S3.
  - (string) –
tags (dict) –
Array of 1-50 maps, each of the form string:string (key:value). See Best practices and strategies in Tagging Amazon Web Services Resources and Tag Editor for details, including restrictions that apply to tags and “Tag naming limits and requirements”; Amazon IVS has no service-specific constraints beyond what is documented there.
- (string) –
  - (string) –
thumbnailConfiguration (dict) –
A complex type that allows you to enable/disable the recording of thumbnails for a live session and modify the interval at which thumbnails are generated for the live session.
- recordingMode (string) –
  
  Thumbnail recording mode. Default: INTERVAL.
- resolution (string) –
  
  Indicates the desired resolution of recorded thumbnails. Thumbnails are recorded at the selected resolution if the corresponding rendition is available during the stream; otherwise, they are recorded at source resolution. For more information about resolution values and their corresponding height and width dimensions, see Auto-Record to Amazon S3. Default: Null (source resolution is returned).
- storage (list) –
  
  Indicates the format in which thumbnails are recorded. SEQUENTIAL records all generated thumbnails in a serial manner, to the media/thumbnails directory. LATEST saves the latest thumbnail in media/latest_thumbnail/thumb.jpg and overwrites it at the interval specified by targetIntervalSeconds. You can enable both SEQUENTIAL and LATEST. Default: SEQUENTIAL.
  - (string) –
- targetIntervalSeconds (integer) –
  
  The targeted thumbnail-generation interval in seconds. This is configurable (and required) only if recordingMode is INTERVAL. Default: 60.
  
  Important: For the BASIC channel type, setting a value for targetIntervalSeconds does not guarantee that thumbnails are generated at the specified interval. For thumbnails to be generated at the targetIntervalSeconds interval, the IDR/Keyframe value for the input video must be less than the targetIntervalSeconds value. See Amazon IVS Streaming Configuration for information on setting IDR/Keyframe to the recommended value in video-encoder settings.

Return type:

dict

Returns:

Response Syntax

{
    'recordingConfiguration': {
        'arn': 'string',
        'destinationConfiguration': {
            's3': {
                'bucketName': 'string'
            }
        },
        'name': 'string',
        'recordingReconnectWindowSeconds': 123,
        'renditionConfiguration': {
            'renditionSelection': 'ALL'|'NONE'|'CUSTOM',
            'renditions': [
                'SD'|'HD'|'FULL_HD'|'LOWEST_RESOLUTION',
            ]
        },
        'state': 'CREATING'|'CREATE_FAILED'|'ACTIVE',
        'tags': {
            'string': 'string'
        },
        'thumbnailConfiguration': {
            'recordingMode': 'DISABLED'|'INTERVAL',
            'resolution': 'SD'|'HD'|'FULL_HD'|'LOWEST_RESOLUTION',
            'storage': [
                'SEQUENTIAL'|'LATEST',
            ],
            'targetIntervalSeconds': 123
        }
    }
}

Response Structure

(dict) –
- recordingConfiguration (dict) –
  - arn (string) –
    
    Recording-configuration ARN.
  - destinationConfiguration (dict) –
    
    A complex type that contains information about where recorded video will be stored.
    - s3 (dict) –
      
      An S3 destination configuration where recorded videos will be stored.
      - bucketName (string) –
        
        Location (S3 bucket name) where recorded videos will be stored.
  - name (string) –
    
    Recording-configuration name. The value does not need to be unique.
  - recordingReconnectWindowSeconds (integer) –
    
    If a broadcast disconnects and then reconnects within the specified interval, the multiple streams will be considered a single broadcast and merged together. Default: 0.
  - renditionConfiguration (dict) –
    
    Object that describes which renditions should be recorded for a stream.
    - renditionSelection (string) –
      
      Indicates which set of renditions are recorded for a stream. For BASIC channels, the CUSTOM value has no effect. If CUSTOM is specified, a set of renditions must be specified in the renditions field. Default: ALL.
    - renditions (list) –
      
      Indicates which renditions are recorded for a stream, if renditionSelection is CUSTOM; otherwise, this field is irrelevant. The selected renditions are recorded if they are available during the stream. If a selected rendition is unavailable, the best available rendition is recorded. For details on the resolution dimensions of each rendition, see Auto-Record to Amazon S3.
      - (string) –
  - state (string) –
    
    Indicates the current state of the recording configuration. When the state is ACTIVE, the configuration is ready for recording a channel stream.
  - tags (dict) –
    
    Tags attached to the resource. Array of 1-50 maps, each of the form string:string (key:value). See Best practices and strategies in Tagging Amazon Web Services Resources and Tag Editor for details, including restrictions that apply to tags and “Tag naming limits and requirements”; Amazon IVS has no service-specific constraints beyond what is documented there.
    - (string) –
      - (string) –
  - thumbnailConfiguration (dict) –
    
    A complex type that allows you to enable/disable the recording of thumbnails for a live session and modify the interval at which thumbnails are generated for the live session.
    - recordingMode (string) –
      
      Thumbnail recording mode. Default: INTERVAL.
    - resolution (string) –
      
      Indicates the desired resolution of recorded thumbnails. Thumbnails are recorded at the selected resolution if the corresponding rendition is available during the stream; otherwise, they are recorded at source resolution. For more information about resolution values and their corresponding height and width dimensions, see Auto-Record to Amazon S3. Default: Null (source resolution is returned).
    - storage (list) –
      
      Indicates the format in which thumbnails are recorded. SEQUENTIAL records all generated thumbnails in a serial manner, to the media/thumbnails directory. LATEST saves the latest thumbnail in media/latest_thumbnail/thumb.jpg and overwrites it at the interval specified by targetIntervalSeconds. You can enable both SEQUENTIAL and LATEST. Default: SEQUENTIAL.
      - (string) –
    - targetIntervalSeconds (integer) –
      
      The targeted thumbnail-generation interval in seconds. This is configurable (and required) only if recordingMode is INTERVAL. Default: 60.
      
      Important: For the BASIC channel type, setting a value for targetIntervalSeconds does not guarantee that thumbnails are generated at the specified interval. For thumbnails to be generated at the targetIntervalSeconds interval, the IDR/Keyframe value for the input video must be less than the targetIntervalSeconds value. See Amazon IVS Streaming Configuration for information on setting IDR/Keyframe to the recommended value in video-encoder settings.

Exceptions

IVS.Client.exceptions.InternalServerException
IVS.Client.exceptions.AccessDeniedException
IVS.Client.exceptions.ValidationException
IVS.Client.exceptions.PendingVerification
IVS.Client.exceptions.ConflictException
IVS.Client.exceptions.ServiceQuotaExceededException