MultipartUpload / Action / complete

complete#

S3.MultipartUpload.complete(**kwargs)#

Completes a multipart upload by assembling previously uploaded parts.

You first initiate the multipart upload and then upload all parts using the UploadPart operation or the UploadPartCopy operation. After successfully uploading all relevant parts of an upload, you call this CompleteMultipartUpload operation to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the CompleteMultipartUpload request, you must provide the parts list and ensure that the parts list is complete. The CompleteMultipartUpload API operation concatenates the parts that you provide in the list. For each part in the list, you must provide the PartNumber value and the ETag value that are returned after that part was uploaded.

The processing of a CompleteMultipartUpload request could take several minutes to finalize. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. A request could fail after the initial 200 OK response has been sent. This means that a 200 OK response can contain either a success or an error. The error response might be embedded in the 200 OK response. If you call this API operation directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throw an exception (or, for the SDKs that don’t use exceptions, they return an error).

Note that if CompleteMultipartUpload fails, applications should be prepared to retry any failed requests (including 500 error responses). For more information, see Amazon S3 Error Best Practices.

Warning

You can’t use Content-Type: application/x-www-form-urlencoded for the CompleteMultipartUpload requests. Also, if you don’t provide a Content-Type header, CompleteMultipartUpload can still return a 200 OK response.

For more information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon S3 User Guide.

Note

Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format ``https://bucket_name.s3express-az_id.region.amazonaws.com/key-name ``. Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.

Permissions

  • General purpose bucket permissions - For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions in the Amazon S3 User Guide.

  • Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the CreateSession API operation for session-based authorization. Specifically, you grant the s3express:CreateSession permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the CreateSession API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another CreateSession API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see CreateSession.

  • If you provide an additional checksum value in your MultipartUpload requests and the object is encrypted with Key Management Service, you must have permission to use the kms:Decrypt action for the CompleteMultipartUpload request to succeed.

    Special errors

  • Error Code: EntityTooSmall

    • Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.

    • HTTP Status Code: 400 Bad Request

  • Error Code: InvalidPart

    • Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified ETag might not have matched the uploaded part’s ETag.

    • HTTP Status Code: 400 Bad Request

  • Error Code: InvalidPartOrder

    • Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.

    • HTTP Status Code: 400 Bad Request

  • Error Code: NoSuchUpload

    • Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.

    • HTTP Status Code: 404 Not Found

    HTTP Host header syntax

Directory buckets - The HTTP Host header syntax is Bucket_name.s3express-az_id.region.amazonaws.com.

The following operations are related to CompleteMultipartUpload:

See also: AWS API Documentation

Request Syntax

object = multipart_upload.complete(
    MultipartUpload={
        'Parts': [
            {
                'ETag': 'string',
                'ChecksumCRC32': 'string',
                'ChecksumCRC32C': 'string',
                'ChecksumSHA1': 'string',
                'ChecksumSHA256': 'string',
                'PartNumber': 123
            },
        ]
    },
    ChecksumCRC32='string',
    ChecksumCRC32C='string',
    ChecksumSHA1='string',
    ChecksumSHA256='string',
    RequestPayer='requester',
    ExpectedBucketOwner='string',
    IfNoneMatch='string',
    SSECustomerAlgorithm='string',
    SSECustomerKey='string',

)
Parameters:

  • MultipartUpload (dict) –

    The container for the multipart upload request information.

    • Parts (list) –

      Array of CompletedPart data types.

      If you do not supply a valid Part with your request, the service sends back an HTTP 400 response.

      • (dict) –

        Details of the parts that were uploaded.

        • ETag (string) –

          Entity tag returned when the part was uploaded.

        • ChecksumCRC32 (string) –

          The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it’s a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

        • ChecksumCRC32C (string) –

          The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it’s a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

        • ChecksumSHA1 (string) –

          The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. When you use the API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it’s a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

        • ChecksumSHA256 (string) –

          The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. When you use an API operation on an object that was uploaded using multipart uploads, this value may not be a direct checksum value of the full object. Instead, it’s a calculation based on the checksum values of each individual part. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

        • PartNumber (integer) –

          Part number that identifies the part. This is a positive integer between 1 and 10,000.

          Note

          • General purpose buckets - In CompleteMultipartUpload, when a additional checksum (including x-amz-checksum-crc32, x-amz-checksum-crc32c, x-amz-checksum-sha1, or x-amz-checksum-sha256) is applied to each part, the PartNumber must start at 1 and the part numbers must be consecutive. Otherwise, Amazon S3 generates an HTTP 400 Bad Request status code and an InvalidPartOrder error code.

          • Directory buckets - In CompleteMultipartUpload, the PartNumber must start at 1 and the part numbers must be consecutive.

  • ChecksumCRC32 (string) – This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

  • ChecksumCRC32C (string) – This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

  • ChecksumSHA1 (string) – This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

  • ChecksumSHA256 (string) – This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

  • RequestPayer (string) –

    Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

    Note

    This functionality is not supported for directory buckets.

  • ExpectedBucketOwner (string) – The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

  • IfNoneMatch (string) –

    Uploads the object only if the object key name does not already exist in the bucket specified. Otherwise, Amazon S3 returns a 412 Precondition Failed error.

    If a conflicting operation occurs during the upload S3 returns a 409 ConditionalRequestConflict response. On a 409 failure you should re-initiate the multipart upload with CreateMultipartUpload and re-upload each part.

    Expects the ‘*’ (asterisk) character.

    For more information about conditional requests, see RFC 7232, or Conditional requests in the Amazon S3 User Guide.

  • SSECustomerAlgorithm (string) –

    The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is required only when the object was created using a checksum algorithm or if your bucket policy requires the use of SSE-C. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

    Note

    This functionality is not supported for directory buckets.

  • SSECustomerKey (string) –

    The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

    Note

    This functionality is not supported for directory buckets.

  • SSECustomerKeyMD5 (string) –

    The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see Protecting data using SSE-C keys in the Amazon S3 User Guide.

    Note

    This functionality is not supported for directory buckets.

    Please note that this parameter is automatically populated if it is not provided. Including this parameter is not required

Return type:

s3.Object

Returns:

Object resource