Table of Contents
A low-level client representing AWS Secrets Manager:
import boto3
client = boto3.client('secretsmanager')
These are the available methods:
Check if an operation can be paginated.
Disables automatic scheduled rotation and cancels the rotation of a secret if one is currently in progress.
To re-enable scheduled rotation, call RotateSecret with AutomaticallyRotateAfterDays set to a value greater than 0. This will immediately rotate your secret and then enable the automatic schedule.
Note
If you cancel a rotation that is in progress, it can leave the VersionStage labels in an unexpected state. Depending on what step of the rotation was in progress, you might need to remove the staging label AWSPENDING from the partially created version, specified by the VersionId response value. You should also evaluate the partially rotated new version to see if it should be deleted, which you can do by removing all staging labels from the new version's VersionStage field.
To successfully start a rotation, the staging label AWSPENDING must be in one of the following states:
If the staging label AWSPENDING is attached to a different version than the version with AWSCURRENT then the attempt to rotate fails.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.cancel_rotate_secret(
SecretId='string'
)
[REQUIRED]
Specifies the secret for which you want to cancel a rotation request. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
{
'ARN': 'string',
'Name': 'string',
'VersionId': 'string'
}
Response Structure
The ARN of the secret for which rotation was canceled.
The friendly name of the secret for which rotation was canceled.
The unique identifier of the version of the secret that was created during the rotation. This version might not be complete, and should be evaluated for possible deletion. At the very least, you should remove the VersionStage value AWSPENDING to enable this version to be deleted. Failing to clean up a cancelled rotation can block you from successfully starting future rotations.
Creates a new secret. A secret in Secrets Manager consists of both the protected secret data and the important information needed to manage the secret.
Secrets Manager stores the encrypted secret data in one of a collection of "versions" associated with the secret. Each version contains a copy of the encrypted secret data. Each version is associated with one or more "staging labels" that identify where the version is in the rotation cycle. The SecretVersionsToStages field of the secret contains the mapping of staging labels to the active versions of the secret. Versions without a staging label are considered deprecated and are not included in the list.
You provide the secret data to be encrypted by putting text in either the SecretString parameter or binary data in the SecretBinary parameter, but not both. If you include SecretString or SecretBinary then Secrets Manager also creates an initial secret version and automatically attaches the staging label AWSCURRENT to the new version.
Note
- If you call an operation that needs to encrypt or decrypt the SecretString or SecretBinary for a secret in the same account as the calling user and that secret doesn't specify a AWS KMS encryption key, Secrets Manager uses the account's default AWS managed customer master key (CMK) with the alias aws/secretsmanager . If this key doesn't already exist in your account then Secrets Manager creates it for you automatically. All users and roles in the same AWS account automatically have access to use the default CMK. Note that if an Secrets Manager API call results in AWS having to create the account's AWS-managed CMK, it can result in a one-time significant delay in returning the result.
- If the secret is in a different AWS account from the credentials calling an API that requires encryption or decryption of the secret value then you must create and use a custom AWS KMS CMK because you can't access the default CMK for the account using credentials from a different AWS account. Store the ARN of the CMK in the secret when you create the secret or when you update it by including it in the KMSKeyId . If you call an API that must encrypt or decrypt SecretString or SecretBinary using credentials from a different account then the AWS KMS key policy must grant cross-account access to that other account's user or role for both the kms:GenerateDataKey and kms:Decrypt operations.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.create_secret(
Name='string',
ClientRequestToken='string',
Description='string',
KmsKeyId='string',
SecretBinary=b'bytes',
SecretString='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
Specifies the friendly name of the new secret.
The secret name must be ASCII letters, digits, or the following characters : /_+=.@-
Note
Don't end your secret name with a hyphen followed by six characters. If you do so, you risk confusion and unexpected results when searching for a secret by partial ARN. This is because Secrets Manager automatically adds a hyphen and six random characters at the end of the ARN.
(Optional) If you include SecretString or SecretBinary , then an initial version is created as part of the secret, and this parameter specifies a unique identifier for the new version.
Note
If you use the AWS CLI or one of the AWS SDK to call this operation, then you can leave this parameter empty. The CLI or SDK generates a random UUID for you and includes it as the value for this parameter in the request. If you don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a ClientRequestToken yourself for the new version and include that value in the request.
This value helps ensure idempotency. Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during a rotation. We recommend that you generate a UUID-type value to ensure uniqueness of your versions within the specified secret.
This value becomes the VersionId of the new version.
This field is autopopulated if not provided.
(Optional) Specifies the ARN, Key ID, or alias of the AWS KMS customer master key (CMK) to be used to encrypt the SecretString or SecretBinary values in the versions stored in this secret.
You can specify any of the supported ways to identify a AWS KMS key ID. If you need to reference a CMK in a different account, you can use only the key ARN or the alias ARN.
If you don't specify this value, then Secrets Manager defaults to using the AWS account's default CMK (the one named aws/secretsmanager ). If a AWS KMS CMK with that name doesn't yet exist, then Secrets Manager creates it for you automatically the first time it needs to encrypt a version's SecretString or SecretBinary fields.
Warning
You can use the account's default CMK to encrypt and decrypt only if you call this operation using credentials from the same account that owns the secret. If the secret is in a different account, then you must create a custom CMK and specify the ARN in this field.
(Optional) Specifies binary data that you want to encrypt and store in the new version of the secret. To use this parameter in the command-line tools, we recommend that you store your binary data in a file and then use the appropriate technique for your tool to pass the contents of the file as a parameter.
Either SecretString or SecretBinary must have a value, but not both. They cannot both be empty.
This parameter is not available using the Secrets Manager console. It can be accessed only by using the AWS CLI or one of the AWS SDKs.
(Optional) Specifies text data that you want to encrypt and store in this new version of the secret.
Either SecretString or SecretBinary must have a value, but not both. They cannot both be empty.
If you create a secret by using the Secrets Manager console then Secrets Manager puts the protected secret text in only the SecretString parameter. The Secrets Manager console stores the information as a JSON structure of key/value pairs that the Lambda rotation function knows how to parse.
For storing multiple values, we recommend that you use a JSON text string argument and specify key/value pairs. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide . For example:
[{"username":"bob"},{"password":"abc123xyz456"}]
If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text.
(Optional) Specifies a list of user-defined tags that are attached to the secret. Each tag is a "Key" and "Value" pair of strings. This operation only appends tags to the existing list of tags. To remove tags, you must use UntagResource .
Warning
This parameter requires a JSON text string argument. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide . For example:
[{"Key":"CostCenter","Value":"12345"},{"Key":"environment","Value":"production"}]
If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text.
The following basic restrictions apply to tags:
A structure that contains information about a tag.
The key identifier, or name, of the tag.
The string value that's associated with the key of the tag.
dict
Response Syntax
{
'ARN': 'string',
'Name': 'string',
'VersionId': 'string'
}
Response Structure
(dict) --
ARN (string) --
The Amazon Resource Name (ARN) of the secret that you just created.
Note
Secrets Manager automatically adds several random characters to the name at the end of the ARN when you initially create a secret. This affects only the ARN and not the actual friendly name. This ensures that if you create a new secret with the same name as an old secret that you previously deleted, then users with access to the old secret don't automatically get access to the new secret because the ARNs are different.
Name (string) --
The friendly name of the secret that you just created.
VersionId (string) --
The unique identifier that's associated with the version of the secret you just created.
Deletes the resource-based permission policy that's attached to the secret.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.delete_resource_policy(
SecretId='string'
)
[REQUIRED]
Specifies the secret that you want to delete the attached resource-based policy for. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
{
'ARN': 'string',
'Name': 'string'
}
Response Structure
The ARN of the secret that the resource-based policy was deleted for.
The friendly name of the secret that the resource-based policy was deleted for.
Deletes an entire secret and all of its versions. You can optionally include a recovery window during which you can restore the secret. If you don't specify a recovery window value, the operation defaults to 30 days. Secrets Manager attaches a DeletionDate stamp to the secret that specifies the end of the recovery window. At the end of the recovery window, Secrets Manager deletes the secret permanently.
At any time before recovery window ends, you can use RestoreSecret to remove the DeletionDate and cancel the deletion of the secret.
You cannot access the encrypted secret information in any secret that is scheduled for deletion. If you need to access that information, you must cancel the deletion with RestoreSecret and then retrieve the information.
Note
- There is no explicit operation to delete a version of a secret. Instead, remove all staging labels from the VersionStage field of a version. That marks the version as deprecated and allows Secrets Manager to delete it as needed. Versions that do not have any staging labels do not show up in ListSecretVersionIds unless you specify IncludeDeprecated .
- The permanent secret deletion at the end of the waiting period is performed as a background task with low priority. There is no guarantee of a specific time after the recovery window for the actual delete operation to occur.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.delete_secret(
SecretId='string',
RecoveryWindowInDays=123,
ForceDeleteWithoutRecovery=True|False
)
[REQUIRED]
Specifies the secret that you want to delete. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
(Optional) Specifies the number of days that Secrets Manager waits before it can delete the secret. You can't use both this parameter and the ForceDeleteWithoutRecovery parameter in the same API call.
This value can range from 7 to 30 days. The default value is 30.
(Optional) Specifies that the secret is to be deleted without any recovery window. You can't use both this parameter and the RecoveryWindowInDays parameter in the same API call.
An asynchronous background process performs the actual deletion, so there can be a short delay before the operation completes. If you write code to delete and then immediately recreate a secret with the same name, ensure that your code includes appropriate back off and retry logic.
Warning
Use this parameter with caution. This parameter causes the operation to skip the normal waiting period before the permanent deletion that AWS would normally impose with the RecoveryWindowInDays parameter. If you delete a secret with the ForceDeleteWithouRecovery parameter, then you have no opportunity to recover the secret. It is permanently lost.
dict
Response Syntax
{
'ARN': 'string',
'Name': 'string',
'DeletionDate': datetime(2015, 1, 1)
}
Response Structure
(dict) --
ARN (string) --
The ARN of the secret that is now scheduled for deletion.
Name (string) --
The friendly name of the secret that is now scheduled for deletion.
DeletionDate (datetime) --
The date and time after which this secret can be deleted by Secrets Manager and can no longer be restored. This value is the date and time of the delete request plus the number of days specified in RecoveryWindowInDays .
Retrieves the details of a secret. It does not include the encrypted fields. Only those fields that are populated with a value are returned in the response.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.describe_secret(
SecretId='string'
)
[REQUIRED]
The identifier of the secret whose details you want to retrieve. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
{
'ARN': 'string',
'Name': 'string',
'Description': 'string',
'KmsKeyId': 'string',
'RotationEnabled': True|False,
'RotationLambdaARN': 'string',
'RotationRules': {
'AutomaticallyAfterDays': 123
},
'LastRotatedDate': datetime(2015, 1, 1),
'LastChangedDate': datetime(2015, 1, 1),
'LastAccessedDate': datetime(2015, 1, 1),
'DeletedDate': datetime(2015, 1, 1),
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'VersionIdsToStages': {
'string': [
'string',
]
}
}
Response Structure
The ARN of the secret.
The user-provided friendly name of the secret.
The user-provided description of the secret.
The ARN or alias of the AWS KMS customer master key (CMK) that's used to encrypt the SecretString or SecretBinary fields in each version of the secret. If you don't provide a key, then Secrets Manager defaults to encrypting the secret fields with the default AWS KMS CMK (the one named awssecretsmanager ) for this account.
Specifies whether automatic rotation is enabled for this secret.
To enable rotation, use RotateSecret with AutomaticallyRotateAfterDays set to a value greater than 0. To disable rotation, use CancelRotateSecret .
The ARN of a Lambda function that's invoked by Secrets Manager to rotate the secret either automatically per the schedule or manually by a call to RotateSecret .
A structure that contains the rotation configuration for this secret.
Specifies the number of days between automatic scheduled rotations of the secret.
Secrets Manager schedules the next rotation when the previous one is complete. Secrets Manager schedules the date by adding the rotation interval (number of days) to the actual date of the last rotation. The service chooses the hour within that 24-hour date window randomly. The minute is also chosen somewhat randomly, but weighted towards the top of the hour and influenced by a variety of factors that help distribute load.
The most recent date and time that the Secrets Manager rotation process was successfully completed. This value is null if the secret has never rotated.
The last date and time that this secret was modified in any way.
The last date that this secret was accessed. This value is truncated to midnight of the date and therefore shows only the date, not the time.
This value exists if the secret is scheduled for deletion. Some time after the specified date and time, Secrets Manager deletes the secret and all of its versions.
If a secret is scheduled for deletion, then its details, including the encrypted secret information, is not accessible. To cancel a scheduled deletion and restore access, use RestoreSecret .
The list of user-defined tags that are associated with the secret. To add tags to a secret, use TagResource . To remove tags, use UntagResource .
A structure that contains information about a tag.
The key identifier, or name, of the tag.
The string value that's associated with the key of the tag.
A list of all of the currently assigned VersionStage staging labels and the VersionId that each is attached to. Staging labels are used to keep track of the different versions during the rotation process.
Note
A version that does not have any staging labels attached is considered deprecated and subject to deletion. Such versions are not included in this list.
Generate a presigned url given a client, its method, and arguments
The presigned url
Create a paginator for an operation.
Generates a random password of the specified complexity. This operation is intended for use in the Lambda rotation function. Per best practice, we recommend that you specify the maximum length and include every character type that the system you are generating a password for can support.
Minimum permissions
To run this command, you must have the following permissions:
See also: AWS API Documentation
Request Syntax
response = client.get_random_password(
PasswordLength=123,
ExcludeCharacters='string',
ExcludeNumbers=True|False,
ExcludePunctuation=True|False,
ExcludeUppercase=True|False,
ExcludeLowercase=True|False,
IncludeSpace=True|False,
RequireEachIncludedType=True|False
)
Specifies that the generated password should not include punctuation characters. The default if you do not include this switch parameter is that punctuation characters can be included.
The following are the punctuation characters that can be included in the generated password if you don't explicitly exclude them with ExcludeCharacters or ExcludePunctuation :
! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
dict
Response Syntax
{
'RandomPassword': 'string'
}
Response Structure
(dict) --
RandomPassword (string) --
A string with the generated password.
Retrieves the JSON text of the resource-based policy document that's attached to the specified secret. The JSON request string input and response output are shown formatted with white space and line breaks for better readability. Submit your input as a single line JSON string.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.get_resource_policy(
SecretId='string'
)
[REQUIRED]
Specifies the secret that you want to retrieve the attached resource-based policy for. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
{
'ARN': 'string',
'Name': 'string',
'ResourcePolicy': 'string'
}
Response Structure
The ARN of the secret that the resource-based policy was retrieved for.
The friendly name of the secret that the resource-based policy was retrieved for.
A JSON-formatted string that describes the permissions that are associated with the attached secret. These permissions are combined with any permissions that are associated with the user or role that attempts to access this secret. The combined permissions specify who can access the secret and what actions they can perform. For more information, see Authentication and Access Control for AWS Secrets Manager in the AWS Secrets Manager User Guide .
Retrieves the contents of the encrypted fields SecretString or SecretBinary from the specified version of a secret, whichever contains content.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.get_secret_value(
SecretId='string',
VersionId='string',
VersionStage='string'
)
[REQUIRED]
Specifies the secret containing the version that you want to retrieve. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
Specifies the unique identifier of the version of the secret that you want to retrieve. If you specify this parameter then don't specify VersionStage . If you don't specify either a VersionStage or VersionId then the default is to perform the operation on the version with the VersionStage value of AWSCURRENT .
This value is typically a UUID-type value with 32 hexadecimal digits.
Specifies the secret version that you want to retrieve by the staging label attached to the version.
Staging labels are used to keep track of different versions during the rotation process. If you use this parameter then don't specify VersionId . If you don't specify either a VersionStage or VersionId , then the default is to perform the operation on the version with the VersionStage value of AWSCURRENT .
dict
Response Syntax
{
'ARN': 'string',
'Name': 'string',
'VersionId': 'string',
'SecretBinary': b'bytes',
'SecretString': 'string',
'VersionStages': [
'string',
],
'CreatedDate': datetime(2015, 1, 1)
}
Response Structure
(dict) --
ARN (string) --
The ARN of the secret.
Name (string) --
The friendly name of the secret.
VersionId (string) --
The unique identifier of this version of the secret.
SecretBinary (bytes) --
The decrypted part of the protected secret information that was originally provided as binary data in the form of a byte array. The response parameter represents the binary data as a base64-encoded string.
This parameter is not used if the secret is created by the Secrets Manager console.
If you store custom information in this field of the secret, then you must code your Lambda rotation function to parse and interpret whatever you store in the SecretString or SecretBinary fields.
SecretString (string) --
The decrypted part of the protected secret information that was originally provided as a string.
If you create this secret by using the Secrets Manager console then only the SecretString parameter contains data. Secrets Manager stores the information as a JSON structure of key/value pairs that the Lambda rotation function knows how to parse.
If you store custom information in the secret by using the CreateSecret , UpdateSecret , or PutSecretValue API operations instead of the Secrets Manager console, or by using the Other secret type in the console, then you must code your Lambda rotation function to parse and interpret those values.
VersionStages (list) --
A list of all of the staging labels currently attached to this version of the secret.
CreatedDate (datetime) --
The date and time that this version of the secret was created.
Returns an object that can wait for some condition.
Lists all of the versions attached to the specified secret. The output does not include the SecretString or SecretBinary fields. By default, the list includes only versions that have at least one staging label in VersionStage attached.
Note
Always check the NextToken response parameter when calling any of the List* operations. These operations can occasionally return an empty or shorter than expected list of results even when there are more results available. When this happens, the NextToken response parameter contains a value to pass to the next call to the same API to request the next part of the list.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.list_secret_version_ids(
SecretId='string',
MaxResults=123,
NextToken='string',
IncludeDeprecated=True|False
)
[REQUIRED]
The identifier for the secret containing the versions you want to list. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
dict
Response Syntax
{
'Versions': [
{
'VersionId': 'string',
'VersionStages': [
'string',
],
'LastAccessedDate': datetime(2015, 1, 1),
'CreatedDate': datetime(2015, 1, 1)
},
],
'NextToken': 'string',
'ARN': 'string',
'Name': 'string'
}
Response Structure
(dict) --
Versions (list) --
The list of the currently available versions of the specified secret.
(dict) --
A structure that contains information about one version of a secret.
VersionId (string) --
The unique version identifier of this version of the secret.
VersionStages (list) --
An array of staging labels that are currently associated with this version of the secret.
LastAccessedDate (datetime) --
The date that this version of the secret was last accessed. Note that the resolution of this field is at the date level and does not include the time.
CreatedDate (datetime) --
The date and time this version of the secret was created.
NextToken (string) --
If present in the response, this value indicates that there's more output available than what's included in the current response. This can occur even when the response includes no values at all, such as when you ask for a filtered view of a very long list. Use this value in the NextToken request parameter in a subsequent call to the operation to continue processing and get the next part of the output. You should repeat this until the NextToken response element comes back empty (as null ).
ARN (string) --
The Amazon Resource Name (ARN) for the secret.
Note
Secrets Manager automatically adds several random characters to the name at the end of the ARN when you initially create a secret. This affects only the ARN and not the actual friendly name. This ensures that if you create a new secret with the same name as an old secret that you previously deleted, then users with access to the old secret don't automatically get access to the new secret because the ARNs are different.
Name (string) --
The friendly name of the secret.
Lists all of the secrets that are stored by Secrets Manager in the AWS account. To list the versions currently stored for a specific secret, use ListSecretVersionIds . The encrypted fields SecretString and SecretBinary are not included in the output. To get that information, call the GetSecretValue operation.
Note
Always check the NextToken response parameter when calling any of the List* operations. These operations can occasionally return an empty or shorter than expected list of results even when there are more results available. When this happens, the NextToken response parameter contains a value to pass to the next call to the same API to request the next part of the list.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.list_secrets(
MaxResults=123,
NextToken='string'
)
dict
Response Syntax
{
'SecretList': [
{
'ARN': 'string',
'Name': 'string',
'Description': 'string',
'KmsKeyId': 'string',
'RotationEnabled': True|False,
'RotationLambdaARN': 'string',
'RotationRules': {
'AutomaticallyAfterDays': 123
},
'LastRotatedDate': datetime(2015, 1, 1),
'LastChangedDate': datetime(2015, 1, 1),
'LastAccessedDate': datetime(2015, 1, 1),
'DeletedDate': datetime(2015, 1, 1),
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'SecretVersionsToStages': {
'string': [
'string',
]
}
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
SecretList (list) --
A list of the secrets in the account.
(dict) --
A structure that contains the details about a secret. It does not include the encrypted SecretString and SecretBinary values. To get those values, use the GetSecretValue operation.
ARN (string) --
The Amazon Resource Name (ARN) of the secret.
For more information about ARNs in Secrets Manager, see Policy Resources in the AWS Secrets Manager User Guide .
Name (string) --
The friendly name of the secret. You can use forward slashes in the name to represent a path hierarchy. For example, /prod/databases/dbserver1 could represent the secret for a server named dbserver1 in the folder databases in the folder prod .
Description (string) --
The user-provided description of the secret.
KmsKeyId (string) --
The ARN or alias of the AWS KMS customer master key (CMK) that's used to encrypt the SecretString and SecretBinary fields in each version of the secret. If you don't provide a key, then Secrets Manager defaults to encrypting the secret fields with the default KMS CMK (the one named awssecretsmanager ) for this account.
RotationEnabled (boolean) --
Indicated whether automatic, scheduled rotation is enabled for this secret.
RotationLambdaARN (string) --
The ARN of an AWS Lambda function that's invoked by Secrets Manager to rotate and expire the secret either automatically per the schedule or manually by a call to RotateSecret .
RotationRules (dict) --
A structure that defines the rotation configuration for the secret.
AutomaticallyAfterDays (integer) --
Specifies the number of days between automatic scheduled rotations of the secret.
Secrets Manager schedules the next rotation when the previous one is complete. Secrets Manager schedules the date by adding the rotation interval (number of days) to the actual date of the last rotation. The service chooses the hour within that 24-hour date window randomly. The minute is also chosen somewhat randomly, but weighted towards the top of the hour and influenced by a variety of factors that help distribute load.
LastRotatedDate (datetime) --
The last date and time that the rotation process for this secret was invoked.
LastChangedDate (datetime) --
The last date and time that this secret was modified in any way.
LastAccessedDate (datetime) --
The last date that this secret was accessed. This value is truncated to midnight of the date and therefore shows only the date, not the time.
DeletedDate (datetime) --
The date and time on which this secret was deleted. Not present on active secrets. The secret can be recovered until the number of days in the recovery window has passed, as specified in the RecoveryWindowInDays parameter of the DeleteSecret operation.
Tags (list) --
The list of user-defined tags that are associated with the secret. To add tags to a secret, use TagResource . To remove tags, use UntagResource .
(dict) --
A structure that contains information about a tag.
Key (string) --
The key identifier, or name, of the tag.
Value (string) --
The string value that's associated with the key of the tag.
SecretVersionsToStages (dict) --
A list of all of the currently assigned SecretVersionStage staging labels and the SecretVersionId that each is attached to. Staging labels are used to keep track of the different versions during the rotation process.
Note
A version that does not have any SecretVersionStage is considered deprecated and subject to deletion. Such versions are not included in this list.
NextToken (string) --
If present in the response, this value indicates that there's more output available than what's included in the current response. This can occur even when the response includes no values at all, such as when you ask for a filtered view of a very long list. Use this value in the NextToken request parameter in a subsequent call to the operation to continue processing and get the next part of the output. You should repeat this until the NextToken response element comes back empty (as null ).
Attaches the contents of the specified resource-based permission policy to a secret. A resource-based policy is optional. Alternatively, you can use IAM identity-based policies that specify the secret's Amazon Resource Name (ARN) in the policy statement's Resources element. You can also use a combination of both identity-based and resource-based policies. The affected users and roles receive the permissions that are permitted by all of the relevant policies. For more information, see Using Resource-Based Policies for AWS Secrets Manager . For the complete description of the AWS policy syntax and grammar, see IAM JSON Policy Reference in the IAM User Guide .
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.put_resource_policy(
SecretId='string',
ResourcePolicy='string'
)
[REQUIRED]
Specifies the secret that you want to attach the resource-based policy to. You can specify either the ARN or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
[REQUIRED]
A JSON-formatted string that's constructed according to the grammar and syntax for an AWS resource-based policy. The policy in the string identifies who can access or manage this secret and its versions. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide .
dict
Response Syntax
{
'ARN': 'string',
'Name': 'string'
}
Response Structure
(dict) --
ARN (string) --
The ARN of the secret that the resource-based policy was retrieved for.
Name (string) --
The friendly name of the secret that the resource-based policy was retrieved for.
Stores a new encrypted secret value in the specified secret. To do this, the operation creates a new version and attaches it to the secret. The version can contain a new SecretString value or a new SecretBinary value. You can also specify the staging labels that are initially attached to the new version.
Note
The Secrets Manager console uses only the SecretString field. To add binary data to a secret with the SecretBinary field you must use the AWS CLI or one of the AWS SDKs.
Note
- If you call an operation that needs to encrypt or decrypt the SecretString or SecretBinary for a secret in the same account as the calling user and that secret doesn't specify a AWS KMS encryption key, Secrets Manager uses the account's default AWS managed customer master key (CMK) with the alias aws/secretsmanager . If this key doesn't already exist in your account then Secrets Manager creates it for you automatically. All users and roles in the same AWS account automatically have access to use the default CMK. Note that if an Secrets Manager API call results in AWS having to create the account's AWS-managed CMK, it can result in a one-time significant delay in returning the result.
- If the secret is in a different AWS account from the credentials calling an API that requires encryption or decryption of the secret value then you must create and use a custom AWS KMS CMK because you can't access the default CMK for the account using credentials from a different AWS account. Store the ARN of the CMK in the secret when you create the secret or when you update it by including it in the KMSKeyId . If you call an API that must encrypt or decrypt SecretString or SecretBinary using credentials from a different account then the AWS KMS key policy must grant cross-account access to that other account's user or role for both the kms:GenerateDataKey and kms:Decrypt operations.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.put_secret_value(
SecretId='string',
ClientRequestToken='string',
SecretBinary=b'bytes',
SecretString='string',
VersionStages=[
'string',
]
)
[REQUIRED]
Specifies the secret to which you want to add a new version. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret. The secret must already exist.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
(Optional) Specifies a unique identifier for the new version of the secret.
Note
If you use the AWS CLI or one of the AWS SDK to call this operation, then you can leave this parameter empty. The CLI or SDK generates a random UUID for you and includes that in the request. If you don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a ClientRequestToken yourself for new versions and include that value in the request.
This value helps ensure idempotency. Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during the Lambda rotation function's processing. We recommend that you generate a UUID-type value to ensure uniqueness within the specified secret.
This value becomes the VersionId of the new version.
This field is autopopulated if not provided.
(Optional) Specifies binary data that you want to encrypt and store in the new version of the secret. To use this parameter in the command-line tools, we recommend that you store your binary data in a file and then use the appropriate technique for your tool to pass the contents of the file as a parameter. Either SecretBinary or SecretString must have a value, but not both. They cannot both be empty.
This parameter is not accessible if the secret using the Secrets Manager console.
(Optional) Specifies text data that you want to encrypt and store in this new version of the secret. Either SecretString or SecretBinary must have a value, but not both. They cannot both be empty.
If you create this secret by using the Secrets Manager console then Secrets Manager puts the protected secret text in only the SecretString parameter. The Secrets Manager console stores the information as a JSON structure of key/value pairs that the default Lambda rotation function knows how to parse.
For storing multiple values, we recommend that you use a JSON text string argument and specify key/value pairs. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide .
For example:
[{"username":"bob"},{"password":"abc123xyz456"}]
If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text.
(Optional) Specifies a list of staging labels that are attached to this version of the secret. These staging labels are used to track the versions through the rotation process by the Lambda rotation function.
A staging label must be unique to a single version of the secret. If you specify a staging label that's already associated with a different version of the same secret then that staging label is automatically removed from the other version and attached to this version.
If you do not specify a value for VersionStages then Secrets Manager automatically moves the staging label AWSCURRENT to this new version.
dict
Response Syntax
{
'ARN': 'string',
'Name': 'string',
'VersionId': 'string',
'VersionStages': [
'string',
]
}
Response Structure
(dict) --
ARN (string) --
The Amazon Resource Name (ARN) for the secret for which you just created a version.
Name (string) --
The friendly name of the secret for which you just created or updated a version.
VersionId (string) --
The unique identifier of the version of the secret you just created or updated.
VersionStages (list) --
The list of staging labels that are currently attached to this version of the secret. Staging labels are used to track a version as it progresses through the secret rotation process.
Cancels the scheduled deletion of a secret by removing the DeletedDate time stamp. This makes the secret accessible to query once again.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.restore_secret(
SecretId='string'
)
[REQUIRED]
Specifies the secret that you want to restore from a previously scheduled deletion. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
{
'ARN': 'string',
'Name': 'string'
}
Response Structure
The ARN of the secret that was restored.
The friendly name of the secret that was restored.
Configures and starts the asynchronous process of rotating this secret. If you include the configuration parameters, the operation sets those values for the secret and then immediately starts a rotation. If you do not include the configuration parameters, the operation starts a rotation with the values already stored in the secret. After the rotation completes, the protected service and its clients all use the new version of the secret.
This required configuration information includes the ARN of an AWS Lambda function and the time between scheduled rotations. The Lambda rotation function creates a new version of the secret and creates or updates the credentials on the protected service to match. After testing the new credentials, the function marks the new secret with the staging label AWSCURRENT so that your clients all immediately begin to use the new version. For more information about rotating secrets and how to configure a Lambda function to rotate the secrets for your protected service, see Rotating Secrets in AWS Secrets Manager in the AWS Secrets Manager User Guide .
Secrets Manager schedules the next rotation when the previous one is complete. Secrets Manager schedules the date by adding the rotation interval (number of days) to the actual date of the last rotation. The service chooses the hour within that 24-hour date window randomly. The minute is also chosen somewhat randomly, but weighted towards the top of the hour and influenced by a variety of factors that help distribute load.
The rotation function must end with the versions of the secret in one of two states:
If instead the AWSPENDING staging label is present but is not attached to the same version as AWSCURRENT then any later invocation of RotateSecret assumes that a previous rotation request is still in progress and returns an error.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.rotate_secret(
SecretId='string',
ClientRequestToken='string',
RotationLambdaARN='string',
RotationRules={
'AutomaticallyAfterDays': 123
}
)
[REQUIRED]
Specifies the secret that you want to rotate. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
(Optional) Specifies a unique identifier for the new version of the secret that helps ensure idempotency.
If you use the AWS CLI or one of the AWS SDK to call this operation, then you can leave this parameter empty. The CLI or SDK generates a random UUID for you and includes that in the request for this parameter. If you don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a ClientRequestToken yourself for new versions and include that value in the request.
You only need to specify your own value if you are implementing your own retry logic and want to ensure that a given secret is not created twice. We recommend that you generate a UUID-type value to ensure uniqueness within the specified secret.
Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during the function's processing. This value becomes the VersionId of the new version.
This field is autopopulated if not provided.
A structure that defines the rotation configuration for this secret.
Specifies the number of days between automatic scheduled rotations of the secret.
Secrets Manager schedules the next rotation when the previous one is complete. Secrets Manager schedules the date by adding the rotation interval (number of days) to the actual date of the last rotation. The service chooses the hour within that 24-hour date window randomly. The minute is also chosen somewhat randomly, but weighted towards the top of the hour and influenced by a variety of factors that help distribute load.
dict
Response Syntax
{
'ARN': 'string',
'Name': 'string',
'VersionId': 'string'
}
Response Structure
(dict) --
ARN (string) --
The ARN of the secret.
Name (string) --
The friendly name of the secret.
VersionId (string) --
The ID of the new version of the secret created by the rotation started by this request.
Attaches one or more tags, each consisting of a key name and a value, to the specified secret. Tags are part of the secret's overall metadata, and are not associated with any specific version of the secret. This operation only appends tags to the existing list of tags. To remove tags, you must use UntagResource .
The following basic restrictions apply to tags:
Warning
If you use tags as part of your security strategy, then adding or removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.tag_resource(
SecretId='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The identifier for the secret that you want to attach tags to. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
[REQUIRED]
The tags to attach to the secret. Each element in the list consists of a Key and a Value .
This parameter to the API requires a JSON text string argument. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide . For the AWS CLI, you can also use the syntax: --Tags Key="Key1",Value="Value1",Key="Key2",Value="Value2"[,…]
A structure that contains information about a tag.
The key identifier, or name, of the tag.
The string value that's associated with the key of the tag.
None
Removes one or more tags from the specified secret.
This operation is idempotent. If a requested tag is not attached to the secret, no error is returned and the secret metadata is unchanged.
Warning
If you use tags as part of your security strategy, then removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.untag_resource(
SecretId='string',
TagKeys=[
'string',
]
)
[REQUIRED]
The identifier for the secret that you want to remove tags from. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
[REQUIRED]
A list of tag key names to remove from the secret. You don't specify the value. Both the key and its associated value are removed.
This parameter to the API requires a JSON text string argument. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide .
None
Modifies many of the details of the specified secret. If you include a ClientRequestToken and either SecretString or SecretBinary then it also creates a new version attached to the secret.
To modify the rotation configuration of a secret, use RotateSecret instead.
Note
The Secrets Manager console uses only the SecretString parameter and therefore limits you to encrypting and storing only a text string. To encrypt and store binary data as part of the version of a secret, you must use either the AWS CLI or one of the AWS SDKs.
Note
- If you call an operation that needs to encrypt or decrypt the SecretString or SecretBinary for a secret in the same account as the calling user and that secret doesn't specify a AWS KMS encryption key, Secrets Manager uses the account's default AWS managed customer master key (CMK) with the alias aws/secretsmanager . If this key doesn't already exist in your account then Secrets Manager creates it for you automatically. All users and roles in the same AWS account automatically have access to use the default CMK. Note that if an Secrets Manager API call results in AWS having to create the account's AWS-managed CMK, it can result in a one-time significant delay in returning the result.
- If the secret is in a different AWS account from the credentials calling an API that requires encryption or decryption of the secret value then you must create and use a custom AWS KMS CMK because you can't access the default CMK for the account using credentials from a different AWS account. Store the ARN of the CMK in the secret when you create the secret or when you update it by including it in the KMSKeyId . If you call an API that must encrypt or decrypt SecretString or SecretBinary using credentials from a different account then the AWS KMS key policy must grant cross-account access to that other account's user or role for both the kms:GenerateDataKey and kms:Decrypt operations.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.update_secret(
SecretId='string',
ClientRequestToken='string',
Description='string',
KmsKeyId='string',
SecretBinary=b'bytes',
SecretString='string'
)
[REQUIRED]
Specifies the secret that you want to modify or to which you want to add a new version. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
(Optional) If you want to add a new version to the secret, this parameter specifies a unique identifier for the new version that helps ensure idempotency.
If you use the AWS CLI or one of the AWS SDK to call this operation, then you can leave this parameter empty. The CLI or SDK generates a random UUID for you and includes that in the request. If you don't use the SDK and instead generate a raw HTTP request to the Secrets Manager service endpoint, then you must generate a ClientRequestToken yourself for new versions and include that value in the request.
You typically only need to interact with this value if you implement your own retry logic and want to ensure that a given secret is not created twice. We recommend that you generate a UUID-type value to ensure uniqueness within the specified secret.
Secrets Manager uses this value to prevent the accidental creation of duplicate versions if there are failures and retries during the Lambda rotation function's processing.
This value becomes the VersionId of the new version.
This field is autopopulated if not provided.
(Optional) Specifies an updated ARN or alias of the AWS KMS customer master key (CMK) to be used to encrypt the protected text in new versions of this secret.
Warning
You can only use the account's default CMK to encrypt and decrypt if you call this operation using credentials from the same account that owns the secret. If the secret is in a different account, then you must create a custom CMK and provide the ARN of that CMK in this field. The user making the call must have permissions to both the secret and the CMK in their respective accounts.
(Optional) Specifies updated binary data that you want to encrypt and store in the new version of the secret. To use this parameter in the command-line tools, we recommend that you store your binary data in a file and then use the appropriate technique for your tool to pass the contents of the file as a parameter. Either SecretBinary or SecretString must have a value, but not both. They cannot both be empty.
This parameter is not accessible using the Secrets Manager console.
(Optional) Specifies updated text data that you want to encrypt and store in this new version of the secret. Either SecretBinary or SecretString must have a value, but not both. They cannot both be empty.
If you create this secret by using the Secrets Manager console then Secrets Manager puts the protected secret text in only the SecretString parameter. The Secrets Manager console stores the information as a JSON structure of key/value pairs that the default Lambda rotation function knows how to parse.
For storing multiple values, we recommend that you use a JSON text string argument and specify key/value pairs. For information on how to format a JSON parameter for the various command line tool environments, see Using JSON for Parameters in the AWS CLI User Guide . For example:
[{"username":"bob"},{"password":"abc123xyz456"}]
If your command-line tool or SDK requires quotation marks around the parameter, you should use single quotes to avoid confusion with the double quotes required in the JSON text. You can also 'escape' the double quote character in the embedded JSON text by prefacing each with a backslash. For example, the following string is surrounded by double-quotes. All of the embedded double quotes are escaped:
"[{\"username\":\"bob\"},{\"password\":\"abc123xyz456\"}]"
dict
Response Syntax
{
'ARN': 'string',
'Name': 'string',
'VersionId': 'string'
}
Response Structure
(dict) --
ARN (string) --
The ARN of the secret that was updated.
Note
Secrets Manager automatically adds several random characters to the name at the end of the ARN when you initially create a secret. This affects only the ARN and not the actual friendly name. This ensures that if you create a new secret with the same name as an old secret that you previously deleted, then users with access to the old secret don't automatically get access to the new secret because the ARNs are different.
Name (string) --
The friendly name of the secret that was updated.
VersionId (string) --
If a new version of the secret was created by this operation, then VersionId contains the unique identifier of the new version.
Modifies the staging labels attached to a version of a secret. Staging labels are used to track a version as it progresses through the secret rotation process. You can attach a staging label to only one version of a secret at a time. If a staging label to be added is already attached to another version, then it is moved--removed from the other version first and then attached to this one. For more information about staging labels, see Staging Labels in the AWS Secrets Manager User Guide .
The staging labels that you specify in the VersionStage parameter are added to the existing list of staging labels--they don't replace it.
You can move the AWSCURRENT staging label to this version by including it in this call.
Note
Whenever you move AWSCURRENT , Secrets Manager automatically moves the label AWSPREVIOUS to the version that AWSCURRENT was removed from.
If this action results in the last label being removed from a version, then the version is considered to be 'deprecated' and can be deleted by Secrets Manager.
Minimum permissions
To run this command, you must have the following permissions:
Related operations
See also: AWS API Documentation
Request Syntax
response = client.update_secret_version_stage(
SecretId='string',
VersionStage='string',
RemoveFromVersionId='string',
MoveToVersionId='string'
)
[REQUIRED]
Specifies the secret with the version whose list of staging labels you want to modify. You can specify either the Amazon Resource Name (ARN) or the friendly name of the secret.
Note
If you specify an ARN, we generally recommend that you specify a complete ARN. You can specify a partial ARN too—for example, if you don’t include the final hyphen and six random characters that Secrets Manager adds at the end of the ARN when you created the secret. A partial ARN match can work as long as it uniquely matches only one secret. However, if your secret has a name that ends in a hyphen followed by six characters (before Secrets Manager adds the hyphen and six characters to the ARN) and you try to use that as a partial ARN, then those characters cause Secrets Manager to assume that you’re specifying a complete ARN. This confusion can cause unexpected results. To avoid this situation, we recommend that you don’t create secret names that end with a hyphen followed by six characters.
[REQUIRED]
The staging label to add to this version.
(Optional) The secret version ID that you want to add the staging label to. If you want to remove a label from a version, then do not specify this parameter.
If the staging label is already attached to a different version of the secret, then you must also specify the RemoveFromVersionId parameter.
dict
Response Syntax
{
'ARN': 'string',
'Name': 'string'
}
Response Structure
(dict) --
ARN (string) --
The ARN of the secret with the staging label that was modified.
Name (string) --
The friendly name of the secret with the staging label that was modified.
The available paginators are: