Table of Contents
A low-level client representing Amazon Elastic File System (EFS):
import boto3
client = boto3.client('efs')
These are the available methods:
Check if an operation can be paginated.
Creates a new, empty file system. The operation requires a creation token in the request that Amazon EFS uses to ensure idempotent creation (calling the operation with same creation token has no effect). If a file system does not currently exist that is owned by the caller's AWS account with the specified creation token, this operation does the following:
Otherwise, this operation returns a FileSystemAlreadyExists error with the ID of the existing file system.
Note
For basic use cases, you can use a randomly generated UUID for the creation token.
The idempotent operation allows you to retry a CreateFileSystem call without risk of creating an extra file system. This can happen when an initial call fails in a way that leaves it uncertain whether or not a file system was actually created. An example might be that a transport level timeout occurred or your connection was reset. As long as you use the same creation token, if the initial call had succeeded in creating a file system, the client can learn of its existence from the FileSystemAlreadyExists error.
Note
The CreateFileSystem call returns while the file system's lifecycle state is still creating . You can check the file system creation status by calling the DescribeFileSystems operation, which among other things returns the file system state.
This operation also takes an optional PerformanceMode parameter that you choose for your file system. We recommend generalPurpose performance mode for most file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. The performance mode can't be changed after the file system has been created. For more information, see Amazon EFS: Performance Modes .
After the file system is fully created, Amazon EFS sets its lifecycle state to available , at which point you can create one or more mount targets for the file system in your VPC. For more information, see CreateMountTarget . You mount your Amazon EFS file system on an EC2 instances in your VPC by using the mount target. For more information, see Amazon EFS: How it Works .
This operation requires permissions for the elasticfilesystem:CreateFileSystem action.
See also: AWS API Documentation
Request Syntax
response = client.create_file_system(
CreationToken='string',
PerformanceMode='generalPurpose'|'maxIO',
Encrypted=True|False,
KmsKeyId='string',
ThroughputMode='bursting'|'provisioned',
ProvisionedThroughputInMibps=123.0
)
[REQUIRED]
String of up to 64 ASCII characters. Amazon EFS uses this to ensure idempotent creation.
The ID of the AWS KMS CMK to be used to protect the encrypted file system. This parameter is only required if you want to use a non-default CMK. If this parameter is not specified, the default CMK for Amazon EFS is used. This ID can be in one of the following formats:
If KmsKeyId is specified, the CreateFileSystemRequest$Encrypted parameter must be set to true.
dict
Response Syntax
{
'OwnerId': 'string',
'CreationToken': 'string',
'FileSystemId': 'string',
'CreationTime': datetime(2015, 1, 1),
'LifeCycleState': 'creating'|'available'|'updating'|'deleting'|'deleted',
'Name': 'string',
'NumberOfMountTargets': 123,
'SizeInBytes': {
'Value': 123,
'Timestamp': datetime(2015, 1, 1),
'ValueInIA': 123,
'ValueInStandard': 123
},
'PerformanceMode': 'generalPurpose'|'maxIO',
'Encrypted': True|False,
'KmsKeyId': 'string',
'ThroughputMode': 'bursting'|'provisioned',
'ProvisionedThroughputInMibps': 123.0
}
Response Structure
(dict) --
Description of the file system.
OwnerId (string) --
AWS account that created the file system. If the file system was created by an IAM user, the parent account to which the user belongs is the owner.
CreationToken (string) --
Opaque string specified in the request.
FileSystemId (string) --
ID of the file system, assigned by Amazon EFS.
CreationTime (datetime) --
Time that the file system was created, in seconds (since 1970-01-01T00:00:00Z).
LifeCycleState (string) --
Lifecycle phase of the file system.
Name (string) --
You can add tags to a file system, including a Name tag. For more information, see CreateTags . If the file system has a Name tag, Amazon EFS returns the value in this field.
NumberOfMountTargets (integer) --
Current number of mount targets that the file system has. For more information, see CreateMountTarget .
SizeInBytes (dict) --
Latest known metered size (in bytes) of data stored in the file system, in its Value field, and the time at which that size was determined in its Timestamp field. The Timestamp value is the integer number of seconds since 1970-01-01T00:00:00Z. The SizeInBytes value doesn't represent the size of a consistent snapshot of the file system, but it is eventually consistent when there are no writes to the file system. That is, SizeInBytes represents actual size only if the file system is not modified for a period longer than a couple of hours. Otherwise, the value is not the exact size that the file system was at any point in time.
Value (integer) --
Latest known metered size (in bytes) of data stored in the file system.
Timestamp (datetime) --
Time at which the size of data, returned in the Value field, was determined. The value is the integer number of seconds since 1970-01-01T00:00:00Z.
ValueInIA (integer) --
The latest known metered size (in bytes) of data stored in the Infrequent Access storage class.
ValueInStandard (integer) --
The latest known metered size (in bytes) of data stored in the Standard storage class.
PerformanceMode (string) --
The PerformanceMode of the file system.
Encrypted (boolean) --
A Boolean value that, if true, indicates that the file system is encrypted.
KmsKeyId (string) --
The ID of an AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the encrypted file system.
ThroughputMode (string) --
The throughput mode for a file system. There are two throughput modes to choose from for your file system: bursting and provisioned. You can decrease your file system's throughput in Provisioned Throughput mode or change between the throughput modes as long as it’s been more than 24 hours since the last decrease or throughput mode change.
ProvisionedThroughputInMibps (float) --
The throughput, measured in MiB/s, that you want to provision for a file system. The limit on throughput is 1024 MiB/s. You can get these limits increased by contacting AWS Support. For more information, see Amazon EFS Limits That You Can Increase in the Amazon EFS User Guide.
Examples
This operation creates a new file system with the default generalpurpose performance mode.
response = client.create_file_system(
CreationToken='tokenstring',
PerformanceMode='generalPurpose',
)
print(response)
Expected Output:
{
'CreationTime': datetime(2016, 12, 15, 22, 38, 44, 3, 350, 0),
'CreationToken': 'tokenstring',
'FileSystemId': 'fs-01234567',
'LifeCycleState': 'creating',
'NumberOfMountTargets': 0,
'OwnerId': '012345678912',
'PerformanceMode': 'generalPurpose',
'SizeInBytes': {
'Value': 0,
},
'ResponseMetadata': {
'...': '...',
},
}
Creates a mount target for a file system. You can then mount the file system on EC2 instances by using the mount target.
You can create one mount target in each Availability Zone in your VPC. All EC2 instances in a VPC within a given Availability Zone share a single mount target for a given file system. If you have multiple subnets in an Availability Zone, you create a mount target in one of the subnets. EC2 instances do not need to be in the same subnet as the mount target in order to access their file system. For more information, see Amazon EFS: How it Works .
In the request, you also specify a file system ID for which you are creating the mount target and the file system's lifecycle state must be available . For more information, see DescribeFileSystems .
In the request, you also provide a subnet ID, which determines the following:
After creating the mount target, Amazon EFS returns a response that includes, a MountTargetId and an IpAddress . You use this IP address when mounting the file system in an EC2 instance. You can also use the mount target's DNS name when mounting the file system. The EC2 instance on which you mount the file system by using the mount target can resolve the mount target's DNS name to its IP address. For more information, see How it Works: Implementation Overview .
Note that you can create mount targets for a file system in only one VPC, and there can be only one mount target per Availability Zone. That is, if the file system already has one or more mount targets created for it, the subnet specified in the request to add another mount target must meet the following requirements:
If the request satisfies the requirements, Amazon EFS does the following:
Each Amazon EFS mount target has one corresponding requester-managed EC2 network interface. After the network interface is created, Amazon EFS sets the NetworkInterfaceId field in the mount target's description to the network interface ID, and the IpAddress field to its address. If network interface creation fails, the entire CreateMountTarget operation fails.
Note
The CreateMountTarget call returns only after creating the network interface, but while the mount target state is still creating , you can check the mount target creation status by calling the DescribeMountTargets operation, which among other things returns the mount target state.
We recommend that you create a mount target in each of the Availability Zones. There are cost considerations for using a file system in an Availability Zone through a mount target created in another Availability Zone. For more information, see Amazon EFS . In addition, by always using a mount target local to the instance's Availability Zone, you eliminate a partial failure scenario. If the Availability Zone in which your mount target is created goes down, then you won't be able to access your file system through that mount target.
This operation requires permissions for the following action on the file system:
This operation also requires permissions for the following Amazon EC2 actions:
See also: AWS API Documentation
Request Syntax
response = client.create_mount_target(
FileSystemId='string',
SubnetId='string',
IpAddress='string',
SecurityGroups=[
'string',
]
)
[REQUIRED]
ID of the file system for which to create the mount target.
[REQUIRED]
ID of the subnet to add the mount target in.
Up to five VPC security group IDs, of the form sg-xxxxxxxx . These must be for the same VPC as subnet specified.
dict
Response Syntax
{
'OwnerId': 'string',
'MountTargetId': 'string',
'FileSystemId': 'string',
'SubnetId': 'string',
'LifeCycleState': 'creating'|'available'|'updating'|'deleting'|'deleted',
'IpAddress': 'string',
'NetworkInterfaceId': 'string'
}
Response Structure
(dict) --
Provides a description of a mount target.
OwnerId (string) --
AWS account ID that owns the resource.
MountTargetId (string) --
System-assigned mount target ID.
FileSystemId (string) --
ID of the file system for which the mount target is intended.
SubnetId (string) --
ID of the mount target's subnet.
LifeCycleState (string) --
Lifecycle state of the mount target.
IpAddress (string) --
Address at which the file system can be mounted by using the mount target.
NetworkInterfaceId (string) --
ID of the network interface that Amazon EFS created when it created the mount target.
Examples
This operation creates a new mount target for an EFS file system.
response = client.create_mount_target(
FileSystemId='fs-01234567',
SubnetId='subnet-1234abcd',
)
print(response)
Expected Output:
{
'FileSystemId': 'fs-01234567',
'IpAddress': '192.0.0.2',
'LifeCycleState': 'creating',
'MountTargetId': 'fsmt-12340abc',
'NetworkInterfaceId': 'eni-cedf6789',
'OwnerId': '012345678912',
'SubnetId': 'subnet-1234abcd',
'ResponseMetadata': {
'...': '...',
},
}
Creates or overwrites tags associated with a file system. Each tag is a key-value pair. If a tag key specified in the request already exists on the file system, this operation overwrites its value with the value provided in the request. If you add the Name tag to your file system, Amazon EFS returns it in the response to the DescribeFileSystems operation.
This operation requires permission for the elasticfilesystem:CreateTags action.
See also: AWS API Documentation
Request Syntax
response = client.create_tags(
FileSystemId='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
ID of the file system whose tags you want to modify (String). This operation modifies the tags only, not the file system.
[REQUIRED]
Array of Tag objects to add. Each Tag object is a key-value pair.
A tag is a key-value pair. Allowed characters: letters, white space, and numbers, representable in UTF-8, and the following characters:+ - = . _ : /
Tag key (String). The key can't start with aws: .
Value of the tag key.
None
Examples
This operation creates a new tag for an EFS file system.
response = client.create_tags(
FileSystemId='fs-01234567',
Tags=[
{
'Key': 'Name',
'Value': 'MyFileSystem',
},
],
)
print(response)
Expected Output:
{
'ResponseMetadata': {
'...': '...',
},
}
Deletes a file system, permanently severing access to its contents. Upon return, the file system no longer exists and you can't access any contents of the deleted file system.
You can't delete a file system that is in use. That is, if the file system has any mount targets, you must first delete them. For more information, see DescribeMountTargets and DeleteMountTarget .
Note
The DeleteFileSystem call returns while the file system state is still deleting . You can check the file system deletion status by calling the DescribeFileSystems operation, which returns a list of file systems in your account. If you pass file system ID or creation token for the deleted file system, the DescribeFileSystems returns a 404 FileSystemNotFound error.
This operation requires permissions for the elasticfilesystem:DeleteFileSystem action.
See also: AWS API Documentation
Request Syntax
response = client.delete_file_system(
FileSystemId='string'
)
[REQUIRED]
ID of the file system you want to delete.
Examples
This operation deletes an EFS file system.
response = client.delete_file_system(
FileSystemId='fs-01234567',
)
print(response)
Expected Output:
{
'ResponseMetadata': {
'...': '...',
},
}
Deletes the specified mount target.
This operation forcibly breaks any mounts of the file system by using the mount target that is being deleted, which might disrupt instances or applications using those mounts. To avoid applications getting cut off abruptly, you might consider unmounting any mounts of the mount target, if feasible. The operation also deletes the associated network interface. Uncommitted writes might be lost, but breaking a mount target using this operation does not corrupt the file system itself. The file system you created remains. You can mount an EC2 instance in your VPC by using another mount target.
This operation requires permissions for the following action on the file system:
Note
The DeleteMountTarget call returns while the mount target state is still deleting . You can check the mount target deletion by calling the DescribeMountTargets operation, which returns a list of mount target descriptions for the given file system.
The operation also requires permissions for the following Amazon EC2 action on the mount target's network interface:
See also: AWS API Documentation
Request Syntax
response = client.delete_mount_target(
MountTargetId='string'
)
[REQUIRED]
ID of the mount target to delete (String).
Examples
This operation deletes a mount target.
response = client.delete_mount_target(
MountTargetId='fsmt-12340abc',
)
print(response)
Expected Output:
{
'ResponseMetadata': {
'...': '...',
},
}
Deletes the specified tags from a file system. If the DeleteTags request includes a tag key that does not exist, Amazon EFS ignores it and doesn't cause an error. For more information about tags and related restrictions, see Tag Restrictions in the AWS Billing and Cost Management User Guide .
This operation requires permissions for the elasticfilesystem:DeleteTags action.
See also: AWS API Documentation
Request Syntax
response = client.delete_tags(
FileSystemId='string',
TagKeys=[
'string',
]
)
[REQUIRED]
ID of the file system whose tags you want to delete (String).
[REQUIRED]
List of tag keys to delete.
None
Examples
This operation deletes tags for an EFS file system.
response = client.delete_tags(
FileSystemId='fs-01234567',
TagKeys=[
'Name',
],
)
print(response)
Expected Output:
{
'ResponseMetadata': {
'...': '...',
},
}
Returns the description of a specific Amazon EFS file system if either the file system CreationToken or the FileSystemId is provided. Otherwise, it returns descriptions of all file systems owned by the caller's AWS account in the AWS Region of the endpoint that you're calling.
When retrieving all file system descriptions, you can optionally specify the MaxItems parameter to limit the number of descriptions in a response. Currently, this number is automatically set to 10. If more file system descriptions remain, Amazon EFS returns a NextMarker , an opaque token, in the response. In this case, you should send a subsequent request with the Marker request parameter set to the value of NextMarker .
To retrieve a list of your file system descriptions, this operation is used in an iterative process, where DescribeFileSystems is called first without the Marker and then the operation continues to call it with the Marker parameter set to the value of the NextMarker from the previous response until the response has no NextMarker .
The order of file systems returned in the response of one DescribeFileSystems call and the order of file systems returned across the responses of a multi-call iteration is unspecified.
This operation requires permissions for the elasticfilesystem:DescribeFileSystems action.
See also: AWS API Documentation
Request Syntax
response = client.describe_file_systems(
MaxItems=123,
Marker='string',
CreationToken='string',
FileSystemId='string'
)
dict
Response Syntax
{
'Marker': 'string',
'FileSystems': [
{
'OwnerId': 'string',
'CreationToken': 'string',
'FileSystemId': 'string',
'CreationTime': datetime(2015, 1, 1),
'LifeCycleState': 'creating'|'available'|'updating'|'deleting'|'deleted',
'Name': 'string',
'NumberOfMountTargets': 123,
'SizeInBytes': {
'Value': 123,
'Timestamp': datetime(2015, 1, 1),
'ValueInIA': 123,
'ValueInStandard': 123
},
'PerformanceMode': 'generalPurpose'|'maxIO',
'Encrypted': True|False,
'KmsKeyId': 'string',
'ThroughputMode': 'bursting'|'provisioned',
'ProvisionedThroughputInMibps': 123.0
},
],
'NextMarker': 'string'
}
Response Structure
(dict) --
Marker (string) --
Present if provided by caller in the request (String).
FileSystems (list) --
Array of file system descriptions.
(dict) --
Description of the file system.
OwnerId (string) --
AWS account that created the file system. If the file system was created by an IAM user, the parent account to which the user belongs is the owner.
CreationToken (string) --
Opaque string specified in the request.
FileSystemId (string) --
ID of the file system, assigned by Amazon EFS.
CreationTime (datetime) --
Time that the file system was created, in seconds (since 1970-01-01T00:00:00Z).
LifeCycleState (string) --
Lifecycle phase of the file system.
Name (string) --
You can add tags to a file system, including a Name tag. For more information, see CreateTags . If the file system has a Name tag, Amazon EFS returns the value in this field.
NumberOfMountTargets (integer) --
Current number of mount targets that the file system has. For more information, see CreateMountTarget .
SizeInBytes (dict) --
Latest known metered size (in bytes) of data stored in the file system, in its Value field, and the time at which that size was determined in its Timestamp field. The Timestamp value is the integer number of seconds since 1970-01-01T00:00:00Z. The SizeInBytes value doesn't represent the size of a consistent snapshot of the file system, but it is eventually consistent when there are no writes to the file system. That is, SizeInBytes represents actual size only if the file system is not modified for a period longer than a couple of hours. Otherwise, the value is not the exact size that the file system was at any point in time.
Value (integer) --
Latest known metered size (in bytes) of data stored in the file system.
Timestamp (datetime) --
Time at which the size of data, returned in the Value field, was determined. The value is the integer number of seconds since 1970-01-01T00:00:00Z.
ValueInIA (integer) --
The latest known metered size (in bytes) of data stored in the Infrequent Access storage class.
ValueInStandard (integer) --
The latest known metered size (in bytes) of data stored in the Standard storage class.
PerformanceMode (string) --
The PerformanceMode of the file system.
Encrypted (boolean) --
A Boolean value that, if true, indicates that the file system is encrypted.
KmsKeyId (string) --
The ID of an AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the encrypted file system.
ThroughputMode (string) --
The throughput mode for a file system. There are two throughput modes to choose from for your file system: bursting and provisioned. You can decrease your file system's throughput in Provisioned Throughput mode or change between the throughput modes as long as it’s been more than 24 hours since the last decrease or throughput mode change.
ProvisionedThroughputInMibps (float) --
The throughput, measured in MiB/s, that you want to provision for a file system. The limit on throughput is 1024 MiB/s. You can get these limits increased by contacting AWS Support. For more information, see Amazon EFS Limits That You Can Increase in the Amazon EFS User Guide.
NextMarker (string) --
Present if there are more file systems than returned in the response (String). You can use the NextMarker in the subsequent request to fetch the descriptions.
Examples
This operation describes all of the EFS file systems in an account.
response = client.describe_file_systems(
)
print(response)
Expected Output:
{
'FileSystems': [
{
'CreationTime': datetime(2016, 12, 15, 22, 38, 44, 3, 350, 0),
'CreationToken': 'tokenstring',
'FileSystemId': 'fs-01234567',
'LifeCycleState': 'available',
'Name': 'MyFileSystem',
'NumberOfMountTargets': 1,
'OwnerId': '012345678912',
'PerformanceMode': 'generalPurpose',
'SizeInBytes': {
'Value': 6144,
},
},
],
'ResponseMetadata': {
'...': '...',
},
}
Returns the current LifecycleConfiguration object for the specified Amazon EFS file system. EFS lifecycle management uses the LifecycleConfiguration to identify which files to move to the EFS Infrequent Access (IA) storage class. For a file system without a LifecycleConfiguration , the call returns an empty array in the response.
This operation requires permissions for the elasticfilesystem:DescribeLifecycleConfiguration operation.
See also: AWS API Documentation
Request Syntax
response = client.describe_lifecycle_configuration(
FileSystemId='string'
)
[REQUIRED]
The ID of the file system whose LifecycleConfiguration object you want to retrieve (String).
{
'LifecyclePolicies': [
{
'TransitionToIA': 'AFTER_30_DAYS'
},
]
}
Response Structure
An array of lifecycle management policies. Currently, EFS supports a maximum of one policy per file system.
Describes a policy used by EFS lifecycle management to transition files to the Infrequent Access (IA) storage class.
A value that indicates how long it takes to transition to the IA storage class. Currently, the only possible value is AFTER_30_DAYS .
AFTER_30_DAYS indicates files that have not been read from or written to for 30 days are transitioned from the Standard storage class to the IA storage class. Metadata operations such as listing the contents of a directory don't count as a file access event.
Returns the security groups currently in effect for a mount target. This operation requires that the network interface of the mount target has been created and the lifecycle state of the mount target is not deleted .
This operation requires permissions for the following actions:
See also: AWS API Documentation
Request Syntax
response = client.describe_mount_target_security_groups(
MountTargetId='string'
)
[REQUIRED]
ID of the mount target whose security groups you want to retrieve.
{
'SecurityGroups': [
'string',
]
}
Response Structure
Array of security groups.
Examples
This operation describes all of the security groups for a file system's mount target.
response = client.describe_mount_target_security_groups(
MountTargetId='fsmt-12340abc',
)
print(response)
Expected Output:
{
'SecurityGroups': [
'sg-fghi4567',
],
'ResponseMetadata': {
'...': '...',
},
}
Returns the descriptions of all the current mount targets, or a specific mount target, for a file system. When requesting all of the current mount targets, the order of mount targets returned in the response is unspecified.
This operation requires permissions for the elasticfilesystem:DescribeMountTargets action, on either the file system ID that you specify in FileSystemId , or on the file system of the mount target that you specify in MountTargetId .
See also: AWS API Documentation
Request Syntax
response = client.describe_mount_targets(
MaxItems=123,
Marker='string',
FileSystemId='string',
MountTargetId='string'
)
dict
Response Syntax
{
'Marker': 'string',
'MountTargets': [
{
'OwnerId': 'string',
'MountTargetId': 'string',
'FileSystemId': 'string',
'SubnetId': 'string',
'LifeCycleState': 'creating'|'available'|'updating'|'deleting'|'deleted',
'IpAddress': 'string',
'NetworkInterfaceId': 'string'
},
],
'NextMarker': 'string'
}
Response Structure
(dict) --
Marker (string) --
If the request included the Marker , the response returns that value in this field.
MountTargets (list) --
Returns the file system's mount targets as an array of MountTargetDescription objects.
(dict) --
Provides a description of a mount target.
OwnerId (string) --
AWS account ID that owns the resource.
MountTargetId (string) --
System-assigned mount target ID.
FileSystemId (string) --
ID of the file system for which the mount target is intended.
SubnetId (string) --
ID of the mount target's subnet.
LifeCycleState (string) --
Lifecycle state of the mount target.
IpAddress (string) --
Address at which the file system can be mounted by using the mount target.
NetworkInterfaceId (string) --
ID of the network interface that Amazon EFS created when it created the mount target.
NextMarker (string) --
If a value is present, there are more mount targets to return. In a subsequent request, you can provide Marker in your request with this value to retrieve the next set of mount targets.
Examples
This operation describes all of a file system's mount targets.
response = client.describe_mount_targets(
FileSystemId='fs-01234567',
)
print(response)
Expected Output:
{
'MountTargets': [
{
'FileSystemId': 'fs-01234567',
'IpAddress': '192.0.0.2',
'LifeCycleState': 'available',
'MountTargetId': 'fsmt-12340abc',
'NetworkInterfaceId': 'eni-cedf6789',
'OwnerId': '012345678912',
'SubnetId': 'subnet-1234abcd',
},
],
'ResponseMetadata': {
'...': '...',
},
}
Returns the tags associated with a file system. The order of tags returned in the response of one DescribeTags call and the order of tags returned across the responses of a multi-call iteration (when using pagination) is unspecified.
This operation requires permissions for the elasticfilesystem:DescribeTags action.
See also: AWS API Documentation
Request Syntax
response = client.describe_tags(
MaxItems=123,
Marker='string',
FileSystemId='string'
)
[REQUIRED]
ID of the file system whose tag set you want to retrieve.
dict
Response Syntax
{
'Marker': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'NextMarker': 'string'
}
Response Structure
(dict) --
Marker (string) --
If the request included a Marker , the response returns that value in this field.
Tags (list) --
Returns tags associated with the file system as an array of Tag objects.
(dict) --
A tag is a key-value pair. Allowed characters: letters, white space, and numbers, representable in UTF-8, and the following characters:+ - = . _ : /
Key (string) --
Tag key (String). The key can't start with aws: .
Value (string) --
Value of the tag key.
NextMarker (string) --
If a value is present, there are more tags to return. In a subsequent request, you can provide the value of NextMarker as the value of the Marker parameter in your next request to retrieve the next set of tags.
Examples
This operation describes all of a file system's tags.
response = client.describe_tags(
FileSystemId='fs-01234567',
)
print(response)
Expected Output:
{
'Tags': [
{
'Key': 'Name',
'Value': 'MyFileSystem',
},
],
'ResponseMetadata': {
'...': '...',
},
}
Generate a presigned url given a client, its method, and arguments
The presigned url
Create a paginator for an operation.
Returns an object that can wait for some condition.
Modifies the set of security groups in effect for a mount target.
When you create a mount target, Amazon EFS also creates a new network interface. For more information, see CreateMountTarget . This operation replaces the security groups in effect for the network interface associated with a mount target, with the SecurityGroups provided in the request. This operation requires that the network interface of the mount target has been created and the lifecycle state of the mount target is not deleted .
The operation requires permissions for the following actions:
See also: AWS API Documentation
Request Syntax
response = client.modify_mount_target_security_groups(
MountTargetId='string',
SecurityGroups=[
'string',
]
)
[REQUIRED]
ID of the mount target whose security groups you want to modify.
Array of up to five VPC security group IDs.
None
Examples
This operation modifies the security groups associated with a mount target for a file system.
response = client.modify_mount_target_security_groups(
MountTargetId='fsmt-12340abc',
SecurityGroups=[
'sg-abcd1234',
],
)
print(response)
Expected Output:
{
'ResponseMetadata': {
'...': '...',
},
}
Enables lifecycle management by creating a new LifecycleConfiguration object. A LifecycleConfiguration defines when files in an Amazon EFS file system are automatically transitioned to the lower-cost EFS Infrequent Access (IA) storage class. A LifecycleConfiguration applies to all files in a file system.
Each Amazon EFS file system supports one lifecycle configuration, which applies to all files in the file system. If a LifecycleConfiguration already exists for the specified file system, a PutLifecycleConfiguration call modifies the existing configuration. A PutLifecycleConfiguration call with an empty LifecyclePolicies array in the request body deletes any existing LifecycleConfiguration and disables lifecycle management.
Note
You can enable lifecycle management only for EFS file systems created after the release of EFS infrequent access.
In the request, specify the following:
This operation requires permissions for the elasticfilesystem:PutLifecycleConfiguration operation.
To apply a LifecycleConfiguration object to an encrypted file system, you need the same AWS Key Management Service (AWS KMS) permissions as when you created the encrypted file system.
See also: AWS API Documentation
Request Syntax
response = client.put_lifecycle_configuration(
FileSystemId='string',
LifecyclePolicies=[
{
'TransitionToIA': 'AFTER_30_DAYS'
},
]
)
[REQUIRED]
The ID of the file system for which you are creating the LifecycleConfiguration object (String).
[REQUIRED]
An array of LifecyclePolicy objects that define the file system's LifecycleConfiguration object. A LifecycleConfiguration object tells lifecycle management when to transition files from the Standard storage class to the Infrequent Access storage class.
Describes a policy used by EFS lifecycle management to transition files to the Infrequent Access (IA) storage class.
A value that indicates how long it takes to transition to the IA storage class. Currently, the only possible value is AFTER_30_DAYS .
AFTER_30_DAYS indicates files that have not been read from or written to for 30 days are transitioned from the Standard storage class to the IA storage class. Metadata operations such as listing the contents of a directory don't count as a file access event.
dict
Response Syntax
{
'LifecyclePolicies': [
{
'TransitionToIA': 'AFTER_30_DAYS'
},
]
}
Response Structure
(dict) --
LifecyclePolicies (list) --
An array of lifecycle management policies. Currently, EFS supports a maximum of one policy per file system.
(dict) --
Describes a policy used by EFS lifecycle management to transition files to the Infrequent Access (IA) storage class.
TransitionToIA (string) --
A value that indicates how long it takes to transition to the IA storage class. Currently, the only possible value is AFTER_30_DAYS .
AFTER_30_DAYS indicates files that have not been read from or written to for 30 days are transitioned from the Standard storage class to the IA storage class. Metadata operations such as listing the contents of a directory don't count as a file access event.
Updates the throughput mode or the amount of provisioned throughput of an existing file system.
See also: AWS API Documentation
Request Syntax
response = client.update_file_system(
FileSystemId='string',
ThroughputMode='bursting'|'provisioned',
ProvisionedThroughputInMibps=123.0
)
[REQUIRED]
The ID of the file system that you want to update.
dict
Response Syntax
{
'OwnerId': 'string',
'CreationToken': 'string',
'FileSystemId': 'string',
'CreationTime': datetime(2015, 1, 1),
'LifeCycleState': 'creating'|'available'|'updating'|'deleting'|'deleted',
'Name': 'string',
'NumberOfMountTargets': 123,
'SizeInBytes': {
'Value': 123,
'Timestamp': datetime(2015, 1, 1),
'ValueInIA': 123,
'ValueInStandard': 123
},
'PerformanceMode': 'generalPurpose'|'maxIO',
'Encrypted': True|False,
'KmsKeyId': 'string',
'ThroughputMode': 'bursting'|'provisioned',
'ProvisionedThroughputInMibps': 123.0
}
Response Structure
(dict) --
Description of the file system.
OwnerId (string) --
AWS account that created the file system. If the file system was created by an IAM user, the parent account to which the user belongs is the owner.
CreationToken (string) --
Opaque string specified in the request.
FileSystemId (string) --
ID of the file system, assigned by Amazon EFS.
CreationTime (datetime) --
Time that the file system was created, in seconds (since 1970-01-01T00:00:00Z).
LifeCycleState (string) --
Lifecycle phase of the file system.
Name (string) --
You can add tags to a file system, including a Name tag. For more information, see CreateTags . If the file system has a Name tag, Amazon EFS returns the value in this field.
NumberOfMountTargets (integer) --
Current number of mount targets that the file system has. For more information, see CreateMountTarget .
SizeInBytes (dict) --
Latest known metered size (in bytes) of data stored in the file system, in its Value field, and the time at which that size was determined in its Timestamp field. The Timestamp value is the integer number of seconds since 1970-01-01T00:00:00Z. The SizeInBytes value doesn't represent the size of a consistent snapshot of the file system, but it is eventually consistent when there are no writes to the file system. That is, SizeInBytes represents actual size only if the file system is not modified for a period longer than a couple of hours. Otherwise, the value is not the exact size that the file system was at any point in time.
Value (integer) --
Latest known metered size (in bytes) of data stored in the file system.
Timestamp (datetime) --
Time at which the size of data, returned in the Value field, was determined. The value is the integer number of seconds since 1970-01-01T00:00:00Z.
ValueInIA (integer) --
The latest known metered size (in bytes) of data stored in the Infrequent Access storage class.
ValueInStandard (integer) --
The latest known metered size (in bytes) of data stored in the Standard storage class.
PerformanceMode (string) --
The PerformanceMode of the file system.
Encrypted (boolean) --
A Boolean value that, if true, indicates that the file system is encrypted.
KmsKeyId (string) --
The ID of an AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the encrypted file system.
ThroughputMode (string) --
The throughput mode for a file system. There are two throughput modes to choose from for your file system: bursting and provisioned. You can decrease your file system's throughput in Provisioned Throughput mode or change between the throughput modes as long as it’s been more than 24 hours since the last decrease or throughput mode change.
ProvisionedThroughputInMibps (float) --
The throughput, measured in MiB/s, that you want to provision for a file system. The limit on throughput is 1024 MiB/s. You can get these limits increased by contacting AWS Support. For more information, see Amazon EFS Limits That You Can Increase in the Amazon EFS User Guide.
The available paginators are:
paginator = client.get_paginator('describe_file_systems')
Creates an iterator that will paginate through responses from EFS.Client.describe_file_systems().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
CreationToken='string',
FileSystemId='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Marker': 'string',
'FileSystems': [
{
'OwnerId': 'string',
'CreationToken': 'string',
'FileSystemId': 'string',
'CreationTime': datetime(2015, 1, 1),
'LifeCycleState': 'creating'|'available'|'updating'|'deleting'|'deleted',
'Name': 'string',
'NumberOfMountTargets': 123,
'SizeInBytes': {
'Value': 123,
'Timestamp': datetime(2015, 1, 1),
'ValueInIA': 123,
'ValueInStandard': 123
},
'PerformanceMode': 'generalPurpose'|'maxIO',
'Encrypted': True|False,
'KmsKeyId': 'string',
'ThroughputMode': 'bursting'|'provisioned',
'ProvisionedThroughputInMibps': 123.0
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Marker (string) --
Present if provided by caller in the request (String).
FileSystems (list) --
Array of file system descriptions.
(dict) --
Description of the file system.
OwnerId (string) --
AWS account that created the file system. If the file system was created by an IAM user, the parent account to which the user belongs is the owner.
CreationToken (string) --
Opaque string specified in the request.
FileSystemId (string) --
ID of the file system, assigned by Amazon EFS.
CreationTime (datetime) --
Time that the file system was created, in seconds (since 1970-01-01T00:00:00Z).
LifeCycleState (string) --
Lifecycle phase of the file system.
Name (string) --
You can add tags to a file system, including a Name tag. For more information, see CreateTags . If the file system has a Name tag, Amazon EFS returns the value in this field.
NumberOfMountTargets (integer) --
Current number of mount targets that the file system has. For more information, see CreateMountTarget .
SizeInBytes (dict) --
Latest known metered size (in bytes) of data stored in the file system, in its Value field, and the time at which that size was determined in its Timestamp field. The Timestamp value is the integer number of seconds since 1970-01-01T00:00:00Z. The SizeInBytes value doesn't represent the size of a consistent snapshot of the file system, but it is eventually consistent when there are no writes to the file system. That is, SizeInBytes represents actual size only if the file system is not modified for a period longer than a couple of hours. Otherwise, the value is not the exact size that the file system was at any point in time.
Value (integer) --
Latest known metered size (in bytes) of data stored in the file system.
Timestamp (datetime) --
Time at which the size of data, returned in the Value field, was determined. The value is the integer number of seconds since 1970-01-01T00:00:00Z.
ValueInIA (integer) --
The latest known metered size (in bytes) of data stored in the Infrequent Access storage class.
ValueInStandard (integer) --
The latest known metered size (in bytes) of data stored in the Standard storage class.
PerformanceMode (string) --
The PerformanceMode of the file system.
Encrypted (boolean) --
A Boolean value that, if true, indicates that the file system is encrypted.
KmsKeyId (string) --
The ID of an AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the encrypted file system.
ThroughputMode (string) --
The throughput mode for a file system. There are two throughput modes to choose from for your file system: bursting and provisioned. You can decrease your file system's throughput in Provisioned Throughput mode or change between the throughput modes as long as it’s been more than 24 hours since the last decrease or throughput mode change.
ProvisionedThroughputInMibps (float) --
The throughput, measured in MiB/s, that you want to provision for a file system. The limit on throughput is 1024 MiB/s. You can get these limits increased by contacting AWS Support. For more information, see Amazon EFS Limits That You Can Increase in the Amazon EFS User Guide.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_mount_targets')
Creates an iterator that will paginate through responses from EFS.Client.describe_mount_targets().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
FileSystemId='string',
MountTargetId='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Marker': 'string',
'MountTargets': [
{
'OwnerId': 'string',
'MountTargetId': 'string',
'FileSystemId': 'string',
'SubnetId': 'string',
'LifeCycleState': 'creating'|'available'|'updating'|'deleting'|'deleted',
'IpAddress': 'string',
'NetworkInterfaceId': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Marker (string) --
If the request included the Marker , the response returns that value in this field.
MountTargets (list) --
Returns the file system's mount targets as an array of MountTargetDescription objects.
(dict) --
Provides a description of a mount target.
OwnerId (string) --
AWS account ID that owns the resource.
MountTargetId (string) --
System-assigned mount target ID.
FileSystemId (string) --
ID of the file system for which the mount target is intended.
SubnetId (string) --
ID of the mount target's subnet.
LifeCycleState (string) --
Lifecycle state of the mount target.
IpAddress (string) --
Address at which the file system can be mounted by using the mount target.
NetworkInterfaceId (string) --
ID of the network interface that Amazon EFS created when it created the mount target.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_tags')
Creates an iterator that will paginate through responses from EFS.Client.describe_tags().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
FileSystemId='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
ID of the file system whose tag set you want to retrieve.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Marker': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Marker (string) --
If the request included a Marker , the response returns that value in this field.
Tags (list) --
Returns tags associated with the file system as an array of Tag objects.
(dict) --
A tag is a key-value pair. Allowed characters: letters, white space, and numbers, representable in UTF-8, and the following characters:+ - = . _ : /
Key (string) --
Tag key (String). The key can't start with aws: .
Value (string) --
Value of the tag key.
NextToken (string) --
A token to resume pagination.