Table of Contents
A low-level client representing AWS CodeBuild:
import boto3
client = boto3.client('codebuild')
These are the available methods:
Deletes one or more builds.
See also: AWS API Documentation
Request Syntax
response = client.batch_delete_builds(
ids=[
'string',
]
)
[REQUIRED]
The IDs of the builds to delete.
{
'buildsDeleted': [
'string',
],
'buildsNotDeleted': [
{
'id': 'string',
'statusCode': 'string'
},
]
}
Response Structure
The IDs of the builds that were successfully deleted.
Information about any builds that could not be successfully deleted.
Information about a build that could not be successfully deleted.
The ID of the build that could not be successfully deleted.
Additional information about the build that could not be successfully deleted.
Exceptions
Gets information about one or more builds.
See also: AWS API Documentation
Request Syntax
response = client.batch_get_builds(
ids=[
'string',
]
)
[REQUIRED]
The IDs of the builds.
{
'builds': [
{
'id': 'string',
'arn': 'string',
'buildNumber': 123,
'startTime': datetime(2015, 1, 1),
'endTime': datetime(2015, 1, 1),
'currentPhase': 'string',
'buildStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
'sourceVersion': 'string',
'resolvedSourceVersion': 'string',
'projectName': 'string',
'phases': [
{
'phaseType': 'SUBMITTED'|'QUEUED'|'PROVISIONING'|'DOWNLOAD_SOURCE'|'INSTALL'|'PRE_BUILD'|'BUILD'|'POST_BUILD'|'UPLOAD_ARTIFACTS'|'FINALIZING'|'COMPLETED',
'phaseStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
'startTime': datetime(2015, 1, 1),
'endTime': datetime(2015, 1, 1),
'durationInSeconds': 123,
'contexts': [
{
'statusCode': 'string',
'message': 'string'
},
]
},
],
'source': {
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
'secondarySources': [
{
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
],
'secondarySourceVersions': [
{
'sourceIdentifier': 'string',
'sourceVersion': 'string'
},
],
'artifacts': {
'location': 'string',
'sha256sum': 'string',
'md5sum': 'string',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
'secondaryArtifacts': [
{
'location': 'string',
'sha256sum': 'string',
'md5sum': 'string',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
],
'cache': {
'type': 'NO_CACHE'|'S3'|'LOCAL',
'location': 'string',
'modes': [
'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
]
},
'environment': {
'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER',
'image': 'string',
'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
'environmentVariables': [
{
'name': 'string',
'value': 'string',
'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
},
],
'privilegedMode': True|False,
'certificate': 'string',
'registryCredential': {
'credential': 'string',
'credentialProvider': 'SECRETS_MANAGER'
},
'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
},
'serviceRole': 'string',
'logs': {
'groupName': 'string',
'streamName': 'string',
'deepLink': 'string',
's3DeepLink': 'string',
'cloudWatchLogsArn': 'string',
's3LogsArn': 'string',
'cloudWatchLogs': {
'status': 'ENABLED'|'DISABLED',
'groupName': 'string',
'streamName': 'string'
},
's3Logs': {
'status': 'ENABLED'|'DISABLED',
'location': 'string',
'encryptionDisabled': True|False
}
},
'timeoutInMinutes': 123,
'queuedTimeoutInMinutes': 123,
'buildComplete': True|False,
'initiator': 'string',
'vpcConfig': {
'vpcId': 'string',
'subnets': [
'string',
],
'securityGroupIds': [
'string',
]
},
'networkInterface': {
'subnetId': 'string',
'networkInterfaceId': 'string'
},
'encryptionKey': 'string',
'exportedEnvironmentVariables': [
{
'name': 'string',
'value': 'string'
},
],
'reportArns': [
'string',
],
'fileSystemLocations': [
{
'type': 'EFS',
'location': 'string',
'mountPoint': 'string',
'identifier': 'string',
'mountOptions': 'string'
},
]
},
],
'buildsNotFound': [
'string',
]
}
Response Structure
Information about the requested builds.
Information about a build.
The unique ID for the build.
The Amazon Resource Name (ARN) of the build.
The number of the build. For each project, the buildNumber of its first build is 1 . The buildNumber of each subsequent build is incremented by 1 . If a build is deleted, the buildNumber of other builds does not change.
When the build process started, expressed in Unix time format.
When the build process ended, expressed in Unix time format.
The current build phase.
The current status of the build. Valid values include:
Any version identifier for the version of the source code to be built. If sourceVersion is specified at the project level, then this sourceVersion (at the build level) takes precedence.
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
An identifier for the version of this build's source code.
The name of the AWS CodeBuild project.
Information about all previous build phases that are complete and information about any current build phase that is not yet complete.
Information about a stage for a build.
The name of the build phase. Valid values include:
The current status of the build phase. Valid values include:
When the build phase started, expressed in Unix time format.
When the build phase ended, expressed in Unix time format.
How long, in seconds, between the starting and ending times of the build's phase.
Additional information about a build phase, especially to help troubleshoot a failed build.
Additional information about a build phase that has an error. You can use this information for troubleshooting.
The status code for the context of the build phase.
An explanation of the build phase's context. This might include a command ID and an exit code.
Information about the source code to be built.
The type of repository that contains the source code to be built. Valid values include:
Information about the location of the source code to be built. Valid values include:
Information about the Git clone depth for the build project.
Information about the Git submodules configuration for the build project.
Set to true to fetch Git submodules for your AWS CodeBuild build project.
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
The resource value that applies to the specified authorization type.
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
Enable this flag to ignore SSL warnings while connecting to the project source code.
An identifier for this project source.
An array of ProjectSource objects.
Information about the build input source code for the build project.
The type of repository that contains the source code to be built. Valid values include:
Information about the location of the source code to be built. Valid values include:
Information about the Git clone depth for the build project.
Information about the Git submodules configuration for the build project.
Set to true to fetch Git submodules for your AWS CodeBuild build project.
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
The resource value that applies to the specified authorization type.
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
Enable this flag to ignore SSL warnings while connecting to the project source code.
An identifier for this project source.
An array of ProjectSourceVersion objects. Each ProjectSourceVersion must be one of:
A source identifier and its corresponding version.
An identifier for a source in the build project.
The source version for the corresponding source identifier. If specified, must be one of:
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
Information about the output artifacts for the build.
Information about the location of the build artifacts.
The SHA-256 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
The MD5 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
Information that tells you if encryption for build artifacts is disabled.
An identifier for this artifact definition.
An array of ProjectArtifacts objects.
Information about build output artifacts.
Information about the location of the build artifacts.
The SHA-256 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
The MD5 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
Information that tells you if encryption for build artifacts is disabled.
An identifier for this artifact definition.
Information about the cache for the build.
The type of cache used by the build project. Valid values include:
Information about the cache location:
If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.
Note
Information about the build environment for this build.
The type of build environment to use for related builds.
The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:
Information about the compute resources the build project uses. Available values include:
If you use BUILD_GENERAL1_LARGE :
For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.
A set of environment variables to make available to builds for this build project.
Information about an environment variable for a build project or a build.
The name or key of the environment variable.
The value of the environment variable.
Warning
We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .
The type of environment variable. Valid values include:
Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .
You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:
If the operating system's base image is Ubuntu Linux:
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&- timeout 15 sh -c "until docker info; do echo .; sleep 1; done"
If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&- timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
The certificate to use with this build project.
The credentials for access to a private registry.
The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current AWS Region.
The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.
The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:
When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.
The name of a service role used for this build.
Information about the build's logs in Amazon CloudWatch Logs.
The name of the Amazon CloudWatch Logs group for the build logs.
The name of the Amazon CloudWatch Logs stream for the build logs.
The URL to an individual build log in Amazon CloudWatch Logs.
The URL to a build log in an S3 bucket.
The ARN of Amazon CloudWatch Logs for a build project. Its format is arn:${Partition}:logs:${Region}:${Account}:log-group:${LogGroupName}:log-stream:${LogStreamName} . For more information, see Resources Defined by Amazon CloudWatch Logs .
The ARN of S3 logs for a build project. Its format is arn:${Partition}:s3:::${BucketName}/${ObjectName} . For more information, see Resources Defined by Amazon S3 .
Information about Amazon CloudWatch Logs for a build project.
The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:
The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
Information about S3 logs for a build project.
The current status of the S3 build logs. Valid values are:
The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .
Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.
How long, in minutes, for AWS CodeBuild to wait before timing out this build if it does not get marked as completed.
The number of minutes a build is allowed to be queued before it times out.
Whether the build is complete. True if complete; otherwise, false.
The entity that started the build. Valid values include:
If your AWS CodeBuild project accesses resources in an Amazon VPC, you provide this parameter that identifies the VPC ID and the list of security group IDs and subnet IDs. The security groups and subnets must belong to the same VPC. You must provide at least one security group and one subnet ID.
The ID of the Amazon VPC.
A list of one or more subnet IDs in your Amazon VPC.
A list of one or more security groups IDs in your Amazon VPC.
Describes a network interface.
The ID of the subnet.
The ID of the network interface.
The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.
Note
You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).
A list of exported environment variables for this build.
Information about an exported environment variable.
The name of this exported environment variable.
The value assigned to this exported environment variable.
Note
During a build, the value of a variable is available starting with the install phase. It can be updated between the start of the install phase and the end of the post_build phase. After the post_build phase ends, the value of exported variables cannot change.
An array of the ARNs associated with this build's reports.
An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.
Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?
The type of the file system. The one supported type is EFS .
A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .
The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.
The location in the container where you mount the file system.
The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .
The identifier is used to mount your file system.
The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .
The IDs of builds for which information could not be found.
Exceptions
Examples
The following example gets information about builds with the specified build IDs.
response = client.batch_get_builds(
ids=[
'codebuild-demo-project:9b0ac37f-d19e-4254-9079-f47e9a389eEX',
'codebuild-demo-project:b79a46f7-1473-4636-a23f-da9c45c208EX',
],
)
print(response)
Expected Output:
{
'builds': [
{
'arn': 'arn:aws:codebuild:us-east-1:123456789012:build/codebuild-demo-project:9b0ac37f-d19e-4254-9079-f47e9a389eEX',
'artifacts': {
'location': 'arn:aws:s3:::codebuild-123456789012-output-bucket/codebuild-demo-project',
},
'buildComplete': True,
'buildStatus': 'SUCCEEDED',
'currentPhase': 'COMPLETED',
'endTime': 1479832474.764,
'environment': {
'type': 'LINUX_CONTAINER',
'computeType': 'BUILD_GENERAL1_SMALL',
'environmentVariables': [
],
'image': 'aws/codebuild/java:openjdk-8',
'privilegedMode': False,
},
'id': 'codebuild-demo-project:9b0ac37f-d19e-4254-9079-f47e9a389eEX',
'initiator': 'MyDemoUser',
'logs': {
'deepLink': 'https://console.aws.amazon.com/cloudwatch/home?region=us-east-1#logEvent:group=/aws/codebuild/codebuild-demo-project;stream=9b0ac37f-d19e-4254-9079-f47e9a389eEX',
'groupName': '/aws/codebuild/codebuild-demo-project',
'streamName': '9b0ac37f-d19e-4254-9079-f47e9a389eEX',
},
'phases': [
{
'durationInSeconds': 0,
'endTime': 1479832342.23,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'SUBMITTED',
'startTime': 1479832341.854,
},
{
'contexts': [
],
'durationInSeconds': 72,
'endTime': 1479832415.064,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'PROVISIONING',
'startTime': 1479832342.23,
},
{
'contexts': [
],
'durationInSeconds': 46,
'endTime': 1479832461.261,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'DOWNLOAD_SOURCE',
'startTime': 1479832415.064,
},
{
'contexts': [
],
'durationInSeconds': 0,
'endTime': 1479832461.354,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'INSTALL',
'startTime': 1479832461.261,
},
{
'contexts': [
],
'durationInSeconds': 0,
'endTime': 1479832461.448,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'PRE_BUILD',
'startTime': 1479832461.354,
},
{
'contexts': [
],
'durationInSeconds': 9,
'endTime': 1479832471.115,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'BUILD',
'startTime': 1479832461.448,
},
{
'contexts': [
],
'durationInSeconds': 0,
'endTime': 1479832471.224,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'POST_BUILD',
'startTime': 1479832471.115,
},
{
'contexts': [
],
'durationInSeconds': 0,
'endTime': 1479832471.791,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'UPLOAD_ARTIFACTS',
'startTime': 1479832471.224,
},
{
'contexts': [
],
'durationInSeconds': 2,
'endTime': 1479832474.764,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'FINALIZING',
'startTime': 1479832471.791,
},
{
'phaseType': 'COMPLETED',
'startTime': 1479832474.764,
},
],
'projectName': 'codebuild-demo-project',
'source': {
'type': 'S3',
'buildspec': '',
'location': 'arn:aws:s3:::codebuild-123456789012-input-bucket/MessageUtil.zip',
},
'startTime': 1479832341.854,
'timeoutInMinutes': 60,
},
{
'arn': 'arn:aws:codebuild:us-east-1:123456789012:build/codebuild-demo-project:b79a46f7-1473-4636-a23f-da9c45c208EX',
'artifacts': {
'location': 'arn:aws:s3:::codebuild-123456789012-output-bucket/codebuild-demo-project',
},
'buildComplete': True,
'buildStatus': 'SUCCEEDED',
'currentPhase': 'COMPLETED',
'endTime': 1479401214.239,
'environment': {
'type': 'LINUX_CONTAINER',
'computeType': 'BUILD_GENERAL1_SMALL',
'environmentVariables': [
],
'image': 'aws/codebuild/java:openjdk-8',
'privilegedMode': False,
},
'id': 'codebuild-demo-project:b79a46f7-1473-4636-a23f-da9c45c208EX',
'initiator': 'MyDemoUser',
'logs': {
'deepLink': 'https://console.aws.amazon.com/cloudwatch/home?region=us-east-1#logEvent:group=/aws/codebuild/codebuild-demo-project;stream=b79a46f7-1473-4636-a23f-da9c45c208EX',
'groupName': '/aws/codebuild/codebuild-demo-project',
'streamName': 'b79a46f7-1473-4636-a23f-da9c45c208EX',
},
'phases': [
{
'durationInSeconds': 0,
'endTime': 1479401082.342,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'SUBMITTED',
'startTime': 1479401081.869,
},
{
'contexts': [
],
'durationInSeconds': 71,
'endTime': 1479401154.129,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'PROVISIONING',
'startTime': 1479401082.342,
},
{
'contexts': [
],
'durationInSeconds': 45,
'endTime': 1479401199.136,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'DOWNLOAD_SOURCE',
'startTime': 1479401154.129,
},
{
'contexts': [
],
'durationInSeconds': 0,
'endTime': 1479401199.236,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'INSTALL',
'startTime': 1479401199.136,
},
{
'contexts': [
],
'durationInSeconds': 0,
'endTime': 1479401199.345,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'PRE_BUILD',
'startTime': 1479401199.236,
},
{
'contexts': [
],
'durationInSeconds': 9,
'endTime': 1479401208.68,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'BUILD',
'startTime': 1479401199.345,
},
{
'contexts': [
],
'durationInSeconds': 0,
'endTime': 1479401208.783,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'POST_BUILD',
'startTime': 1479401208.68,
},
{
'contexts': [
],
'durationInSeconds': 0,
'endTime': 1479401209.463,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'UPLOAD_ARTIFACTS',
'startTime': 1479401208.783,
},
{
'contexts': [
],
'durationInSeconds': 4,
'endTime': 1479401214.239,
'phaseStatus': 'SUCCEEDED',
'phaseType': 'FINALIZING',
'startTime': 1479401209.463,
},
{
'phaseType': 'COMPLETED',
'startTime': 1479401214.239,
},
],
'projectName': 'codebuild-demo-project',
'source': {
'type': 'S3',
'location': 'arn:aws:s3:::codebuild-123456789012-input-bucket/MessageUtil.zip',
},
'startTime': 1479401081.869,
'timeoutInMinutes': 60,
},
],
'ResponseMetadata': {
'...': '...',
},
}
Gets information about one or more build projects.
See also: AWS API Documentation
Request Syntax
response = client.batch_get_projects(
names=[
'string',
]
)
[REQUIRED]
The names or ARNs of the build projects. To get information about a project shared with your AWS account, its ARN must be specified. You cannot specify a shared project using its name.
{
'projects': [
{
'name': 'string',
'arn': 'string',
'description': 'string',
'source': {
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
'secondarySources': [
{
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
],
'sourceVersion': 'string',
'secondarySourceVersions': [
{
'sourceIdentifier': 'string',
'sourceVersion': 'string'
},
],
'artifacts': {
'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
'location': 'string',
'path': 'string',
'namespaceType': 'NONE'|'BUILD_ID',
'name': 'string',
'packaging': 'NONE'|'ZIP',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
'secondaryArtifacts': [
{
'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
'location': 'string',
'path': 'string',
'namespaceType': 'NONE'|'BUILD_ID',
'name': 'string',
'packaging': 'NONE'|'ZIP',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
],
'cache': {
'type': 'NO_CACHE'|'S3'|'LOCAL',
'location': 'string',
'modes': [
'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
]
},
'environment': {
'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER',
'image': 'string',
'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
'environmentVariables': [
{
'name': 'string',
'value': 'string',
'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
},
],
'privilegedMode': True|False,
'certificate': 'string',
'registryCredential': {
'credential': 'string',
'credentialProvider': 'SECRETS_MANAGER'
},
'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
},
'serviceRole': 'string',
'timeoutInMinutes': 123,
'queuedTimeoutInMinutes': 123,
'encryptionKey': 'string',
'tags': [
{
'key': 'string',
'value': 'string'
},
],
'created': datetime(2015, 1, 1),
'lastModified': datetime(2015, 1, 1),
'webhook': {
'url': 'string',
'payloadUrl': 'string',
'secret': 'string',
'branchFilter': 'string',
'filterGroups': [
[
{
'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
'pattern': 'string',
'excludeMatchedPattern': True|False
},
],
],
'lastModifiedSecret': datetime(2015, 1, 1)
},
'vpcConfig': {
'vpcId': 'string',
'subnets': [
'string',
],
'securityGroupIds': [
'string',
]
},
'badge': {
'badgeEnabled': True|False,
'badgeRequestUrl': 'string'
},
'logsConfig': {
'cloudWatchLogs': {
'status': 'ENABLED'|'DISABLED',
'groupName': 'string',
'streamName': 'string'
},
's3Logs': {
'status': 'ENABLED'|'DISABLED',
'location': 'string',
'encryptionDisabled': True|False
}
},
'fileSystemLocations': [
{
'type': 'EFS',
'location': 'string',
'mountPoint': 'string',
'identifier': 'string',
'mountOptions': 'string'
},
]
},
],
'projectsNotFound': [
'string',
]
}
Response Structure
Information about the requested build projects.
Information about a build project.
The name of the build project.
The Amazon Resource Name (ARN) of the build project.
A description that makes the build project easy to identify.
Information about the build input source code for this build project.
The type of repository that contains the source code to be built. Valid values include:
Information about the location of the source code to be built. Valid values include:
Information about the Git clone depth for the build project.
Information about the Git submodules configuration for the build project.
Set to true to fetch Git submodules for your AWS CodeBuild build project.
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
The resource value that applies to the specified authorization type.
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
Enable this flag to ignore SSL warnings while connecting to the project source code.
An identifier for this project source.
An array of ProjectSource objects.
Information about the build input source code for the build project.
The type of repository that contains the source code to be built. Valid values include:
Information about the location of the source code to be built. Valid values include:
Information about the Git clone depth for the build project.
Information about the Git submodules configuration for the build project.
Set to true to fetch Git submodules for your AWS CodeBuild build project.
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
The resource value that applies to the specified authorization type.
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
Enable this flag to ignore SSL warnings while connecting to the project source code.
An identifier for this project source.
A version of the build input to be built for this project. If not specified, the latest version is used. If specified, it must be one of:
If sourceVersion is specified at the build level, then that version takes precedence over this sourceVersion (at the project level).
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
An array of ProjectSourceVersion objects. If secondarySourceVersions is specified at the build level, then they take over these secondarySourceVersions (at the project level).
A source identifier and its corresponding version.
An identifier for a source in the build project.
The source version for the corresponding source identifier. If specified, must be one of:
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
Information about the build output artifacts for the build project.
The type of build output artifact. Valid values include:
Note
The CODEPIPELINE type is not supported for secondaryArtifacts .
Information about the build output artifact location:
Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .
Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example:
The type of build output artifact to create:
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.
An identifier for this artifact definition.
An array of ProjectArtifacts objects.
Information about the build output artifacts for the build project.
The type of build output artifact. Valid values include:
Note
The CODEPIPELINE type is not supported for secondaryArtifacts .
Information about the build output artifact location:
Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .
Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example:
The type of build output artifact to create:
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.
An identifier for this artifact definition.
Information about the cache for the build project.
The type of cache used by the build project. Valid values include:
Information about the cache location:
If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.
Note
Information about the build environment for this build project.
The type of build environment to use for related builds.
The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:
Information about the compute resources the build project uses. Available values include:
If you use BUILD_GENERAL1_LARGE :
For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.
A set of environment variables to make available to builds for this build project.
Information about an environment variable for a build project or a build.
The name or key of the environment variable.
The value of the environment variable.
Warning
We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .
The type of environment variable. Valid values include:
Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .
You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:
If the operating system's base image is Ubuntu Linux:
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&- timeout 15 sh -c "until docker info; do echo .; sleep 1; done"
If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&- timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
The certificate to use with this build project.
The credentials for access to a private registry.
The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current AWS Region.
The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.
The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:
When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.
The ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait before timing out any related build that did not get marked as completed. The default is 60 minutes.
The number of minutes a build is allowed to be queued before it times out.
The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.
Note
You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).
A list of tag key and value pairs associated with this build project.
These tags are available for use by AWS services that support AWS CodeBuild build project tags.
A tag, consisting of a key and a value.
This tag is available for use by AWS services that support tags in AWS CodeBuild.
The tag's key.
The tag's value.
When the build project was created, expressed in Unix time format.
When the build project's settings were last modified, expressed in Unix time format.
Information about a webhook that connects repository events to a build project in AWS CodeBuild.
The URL to the webhook.
The AWS CodeBuild endpoint where webhook events are sent.
The secret token of the associated repository.
Note
A Bitbucket webhook does not support secret .
A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.
Note
It is recommended that you use filterGroups instead of branchFilter .
An array of arrays of WebhookFilter objects used to determine which webhooks are triggered. At least one WebhookFilter in the array must specify EVENT as its type .
For a build to be triggered, at least one filter group in the filterGroups array must pass. For a filter group to pass, each of its filters must pass.
A filter used to determine which webhooks trigger a build.
The type of webhook filter. There are five webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , and FILE_PATH .
EVENT
A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.
Note
The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.
ACTOR_ACCOUNT_ID
A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .
HEAD_REF
A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .
Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.
BASE_REF
A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .
Note
Works with pull request events only.
FILE_PATH
A webhook triggers a build when the path of a changed file matches the regular expression pattern .
Note
Works with GitHub and GitHub Enterprise push events only.
For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.
For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .
Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.
A timestamp that indicates the last time a repository's secret token was modified.
Information about the VPC configuration that AWS CodeBuild accesses.
The ID of the Amazon VPC.
A list of one or more subnet IDs in your Amazon VPC.
A list of one or more security groups IDs in your Amazon VPC.
Information about the build badge for the build project.
Set this to true to generate a publicly accessible URL for your project's build badge.
The publicly-accessible URL through which you can access the build badge for your project.
The publicly accessible URL through which you can access the build badge for your project.
Information about logs for the build project. A project can create logs in Amazon CloudWatch Logs, an S3 bucket, or both.
Information about Amazon CloudWatch Logs for a build project. Amazon CloudWatch Logs are enabled by default.
The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:
The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
Information about logs built to an S3 bucket for a build project. S3 logs are not enabled by default.
The current status of the S3 build logs. Valid values are:
The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .
Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.
An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.
Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?
The type of the file system. The one supported type is EFS .
A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .
The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.
The location in the container where you mount the file system.
The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .
The identifier is used to mount your file system.
The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .
The names of build projects for which information could not be found.
Exceptions
Returns an array of report groups.
See also: AWS API Documentation
Request Syntax
response = client.batch_get_report_groups(
reportGroupArns=[
'string',
]
)
[REQUIRED]
An array of report group ARNs that identify the report groups to return.
{
'reportGroups': [
{
'arn': 'string',
'name': 'string',
'type': 'TEST',
'exportConfig': {
'exportConfigType': 'S3'|'NO_EXPORT',
's3Destination': {
'bucket': 'string',
'path': 'string',
'packaging': 'ZIP'|'NONE',
'encryptionKey': 'string',
'encryptionDisabled': True|False
}
},
'created': datetime(2015, 1, 1),
'lastModified': datetime(2015, 1, 1),
'tags': [
{
'key': 'string',
'value': 'string'
},
]
},
],
'reportGroupsNotFound': [
'string',
]
}
Response Structure
The array of report groups returned by BatchGetReportGroups .
A series of reports. Each report contains information about the results from running a series of test cases. You specify the test cases for a report group in the buildspec for a build project using one or more paths to the test case files.
The ARN of a ReportGroup .
The name of a ReportGroup .
The type of the ReportGroup . The one valid value is TEST .
Information about the destination where the raw data of this ReportGroup is exported.
The export configuration type. Valid values are:
A S3ReportExportConfig object that contains information about the S3 bucket where the run of a report is exported.
The name of the S3 bucket where the raw data of a report are exported.
The path to the exported report's raw data results.
The type of build output artifact to create. Valid values include:
The encryption key for the report's encrypted raw data.
A boolean value that specifies if the results of a report are encrypted.
The date and time this ReportGroup was created.
The date and time this ReportGroup was last modified.
A list of tag key and value pairs associated with this report group.
These tags are available for use by AWS services that support AWS CodeBuild report group tags.
A tag, consisting of a key and a value.
This tag is available for use by AWS services that support tags in AWS CodeBuild.
The tag's key.
The tag's value.
An array of ARNs passed to BatchGetReportGroups that are not associated with a ReportGroup .
Exceptions
Returns an array of reports.
See also: AWS API Documentation
Request Syntax
response = client.batch_get_reports(
reportArns=[
'string',
]
)
[REQUIRED]
An array of ARNs that identify the Report objects to return.
{
'reports': [
{
'arn': 'string',
'type': 'TEST',
'name': 'string',
'reportGroupArn': 'string',
'executionId': 'string',
'status': 'GENERATING'|'SUCCEEDED'|'FAILED'|'INCOMPLETE'|'DELETING',
'created': datetime(2015, 1, 1),
'expired': datetime(2015, 1, 1),
'exportConfig': {
'exportConfigType': 'S3'|'NO_EXPORT',
's3Destination': {
'bucket': 'string',
'path': 'string',
'packaging': 'ZIP'|'NONE',
'encryptionKey': 'string',
'encryptionDisabled': True|False
}
},
'truncated': True|False,
'testSummary': {
'total': 123,
'statusCounts': {
'string': 123
},
'durationInNanoSeconds': 123
}
},
],
'reportsNotFound': [
'string',
]
}
Response Structure
The array of Report objects returned by BatchGetReports .
Information about the results from running a series of test cases during the run of a build project. The test cases are specified in the buildspec for the build project using one or more paths to the test case files. You can specify any type of tests you want, such as unit tests, integration tests, and functional tests.
The ARN of the report run.
The type of the report that was run.
The name of the report that was run.
The ARN of the report group associated with this report.
The ARN of the build run that generated this report.
The status of this report.
The date and time this report run occurred.
The date and time a report expires. A report expires 30 days after it is created. An expired report is not available to view in CodeBuild.
Information about where the raw data used to generate this report was exported.
The export configuration type. Valid values are:
A S3ReportExportConfig object that contains information about the S3 bucket where the run of a report is exported.
The name of the S3 bucket where the raw data of a report are exported.
The path to the exported report's raw data results.
The type of build output artifact to create. Valid values include:
The encryption key for the report's encrypted raw data.
A boolean value that specifies if the results of a report are encrypted.
A boolean that specifies if this report run is truncated. The list of test cases is truncated after the maximum number of test cases is reached.
A TestReportSummary object that contains information about this test report.
The number of test cases in this TestReportSummary . The total includes truncated test cases.
A map that contains the number of each type of status returned by the test results in this TestReportSummary .
The number of nanoseconds it took to run all of the test cases in this report.
An array of ARNs passed to BatchGetReportGroups that are not associated with a Report .
Exceptions
Check if an operation can be paginated.
Creates a build project.
See also: AWS API Documentation
Request Syntax
response = client.create_project(
name='string',
description='string',
source={
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
secondarySources=[
{
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
],
sourceVersion='string',
secondarySourceVersions=[
{
'sourceIdentifier': 'string',
'sourceVersion': 'string'
},
],
artifacts={
'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
'location': 'string',
'path': 'string',
'namespaceType': 'NONE'|'BUILD_ID',
'name': 'string',
'packaging': 'NONE'|'ZIP',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
secondaryArtifacts=[
{
'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
'location': 'string',
'path': 'string',
'namespaceType': 'NONE'|'BUILD_ID',
'name': 'string',
'packaging': 'NONE'|'ZIP',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
],
cache={
'type': 'NO_CACHE'|'S3'|'LOCAL',
'location': 'string',
'modes': [
'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
]
},
environment={
'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER',
'image': 'string',
'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
'environmentVariables': [
{
'name': 'string',
'value': 'string',
'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
},
],
'privilegedMode': True|False,
'certificate': 'string',
'registryCredential': {
'credential': 'string',
'credentialProvider': 'SECRETS_MANAGER'
},
'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
},
serviceRole='string',
timeoutInMinutes=123,
queuedTimeoutInMinutes=123,
encryptionKey='string',
tags=[
{
'key': 'string',
'value': 'string'
},
],
vpcConfig={
'vpcId': 'string',
'subnets': [
'string',
],
'securityGroupIds': [
'string',
]
},
badgeEnabled=True|False,
logsConfig={
'cloudWatchLogs': {
'status': 'ENABLED'|'DISABLED',
'groupName': 'string',
'streamName': 'string'
},
's3Logs': {
'status': 'ENABLED'|'DISABLED',
'location': 'string',
'encryptionDisabled': True|False
}
},
fileSystemLocations=[
{
'type': 'EFS',
'location': 'string',
'mountPoint': 'string',
'identifier': 'string',
'mountOptions': 'string'
},
]
)
[REQUIRED]
The name of the build project.
[REQUIRED]
Information about the build input source code for the build project.
The type of repository that contains the source code to be built. Valid values include:
Information about the location of the source code to be built. Valid values include:
Information about the Git clone depth for the build project.
Information about the Git submodules configuration for the build project.
Set to true to fetch Git submodules for your AWS CodeBuild build project.
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
The resource value that applies to the specified authorization type.
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
Enable this flag to ignore SSL warnings while connecting to the project source code.
An identifier for this project source.
An array of ProjectSource objects.
Information about the build input source code for the build project.
The type of repository that contains the source code to be built. Valid values include:
Information about the location of the source code to be built. Valid values include:
Information about the Git clone depth for the build project.
Information about the Git submodules configuration for the build project.
Set to true to fetch Git submodules for your AWS CodeBuild build project.
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
The resource value that applies to the specified authorization type.
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
Enable this flag to ignore SSL warnings while connecting to the project source code.
An identifier for this project source.
A version of the build input to be built for this project. If not specified, the latest version is used. If specified, it must be one of:
If sourceVersion is specified at the build level, then that version takes precedence over this sourceVersion (at the project level).
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
An array of ProjectSourceVersion objects. If secondarySourceVersions is specified at the build level, then they take precedence over these secondarySourceVersions (at the project level).
A source identifier and its corresponding version.
An identifier for a source in the build project.
The source version for the corresponding source identifier. If specified, must be one of:
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
[REQUIRED]
Information about the build output artifacts for the build project.
The type of build output artifact. Valid values include:
Note
The CODEPIPELINE type is not supported for secondaryArtifacts .
Information about the build output artifact location:
Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .
Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example:
The type of build output artifact to create:
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.
An identifier for this artifact definition.
An array of ProjectArtifacts objects.
Information about the build output artifacts for the build project.
The type of build output artifact. Valid values include:
Note
The CODEPIPELINE type is not supported for secondaryArtifacts .
Information about the build output artifact location:
Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .
Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example:
The type of build output artifact to create:
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.
An identifier for this artifact definition.
Stores recently used information so that it can be quickly accessed at a later time.
The type of cache used by the build project. Valid values include:
Information about the cache location:
If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.
Note
[REQUIRED]
Information about the build environment for the build project.
The type of build environment to use for related builds.
The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:
Information about the compute resources the build project uses. Available values include:
If you use BUILD_GENERAL1_LARGE :
For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.
A set of environment variables to make available to builds for this build project.
Information about an environment variable for a build project or a build.
The name or key of the environment variable.
The value of the environment variable.
Warning
We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .
The type of environment variable. Valid values include:
Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .
You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:
If the operating system's base image is Ubuntu Linux:
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&- timeout 15 sh -c "until docker info; do echo .; sleep 1; done"
If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&- timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
The certificate to use with this build project.
The credentials for access to a private registry.
The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current AWS Region.
The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.
The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:
When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.
[REQUIRED]
The ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.
Note
You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).
A list of tag key and value pairs associated with this build project.
These tags are available for use by AWS services that support AWS CodeBuild build project tags.
A tag, consisting of a key and a value.
This tag is available for use by AWS services that support tags in AWS CodeBuild.
The tag's key.
The tag's value.
VpcConfig enables AWS CodeBuild to access resources in an Amazon VPC.
The ID of the Amazon VPC.
A list of one or more subnet IDs in your Amazon VPC.
A list of one or more security groups IDs in your Amazon VPC.
Information about logs for the build project. These can be logs in Amazon CloudWatch Logs, logs uploaded to a specified S3 bucket, or both.
Information about Amazon CloudWatch Logs for a build project. Amazon CloudWatch Logs are enabled by default.
The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:
The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
Information about logs built to an S3 bucket for a build project. S3 logs are not enabled by default.
The current status of the S3 build logs. Valid values are:
The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .
Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.
An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.
Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?
The type of the file system. The one supported type is EFS .
A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .
The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.
The location in the container where you mount the file system.
The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .
The identifier is used to mount your file system.
The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .
dict
Response Syntax
{
'project': {
'name': 'string',
'arn': 'string',
'description': 'string',
'source': {
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
'secondarySources': [
{
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
],
'sourceVersion': 'string',
'secondarySourceVersions': [
{
'sourceIdentifier': 'string',
'sourceVersion': 'string'
},
],
'artifacts': {
'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
'location': 'string',
'path': 'string',
'namespaceType': 'NONE'|'BUILD_ID',
'name': 'string',
'packaging': 'NONE'|'ZIP',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
'secondaryArtifacts': [
{
'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
'location': 'string',
'path': 'string',
'namespaceType': 'NONE'|'BUILD_ID',
'name': 'string',
'packaging': 'NONE'|'ZIP',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
],
'cache': {
'type': 'NO_CACHE'|'S3'|'LOCAL',
'location': 'string',
'modes': [
'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
]
},
'environment': {
'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER',
'image': 'string',
'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
'environmentVariables': [
{
'name': 'string',
'value': 'string',
'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
},
],
'privilegedMode': True|False,
'certificate': 'string',
'registryCredential': {
'credential': 'string',
'credentialProvider': 'SECRETS_MANAGER'
},
'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
},
'serviceRole': 'string',
'timeoutInMinutes': 123,
'queuedTimeoutInMinutes': 123,
'encryptionKey': 'string',
'tags': [
{
'key': 'string',
'value': 'string'
},
],
'created': datetime(2015, 1, 1),
'lastModified': datetime(2015, 1, 1),
'webhook': {
'url': 'string',
'payloadUrl': 'string',
'secret': 'string',
'branchFilter': 'string',
'filterGroups': [
[
{
'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
'pattern': 'string',
'excludeMatchedPattern': True|False
},
],
],
'lastModifiedSecret': datetime(2015, 1, 1)
},
'vpcConfig': {
'vpcId': 'string',
'subnets': [
'string',
],
'securityGroupIds': [
'string',
]
},
'badge': {
'badgeEnabled': True|False,
'badgeRequestUrl': 'string'
},
'logsConfig': {
'cloudWatchLogs': {
'status': 'ENABLED'|'DISABLED',
'groupName': 'string',
'streamName': 'string'
},
's3Logs': {
'status': 'ENABLED'|'DISABLED',
'location': 'string',
'encryptionDisabled': True|False
}
},
'fileSystemLocations': [
{
'type': 'EFS',
'location': 'string',
'mountPoint': 'string',
'identifier': 'string',
'mountOptions': 'string'
},
]
}
}
Response Structure
(dict) --
project (dict) --
Information about the build project that was created.
name (string) --
The name of the build project.
arn (string) --
The Amazon Resource Name (ARN) of the build project.
description (string) --
A description that makes the build project easy to identify.
source (dict) --
Information about the build input source code for this build project.
type (string) --
The type of repository that contains the source code to be built. Valid values include:
location (string) --
Information about the location of the source code to be built. Valid values include:
gitCloneDepth (integer) --
Information about the Git clone depth for the build project.
gitSubmodulesConfig (dict) --
Information about the Git submodules configuration for the build project.
fetchSubmodules (boolean) --
Set to true to fetch Git submodules for your AWS CodeBuild build project.
buildspec (string) --
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
auth (dict) --
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
type (string) --
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
resource (string) --
The resource value that applies to the specified authorization type.
reportBuildStatus (boolean) --
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
insecureSsl (boolean) --
Enable this flag to ignore SSL warnings while connecting to the project source code.
sourceIdentifier (string) --
An identifier for this project source.
secondarySources (list) --
An array of ProjectSource objects.
(dict) --
Information about the build input source code for the build project.
type (string) --
The type of repository that contains the source code to be built. Valid values include:
location (string) --
Information about the location of the source code to be built. Valid values include:
gitCloneDepth (integer) --
Information about the Git clone depth for the build project.
gitSubmodulesConfig (dict) --
Information about the Git submodules configuration for the build project.
fetchSubmodules (boolean) --
Set to true to fetch Git submodules for your AWS CodeBuild build project.
buildspec (string) --
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
auth (dict) --
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
type (string) --
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
resource (string) --
The resource value that applies to the specified authorization type.
reportBuildStatus (boolean) --
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
insecureSsl (boolean) --
Enable this flag to ignore SSL warnings while connecting to the project source code.
sourceIdentifier (string) --
An identifier for this project source.
sourceVersion (string) --
A version of the build input to be built for this project. If not specified, the latest version is used. If specified, it must be one of:
If sourceVersion is specified at the build level, then that version takes precedence over this sourceVersion (at the project level).
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
secondarySourceVersions (list) --
An array of ProjectSourceVersion objects. If secondarySourceVersions is specified at the build level, then they take over these secondarySourceVersions (at the project level).
(dict) --
A source identifier and its corresponding version.
sourceIdentifier (string) --
An identifier for a source in the build project.
sourceVersion (string) --
The source version for the corresponding source identifier. If specified, must be one of:
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
artifacts (dict) --
Information about the build output artifacts for the build project.
type (string) --
The type of build output artifact. Valid values include:
Note
The CODEPIPELINE type is not supported for secondaryArtifacts .
location (string) --
Information about the build output artifact location:
path (string) --
Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .
namespaceType (string) --
Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
name (string) --
Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example:
packaging (string) --
The type of build output artifact to create:
overrideArtifactName (boolean) --
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
encryptionDisabled (boolean) --
Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.
artifactIdentifier (string) --
An identifier for this artifact definition.
secondaryArtifacts (list) --
An array of ProjectArtifacts objects.
(dict) --
Information about the build output artifacts for the build project.
type (string) --
The type of build output artifact. Valid values include:
Note
The CODEPIPELINE type is not supported for secondaryArtifacts .
location (string) --
Information about the build output artifact location:
path (string) --
Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .
namespaceType (string) --
Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
name (string) --
Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example:
packaging (string) --
The type of build output artifact to create:
overrideArtifactName (boolean) --
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
encryptionDisabled (boolean) --
Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.
artifactIdentifier (string) --
An identifier for this artifact definition.
cache (dict) --
Information about the cache for the build project.
type (string) --
The type of cache used by the build project. Valid values include:
location (string) --
Information about the cache location:
modes (list) --
If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.
Note
environment (dict) --
Information about the build environment for this build project.
type (string) --
The type of build environment to use for related builds.
image (string) --
The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:
computeType (string) --
Information about the compute resources the build project uses. Available values include:
If you use BUILD_GENERAL1_LARGE :
For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.
environmentVariables (list) --
A set of environment variables to make available to builds for this build project.
(dict) --
Information about an environment variable for a build project or a build.
name (string) --
The name or key of the environment variable.
value (string) --
The value of the environment variable.
Warning
We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .
type (string) --
The type of environment variable. Valid values include:
privilegedMode (boolean) --
Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .
You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:
If the operating system's base image is Ubuntu Linux:
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&
- timeout 15 sh -c "until docker info; do echo .; sleep 1; done"
If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&
- timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
certificate (string) --
The certificate to use with this build project.
registryCredential (dict) --
The credentials for access to a private registry.
credential (string) --
The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current AWS Region.
credentialProvider (string) --
The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.
imagePullCredentialsType (string) --
The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:
When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.
serviceRole (string) --
The ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
timeoutInMinutes (integer) --
How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait before timing out any related build that did not get marked as completed. The default is 60 minutes.
queuedTimeoutInMinutes (integer) --
The number of minutes a build is allowed to be queued before it times out.
encryptionKey (string) --
The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.
Note
You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).
tags (list) --
A list of tag key and value pairs associated with this build project.
These tags are available for use by AWS services that support AWS CodeBuild build project tags.
(dict) --
A tag, consisting of a key and a value.
This tag is available for use by AWS services that support tags in AWS CodeBuild.
key (string) --
The tag's key.
value (string) --
The tag's value.
created (datetime) --
When the build project was created, expressed in Unix time format.
lastModified (datetime) --
When the build project's settings were last modified, expressed in Unix time format.
webhook (dict) --
Information about a webhook that connects repository events to a build project in AWS CodeBuild.
url (string) --
The URL to the webhook.
payloadUrl (string) --
The AWS CodeBuild endpoint where webhook events are sent.
secret (string) --
The secret token of the associated repository.
Note
A Bitbucket webhook does not support secret .
branchFilter (string) --
A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.
Note
It is recommended that you use filterGroups instead of branchFilter .
filterGroups (list) --
An array of arrays of WebhookFilter objects used to determine which webhooks are triggered. At least one WebhookFilter in the array must specify EVENT as its type .
For a build to be triggered, at least one filter group in the filterGroups array must pass. For a filter group to pass, each of its filters must pass.
(list) --
(dict) --
A filter used to determine which webhooks trigger a build.
type (string) --
The type of webhook filter. There are five webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , and FILE_PATH .
EVENT
A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.
Note
The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.
ACTOR_ACCOUNT_ID
A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .
HEAD_REF
A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .
Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.
BASE_REF
A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .
Note
Works with pull request events only.
FILE_PATH
A webhook triggers a build when the path of a changed file matches the regular expression pattern .
Note
Works with GitHub and GitHub Enterprise push events only.
pattern (string) --
For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.
For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .
excludeMatchedPattern (boolean) --
Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.
lastModifiedSecret (datetime) --
A timestamp that indicates the last time a repository's secret token was modified.
vpcConfig (dict) --
Information about the VPC configuration that AWS CodeBuild accesses.
vpcId (string) --
The ID of the Amazon VPC.
subnets (list) --
A list of one or more subnet IDs in your Amazon VPC.
securityGroupIds (list) --
A list of one or more security groups IDs in your Amazon VPC.
badge (dict) --
Information about the build badge for the build project.
badgeEnabled (boolean) --
Set this to true to generate a publicly accessible URL for your project's build badge.
badgeRequestUrl (string) --
The publicly-accessible URL through which you can access the build badge for your project.
The publicly accessible URL through which you can access the build badge for your project.
logsConfig (dict) --
Information about logs for the build project. A project can create logs in Amazon CloudWatch Logs, an S3 bucket, or both.
cloudWatchLogs (dict) --
Information about Amazon CloudWatch Logs for a build project. Amazon CloudWatch Logs are enabled by default.
status (string) --
The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:
groupName (string) --
The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
streamName (string) --
The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
s3Logs (dict) --
Information about logs built to an S3 bucket for a build project. S3 logs are not enabled by default.
status (string) --
The current status of the S3 build logs. Valid values are:
location (string) --
The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .
encryptionDisabled (boolean) --
Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.
fileSystemLocations (list) --
An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.
(dict) --
Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?
type (string) --
The type of the file system. The one supported type is EFS .
location (string) --
A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .
The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.
mountPoint (string) --
The location in the container where you mount the file system.
identifier (string) --
The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .
The identifier is used to mount your file system.
mountOptions (string) --
The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .
Exceptions
Creates a report group. A report group contains a collection of reports.
See also: AWS API Documentation
Request Syntax
response = client.create_report_group(
name='string',
type='TEST',
exportConfig={
'exportConfigType': 'S3'|'NO_EXPORT',
's3Destination': {
'bucket': 'string',
'path': 'string',
'packaging': 'ZIP'|'NONE',
'encryptionKey': 'string',
'encryptionDisabled': True|False
}
},
tags=[
{
'key': 'string',
'value': 'string'
},
]
)
[REQUIRED]
The name of the report group.
[REQUIRED]
The type of report group.
[REQUIRED]
A ReportExportConfig object that contains information about where the report group test results are exported.
The export configuration type. Valid values are:
A S3ReportExportConfig object that contains information about the S3 bucket where the run of a report is exported.
The name of the S3 bucket where the raw data of a report are exported.
The path to the exported report's raw data results.
The type of build output artifact to create. Valid values include:
The encryption key for the report's encrypted raw data.
A boolean value that specifies if the results of a report are encrypted.
A list of tag key and value pairs associated with this report group.
These tags are available for use by AWS services that support AWS CodeBuild report group tags.
A tag, consisting of a key and a value.
This tag is available for use by AWS services that support tags in AWS CodeBuild.
The tag's key.
The tag's value.
dict
Response Syntax
{
'reportGroup': {
'arn': 'string',
'name': 'string',
'type': 'TEST',
'exportConfig': {
'exportConfigType': 'S3'|'NO_EXPORT',
's3Destination': {
'bucket': 'string',
'path': 'string',
'packaging': 'ZIP'|'NONE',
'encryptionKey': 'string',
'encryptionDisabled': True|False
}
},
'created': datetime(2015, 1, 1),
'lastModified': datetime(2015, 1, 1),
'tags': [
{
'key': 'string',
'value': 'string'
},
]
}
}
Response Structure
(dict) --
reportGroup (dict) --
Information about the report group that was created.
arn (string) --
The ARN of a ReportGroup .
name (string) --
The name of a ReportGroup .
type (string) --
The type of the ReportGroup . The one valid value is TEST .
exportConfig (dict) --
Information about the destination where the raw data of this ReportGroup is exported.
exportConfigType (string) --
The export configuration type. Valid values are:
s3Destination (dict) --
A S3ReportExportConfig object that contains information about the S3 bucket where the run of a report is exported.
bucket (string) --
The name of the S3 bucket where the raw data of a report are exported.
path (string) --
The path to the exported report's raw data results.
packaging (string) --
The type of build output artifact to create. Valid values include:
encryptionKey (string) --
The encryption key for the report's encrypted raw data.
encryptionDisabled (boolean) --
A boolean value that specifies if the results of a report are encrypted.
created (datetime) --
The date and time this ReportGroup was created.
lastModified (datetime) --
The date and time this ReportGroup was last modified.
tags (list) --
A list of tag key and value pairs associated with this report group.
These tags are available for use by AWS services that support AWS CodeBuild report group tags.
(dict) --
A tag, consisting of a key and a value.
This tag is available for use by AWS services that support tags in AWS CodeBuild.
key (string) --
The tag's key.
value (string) --
The tag's value.
Exceptions
For an existing AWS CodeBuild build project that has its source code stored in a GitHub or Bitbucket repository, enables AWS CodeBuild to start rebuilding the source code every time a code change is pushed to the repository.
Warning
If you enable webhooks for an AWS CodeBuild project, and the project is used as a build step in AWS CodePipeline, then two identical builds are created for each commit. One build is triggered through webhooks, and one through AWS CodePipeline. Because billing is on a per-build basis, you are billed for both builds. Therefore, if you are using AWS CodePipeline, we recommend that you disable webhooks in AWS CodeBuild. In the AWS CodeBuild console, clear the Webhook box. For more information, see step 5 in Change a Build Project's Settings .
See also: AWS API Documentation
Request Syntax
response = client.create_webhook(
projectName='string',
branchFilter='string',
filterGroups=[
[
{
'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
'pattern': 'string',
'excludeMatchedPattern': True|False
},
],
]
)
[REQUIRED]
The name of the AWS CodeBuild project.
A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.
Note
It is recommended that you use filterGroups instead of branchFilter .
An array of arrays of WebhookFilter objects used to determine which webhooks are triggered. At least one WebhookFilter in the array must specify EVENT as its type .
For a build to be triggered, at least one filter group in the filterGroups array must pass. For a filter group to pass, each of its filters must pass.
A filter used to determine which webhooks trigger a build.
The type of webhook filter. There are five webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , and FILE_PATH .
EVENT
A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.
Note
The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.
ACTOR_ACCOUNT_ID
A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .
HEAD_REF
A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .
Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.
BASE_REF
A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .
Note
Works with pull request events only.
FILE_PATH
A webhook triggers a build when the path of a changed file matches the regular expression pattern .
Note
Works with GitHub and GitHub Enterprise push events only.
For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.
For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .
Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.
dict
Response Syntax
{
'webhook': {
'url': 'string',
'payloadUrl': 'string',
'secret': 'string',
'branchFilter': 'string',
'filterGroups': [
[
{
'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
'pattern': 'string',
'excludeMatchedPattern': True|False
},
],
],
'lastModifiedSecret': datetime(2015, 1, 1)
}
}
Response Structure
(dict) --
webhook (dict) --
Information about a webhook that connects repository events to a build project in AWS CodeBuild.
url (string) --
The URL to the webhook.
payloadUrl (string) --
The AWS CodeBuild endpoint where webhook events are sent.
secret (string) --
The secret token of the associated repository.
Note
A Bitbucket webhook does not support secret .
branchFilter (string) --
A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.
Note
It is recommended that you use filterGroups instead of branchFilter .
filterGroups (list) --
An array of arrays of WebhookFilter objects used to determine which webhooks are triggered. At least one WebhookFilter in the array must specify EVENT as its type .
For a build to be triggered, at least one filter group in the filterGroups array must pass. For a filter group to pass, each of its filters must pass.
(list) --
(dict) --
A filter used to determine which webhooks trigger a build.
type (string) --
The type of webhook filter. There are five webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , and FILE_PATH .
EVENT
A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.
Note
The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.
ACTOR_ACCOUNT_ID
A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .
HEAD_REF
A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .
Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.
BASE_REF
A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .
Note
Works with pull request events only.
FILE_PATH
A webhook triggers a build when the path of a changed file matches the regular expression pattern .
Note
Works with GitHub and GitHub Enterprise push events only.
pattern (string) --
For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.
For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .
excludeMatchedPattern (boolean) --
Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.
lastModifiedSecret (datetime) --
A timestamp that indicates the last time a repository's secret token was modified.
Exceptions
Deletes a build project. When you delete a project, its builds are not deleted.
See also: AWS API Documentation
Request Syntax
response = client.delete_project(
name='string'
)
[REQUIRED]
The name of the build project.
{}
Response Structure
Exceptions
Deletes a report.
See also: AWS API Documentation
Request Syntax
response = client.delete_report(
arn='string'
)
[REQUIRED]
The ARN of the report to delete.
{}
Response Structure
Exceptions
DeleteReportGroup : Deletes a report group. Before you delete a report group, you must delete its reports. Use ListReportsForReportGroup to get the reports in a report group. Use DeleteReport to delete the reports. If you call DeleteReportGroup for a report group that contains one or more reports, an exception is thrown.
See also: AWS API Documentation
Request Syntax
response = client.delete_report_group(
arn='string'
)
[REQUIRED]
The ARN of the report group to delete.
{}
Response Structure
Exceptions
Deletes a resource policy that is identified by its resource ARN.
See also: AWS API Documentation
Request Syntax
response = client.delete_resource_policy(
resourceArn='string'
)
[REQUIRED]
The ARN of the resource that is associated with the resource policy.
{}
Response Structure
Exceptions
Deletes a set of GitHub, GitHub Enterprise, or Bitbucket source credentials.
See also: AWS API Documentation
Request Syntax
response = client.delete_source_credentials(
arn='string'
)
[REQUIRED]
The Amazon Resource Name (ARN) of the token.
{
'arn': 'string'
}
Response Structure
The Amazon Resource Name (ARN) of the token.
Exceptions
For an existing AWS CodeBuild build project that has its source code stored in a GitHub or Bitbucket repository, stops AWS CodeBuild from rebuilding the source code every time a code change is pushed to the repository.
See also: AWS API Documentation
Request Syntax
response = client.delete_webhook(
projectName='string'
)
[REQUIRED]
The name of the AWS CodeBuild project.
{}
Response Structure
Exceptions
Returns a list of details about test cases for a report.
See also: AWS API Documentation
Request Syntax
response = client.describe_test_cases(
reportArn='string',
nextToken='string',
maxResults=123,
filter={
'status': 'string'
}
)
[REQUIRED]
The ARN of the report for which test cases are returned.
A TestCaseFilter object used to filter the returned reports.
The status used to filter test cases. Valid statuses are SUCCEEDED , FAILED , ERROR , SKIPPED , and UNKNOWN . A TestCaseFilter can have one status.
dict
Response Syntax
{
'nextToken': 'string',
'testCases': [
{
'reportArn': 'string',
'testRawDataPath': 'string',
'prefix': 'string',
'name': 'string',
'status': 'string',
'durationInNanoSeconds': 123,
'message': 'string',
'expired': datetime(2015, 1, 1)
},
]
}
Response Structure
(dict) --
nextToken (string) --
During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
testCases (list) --
The returned list of test cases.
(dict) --
Information about a test case created using a framework such as NUnit or Cucumber. A test case might be a unit test or a configuration test.
reportArn (string) --
The ARN of the report to which the test case belongs.
testRawDataPath (string) --
The path to the raw data file that contains the test result.
prefix (string) --
A string that is applied to a series of related test cases. CodeBuild generates the prefix. The prefix depends on the framework used to generate the tests.
name (string) --
The name of the test case.
status (string) --
The status returned by the test case after it was run. Valid statuses are SUCCEEDED , FAILED , ERROR , SKIPPED , and UNKNOWN .
durationInNanoSeconds (integer) --
The number of nanoseconds it took to run this test case.
message (string) --
A message associated with a test case. For example, an error message or stack trace.
expired (datetime) --
The date and time a test case expires. A test case expires 30 days after it is created. An expired test case is not available to view in CodeBuild.
Exceptions
Generate a presigned url given a client, its method, and arguments
The presigned url
Create a paginator for an operation.
Gets a resource policy that is identified by its resource ARN.
See also: AWS API Documentation
Request Syntax
response = client.get_resource_policy(
resourceArn='string'
)
[REQUIRED]
The ARN of the resource that is associated with the resource policy.
{
'policy': 'string'
}
Response Structure
The resource policy for the resource identified by the input ARN parameter.
Exceptions
Returns an object that can wait for some condition.
Imports the source repository credentials for an AWS CodeBuild project that has its source code stored in a GitHub, GitHub Enterprise, or Bitbucket repository.
See also: AWS API Documentation
Request Syntax
response = client.import_source_credentials(
username='string',
token='string',
serverType='GITHUB'|'BITBUCKET'|'GITHUB_ENTERPRISE',
authType='OAUTH'|'BASIC_AUTH'|'PERSONAL_ACCESS_TOKEN',
shouldOverwrite=True|False
)
[REQUIRED]
For GitHub or GitHub Enterprise, this is the personal access token. For Bitbucket, this is the app password.
[REQUIRED]
The source provider used for this project.
[REQUIRED]
The type of authentication used to connect to a GitHub, GitHub Enterprise, or Bitbucket repository. An OAUTH connection is not supported by the API and must be created using the AWS CodeBuild console.
dict
Response Syntax
{
'arn': 'string'
}
Response Structure
(dict) --
arn (string) --
The Amazon Resource Name (ARN) of the token.
Exceptions
Resets the cache for a project.
See also: AWS API Documentation
Request Syntax
response = client.invalidate_project_cache(
projectName='string'
)
[REQUIRED]
The name of the AWS CodeBuild build project that the cache is reset for.
{}
Response Structure
Exceptions
Gets a list of build IDs, with each build ID representing a single build.
See also: AWS API Documentation
Request Syntax
response = client.list_builds(
sortOrder='ASCENDING'|'DESCENDING',
nextToken='string'
)
The order to list build IDs. Valid values include:
dict
Response Syntax
{
'ids': [
'string',
],
'nextToken': 'string'
}
Response Structure
(dict) --
ids (list) --
A list of build IDs, with each build ID representing a single build.
nextToken (string) --
If there are more than 100 items in the list, only the first 100 items are returned, along with a unique string called a nextToken . To get the next batch of items in the list, call this operation again, adding the next token to the call.
Exceptions
Gets a list of build IDs for the specified build project, with each build ID representing a single build.
See also: AWS API Documentation
Request Syntax
response = client.list_builds_for_project(
projectName='string',
sortOrder='ASCENDING'|'DESCENDING',
nextToken='string'
)
[REQUIRED]
The name of the AWS CodeBuild project.
The order to list build IDs. Valid values include:
dict
Response Syntax
{
'ids': [
'string',
],
'nextToken': 'string'
}
Response Structure
(dict) --
ids (list) --
A list of build IDs for the specified build project, with each build ID representing a single build.
nextToken (string) --
If there are more than 100 items in the list, only the first 100 items are returned, along with a unique string called a nextToken . To get the next batch of items in the list, call this operation again, adding the next token to the call.
Exceptions
Gets information about Docker images that are managed by AWS CodeBuild.
See also: AWS API Documentation
Request Syntax
response = client.list_curated_environment_images()
{
'platforms': [
{
'platform': 'DEBIAN'|'AMAZON_LINUX'|'UBUNTU'|'WINDOWS_SERVER',
'languages': [
{
'language': 'JAVA'|'PYTHON'|'NODE_JS'|'RUBY'|'GOLANG'|'DOCKER'|'ANDROID'|'DOTNET'|'BASE'|'PHP',
'images': [
{
'name': 'string',
'description': 'string',
'versions': [
'string',
]
},
]
},
]
},
]
}
Response Structure
Information about supported platforms for Docker images that are managed by AWS CodeBuild.
A set of Docker images that are related by platform and are managed by AWS CodeBuild.
The platform's name.
The list of programming languages that are available for the specified platform.
A set of Docker images that are related by programming language and are managed by AWS CodeBuild.
The programming language for the Docker images.
The list of Docker images that are related by the specified programming language.
Information about a Docker image that is managed by AWS CodeBuild.
The name of the Docker image.
The description of the Docker image.
A list of environment image versions.
Gets a list of build project names, with each build project name representing a single build project.
See also: AWS API Documentation
Request Syntax
response = client.list_projects(
sortBy='NAME'|'CREATED_TIME'|'LAST_MODIFIED_TIME',
sortOrder='ASCENDING'|'DESCENDING',
nextToken='string'
)
The criterion to be used to list build project names. Valid values include:
Use sortOrder to specify in what order to list the build project names based on the preceding criteria.
The order in which to list build projects. Valid values include:
Use sortBy to specify the criterion to be used to list build project names.
dict
Response Syntax
{
'nextToken': 'string',
'projects': [
'string',
]
}
Response Structure
(dict) --
nextToken (string) --
If there are more than 100 items in the list, only the first 100 items are returned, along with a unique string called a nextToken . To get the next batch of items in the list, call this operation again, adding the next token to the call.
projects (list) --
The list of build project names, with each build project name representing a single build project.
Exceptions
Gets a list ARNs for the report groups in the current AWS account.
See also: AWS API Documentation
Request Syntax
response = client.list_report_groups(
sortOrder='ASCENDING'|'DESCENDING',
sortBy='NAME'|'CREATED_TIME'|'LAST_MODIFIED_TIME',
nextToken='string',
maxResults=123
)
The criterion to be used to list build report groups. Valid values include:
dict
Response Syntax
{
'nextToken': 'string',
'reportGroups': [
'string',
]
}
Response Structure
(dict) --
nextToken (string) --
During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
reportGroups (list) --
The list of ARNs for the report groups in the current AWS account.
Exceptions
Returns a list of ARNs for the reports in the current AWS account.
See also: AWS API Documentation
Request Syntax
response = client.list_reports(
sortOrder='ASCENDING'|'DESCENDING',
nextToken='string',
maxResults=123,
filter={
'status': 'GENERATING'|'SUCCEEDED'|'FAILED'|'INCOMPLETE'|'DELETING'
}
)
Specifies the sort order for the list of returned reports. Valid values are:
A ReportFilter object used to filter the returned reports.
The status used to filter reports. You can filter using one status only.
dict
Response Syntax
{
'nextToken': 'string',
'reports': [
'string',
]
}
Response Structure
(dict) --
nextToken (string) --
During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
reports (list) --
The list of returned ARNs for the reports in the current AWS account.
Exceptions
Returns a list of ARNs for the reports that belong to a ReportGroup .
See also: AWS API Documentation
Request Syntax
response = client.list_reports_for_report_group(
reportGroupArn='string',
nextToken='string',
sortOrder='ASCENDING'|'DESCENDING',
maxResults=123,
filter={
'status': 'GENERATING'|'SUCCEEDED'|'FAILED'|'INCOMPLETE'|'DELETING'
}
)
[REQUIRED]
The ARN of the report group for which you want to return report ARNs.
A ReportFilter object used to filter the returned reports.
The status used to filter reports. You can filter using one status only.
dict
Response Syntax
{
'nextToken': 'string',
'reports': [
'string',
]
}
Response Structure
(dict) --
nextToken (string) --
During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
reports (list) --
The list of returned report group ARNs.
Exceptions
Gets a list of projects that are shared with other AWS accounts or users.
See also: AWS API Documentation
Request Syntax
response = client.list_shared_projects(
sortBy='ARN'|'MODIFIED_TIME',
sortOrder='ASCENDING'|'DESCENDING',
maxResults=123,
nextToken='string'
)
The criterion to be used to list build projects shared with the current AWS account or user. Valid values include:
The order in which to list shared build projects. Valid values include:
dict
Response Syntax
{
'nextToken': 'string',
'projects': [
'string',
]
}
Response Structure
(dict) --
nextToken (string) --
During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
projects (list) --
The list of ARNs for the build projects shared with the current AWS account or user.
Exceptions
Gets a list of report groups that are shared with other AWS accounts or users.
See also: AWS API Documentation
Request Syntax
response = client.list_shared_report_groups(
sortOrder='ASCENDING'|'DESCENDING',
sortBy='ARN'|'MODIFIED_TIME',
nextToken='string',
maxResults=123
)
The order in which to list shared report groups. Valid values include:
The criterion to be used to list report groups shared with the current AWS account or user. Valid values include:
dict
Response Syntax
{
'nextToken': 'string',
'reportGroups': [
'string',
]
}
Response Structure
(dict) --
nextToken (string) --
During a previous call, the maximum number of items that can be returned is the value specified in maxResults . If there more items in the list, then a unique string called a nextToken is returned. To get the next batch of items in the list, call this operation again, adding the next token to the call. To get all of the items in the list, keep calling this operation with each subsequent next token that is returned, until no more next tokens are returned.
reportGroups (list) --
The list of ARNs for the report groups shared with the current AWS account or user.
Exceptions
Returns a list of SourceCredentialsInfo objects.
See also: AWS API Documentation
Request Syntax
response = client.list_source_credentials()
{
'sourceCredentialsInfos': [
{
'arn': 'string',
'serverType': 'GITHUB'|'BITBUCKET'|'GITHUB_ENTERPRISE',
'authType': 'OAUTH'|'BASIC_AUTH'|'PERSONAL_ACCESS_TOKEN'
},
]
}
Response Structure
A list of SourceCredentialsInfo objects. Each SourceCredentialsInfo object includes the authentication type, token ARN, and type of source provider for one set of credentials.
Information about the credentials for a GitHub, GitHub Enterprise, or Bitbucket repository.
The Amazon Resource Name (ARN) of the token.
The type of source provider. The valid options are GITHUB, GITHUB_ENTERPRISE, or BITBUCKET.
The type of authentication used by the credentials. Valid options are OAUTH, BASIC_AUTH, or PERSONAL_ACCESS_TOKEN.
Stores a resource policy for the ARN of a Project or ReportGroup object.
See also: AWS API Documentation
Request Syntax
response = client.put_resource_policy(
policy='string',
resourceArn='string'
)
[REQUIRED]
A JSON-formatted resource policy. For more information, see Sharing a Project and Sharing a Report Group in the AWS CodeBuild User Guide .
[REQUIRED]
The ARN of the Project or ReportGroup resource you want to associate with a resource policy.
dict
Response Syntax
{
'resourceArn': 'string'
}
Response Structure
(dict) --
resourceArn (string) --
The ARN of the Project or ReportGroup resource that is associated with a resource policy.
Exceptions
Starts running a build.
See also: AWS API Documentation
Request Syntax
response = client.start_build(
projectName='string',
secondarySourcesOverride=[
{
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
],
secondarySourcesVersionOverride=[
{
'sourceIdentifier': 'string',
'sourceVersion': 'string'
},
],
sourceVersion='string',
artifactsOverride={
'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
'location': 'string',
'path': 'string',
'namespaceType': 'NONE'|'BUILD_ID',
'name': 'string',
'packaging': 'NONE'|'ZIP',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
secondaryArtifactsOverride=[
{
'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
'location': 'string',
'path': 'string',
'namespaceType': 'NONE'|'BUILD_ID',
'name': 'string',
'packaging': 'NONE'|'ZIP',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
],
environmentVariablesOverride=[
{
'name': 'string',
'value': 'string',
'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
},
],
sourceTypeOverride='CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
sourceLocationOverride='string',
sourceAuthOverride={
'type': 'OAUTH',
'resource': 'string'
},
gitCloneDepthOverride=123,
gitSubmodulesConfigOverride={
'fetchSubmodules': True|False
},
buildspecOverride='string',
insecureSslOverride=True|False,
reportBuildStatusOverride=True|False,
environmentTypeOverride='WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER',
imageOverride='string',
computeTypeOverride='BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
certificateOverride='string',
cacheOverride={
'type': 'NO_CACHE'|'S3'|'LOCAL',
'location': 'string',
'modes': [
'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
]
},
serviceRoleOverride='string',
privilegedModeOverride=True|False,
timeoutInMinutesOverride=123,
queuedTimeoutInMinutesOverride=123,
encryptionKeyOverride='string',
idempotencyToken='string',
logsConfigOverride={
'cloudWatchLogs': {
'status': 'ENABLED'|'DISABLED',
'groupName': 'string',
'streamName': 'string'
},
's3Logs': {
'status': 'ENABLED'|'DISABLED',
'location': 'string',
'encryptionDisabled': True|False
}
},
registryCredentialOverride={
'credential': 'string',
'credentialProvider': 'SECRETS_MANAGER'
},
imagePullCredentialsTypeOverride='CODEBUILD'|'SERVICE_ROLE'
)
[REQUIRED]
The name of the AWS CodeBuild build project to start running a build.
An array of ProjectSource objects.
Information about the build input source code for the build project.
The type of repository that contains the source code to be built. Valid values include:
Information about the location of the source code to be built. Valid values include:
Information about the Git clone depth for the build project.
Information about the Git submodules configuration for the build project.
Set to true to fetch Git submodules for your AWS CodeBuild build project.
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
The resource value that applies to the specified authorization type.
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
Enable this flag to ignore SSL warnings while connecting to the project source code.
An identifier for this project source.
An array of ProjectSourceVersion objects that specify one or more versions of the project's secondary sources to be used for this build only.
A source identifier and its corresponding version.
An identifier for a source in the build project.
The source version for the corresponding source identifier. If specified, must be one of:
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
A version of the build input to be built, for this build only. If not specified, the latest version is used. If specified, must be one of:
If sourceVersion is specified at the project level, then this sourceVersion (at the build level) takes precedence.
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
Build output artifact settings that override, for this build only, the latest ones already defined in the build project.
The type of build output artifact. Valid values include:
Note
The CODEPIPELINE type is not supported for secondaryArtifacts .
Information about the build output artifact location:
Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .
Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example:
The type of build output artifact to create:
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.
An identifier for this artifact definition.
An array of ProjectArtifacts objects.
Information about the build output artifacts for the build project.
The type of build output artifact. Valid values include:
Note
The CODEPIPELINE type is not supported for secondaryArtifacts .
Information about the build output artifact location:
Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .
Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example:
The type of build output artifact to create:
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.
An identifier for this artifact definition.
A set of environment variables that overrides, for this build only, the latest ones already defined in the build project.
Information about an environment variable for a build project or a build.
The name or key of the environment variable.
The value of the environment variable.
Warning
We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .
The type of environment variable. Valid values include:
An authorization type for this build that overrides the one defined in the build project. This override applies only if the build project's source is BitBucket or GitHub.
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
The resource value that applies to the specified authorization type.
Information about the Git submodules configuration for this build of an AWS CodeBuild build project.
Set to true to fetch Git submodules for your AWS CodeBuild build project.
A buildspec file declaration that overrides, for this build only, the latest one already defined in the build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
Set to true to report to your source provider the status of a build's start and completion. If you use this option with a source provider other than GitHub, GitHub Enterprise, or Bitbucket, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
A ProjectCache object specified for this build that overrides the one defined in the build project.
The type of cache used by the build project. Valid values include:
Information about the cache location:
If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.
Note
The AWS Key Management Service (AWS KMS) customer master key (CMK) that overrides the one specified in the build project. The CMK key encrypts the build output artifacts.
Note
You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).
Log settings for this build that override the log settings defined in the build project.
Information about Amazon CloudWatch Logs for a build project. Amazon CloudWatch Logs are enabled by default.
The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:
The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
Information about logs built to an S3 bucket for a build project. S3 logs are not enabled by default.
The current status of the S3 build logs. Valid values are:
The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .
Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.
The credentials for access to a private registry.
The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current AWS Region.
The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.
The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:
When using a cross-account or private registry image, you must use SERVICE_ROLE credentials. When using an AWS CodeBuild curated image, you must use CODEBUILD credentials.
dict
Response Syntax
{
'build': {
'id': 'string',
'arn': 'string',
'buildNumber': 123,
'startTime': datetime(2015, 1, 1),
'endTime': datetime(2015, 1, 1),
'currentPhase': 'string',
'buildStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
'sourceVersion': 'string',
'resolvedSourceVersion': 'string',
'projectName': 'string',
'phases': [
{
'phaseType': 'SUBMITTED'|'QUEUED'|'PROVISIONING'|'DOWNLOAD_SOURCE'|'INSTALL'|'PRE_BUILD'|'BUILD'|'POST_BUILD'|'UPLOAD_ARTIFACTS'|'FINALIZING'|'COMPLETED',
'phaseStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
'startTime': datetime(2015, 1, 1),
'endTime': datetime(2015, 1, 1),
'durationInSeconds': 123,
'contexts': [
{
'statusCode': 'string',
'message': 'string'
},
]
},
],
'source': {
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
'secondarySources': [
{
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
],
'secondarySourceVersions': [
{
'sourceIdentifier': 'string',
'sourceVersion': 'string'
},
],
'artifacts': {
'location': 'string',
'sha256sum': 'string',
'md5sum': 'string',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
'secondaryArtifacts': [
{
'location': 'string',
'sha256sum': 'string',
'md5sum': 'string',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
],
'cache': {
'type': 'NO_CACHE'|'S3'|'LOCAL',
'location': 'string',
'modes': [
'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
]
},
'environment': {
'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER',
'image': 'string',
'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
'environmentVariables': [
{
'name': 'string',
'value': 'string',
'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
},
],
'privilegedMode': True|False,
'certificate': 'string',
'registryCredential': {
'credential': 'string',
'credentialProvider': 'SECRETS_MANAGER'
},
'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
},
'serviceRole': 'string',
'logs': {
'groupName': 'string',
'streamName': 'string',
'deepLink': 'string',
's3DeepLink': 'string',
'cloudWatchLogsArn': 'string',
's3LogsArn': 'string',
'cloudWatchLogs': {
'status': 'ENABLED'|'DISABLED',
'groupName': 'string',
'streamName': 'string'
},
's3Logs': {
'status': 'ENABLED'|'DISABLED',
'location': 'string',
'encryptionDisabled': True|False
}
},
'timeoutInMinutes': 123,
'queuedTimeoutInMinutes': 123,
'buildComplete': True|False,
'initiator': 'string',
'vpcConfig': {
'vpcId': 'string',
'subnets': [
'string',
],
'securityGroupIds': [
'string',
]
},
'networkInterface': {
'subnetId': 'string',
'networkInterfaceId': 'string'
},
'encryptionKey': 'string',
'exportedEnvironmentVariables': [
{
'name': 'string',
'value': 'string'
},
],
'reportArns': [
'string',
],
'fileSystemLocations': [
{
'type': 'EFS',
'location': 'string',
'mountPoint': 'string',
'identifier': 'string',
'mountOptions': 'string'
},
]
}
}
Response Structure
(dict) --
build (dict) --
Information about the build to be run.
id (string) --
The unique ID for the build.
arn (string) --
The Amazon Resource Name (ARN) of the build.
buildNumber (integer) --
The number of the build. For each project, the buildNumber of its first build is 1 . The buildNumber of each subsequent build is incremented by 1 . If a build is deleted, the buildNumber of other builds does not change.
startTime (datetime) --
When the build process started, expressed in Unix time format.
endTime (datetime) --
When the build process ended, expressed in Unix time format.
currentPhase (string) --
The current build phase.
buildStatus (string) --
The current status of the build. Valid values include:
sourceVersion (string) --
Any version identifier for the version of the source code to be built. If sourceVersion is specified at the project level, then this sourceVersion (at the build level) takes precedence.
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
resolvedSourceVersion (string) --
An identifier for the version of this build's source code.
projectName (string) --
The name of the AWS CodeBuild project.
phases (list) --
Information about all previous build phases that are complete and information about any current build phase that is not yet complete.
(dict) --
Information about a stage for a build.
phaseType (string) --
The name of the build phase. Valid values include:
phaseStatus (string) --
The current status of the build phase. Valid values include:
startTime (datetime) --
When the build phase started, expressed in Unix time format.
endTime (datetime) --
When the build phase ended, expressed in Unix time format.
durationInSeconds (integer) --
How long, in seconds, between the starting and ending times of the build's phase.
contexts (list) --
Additional information about a build phase, especially to help troubleshoot a failed build.
(dict) --
Additional information about a build phase that has an error. You can use this information for troubleshooting.
statusCode (string) --
The status code for the context of the build phase.
message (string) --
An explanation of the build phase's context. This might include a command ID and an exit code.
source (dict) --
Information about the source code to be built.
type (string) --
The type of repository that contains the source code to be built. Valid values include:
location (string) --
Information about the location of the source code to be built. Valid values include:
gitCloneDepth (integer) --
Information about the Git clone depth for the build project.
gitSubmodulesConfig (dict) --
Information about the Git submodules configuration for the build project.
fetchSubmodules (boolean) --
Set to true to fetch Git submodules for your AWS CodeBuild build project.
buildspec (string) --
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
auth (dict) --
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
type (string) --
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
resource (string) --
The resource value that applies to the specified authorization type.
reportBuildStatus (boolean) --
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
insecureSsl (boolean) --
Enable this flag to ignore SSL warnings while connecting to the project source code.
sourceIdentifier (string) --
An identifier for this project source.
secondarySources (list) --
An array of ProjectSource objects.
(dict) --
Information about the build input source code for the build project.
type (string) --
The type of repository that contains the source code to be built. Valid values include:
location (string) --
Information about the location of the source code to be built. Valid values include:
gitCloneDepth (integer) --
Information about the Git clone depth for the build project.
gitSubmodulesConfig (dict) --
Information about the Git submodules configuration for the build project.
fetchSubmodules (boolean) --
Set to true to fetch Git submodules for your AWS CodeBuild build project.
buildspec (string) --
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
auth (dict) --
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
type (string) --
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
resource (string) --
The resource value that applies to the specified authorization type.
reportBuildStatus (boolean) --
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
insecureSsl (boolean) --
Enable this flag to ignore SSL warnings while connecting to the project source code.
sourceIdentifier (string) --
An identifier for this project source.
secondarySourceVersions (list) --
An array of ProjectSourceVersion objects. Each ProjectSourceVersion must be one of:
(dict) --
A source identifier and its corresponding version.
sourceIdentifier (string) --
An identifier for a source in the build project.
sourceVersion (string) --
The source version for the corresponding source identifier. If specified, must be one of:
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
artifacts (dict) --
Information about the output artifacts for the build.
location (string) --
Information about the location of the build artifacts.
sha256sum (string) --
The SHA-256 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
md5sum (string) --
The MD5 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
overrideArtifactName (boolean) --
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
encryptionDisabled (boolean) --
Information that tells you if encryption for build artifacts is disabled.
artifactIdentifier (string) --
An identifier for this artifact definition.
secondaryArtifacts (list) --
An array of ProjectArtifacts objects.
(dict) --
Information about build output artifacts.
location (string) --
Information about the location of the build artifacts.
sha256sum (string) --
The SHA-256 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
md5sum (string) --
The MD5 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
overrideArtifactName (boolean) --
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
encryptionDisabled (boolean) --
Information that tells you if encryption for build artifacts is disabled.
artifactIdentifier (string) --
An identifier for this artifact definition.
cache (dict) --
Information about the cache for the build.
type (string) --
The type of cache used by the build project. Valid values include:
location (string) --
Information about the cache location:
modes (list) --
If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.
Note
environment (dict) --
Information about the build environment for this build.
type (string) --
The type of build environment to use for related builds.
image (string) --
The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:
computeType (string) --
Information about the compute resources the build project uses. Available values include:
If you use BUILD_GENERAL1_LARGE :
For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.
environmentVariables (list) --
A set of environment variables to make available to builds for this build project.
(dict) --
Information about an environment variable for a build project or a build.
name (string) --
The name or key of the environment variable.
value (string) --
The value of the environment variable.
Warning
We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .
type (string) --
The type of environment variable. Valid values include:
privilegedMode (boolean) --
Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .
You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:
If the operating system's base image is Ubuntu Linux:
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&
- timeout 15 sh -c "until docker info; do echo .; sleep 1; done"
If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&
- timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
certificate (string) --
The certificate to use with this build project.
registryCredential (dict) --
The credentials for access to a private registry.
credential (string) --
The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current AWS Region.
credentialProvider (string) --
The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.
imagePullCredentialsType (string) --
The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:
When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.
serviceRole (string) --
The name of a service role used for this build.
logs (dict) --
Information about the build's logs in Amazon CloudWatch Logs.
groupName (string) --
The name of the Amazon CloudWatch Logs group for the build logs.
streamName (string) --
The name of the Amazon CloudWatch Logs stream for the build logs.
deepLink (string) --
The URL to an individual build log in Amazon CloudWatch Logs.
s3DeepLink (string) --
The URL to a build log in an S3 bucket.
cloudWatchLogsArn (string) --
The ARN of Amazon CloudWatch Logs for a build project. Its format is arn:${Partition}:logs:${Region}:${Account}:log-group:${LogGroupName}:log-stream:${LogStreamName} . For more information, see Resources Defined by Amazon CloudWatch Logs .
s3LogsArn (string) --
The ARN of S3 logs for a build project. Its format is arn:${Partition}:s3:::${BucketName}/${ObjectName} . For more information, see Resources Defined by Amazon S3 .
cloudWatchLogs (dict) --
Information about Amazon CloudWatch Logs for a build project.
status (string) --
The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:
groupName (string) --
The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
streamName (string) --
The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
s3Logs (dict) --
Information about S3 logs for a build project.
status (string) --
The current status of the S3 build logs. Valid values are:
location (string) --
The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .
encryptionDisabled (boolean) --
Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.
timeoutInMinutes (integer) --
How long, in minutes, for AWS CodeBuild to wait before timing out this build if it does not get marked as completed.
queuedTimeoutInMinutes (integer) --
The number of minutes a build is allowed to be queued before it times out.
buildComplete (boolean) --
Whether the build is complete. True if complete; otherwise, false.
initiator (string) --
The entity that started the build. Valid values include:
vpcConfig (dict) --
If your AWS CodeBuild project accesses resources in an Amazon VPC, you provide this parameter that identifies the VPC ID and the list of security group IDs and subnet IDs. The security groups and subnets must belong to the same VPC. You must provide at least one security group and one subnet ID.
vpcId (string) --
The ID of the Amazon VPC.
subnets (list) --
A list of one or more subnet IDs in your Amazon VPC.
securityGroupIds (list) --
A list of one or more security groups IDs in your Amazon VPC.
networkInterface (dict) --
Describes a network interface.
subnetId (string) --
The ID of the subnet.
networkInterfaceId (string) --
The ID of the network interface.
encryptionKey (string) --
The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.
Note
You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).
exportedEnvironmentVariables (list) --
A list of exported environment variables for this build.
(dict) --
Information about an exported environment variable.
name (string) --
The name of this exported environment variable.
value (string) --
The value assigned to this exported environment variable.
Note
During a build, the value of a variable is available starting with the install phase. It can be updated between the start of the install phase and the end of the post_build phase. After the post_build phase ends, the value of exported variables cannot change.
reportArns (list) --
An array of the ARNs associated with this build's reports.
fileSystemLocations (list) --
An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.
(dict) --
Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?
type (string) --
The type of the file system. The one supported type is EFS .
location (string) --
A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .
The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.
mountPoint (string) --
The location in the container where you mount the file system.
identifier (string) --
The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .
The identifier is used to mount your file system.
mountOptions (string) --
The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .
Exceptions
Attempts to stop running a build.
See also: AWS API Documentation
Request Syntax
response = client.stop_build(
id='string'
)
[REQUIRED]
The ID of the build.
{
'build': {
'id': 'string',
'arn': 'string',
'buildNumber': 123,
'startTime': datetime(2015, 1, 1),
'endTime': datetime(2015, 1, 1),
'currentPhase': 'string',
'buildStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
'sourceVersion': 'string',
'resolvedSourceVersion': 'string',
'projectName': 'string',
'phases': [
{
'phaseType': 'SUBMITTED'|'QUEUED'|'PROVISIONING'|'DOWNLOAD_SOURCE'|'INSTALL'|'PRE_BUILD'|'BUILD'|'POST_BUILD'|'UPLOAD_ARTIFACTS'|'FINALIZING'|'COMPLETED',
'phaseStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
'startTime': datetime(2015, 1, 1),
'endTime': datetime(2015, 1, 1),
'durationInSeconds': 123,
'contexts': [
{
'statusCode': 'string',
'message': 'string'
},
]
},
],
'source': {
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
'secondarySources': [
{
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
],
'secondarySourceVersions': [
{
'sourceIdentifier': 'string',
'sourceVersion': 'string'
},
],
'artifacts': {
'location': 'string',
'sha256sum': 'string',
'md5sum': 'string',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
'secondaryArtifacts': [
{
'location': 'string',
'sha256sum': 'string',
'md5sum': 'string',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
],
'cache': {
'type': 'NO_CACHE'|'S3'|'LOCAL',
'location': 'string',
'modes': [
'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
]
},
'environment': {
'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER',
'image': 'string',
'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
'environmentVariables': [
{
'name': 'string',
'value': 'string',
'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
},
],
'privilegedMode': True|False,
'certificate': 'string',
'registryCredential': {
'credential': 'string',
'credentialProvider': 'SECRETS_MANAGER'
},
'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
},
'serviceRole': 'string',
'logs': {
'groupName': 'string',
'streamName': 'string',
'deepLink': 'string',
's3DeepLink': 'string',
'cloudWatchLogsArn': 'string',
's3LogsArn': 'string',
'cloudWatchLogs': {
'status': 'ENABLED'|'DISABLED',
'groupName': 'string',
'streamName': 'string'
},
's3Logs': {
'status': 'ENABLED'|'DISABLED',
'location': 'string',
'encryptionDisabled': True|False
}
},
'timeoutInMinutes': 123,
'queuedTimeoutInMinutes': 123,
'buildComplete': True|False,
'initiator': 'string',
'vpcConfig': {
'vpcId': 'string',
'subnets': [
'string',
],
'securityGroupIds': [
'string',
]
},
'networkInterface': {
'subnetId': 'string',
'networkInterfaceId': 'string'
},
'encryptionKey': 'string',
'exportedEnvironmentVariables': [
{
'name': 'string',
'value': 'string'
},
],
'reportArns': [
'string',
],
'fileSystemLocations': [
{
'type': 'EFS',
'location': 'string',
'mountPoint': 'string',
'identifier': 'string',
'mountOptions': 'string'
},
]
}
}
Response Structure
Information about the build.
The unique ID for the build.
The Amazon Resource Name (ARN) of the build.
The number of the build. For each project, the buildNumber of its first build is 1 . The buildNumber of each subsequent build is incremented by 1 . If a build is deleted, the buildNumber of other builds does not change.
When the build process started, expressed in Unix time format.
When the build process ended, expressed in Unix time format.
The current build phase.
The current status of the build. Valid values include:
Any version identifier for the version of the source code to be built. If sourceVersion is specified at the project level, then this sourceVersion (at the build level) takes precedence.
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
An identifier for the version of this build's source code.
The name of the AWS CodeBuild project.
Information about all previous build phases that are complete and information about any current build phase that is not yet complete.
Information about a stage for a build.
The name of the build phase. Valid values include:
The current status of the build phase. Valid values include:
When the build phase started, expressed in Unix time format.
When the build phase ended, expressed in Unix time format.
How long, in seconds, between the starting and ending times of the build's phase.
Additional information about a build phase, especially to help troubleshoot a failed build.
Additional information about a build phase that has an error. You can use this information for troubleshooting.
The status code for the context of the build phase.
An explanation of the build phase's context. This might include a command ID and an exit code.
Information about the source code to be built.
The type of repository that contains the source code to be built. Valid values include:
Information about the location of the source code to be built. Valid values include:
Information about the Git clone depth for the build project.
Information about the Git submodules configuration for the build project.
Set to true to fetch Git submodules for your AWS CodeBuild build project.
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
The resource value that applies to the specified authorization type.
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
Enable this flag to ignore SSL warnings while connecting to the project source code.
An identifier for this project source.
An array of ProjectSource objects.
Information about the build input source code for the build project.
The type of repository that contains the source code to be built. Valid values include:
Information about the location of the source code to be built. Valid values include:
Information about the Git clone depth for the build project.
Information about the Git submodules configuration for the build project.
Set to true to fetch Git submodules for your AWS CodeBuild build project.
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
The resource value that applies to the specified authorization type.
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
Enable this flag to ignore SSL warnings while connecting to the project source code.
An identifier for this project source.
An array of ProjectSourceVersion objects. Each ProjectSourceVersion must be one of:
A source identifier and its corresponding version.
An identifier for a source in the build project.
The source version for the corresponding source identifier. If specified, must be one of:
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
Information about the output artifacts for the build.
Information about the location of the build artifacts.
The SHA-256 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
The MD5 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
Information that tells you if encryption for build artifacts is disabled.
An identifier for this artifact definition.
An array of ProjectArtifacts objects.
Information about build output artifacts.
Information about the location of the build artifacts.
The SHA-256 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
The MD5 hash of the build artifact.
You can use this hash along with a checksum tool to confirm file integrity and authenticity.
Note
This value is available only if the build project's packaging value is set to ZIP .
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
Information that tells you if encryption for build artifacts is disabled.
An identifier for this artifact definition.
Information about the cache for the build.
The type of cache used by the build project. Valid values include:
Information about the cache location:
If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.
Note
Information about the build environment for this build.
The type of build environment to use for related builds.
The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:
Information about the compute resources the build project uses. Available values include:
If you use BUILD_GENERAL1_LARGE :
For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.
A set of environment variables to make available to builds for this build project.
Information about an environment variable for a build project or a build.
The name or key of the environment variable.
The value of the environment variable.
Warning
We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .
The type of environment variable. Valid values include:
Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .
You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:
If the operating system's base image is Ubuntu Linux:
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&- timeout 15 sh -c "until docker info; do echo .; sleep 1; done"
If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&- timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
The certificate to use with this build project.
The credentials for access to a private registry.
The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current AWS Region.
The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.
The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:
When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.
The name of a service role used for this build.
Information about the build's logs in Amazon CloudWatch Logs.
The name of the Amazon CloudWatch Logs group for the build logs.
The name of the Amazon CloudWatch Logs stream for the build logs.
The URL to an individual build log in Amazon CloudWatch Logs.
The URL to a build log in an S3 bucket.
The ARN of Amazon CloudWatch Logs for a build project. Its format is arn:${Partition}:logs:${Region}:${Account}:log-group:${LogGroupName}:log-stream:${LogStreamName} . For more information, see Resources Defined by Amazon CloudWatch Logs .
The ARN of S3 logs for a build project. Its format is arn:${Partition}:s3:::${BucketName}/${ObjectName} . For more information, see Resources Defined by Amazon S3 .
Information about Amazon CloudWatch Logs for a build project.
The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:
The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
Information about S3 logs for a build project.
The current status of the S3 build logs. Valid values are:
The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .
Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.
How long, in minutes, for AWS CodeBuild to wait before timing out this build if it does not get marked as completed.
The number of minutes a build is allowed to be queued before it times out.
Whether the build is complete. True if complete; otherwise, false.
The entity that started the build. Valid values include:
If your AWS CodeBuild project accesses resources in an Amazon VPC, you provide this parameter that identifies the VPC ID and the list of security group IDs and subnet IDs. The security groups and subnets must belong to the same VPC. You must provide at least one security group and one subnet ID.
The ID of the Amazon VPC.
A list of one or more subnet IDs in your Amazon VPC.
A list of one or more security groups IDs in your Amazon VPC.
Describes a network interface.
The ID of the subnet.
The ID of the network interface.
The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.
Note
You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).
A list of exported environment variables for this build.
Information about an exported environment variable.
The name of this exported environment variable.
The value assigned to this exported environment variable.
Note
During a build, the value of a variable is available starting with the install phase. It can be updated between the start of the install phase and the end of the post_build phase. After the post_build phase ends, the value of exported variables cannot change.
An array of the ARNs associated with this build's reports.
An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.
Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?
The type of the file system. The one supported type is EFS .
A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .
The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.
The location in the container where you mount the file system.
The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .
The identifier is used to mount your file system.
The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .
Exceptions
Changes the settings of a build project.
See also: AWS API Documentation
Request Syntax
response = client.update_project(
name='string',
description='string',
source={
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
secondarySources=[
{
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
],
sourceVersion='string',
secondarySourceVersions=[
{
'sourceIdentifier': 'string',
'sourceVersion': 'string'
},
],
artifacts={
'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
'location': 'string',
'path': 'string',
'namespaceType': 'NONE'|'BUILD_ID',
'name': 'string',
'packaging': 'NONE'|'ZIP',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
secondaryArtifacts=[
{
'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
'location': 'string',
'path': 'string',
'namespaceType': 'NONE'|'BUILD_ID',
'name': 'string',
'packaging': 'NONE'|'ZIP',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
],
cache={
'type': 'NO_CACHE'|'S3'|'LOCAL',
'location': 'string',
'modes': [
'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
]
},
environment={
'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER',
'image': 'string',
'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
'environmentVariables': [
{
'name': 'string',
'value': 'string',
'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
},
],
'privilegedMode': True|False,
'certificate': 'string',
'registryCredential': {
'credential': 'string',
'credentialProvider': 'SECRETS_MANAGER'
},
'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
},
serviceRole='string',
timeoutInMinutes=123,
queuedTimeoutInMinutes=123,
encryptionKey='string',
tags=[
{
'key': 'string',
'value': 'string'
},
],
vpcConfig={
'vpcId': 'string',
'subnets': [
'string',
],
'securityGroupIds': [
'string',
]
},
badgeEnabled=True|False,
logsConfig={
'cloudWatchLogs': {
'status': 'ENABLED'|'DISABLED',
'groupName': 'string',
'streamName': 'string'
},
's3Logs': {
'status': 'ENABLED'|'DISABLED',
'location': 'string',
'encryptionDisabled': True|False
}
},
fileSystemLocations=[
{
'type': 'EFS',
'location': 'string',
'mountPoint': 'string',
'identifier': 'string',
'mountOptions': 'string'
},
]
)
[REQUIRED]
The name of the build project.
Note
You cannot change a build project's name.
Information to be changed about the build input source code for the build project.
The type of repository that contains the source code to be built. Valid values include:
Information about the location of the source code to be built. Valid values include:
Information about the Git clone depth for the build project.
Information about the Git submodules configuration for the build project.
Set to true to fetch Git submodules for your AWS CodeBuild build project.
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
The resource value that applies to the specified authorization type.
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
Enable this flag to ignore SSL warnings while connecting to the project source code.
An identifier for this project source.
An array of ProjectSource objects.
Information about the build input source code for the build project.
The type of repository that contains the source code to be built. Valid values include:
Information about the location of the source code to be built. Valid values include:
Information about the Git clone depth for the build project.
Information about the Git submodules configuration for the build project.
Set to true to fetch Git submodules for your AWS CodeBuild build project.
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
The resource value that applies to the specified authorization type.
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
Enable this flag to ignore SSL warnings while connecting to the project source code.
An identifier for this project source.
A version of the build input to be built for this project. If not specified, the latest version is used. If specified, it must be one of:
If sourceVersion is specified at the build level, then that version takes precedence over this sourceVersion (at the project level).
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
An array of ProjectSourceVersion objects. If secondarySourceVersions is specified at the build level, then they take over these secondarySourceVersions (at the project level).
A source identifier and its corresponding version.
An identifier for a source in the build project.
The source version for the corresponding source identifier. If specified, must be one of:
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
Information to be changed about the build output artifacts for the build project.
The type of build output artifact. Valid values include:
Note
The CODEPIPELINE type is not supported for secondaryArtifacts .
Information about the build output artifact location:
Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .
Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example:
The type of build output artifact to create:
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.
An identifier for this artifact definition.
An array of ProjectSource objects.
Information about the build output artifacts for the build project.
The type of build output artifact. Valid values include:
Note
The CODEPIPELINE type is not supported for secondaryArtifacts .
Information about the build output artifact location:
Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .
Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example:
The type of build output artifact to create:
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.
An identifier for this artifact definition.
Stores recently used information so that it can be quickly accessed at a later time.
The type of cache used by the build project. Valid values include:
Information about the cache location:
If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.
Note
Information to be changed about the build environment for the build project.
The type of build environment to use for related builds.
The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:
Information about the compute resources the build project uses. Available values include:
If you use BUILD_GENERAL1_LARGE :
For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.
A set of environment variables to make available to builds for this build project.
Information about an environment variable for a build project or a build.
The name or key of the environment variable.
The value of the environment variable.
Warning
We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .
The type of environment variable. Valid values include:
Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .
You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:
If the operating system's base image is Ubuntu Linux:
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&- timeout 15 sh -c "until docker info; do echo .; sleep 1; done"
If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&- timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
The certificate to use with this build project.
The credentials for access to a private registry.
The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current AWS Region.
The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.
The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:
When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.
The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.
Note
You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).
An updated list of tag key and value pairs associated with this build project.
These tags are available for use by AWS services that support AWS CodeBuild build project tags.
A tag, consisting of a key and a value.
This tag is available for use by AWS services that support tags in AWS CodeBuild.
The tag's key.
The tag's value.
VpcConfig enables AWS CodeBuild to access resources in an Amazon VPC.
The ID of the Amazon VPC.
A list of one or more subnet IDs in your Amazon VPC.
A list of one or more security groups IDs in your Amazon VPC.
Information about logs for the build project. A project can create logs in Amazon CloudWatch Logs, logs in an S3 bucket, or both.
Information about Amazon CloudWatch Logs for a build project. Amazon CloudWatch Logs are enabled by default.
The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:
The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
Information about logs built to an S3 bucket for a build project. S3 logs are not enabled by default.
The current status of the S3 build logs. Valid values are:
The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .
Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.
An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.
Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?
The type of the file system. The one supported type is EFS .
A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .
The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.
The location in the container where you mount the file system.
The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .
The identifier is used to mount your file system.
The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .
dict
Response Syntax
{
'project': {
'name': 'string',
'arn': 'string',
'description': 'string',
'source': {
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
'secondarySources': [
{
'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET'|'GITHUB_ENTERPRISE'|'NO_SOURCE',
'location': 'string',
'gitCloneDepth': 123,
'gitSubmodulesConfig': {
'fetchSubmodules': True|False
},
'buildspec': 'string',
'auth': {
'type': 'OAUTH',
'resource': 'string'
},
'reportBuildStatus': True|False,
'insecureSsl': True|False,
'sourceIdentifier': 'string'
},
],
'sourceVersion': 'string',
'secondarySourceVersions': [
{
'sourceIdentifier': 'string',
'sourceVersion': 'string'
},
],
'artifacts': {
'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
'location': 'string',
'path': 'string',
'namespaceType': 'NONE'|'BUILD_ID',
'name': 'string',
'packaging': 'NONE'|'ZIP',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
'secondaryArtifacts': [
{
'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
'location': 'string',
'path': 'string',
'namespaceType': 'NONE'|'BUILD_ID',
'name': 'string',
'packaging': 'NONE'|'ZIP',
'overrideArtifactName': True|False,
'encryptionDisabled': True|False,
'artifactIdentifier': 'string'
},
],
'cache': {
'type': 'NO_CACHE'|'S3'|'LOCAL',
'location': 'string',
'modes': [
'LOCAL_DOCKER_LAYER_CACHE'|'LOCAL_SOURCE_CACHE'|'LOCAL_CUSTOM_CACHE',
]
},
'environment': {
'type': 'WINDOWS_CONTAINER'|'LINUX_CONTAINER'|'LINUX_GPU_CONTAINER'|'ARM_CONTAINER',
'image': 'string',
'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE'|'BUILD_GENERAL1_2XLARGE',
'environmentVariables': [
{
'name': 'string',
'value': 'string',
'type': 'PLAINTEXT'|'PARAMETER_STORE'|'SECRETS_MANAGER'
},
],
'privilegedMode': True|False,
'certificate': 'string',
'registryCredential': {
'credential': 'string',
'credentialProvider': 'SECRETS_MANAGER'
},
'imagePullCredentialsType': 'CODEBUILD'|'SERVICE_ROLE'
},
'serviceRole': 'string',
'timeoutInMinutes': 123,
'queuedTimeoutInMinutes': 123,
'encryptionKey': 'string',
'tags': [
{
'key': 'string',
'value': 'string'
},
],
'created': datetime(2015, 1, 1),
'lastModified': datetime(2015, 1, 1),
'webhook': {
'url': 'string',
'payloadUrl': 'string',
'secret': 'string',
'branchFilter': 'string',
'filterGroups': [
[
{
'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
'pattern': 'string',
'excludeMatchedPattern': True|False
},
],
],
'lastModifiedSecret': datetime(2015, 1, 1)
},
'vpcConfig': {
'vpcId': 'string',
'subnets': [
'string',
],
'securityGroupIds': [
'string',
]
},
'badge': {
'badgeEnabled': True|False,
'badgeRequestUrl': 'string'
},
'logsConfig': {
'cloudWatchLogs': {
'status': 'ENABLED'|'DISABLED',
'groupName': 'string',
'streamName': 'string'
},
's3Logs': {
'status': 'ENABLED'|'DISABLED',
'location': 'string',
'encryptionDisabled': True|False
}
},
'fileSystemLocations': [
{
'type': 'EFS',
'location': 'string',
'mountPoint': 'string',
'identifier': 'string',
'mountOptions': 'string'
},
]
}
}
Response Structure
(dict) --
project (dict) --
Information about the build project that was changed.
name (string) --
The name of the build project.
arn (string) --
The Amazon Resource Name (ARN) of the build project.
description (string) --
A description that makes the build project easy to identify.
source (dict) --
Information about the build input source code for this build project.
type (string) --
The type of repository that contains the source code to be built. Valid values include:
location (string) --
Information about the location of the source code to be built. Valid values include:
gitCloneDepth (integer) --
Information about the Git clone depth for the build project.
gitSubmodulesConfig (dict) --
Information about the Git submodules configuration for the build project.
fetchSubmodules (boolean) --
Set to true to fetch Git submodules for your AWS CodeBuild build project.
buildspec (string) --
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
auth (dict) --
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
type (string) --
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
resource (string) --
The resource value that applies to the specified authorization type.
reportBuildStatus (boolean) --
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
insecureSsl (boolean) --
Enable this flag to ignore SSL warnings while connecting to the project source code.
sourceIdentifier (string) --
An identifier for this project source.
secondarySources (list) --
An array of ProjectSource objects.
(dict) --
Information about the build input source code for the build project.
type (string) --
The type of repository that contains the source code to be built. Valid values include:
location (string) --
Information about the location of the source code to be built. Valid values include:
gitCloneDepth (integer) --
Information about the Git clone depth for the build project.
gitSubmodulesConfig (dict) --
Information about the Git submodules configuration for the build project.
fetchSubmodules (boolean) --
Set to true to fetch Git submodules for your AWS CodeBuild build project.
buildspec (string) --
The buildspec file declaration to use for the builds in this build project.
If this value is set, it can be either an inline buildspec definition, the path to an alternate buildspec file relative to the value of the built-in CODEBUILD_SRC_DIR environment variable, or the path to an S3 bucket. The bucket must be in the same AWS Region as the build project. Specify the buildspec file using its ARN (for example, arn:aws:s3:::my-codebuild-sample2/buildspec.yml ). If this value is not provided or is set to an empty string, the source code must contain a buildspec file in its root directory. For more information, see Buildspec File Name and Storage Location .
auth (dict) --
Information about the authorization settings for AWS CodeBuild to access the source code to be built.
This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly.
type (string) --
Note
This data type is deprecated and is no longer accurate or used.
The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
resource (string) --
The resource value that applies to the specified authorization type.
reportBuildStatus (boolean) --
Set to true to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, or Bitbucket. If this is set and you use a different source provider, an invalidInputException is thrown.
Note
The status of a build triggered by a webhook is always reported to your source provider.
insecureSsl (boolean) --
Enable this flag to ignore SSL warnings while connecting to the project source code.
sourceIdentifier (string) --
An identifier for this project source.
sourceVersion (string) --
A version of the build input to be built for this project. If not specified, the latest version is used. If specified, it must be one of:
If sourceVersion is specified at the build level, then that version takes precedence over this sourceVersion (at the project level).
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
secondarySourceVersions (list) --
An array of ProjectSourceVersion objects. If secondarySourceVersions is specified at the build level, then they take over these secondarySourceVersions (at the project level).
(dict) --
A source identifier and its corresponding version.
sourceIdentifier (string) --
An identifier for a source in the build project.
sourceVersion (string) --
The source version for the corresponding source identifier. If specified, must be one of:
For more information, see Source Version Sample with CodeBuild in the AWS CodeBuild User Guide .
artifacts (dict) --
Information about the build output artifacts for the build project.
type (string) --
The type of build output artifact. Valid values include:
Note
The CODEPIPELINE type is not supported for secondaryArtifacts .
location (string) --
Information about the build output artifact location:
path (string) --
Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .
namespaceType (string) --
Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
name (string) --
Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example:
packaging (string) --
The type of build output artifact to create:
overrideArtifactName (boolean) --
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
encryptionDisabled (boolean) --
Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.
artifactIdentifier (string) --
An identifier for this artifact definition.
secondaryArtifacts (list) --
An array of ProjectArtifacts objects.
(dict) --
Information about the build output artifacts for the build project.
type (string) --
The type of build output artifact. Valid values include:
Note
The CODEPIPELINE type is not supported for secondaryArtifacts .
location (string) --
Information about the build output artifact location:
path (string) --
Along with namespaceType and name , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , the output artifact is stored in the output bucket at MyArtifacts/MyArtifact.zip .
namespaceType (string) --
Along with path and name , the pattern that AWS CodeBuild uses to determine the name and location to store the output artifact:
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , the output artifact is stored in MyArtifacts/*build-ID* /MyArtifact.zip .
name (string) --
Along with path and namespaceType , the pattern that AWS CodeBuild uses to name and store the output artifact:
For example:
packaging (string) --
The type of build output artifact to create:
overrideArtifactName (boolean) --
If this flag is set, a name specified in the buildspec file overrides the artifact name. The name specified in a buildspec file is calculated at build time and uses the Shell Command Language. For example, you can append a date and time to your artifact name so that it is always unique.
encryptionDisabled (boolean) --
Set to true if you do not want your output artifacts encrypted. This option is valid only if your artifacts type is Amazon Simple Storage Service (Amazon S3). If this is set with another artifacts type, an invalidInputException is thrown.
artifactIdentifier (string) --
An identifier for this artifact definition.
cache (dict) --
Information about the cache for the build project.
type (string) --
The type of cache used by the build project. Valid values include:
location (string) --
Information about the cache location:
modes (list) --
If you use a LOCAL cache, the local cache mode. You can use one or more local cache modes at the same time.
Note
environment (dict) --
Information about the build environment for this build project.
type (string) --
The type of build environment to use for related builds.
image (string) --
The image tag or image digest that identifies the Docker image to use for this build project. Use the following formats:
computeType (string) --
Information about the compute resources the build project uses. Available values include:
If you use BUILD_GENERAL1_LARGE :
For more information, see Build Environment Compute Types in the AWS CodeBuild User Guide.
environmentVariables (list) --
A set of environment variables to make available to builds for this build project.
(dict) --
Information about an environment variable for a build project or a build.
name (string) --
The name or key of the environment variable.
value (string) --
The value of the environment variable.
Warning
We strongly discourage the use of PLAINTEXT environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. PLAINTEXT environment variables can be displayed in plain text using the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI). For sensitive values, we recommend you use an environment variable of type PARAMETER_STORE or SECRETS_MANAGER .
type (string) --
The type of environment variable. Valid values include:
privilegedMode (boolean) --
Enables running the Docker daemon inside a Docker container. Set to true only if the build project is used to build Docker images. Otherwise, a build that attempts to interact with the Docker daemon fails. The default setting is false .
You can initialize the Docker daemon during the install phase of your build by adding one of the following sets of commands to the install phase of your buildspec file:
If the operating system's base image is Ubuntu Linux:
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&
- timeout 15 sh -c "until docker info; do echo .; sleep 1; done"
If the operating system's base image is Alpine Linux and the previous command does not work, add the -t argument to timeout :
- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=overlay&
- timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
certificate (string) --
The certificate to use with this build project.
registryCredential (dict) --
The credentials for access to a private registry.
credential (string) --
The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
Note
The credential can use the name of the credentials only if they exist in your current AWS Region.
credentialProvider (string) --
The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.
imagePullCredentialsType (string) --
The type of credentials AWS CodeBuild uses to pull images in your build. There are two valid values:
When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials.
serviceRole (string) --
The ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
timeoutInMinutes (integer) --
How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait before timing out any related build that did not get marked as completed. The default is 60 minutes.
queuedTimeoutInMinutes (integer) --
The number of minutes a build is allowed to be queued before it times out.
encryptionKey (string) --
The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.
Note
You can use a cross-account KMS key to encrypt the build output artifacts if your service role has permission to that key.
You can specify either the Amazon Resource Name (ARN) of the CMK or, if available, the CMK's alias (using the format ``alias/alias-name `` ).
tags (list) --
A list of tag key and value pairs associated with this build project.
These tags are available for use by AWS services that support AWS CodeBuild build project tags.
(dict) --
A tag, consisting of a key and a value.
This tag is available for use by AWS services that support tags in AWS CodeBuild.
key (string) --
The tag's key.
value (string) --
The tag's value.
created (datetime) --
When the build project was created, expressed in Unix time format.
lastModified (datetime) --
When the build project's settings were last modified, expressed in Unix time format.
webhook (dict) --
Information about a webhook that connects repository events to a build project in AWS CodeBuild.
url (string) --
The URL to the webhook.
payloadUrl (string) --
The AWS CodeBuild endpoint where webhook events are sent.
secret (string) --
The secret token of the associated repository.
Note
A Bitbucket webhook does not support secret .
branchFilter (string) --
A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.
Note
It is recommended that you use filterGroups instead of branchFilter .
filterGroups (list) --
An array of arrays of WebhookFilter objects used to determine which webhooks are triggered. At least one WebhookFilter in the array must specify EVENT as its type .
For a build to be triggered, at least one filter group in the filterGroups array must pass. For a filter group to pass, each of its filters must pass.
(list) --
(dict) --
A filter used to determine which webhooks trigger a build.
type (string) --
The type of webhook filter. There are five webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , and FILE_PATH .
EVENT
A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.
Note
The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.
ACTOR_ACCOUNT_ID
A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .
HEAD_REF
A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .
Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.
BASE_REF
A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .
Note
Works with pull request events only.
FILE_PATH
A webhook triggers a build when the path of a changed file matches the regular expression pattern .
Note
Works with GitHub and GitHub Enterprise push events only.
pattern (string) --
For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.
For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .
excludeMatchedPattern (boolean) --
Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.
lastModifiedSecret (datetime) --
A timestamp that indicates the last time a repository's secret token was modified.
vpcConfig (dict) --
Information about the VPC configuration that AWS CodeBuild accesses.
vpcId (string) --
The ID of the Amazon VPC.
subnets (list) --
A list of one or more subnet IDs in your Amazon VPC.
securityGroupIds (list) --
A list of one or more security groups IDs in your Amazon VPC.
badge (dict) --
Information about the build badge for the build project.
badgeEnabled (boolean) --
Set this to true to generate a publicly accessible URL for your project's build badge.
badgeRequestUrl (string) --
The publicly-accessible URL through which you can access the build badge for your project.
The publicly accessible URL through which you can access the build badge for your project.
logsConfig (dict) --
Information about logs for the build project. A project can create logs in Amazon CloudWatch Logs, an S3 bucket, or both.
cloudWatchLogs (dict) --
Information about Amazon CloudWatch Logs for a build project. Amazon CloudWatch Logs are enabled by default.
status (string) --
The current status of the logs in Amazon CloudWatch Logs for a build project. Valid values are:
groupName (string) --
The group name of the logs in Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
streamName (string) --
The prefix of the stream name of the Amazon CloudWatch Logs. For more information, see Working with Log Groups and Log Streams .
s3Logs (dict) --
Information about logs built to an S3 bucket for a build project. S3 logs are not enabled by default.
status (string) --
The current status of the S3 build logs. Valid values are:
location (string) --
The ARN of an S3 bucket and the path prefix for S3 logs. If your Amazon S3 bucket name is my-bucket , and your path prefix is build-log , then acceptable formats are my-bucket/build-log or arn:aws:s3:::my-bucket/build-log .
encryptionDisabled (boolean) --
Set to true if you do not want your S3 build log output encrypted. By default S3 build logs are encrypted.
fileSystemLocations (list) --
An array of ProjectFileSystemLocation objects for a CodeBuild build project. A ProjectFileSystemLocation object specifies the identifier , location , mountOptions , mountPoint , and type of a file system created using Amazon Elastic File System.
(dict) --
Information about a file system created by Amazon Elastic File System (EFS). For more information, see What Is Amazon Elastic File System?
type (string) --
The type of the file system. The one supported type is EFS .
location (string) --
A string that specifies the location of the file system created by Amazon EFS. Its format is efs-dns-name:/directory-path . You can find the DNS name of file system when you view it in the AWS EFS console. The directory path is a path to a directory in the file system that CodeBuild mounts. For example, if the DNS name of a file system is fs-abcd1234.efs.us-west-2.amazonaws.com , and its mount directory is my-efs-mount-directory , then the location is fs-abcd1234.efs.us-west-2.amazonaws.com:/my-efs-mount-directory .
The directory path in the format efs-dns-name:/directory-path is optional. If you do not specify a directory path, the location is only the DNS name and CodeBuild mounts the entire file system.
mountPoint (string) --
The location in the container where you mount the file system.
identifier (string) --
The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_ . For example, if you specify my-efs for identifier , a new environment variable is create named CODEBUILD_MY-EFS .
The identifier is used to mount your file system.
mountOptions (string) --
The mount options for a file system created by AWS EFS. The default mount options used by CodeBuild are nfsvers=4.1,rsize=1048576,wsize=1048576,hard,timeo=600,retrans=2 . For more information, see Recommended NFS Mount Options .
Exceptions
Updates a report group.
See also: AWS API Documentation
Request Syntax
response = client.update_report_group(
arn='string',
exportConfig={
'exportConfigType': 'S3'|'NO_EXPORT',
's3Destination': {
'bucket': 'string',
'path': 'string',
'packaging': 'ZIP'|'NONE',
'encryptionKey': 'string',
'encryptionDisabled': True|False
}
},
tags=[
{
'key': 'string',
'value': 'string'
},
]
)
[REQUIRED]
The ARN of the report group to update.
Used to specify an updated export type. Valid values are:
The export configuration type. Valid values are:
A S3ReportExportConfig object that contains information about the S3 bucket where the run of a report is exported.
The name of the S3 bucket where the raw data of a report are exported.
The path to the exported report's raw data results.
The type of build output artifact to create. Valid values include:
The encryption key for the report's encrypted raw data.
A boolean value that specifies if the results of a report are encrypted.
An updated list of tag key and value pairs associated with this report group.
These tags are available for use by AWS services that support AWS CodeBuild report group tags.
A tag, consisting of a key and a value.
This tag is available for use by AWS services that support tags in AWS CodeBuild.
The tag's key.
The tag's value.
dict
Response Syntax
{
'reportGroup': {
'arn': 'string',
'name': 'string',
'type': 'TEST',
'exportConfig': {
'exportConfigType': 'S3'|'NO_EXPORT',
's3Destination': {
'bucket': 'string',
'path': 'string',
'packaging': 'ZIP'|'NONE',
'encryptionKey': 'string',
'encryptionDisabled': True|False
}
},
'created': datetime(2015, 1, 1),
'lastModified': datetime(2015, 1, 1),
'tags': [
{
'key': 'string',
'value': 'string'
},
]
}
}
Response Structure
(dict) --
reportGroup (dict) --
Information about the updated report group.
arn (string) --
The ARN of a ReportGroup .
name (string) --
The name of a ReportGroup .
type (string) --
The type of the ReportGroup . The one valid value is TEST .
exportConfig (dict) --
Information about the destination where the raw data of this ReportGroup is exported.
exportConfigType (string) --
The export configuration type. Valid values are:
s3Destination (dict) --
A S3ReportExportConfig object that contains information about the S3 bucket where the run of a report is exported.
bucket (string) --
The name of the S3 bucket where the raw data of a report are exported.
path (string) --
The path to the exported report's raw data results.
packaging (string) --
The type of build output artifact to create. Valid values include:
encryptionKey (string) --
The encryption key for the report's encrypted raw data.
encryptionDisabled (boolean) --
A boolean value that specifies if the results of a report are encrypted.
created (datetime) --
The date and time this ReportGroup was created.
lastModified (datetime) --
The date and time this ReportGroup was last modified.
tags (list) --
A list of tag key and value pairs associated with this report group.
These tags are available for use by AWS services that support AWS CodeBuild report group tags.
(dict) --
A tag, consisting of a key and a value.
This tag is available for use by AWS services that support tags in AWS CodeBuild.
key (string) --
The tag's key.
value (string) --
The tag's value.
Exceptions
Updates the webhook associated with an AWS CodeBuild build project.
Note
If you use Bitbucket for your repository, rotateSecret is ignored.
See also: AWS API Documentation
Request Syntax
response = client.update_webhook(
projectName='string',
branchFilter='string',
rotateSecret=True|False,
filterGroups=[
[
{
'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
'pattern': 'string',
'excludeMatchedPattern': True|False
},
],
]
)
[REQUIRED]
The name of the AWS CodeBuild project.
A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.
Note
It is recommended that you use filterGroups instead of branchFilter .
An array of arrays of WebhookFilter objects used to determine if a webhook event can trigger a build. A filter group must contain at least one EVENT WebhookFilter .
A filter used to determine which webhooks trigger a build.
The type of webhook filter. There are five webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , and FILE_PATH .
EVENT
A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.
Note
The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.
ACTOR_ACCOUNT_ID
A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .
HEAD_REF
A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .
Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.
BASE_REF
A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .
Note
Works with pull request events only.
FILE_PATH
A webhook triggers a build when the path of a changed file matches the regular expression pattern .
Note
Works with GitHub and GitHub Enterprise push events only.
For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.
For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .
Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.
dict
Response Syntax
{
'webhook': {
'url': 'string',
'payloadUrl': 'string',
'secret': 'string',
'branchFilter': 'string',
'filterGroups': [
[
{
'type': 'EVENT'|'BASE_REF'|'HEAD_REF'|'ACTOR_ACCOUNT_ID'|'FILE_PATH'|'COMMIT_MESSAGE',
'pattern': 'string',
'excludeMatchedPattern': True|False
},
],
],
'lastModifiedSecret': datetime(2015, 1, 1)
}
}
Response Structure
(dict) --
webhook (dict) --
Information about a repository's webhook that is associated with a project in AWS CodeBuild.
url (string) --
The URL to the webhook.
payloadUrl (string) --
The AWS CodeBuild endpoint where webhook events are sent.
secret (string) --
The secret token of the associated repository.
Note
A Bitbucket webhook does not support secret .
branchFilter (string) --
A regular expression used to determine which repository branches are built when a webhook is triggered. If the name of a branch matches the regular expression, then it is built. If branchFilter is empty, then all branches are built.
Note
It is recommended that you use filterGroups instead of branchFilter .
filterGroups (list) --
An array of arrays of WebhookFilter objects used to determine which webhooks are triggered. At least one WebhookFilter in the array must specify EVENT as its type .
For a build to be triggered, at least one filter group in the filterGroups array must pass. For a filter group to pass, each of its filters must pass.
(list) --
(dict) --
A filter used to determine which webhooks trigger a build.
type (string) --
The type of webhook filter. There are five webhook filter types: EVENT , ACTOR_ACCOUNT_ID , HEAD_REF , BASE_REF , and FILE_PATH .
EVENT
A webhook event triggers a build when the provided pattern matches one of five event types: PUSH , PULL_REQUEST_CREATED , PULL_REQUEST_UPDATED , PULL_REQUEST_REOPENED , and PULL_REQUEST_MERGED . The EVENT patterns are specified as a comma-separated string. For example, PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED filters all push, pull request created, and pull request updated events.
Note
The PULL_REQUEST_REOPENED works with GitHub and GitHub Enterprise only.
ACTOR_ACCOUNT_ID
A webhook event triggers a build when a GitHub, GitHub Enterprise, or Bitbucket account ID matches the regular expression pattern .
HEAD_REF
A webhook event triggers a build when the head reference matches the regular expression pattern . For example, refs/heads/branch-name and refs/tags/tag-name .
Works with GitHub and GitHub Enterprise push, GitHub and GitHub Enterprise pull request, Bitbucket push, and Bitbucket pull request events.
BASE_REF
A webhook event triggers a build when the base reference matches the regular expression pattern . For example, refs/heads/branch-name .
Note
Works with pull request events only.
FILE_PATH
A webhook triggers a build when the path of a changed file matches the regular expression pattern .
Note
Works with GitHub and GitHub Enterprise push events only.
pattern (string) --
For a WebHookFilter that uses EVENT type, a comma-separated string that specifies one or more events. For example, the webhook filter PUSH, PULL_REQUEST_CREATED, PULL_REQUEST_UPDATED allows all push, pull request created, and pull request updated events to trigger a build.
For a WebHookFilter that uses any of the other filter types, a regular expression pattern. For example, a WebHookFilter that uses HEAD_REF for its type and the pattern ^refs/heads/ triggers a build when the head reference is a branch with a reference name refs/heads/branch-name .
excludeMatchedPattern (boolean) --
Used to indicate that the pattern determines which webhook events do not trigger a build. If true, then a webhook event that does not match the pattern triggers a build. If false, then a webhook event that matches the pattern triggers a build.
lastModifiedSecret (datetime) --
A timestamp that indicates the last time a repository's secret token was modified.
Exceptions
The available paginators are:
paginator = client.get_paginator('describe_test_cases')
Creates an iterator that will paginate through responses from CodeBuild.Client.describe_test_cases().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
reportArn='string',
filter={
'status': 'string'
},
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The ARN of the report for which test cases are returned.
A TestCaseFilter object used to filter the returned reports.
The status used to filter test cases. Valid statuses are SUCCEEDED , FAILED , ERROR , SKIPPED , and UNKNOWN . A TestCaseFilter can have one status.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'testCases': [
{
'reportArn': 'string',
'testRawDataPath': 'string',
'prefix': 'string',
'name': 'string',
'status': 'string',
'durationInNanoSeconds': 123,
'message': 'string',
'expired': datetime(2015, 1, 1)
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
testCases (list) --
The returned list of test cases.
(dict) --
Information about a test case created using a framework such as NUnit or Cucumber. A test case might be a unit test or a configuration test.
reportArn (string) --
The ARN of the report to which the test case belongs.
testRawDataPath (string) --
The path to the raw data file that contains the test result.
prefix (string) --
A string that is applied to a series of related test cases. CodeBuild generates the prefix. The prefix depends on the framework used to generate the tests.
name (string) --
The name of the test case.
status (string) --
The status returned by the test case after it was run. Valid statuses are SUCCEEDED , FAILED , ERROR , SKIPPED , and UNKNOWN .
durationInNanoSeconds (integer) --
The number of nanoseconds it took to run this test case.
message (string) --
A message associated with a test case. For example, an error message or stack trace.
expired (datetime) --
The date and time a test case expires. A test case expires 30 days after it is created. An expired test case is not available to view in CodeBuild.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('list_builds')
Creates an iterator that will paginate through responses from CodeBuild.Client.list_builds().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
sortOrder='ASCENDING'|'DESCENDING',
PaginationConfig={
'MaxItems': 123,
'StartingToken': 'string'
}
)
The order to list build IDs. Valid values include:
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ids': [
'string',
],
'NextToken': 'string'
}
Response Structure
(dict) --
ids (list) --
A list of build IDs, with each build ID representing a single build.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('list_builds_for_project')
Creates an iterator that will paginate through responses from CodeBuild.Client.list_builds_for_project().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
projectName='string',
sortOrder='ASCENDING'|'DESCENDING',
PaginationConfig={
'MaxItems': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The name of the AWS CodeBuild project.
The order to list build IDs. Valid values include:
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ids': [
'string',
],
'NextToken': 'string'
}
Response Structure
(dict) --
ids (list) --
A list of build IDs for the specified build project, with each build ID representing a single build.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('list_projects')
Creates an iterator that will paginate through responses from CodeBuild.Client.list_projects().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
sortBy='NAME'|'CREATED_TIME'|'LAST_MODIFIED_TIME',
sortOrder='ASCENDING'|'DESCENDING',
PaginationConfig={
'MaxItems': 123,
'StartingToken': 'string'
}
)
The criterion to be used to list build project names. Valid values include:
Use sortOrder to specify in what order to list the build project names based on the preceding criteria.
The order in which to list build projects. Valid values include:
Use sortBy to specify the criterion to be used to list build project names.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'projects': [
'string',
],
'NextToken': 'string'
}
Response Structure
(dict) --
projects (list) --
The list of build project names, with each build project name representing a single build project.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('list_report_groups')
Creates an iterator that will paginate through responses from CodeBuild.Client.list_report_groups().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
sortOrder='ASCENDING'|'DESCENDING',
sortBy='NAME'|'CREATED_TIME'|'LAST_MODIFIED_TIME',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The criterion to be used to list build report groups. Valid values include:
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'reportGroups': [
'string',
],
'NextToken': 'string'
}
Response Structure
(dict) --
reportGroups (list) --
The list of ARNs for the report groups in the current AWS account.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('list_reports')
Creates an iterator that will paginate through responses from CodeBuild.Client.list_reports().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
sortOrder='ASCENDING'|'DESCENDING',
filter={
'status': 'GENERATING'|'SUCCEEDED'|'FAILED'|'INCOMPLETE'|'DELETING'
},
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
Specifies the sort order for the list of returned reports. Valid values are:
A ReportFilter object used to filter the returned reports.
The status used to filter reports. You can filter using one status only.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'reports': [
'string',
],
'NextToken': 'string'
}
Response Structure
(dict) --
reports (list) --
The list of returned ARNs for the reports in the current AWS account.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('list_reports_for_report_group')
Creates an iterator that will paginate through responses from CodeBuild.Client.list_reports_for_report_group().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
reportGroupArn='string',
sortOrder='ASCENDING'|'DESCENDING',
filter={
'status': 'GENERATING'|'SUCCEEDED'|'FAILED'|'INCOMPLETE'|'DELETING'
},
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The ARN of the report group for which you want to return report ARNs.
A ReportFilter object used to filter the returned reports.
The status used to filter reports. You can filter using one status only.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'reports': [
'string',
],
'NextToken': 'string'
}
Response Structure
(dict) --
reports (list) --
The list of returned report group ARNs.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('list_shared_projects')
Creates an iterator that will paginate through responses from CodeBuild.Client.list_shared_projects().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
sortBy='ARN'|'MODIFIED_TIME',
sortOrder='ASCENDING'|'DESCENDING',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The criterion to be used to list build projects shared with the current AWS account or user. Valid values include:
The order in which to list shared build projects. Valid values include:
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'projects': [
'string',
],
'NextToken': 'string'
}
Response Structure
(dict) --
projects (list) --
The list of ARNs for the build projects shared with the current AWS account or user.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('list_shared_report_groups')
Creates an iterator that will paginate through responses from CodeBuild.Client.list_shared_report_groups().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
sortOrder='ASCENDING'|'DESCENDING',
sortBy='ARN'|'MODIFIED_TIME',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The order in which to list shared report groups. Valid values include:
The criterion to be used to list report groups shared with the current AWS account or user. Valid values include:
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'reportGroups': [
'string',
],
'NextToken': 'string'
}
Response Structure
(dict) --
reportGroups (list) --
The list of ARNs for the report groups shared with the current AWS account or user.
NextToken (string) --
A token to resume pagination.