GlobalAccelerator

Table of Contents

Client

class GlobalAccelerator.Client

A low-level client representing AWS Global Accelerator

This is the AWS Global Accelerator API Reference . This guide is for developers who need detailed information about AWS Global Accelerator API actions, data types, and errors. For more information about Global Accelerator features, see the AWS Global Accelerator Developer Guide .

AWS Global Accelerator is a service in which you create accelerators to improve the performance of your applications for local and global users. Depending on the type of accelerator you choose, you can gain additional benefits.

  • By using a standard accelerator, you can improve availability of your internet applications that are used by a global audience. With a standard accelerator, Global Accelerator directs traffic to optimal endpoints over the AWS global network.
  • For other scenarios, you might choose a custom routing accelerator. With a custom routing accelerator, you can use application logic to directly map one or more users to a specific endpoint among many endpoints.

Warning

Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.

By default, Global Accelerator provides you with two static IP addresses that you associate with your accelerator. With a standard accelerator, instead of using the IP addresses that Global Accelerator provides, you can configure these entry points to be IPv4 addresses from your own IP address ranges that you bring to Global Accelerator. The static IP addresses are anycast from the AWS edge network. For a standard accelerator, they distribute incoming application traffic across multiple endpoint resources in multiple AWS Regions, which increases the availability of your applications. Endpoints for standard accelerators can be Network Load Balancers, Application Load Balancers, Amazon EC2 instances, or Elastic IP addresses that are located in one AWS Region or multiple Regions. For custom routing accelerators, you map traffic that arrives to the static IP addresses to specific Amazon EC2 servers in endpoints that are virtual private cloud (VPC) subnets.

Warning

The static IP addresses remain assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to it, so you can no longer route traffic by using them. You can use IAM policies like tag-based permissions with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Tag-based policies .

For standard accelerators, Global Accelerator uses the AWS global network to route traffic to the optimal regional endpoint based on health, client location, and policies that you configure. The service reacts instantly to changes in health or configuration to ensure that internet traffic from clients is always directed to healthy endpoints.

For a list of the AWS Regions where Global Accelerator and other services are currently supported, see the AWS Region Table .

AWS Global Accelerator includes the following components:

Static IP addresses

Global Accelerator provides you with a set of two static IP addresses that are anycast from the AWS edge network. If you bring your own IP address range to AWS (BYOIP) to use with a standard accelerator, you can instead assign IP addresses from your own pool to use with your accelerator. For more information, see Bring your own IP addresses (BYOIP) in AWS Global Accelerator .

The IP addresses serve as single fixed entry points for your clients. If you already have Elastic Load Balancing load balancers, Amazon EC2 instances, or Elastic IP address resources set up for your applications, you can easily add those to a standard accelerator in Global Accelerator. This allows Global Accelerator to use static IP addresses to access the resources.

The static IP addresses remain assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to it, so you can no longer route traffic by using them. You can use IAM policies like tag-based permissions with Global Accelerator to delete an accelerator. For more information, see Tag-based policies .

Accelerator

An accelerator directs traffic to endpoints over the AWS global network to improve the performance of your internet applications. Each accelerator includes one or more listeners.

There are two types of accelerators:

  • A standard accelerator directs traffic to the optimal AWS endpoint based on several factors, including the user’s location, the health of the endpoint, and the endpoint weights that you configure. This improves the availability and performance of your applications. Endpoints can be Network Load Balancers, Application Load Balancers, Amazon EC2 instances, or Elastic IP addresses.
  • A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instances running in a single or multiple virtual private clouds (VPCs). With custom routing, listener ports are mapped to statically associate port ranges with VPC subnets, which allows Global Accelerator to determine an EC2 instance IP address at the time of connection. By default, all port mapping destinations in a VPC subnet can't receive traffic. You can choose to configure all destinations in the subnet to receive traffic, or to specify individual port mappings that can receive traffic.

For more information, see Types of accelerators .

DNS name

Global Accelerator assigns each accelerator a default Domain Name System (DNS) name, similar to a1234567890abcdef.awsglobalaccelerator.com , that points to the static IP addresses that Global Accelerator assigns to you or that you choose from your own IP address range. Depending on the use case, you can use your accelerator's static IP addresses or DNS name to route traffic to your accelerator, or set up DNS records to route traffic using your own custom domain name.

Network zone

A network zone services the static IP addresses for your accelerator from a unique IP subnet. Similar to an AWS Availability Zone, a network zone is an isolated unit with its own set of physical infrastructure. When you configure an accelerator, by default, Global Accelerator allocates two IPv4 addresses for it. If one IP address from a network zone becomes unavailable due to IP address blocking by certain client networks, or network disruptions, then client applications can retry on the healthy static IP address from the other isolated network zone.

Listener

A listener processes inbound connections from clients to Global Accelerator, based on the port (or port range) and protocol (or protocols) that you configure. A listener can be configured for TCP, UDP, or both TCP and UDP protocols. Each listener has one or more endpoint groups associated with it, and traffic is forwarded to endpoints in one of the groups. You associate endpoint groups with listeners by specifying the Regions that you want to distribute traffic to. With a standard accelerator, traffic is distributed to optimal endpoints within the endpoint groups associated with a listener.

Endpoint group

Each endpoint group is associated with a specific AWS Region. Endpoint groups include one or more endpoints in the Region. With a standard accelerator, you can increase or reduce the percentage of traffic that would be otherwise directed to an endpoint group by adjusting a setting called a traffic dial . The traffic dial lets you easily do performance testing or blue/green deployment testing, for example, for new releases across different AWS Regions.

Endpoint

An endpoint is a resource that Global Accelerator directs traffic to.

Endpoints for standard accelerators can be Network Load Balancers, Application Load Balancers, Amazon EC2 instances, or Elastic IP addresses. An Application Load Balancer endpoint can be internet-facing or internal. Traffic for standard accelerators is routed to endpoints based on the health of the endpoint along with configuration options that you choose, such as endpoint weights. For each endpoint, you can configure weights, which are numbers that you can use to specify the proportion of traffic to route to each one. This can be useful, for example, to do performance testing within a Region.

Endpoints for custom routing accelerators are virtual private cloud (VPC) subnets with one or many EC2 instances.

import boto3

client = boto3.client('globalaccelerator')

These are the available methods:

add_custom_routing_endpoints(**kwargs)

Associate a virtual private cloud (VPC) subnet endpoint with your custom routing accelerator.

The listener port range must be large enough to support the number of IP addresses that can be specified in your subnet. The number of ports required is: subnet size times the number of ports per destination EC2 instances. For example, a subnet defined as /24 requires a listener port range of at least 255 ports.

Note: You must have enough remaining listener ports available to map to the subnet ports, or the call will fail with a LimitExceededException.

By default, all destinations in a subnet in a custom routing accelerator cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic operation.

See also: AWS API Documentation

Request Syntax

response = client.add_custom_routing_endpoints(
    EndpointConfigurations=[
        {
            'EndpointId': 'string'
        },
    ],
    EndpointGroupArn='string'
)
Parameters
  • EndpointConfigurations (list) --

    [REQUIRED]

    The list of endpoint objects to add to a custom routing accelerator.

    • (dict) --

      The list of endpoint objects. For custom routing, this is a list of virtual private cloud (VPC) subnet IDs.

      • EndpointId (string) --

        An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.

  • EndpointGroupArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the endpoint group for the custom routing endpoint.

Return type

dict

Returns

Response Syntax

{
    'EndpointDescriptions': [
        {
            'EndpointId': 'string'
        },
    ],
    'EndpointGroupArn': 'string'
}

Response Structure

  • (dict) --

    • EndpointDescriptions (list) --

      The endpoint objects added to the custom routing accelerator.

      • (dict) --

        A complex type for an endpoint for a custom routing accelerator. Each endpoint group can include one or more endpoints, which are virtual private cloud (VPC) subnets.

        • EndpointId (string) --

          An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.

    • EndpointGroupArn (string) --

      The Amazon Resource Name (ARN) of the endpoint group for the custom routing endpoint.

Exceptions

  • GlobalAccelerator.Client.exceptions.EndpointAlreadyExistsException
  • GlobalAccelerator.Client.exceptions.EndpointGroupNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.LimitExceededException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
  • GlobalAccelerator.Client.exceptions.ConflictException
advertise_byoip_cidr(**kwargs)

Advertises an IPv4 address range that is provisioned for use with your AWS resources through bring your own IP addresses (BYOIP). It can take a few minutes before traffic to the specified addresses starts routing to AWS because of propagation delays.

To stop advertising the BYOIP address range, use WithdrawByoipCidr .

For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide .

See also: AWS API Documentation

Request Syntax

response = client.advertise_byoip_cidr(
    Cidr='string'
)
Parameters
Cidr (string) --

[REQUIRED]

The address range, in CIDR notation. This must be the exact range that you provisioned. You can't advertise only a portion of the provisioned range.

Return type
dict
Returns
Response Syntax
{
    'ByoipCidr': {
        'Cidr': 'string',
        'State': 'PENDING_PROVISIONING'|'READY'|'PENDING_ADVERTISING'|'ADVERTISING'|'PENDING_WITHDRAWING'|'PENDING_DEPROVISIONING'|'DEPROVISIONED'|'FAILED_PROVISION'|'FAILED_ADVERTISING'|'FAILED_WITHDRAW'|'FAILED_DEPROVISION',
        'Events': [
            {
                'Message': 'string',
                'Timestamp': datetime(2015, 1, 1)
            },
        ]
    }
}

Response Structure

  • (dict) --
    • ByoipCidr (dict) --

      Information about the address range.

      • Cidr (string) --

        The address range, in CIDR notation.

      • State (string) --

        The state of the address pool.

      • Events (list) --

        A history of status changes for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

        • (dict) --

          A complex type that contains a Message and a Timestamp value for changes that you make in the status an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

          • Message (string) --

            A string that contains an Event message describing changes that you make in the status of an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

          • Timestamp (datetime) --

            A timestamp when you make a status change for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

Exceptions

  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
  • GlobalAccelerator.Client.exceptions.ByoipCidrNotFoundException
  • GlobalAccelerator.Client.exceptions.IncorrectCidrStateException
allow_custom_routing_traffic(**kwargs)

Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that can receive traffic for a custom routing accelerator. You can allow traffic to all destinations in the subnet endpoint, or allow traffic to a specified list of destination IP addresses and ports in the subnet. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.

After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.

See also: AWS API Documentation

Request Syntax

response = client.allow_custom_routing_traffic(
    EndpointGroupArn='string',
    EndpointId='string',
    DestinationAddresses=[
        'string',
    ],
    DestinationPorts=[
        123,
    ],
    AllowAllTrafficToEndpoint=True|False
)
Parameters
  • EndpointGroupArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the endpoint group.

  • EndpointId (string) --

    [REQUIRED]

    An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.

  • DestinationAddresses (list) --

    A list of specific Amazon EC2 instance IP addresses (destination addresses) in a subnet that you want to allow to receive traffic. The IP addresses must be a subset of the IP addresses that you specified for the endpoint group.

    DestinationAddresses is required if AllowAllTrafficToEndpoint is FALSE or is not specified.
    • (string) --
  • DestinationPorts (list) --

    A list of specific Amazon EC2 instance ports (destination ports) that you want to allow to receive traffic.

    • (integer) --
  • AllowAllTrafficToEndpoint (boolean) --

    Indicates whether all destination IP addresses and ports for a specified VPC subnet endpoint can receive traffic from a custom routing accelerator. The value is TRUE or FALSE.

    When set to TRUE, all destinations in the custom routing VPC subnet can receive traffic. Note that you cannot specify destination IP addresses and ports when the value is set to TRUE.

    When set to FALSE (or not specified), you must specify a list of destination IP addresses that are allowed to receive traffic. A list of ports is optional. If you don't specify a list of ports, the ports that can accept traffic is the same as the ports configured for the endpoint group.

    The default value is FALSE.

Returns

None

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
can_paginate(operation_name)

Check if an operation can be paginated.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Returns
True if the operation can be paginated, False otherwise.
create_accelerator(**kwargs)

Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers.

Warning

Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.

See also: AWS API Documentation

Request Syntax

response = client.create_accelerator(
    Name='string',
    IpAddressType='IPV4',
    IpAddresses=[
        'string',
    ],
    Enabled=True|False,
    IdempotencyToken='string',
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ]
)
Parameters
  • Name (string) --

    [REQUIRED]

    The name of an accelerator. The name can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.

  • IpAddressType (string) -- The value for the address type must be IPv4.
  • IpAddresses (list) --

    Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose IP addresses from your own pool to use for the accelerator's static IP addresses when you create an accelerator. You can specify one or two addresses, separated by a space. Do not include the /32 suffix.

    Only one IP address from each of your IP address ranges can be used for each accelerator. If you specify only one IP address from your IP address range, Global Accelerator assigns a second static IP address for the accelerator from the AWS IP address pool.

    Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses.

    For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide .

    • (string) --
  • Enabled (boolean) --

    Indicates whether an accelerator is enabled. The value is true or false. The default value is true.

    If the value is set to true, an accelerator cannot be deleted. If set to false, the accelerator can be deleted.

  • IdempotencyToken (string) --

    [REQUIRED]

    A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of an accelerator.

    This field is autopopulated if not provided.

  • Tags (list) --

    Create tags for an accelerator.

    For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide .

    • (dict) --

      A complex type that contains a Tag key and Tag value.

      • Key (string) -- [REQUIRED]

        A string that contains a Tag key.

      • Value (string) -- [REQUIRED]

        A string that contains a Tag value.

Return type

dict

Returns

Response Syntax

{
    'Accelerator': {
        'AcceleratorArn': 'string',
        'Name': 'string',
        'IpAddressType': 'IPV4',
        'Enabled': True|False,
        'IpSets': [
            {
                'IpFamily': 'string',
                'IpAddresses': [
                    'string',
                ]
            },
        ],
        'DnsName': 'string',
        'Status': 'DEPLOYED'|'IN_PROGRESS',
        'CreatedTime': datetime(2015, 1, 1),
        'LastModifiedTime': datetime(2015, 1, 1)
    }
}

Response Structure

  • (dict) --

    • Accelerator (dict) --

      The accelerator that is created by specifying a listener and the supported IP address types.

      • AcceleratorArn (string) --

        The Amazon Resource Name (ARN) of the accelerator.

      • Name (string) --

        The name of the accelerator. The name must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.

      • IpAddressType (string) --

        The value for the address type must be IPv4.

      • Enabled (boolean) --

        Indicates whether the accelerator is enabled. The value is true or false. The default value is true.

        If the value is set to true, the accelerator cannot be deleted. If set to false, accelerator can be deleted.

      • IpSets (list) --

        The static IP addresses that Global Accelerator associates with the accelerator.

        • (dict) --

          A complex type for the set of IP addresses for an accelerator.

          • IpFamily (string) --

            The types of IP addresses included in this IP set.

          • IpAddresses (list) --

            The array of IP addresses in the IP address set. An IP address set can have a maximum of two IP addresses.

            • (string) --
      • DnsName (string) --

        The Domain Name System (DNS) name that Global Accelerator creates that points to your accelerator's static IP addresses.

        The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com.

        For more information about the default DNS name, see Support for DNS Addressing in Global Accelerator in the AWS Global Accelerator Developer Guide .

      • Status (string) --

        Describes the deployment status of the accelerator.

      • CreatedTime (datetime) --

        The date and time that the accelerator was created.

      • LastModifiedTime (datetime) --

        The date and time that the accelerator was last modified.

Exceptions

  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.LimitExceededException
create_custom_routing_accelerator(**kwargs)

Create a custom routing accelerator. A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instance destinations running in a single or multiple virtual private clouds (VPC) subnet endpoints.

Be aware that, by default, all destination EC2 instances in a VPC subnet endpoint cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic operation.

Warning

Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.

See also: AWS API Documentation

Request Syntax

response = client.create_custom_routing_accelerator(
    Name='string',
    IpAddressType='IPV4',
    IpAddresses=[
        'string',
    ],
    Enabled=True|False,
    IdempotencyToken='string',
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ]
)
Parameters
  • Name (string) --

    [REQUIRED]

    The name of a custom routing accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.

  • IpAddressType (string) -- The value for the address type must be IPv4.
  • IpAddresses (list) --

    Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose IP addresses from your own pool to use for the accelerator's static IP addresses when you create an accelerator. You can specify one or two addresses, separated by a space. Do not include the /32 suffix.

    Only one IP address from each of your IP address ranges can be used for each accelerator. If you specify only one IP address from your IP address range, Global Accelerator assigns a second static IP address for the accelerator from the AWS IP address pool.

    Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses.

    For more information, see Bring your own IP addresses (BYOIP) in the AWS Global Accelerator Developer Guide .

    • (string) --
  • Enabled (boolean) --

    Indicates whether an accelerator is enabled. The value is true or false. The default value is true.

    If the value is set to true, an accelerator cannot be deleted. If set to false, the accelerator can be deleted.

  • IdempotencyToken (string) --

    [REQUIRED]

    A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.

    This field is autopopulated if not provided.

  • Tags (list) --

    Create tags for an accelerator.

    For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide .

    • (dict) --

      A complex type that contains a Tag key and Tag value.

      • Key (string) -- [REQUIRED]

        A string that contains a Tag key.

      • Value (string) -- [REQUIRED]

        A string that contains a Tag value.

Return type

dict

Returns

Response Syntax

{
    'Accelerator': {
        'AcceleratorArn': 'string',
        'Name': 'string',
        'IpAddressType': 'IPV4',
        'Enabled': True|False,
        'IpSets': [
            {
                'IpFamily': 'string',
                'IpAddresses': [
                    'string',
                ]
            },
        ],
        'DnsName': 'string',
        'Status': 'DEPLOYED'|'IN_PROGRESS',
        'CreatedTime': datetime(2015, 1, 1),
        'LastModifiedTime': datetime(2015, 1, 1)
    }
}

Response Structure

  • (dict) --

    • Accelerator (dict) --

      The accelerator that is created.

      • AcceleratorArn (string) --

        The Amazon Resource Name (ARN) of the custom routing accelerator.

      • Name (string) --

        The name of the accelerator. The name must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.

      • IpAddressType (string) --

        The value for the address type must be IPv4.

      • Enabled (boolean) --

        Indicates whether the accelerator is enabled. The value is true or false. The default value is true.

        If the value is set to true, the accelerator cannot be deleted. If set to false, accelerator can be deleted.

      • IpSets (list) --

        The static IP addresses that Global Accelerator associates with the accelerator.

        • (dict) --

          A complex type for the set of IP addresses for an accelerator.

          • IpFamily (string) --

            The types of IP addresses included in this IP set.

          • IpAddresses (list) --

            The array of IP addresses in the IP address set. An IP address set can have a maximum of two IP addresses.

            • (string) --
      • DnsName (string) --

        The Domain Name System (DNS) name that Global Accelerator creates that points to your accelerator's static IP addresses.

        The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com.

        For more information about the default DNS name, see Support for DNS Addressing in Global Accelerator in the AWS Global Accelerator Developer Guide .

      • Status (string) --

        Describes the deployment status of the accelerator.

      • CreatedTime (datetime) --

        The date and time that the accelerator was created.

      • LastModifiedTime (datetime) --

        The date and time that the accelerator was last modified.

Exceptions

  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.LimitExceededException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
create_custom_routing_endpoint_group(**kwargs)

Create an endpoint group for the specified listener for a custom routing accelerator. An endpoint group is a collection of endpoints in one AWS Region.

See also: AWS API Documentation

Request Syntax

response = client.create_custom_routing_endpoint_group(
    ListenerArn='string',
    EndpointGroupRegion='string',
    DestinationConfigurations=[
        {
            'FromPort': 123,
            'ToPort': 123,
            'Protocols': [
                'TCP'|'UDP',
            ]
        },
    ],
    IdempotencyToken='string'
)
Parameters
  • ListenerArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the listener for a custom routing endpoint.

  • EndpointGroupRegion (string) --

    [REQUIRED]

    The AWS Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.

  • DestinationConfigurations (list) --

    [REQUIRED]

    Sets the port range and protocol for all endpoints (virtual private cloud subnets) in a custom routing endpoint group to accept client traffic on.

    • (dict) --

      For a custom routing accelerator, sets the port range and protocol for all endpoints (virtual private cloud subnets) in an endpoint group to accept client traffic on.

      • FromPort (integer) -- [REQUIRED]

        The first port, inclusive, in the range of ports for the endpoint group that is associated with a custom routing accelerator.

      • ToPort (integer) -- [REQUIRED]

        The last port, inclusive, in the range of ports for the endpoint group that is associated with a custom routing accelerator.

      • Protocols (list) -- [REQUIRED]

        The protocol for the endpoint group that is associated with a custom routing accelerator. The protocol can be either TCP or UDP.

        • (string) --
  • IdempotencyToken (string) --

    [REQUIRED]

    A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.

    This field is autopopulated if not provided.

Return type

dict

Returns

Response Syntax

{
    'EndpointGroup': {
        'EndpointGroupArn': 'string',
        'EndpointGroupRegion': 'string',
        'DestinationDescriptions': [
            {
                'FromPort': 123,
                'ToPort': 123,
                'Protocols': [
                    'TCP'|'UDP',
                ]
            },
        ],
        'EndpointDescriptions': [
            {
                'EndpointId': 'string'
            },
        ]
    }
}

Response Structure

  • (dict) --

    • EndpointGroup (dict) --

      The information about the endpoint group created for a custom routing accelerator.

      • EndpointGroupArn (string) --

        The Amazon Resource Name (ARN) of the endpoint group.

      • EndpointGroupRegion (string) --

        The AWS Region where the endpoint group is located.

      • DestinationDescriptions (list) --

        For a custom routing accelerator, describes the port range and protocol for all endpoints (virtual private cloud subnets) in an endpoint group to accept client traffic on.

        • (dict) --

          For a custom routing accelerator, describes the port range and protocol for all endpoints (virtual private cloud subnets) in an endpoint group to accept client traffic on.

          • FromPort (integer) --

            The first port, inclusive, in the range of ports for the endpoint group that is associated with a custom routing accelerator.

          • ToPort (integer) --

            The last port, inclusive, in the range of ports for the endpoint group that is associated with a custom routing accelerator.

          • Protocols (list) --

            The protocol for the endpoint group that is associated with a custom routing accelerator. The protocol can be either TCP or UDP.

            • (string) --
      • EndpointDescriptions (list) --

        For a custom routing accelerator, describes the endpoints (virtual private cloud subnets) in an endpoint group to accept client traffic on.

        • (dict) --

          A complex type for an endpoint for a custom routing accelerator. Each endpoint group can include one or more endpoints, which are virtual private cloud (VPC) subnets.

          • EndpointId (string) --

            An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.EndpointGroupAlreadyExistsException
  • GlobalAccelerator.Client.exceptions.ListenerNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.InvalidPortRangeException
  • GlobalAccelerator.Client.exceptions.LimitExceededException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
create_custom_routing_listener(**kwargs)

Create a listener to process inbound connections from clients to a custom routing accelerator. Connections arrive to assigned static IP addresses on the port range that you specify.

See also: AWS API Documentation

Request Syntax

response = client.create_custom_routing_listener(
    AcceleratorArn='string',
    PortRanges=[
        {
            'FromPort': 123,
            'ToPort': 123
        },
    ],
    IdempotencyToken='string'
)
Parameters
  • AcceleratorArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the accelerator for a custom routing listener.

  • PortRanges (list) --

    [REQUIRED]

    The port range to support for connections from clients to your accelerator.

    Separately, you set port ranges for endpoints. For more information, see About endpoints for custom routing accelerators .

    • (dict) --

      A complex type for a range of ports for a listener.

      • FromPort (integer) --

        The first port in the range of ports, inclusive.

      • ToPort (integer) --

        The last port in the range of ports, inclusive.

  • IdempotencyToken (string) --

    [REQUIRED]

    A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.

    This field is autopopulated if not provided.

Return type

dict

Returns

Response Syntax

{
    'Listener': {
        'ListenerArn': 'string',
        'PortRanges': [
            {
                'FromPort': 123,
                'ToPort': 123
            },
        ]
    }
}

Response Structure

  • (dict) --

    • Listener (dict) --

      The listener that you've created for a custom routing accelerator.

      • ListenerArn (string) --

        The Amazon Resource Name (ARN) of the listener.

      • PortRanges (list) --

        The port range to support for connections from clients to your accelerator.

        Separately, you set port ranges for endpoints. For more information, see About endpoints for custom routing accelerators .

        • (dict) --

          A complex type for a range of ports for a listener.

          • FromPort (integer) --

            The first port in the range of ports, inclusive.

          • ToPort (integer) --

            The last port in the range of ports, inclusive.

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InvalidPortRangeException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.LimitExceededException
create_endpoint_group(**kwargs)

Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one AWS Region. A resource must be valid and active when you add it as an endpoint.

See also: AWS API Documentation

Request Syntax

response = client.create_endpoint_group(
    ListenerArn='string',
    EndpointGroupRegion='string',
    EndpointConfigurations=[
        {
            'EndpointId': 'string',
            'Weight': 123,
            'ClientIPPreservationEnabled': True|False
        },
    ],
    TrafficDialPercentage=...,
    HealthCheckPort=123,
    HealthCheckProtocol='TCP'|'HTTP'|'HTTPS',
    HealthCheckPath='string',
    HealthCheckIntervalSeconds=123,
    ThresholdCount=123,
    IdempotencyToken='string',
    PortOverrides=[
        {
            'ListenerPort': 123,
            'EndpointPort': 123
        },
    ]
)
Parameters
  • ListenerArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the listener.

  • EndpointGroupRegion (string) --

    [REQUIRED]

    The AWS Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.

  • EndpointConfigurations (list) --

    The list of endpoint objects.

    • (dict) --

      A complex type for endpoints. A resource must be valid and active when you add it as an endpoint.

      • EndpointId (string) --

        An ID for the endpoint. If the endpoint is a Network Load Balancer or Application Load Balancer, this is the Amazon Resource Name (ARN) of the resource. If the endpoint is an Elastic IP address, this is the Elastic IP address allocation ID. For Amazon EC2 instances, this is the EC2 instance ID. A resource must be valid and active when you add it as an endpoint.

        An Application Load Balancer can be either internal or internet-facing.

      • Weight (integer) --

        The weight associated with the endpoint. When you add weights to endpoints, you configure AWS Global Accelerator to route traffic based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20 is routed to the last endpoint. For more information, see Endpoint Weights in the AWS Global Accelerator Developer Guide .

      • ClientIPPreservationEnabled (boolean) --

        Indicates whether client IP address preservation is enabled for an Application Load Balancer endpoint. The value is true or false. The default value is true for new accelerators.

        If the value is set to true, the client's IP address is preserved in the X-Forwarded-For request header as traffic travels to applications on the Application Load Balancer endpoint fronted by the accelerator.

        For more information, see Preserve Client IP Addresses in AWS Global Accelerator in the AWS Global Accelerator Developer Guide .

  • TrafficDialPercentage (float) --

    The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.

    Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.

    The default value is 100.

  • HealthCheckPort (integer) -- The port that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If listener port is a list of ports, Global Accelerator uses the first port in the list.
  • HealthCheckProtocol (string) -- The protocol that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.
  • HealthCheckPath (string) -- If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The default value is slash (/).
  • HealthCheckIntervalSeconds (integer) -- The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.
  • ThresholdCount (integer) -- The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.
  • IdempotencyToken (string) --

    [REQUIRED]

    A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.

    This field is autopopulated if not provided.

  • PortOverrides (list) --

    Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

    For more information, see Port overrides in the AWS Global Accelerator Developer Guide .

    • (dict) --

      Override specific listener ports used to route traffic to endpoints that are part of an endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

      For more information, see Port overrides in the AWS Global Accelerator Developer Guide .

      • ListenerPort (integer) --

        The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.

      • EndpointPort (integer) --

        The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

Return type

dict

Returns

Response Syntax

{
    'EndpointGroup': {
        'EndpointGroupArn': 'string',
        'EndpointGroupRegion': 'string',
        'EndpointDescriptions': [
            {
                'EndpointId': 'string',
                'Weight': 123,
                'HealthState': 'INITIAL'|'HEALTHY'|'UNHEALTHY',
                'HealthReason': 'string',
                'ClientIPPreservationEnabled': True|False
            },
        ],
        'TrafficDialPercentage': ...,
        'HealthCheckPort': 123,
        'HealthCheckProtocol': 'TCP'|'HTTP'|'HTTPS',
        'HealthCheckPath': 'string',
        'HealthCheckIntervalSeconds': 123,
        'ThresholdCount': 123,
        'PortOverrides': [
            {
                'ListenerPort': 123,
                'EndpointPort': 123
            },
        ]
    }
}

Response Structure

  • (dict) --

    • EndpointGroup (dict) --

      The information about the endpoint group that was created.

      • EndpointGroupArn (string) --

        The Amazon Resource Name (ARN) of the endpoint group.

      • EndpointGroupRegion (string) --

        The AWS Region where the endpoint group is located.

      • EndpointDescriptions (list) --

        The list of endpoint objects.

        • (dict) --

          A complex type for an endpoint. Each endpoint group can include one or more endpoints, such as load balancers.

          • EndpointId (string) --

            An ID for the endpoint. If the endpoint is a Network Load Balancer or Application Load Balancer, this is the Amazon Resource Name (ARN) of the resource. If the endpoint is an Elastic IP address, this is the Elastic IP address allocation ID. For Amazon EC2 instances, this is the EC2 instance ID.

            An Application Load Balancer can be either internal or internet-facing.

          • Weight (integer) --

            The weight associated with the endpoint. When you add weights to endpoints, you configure AWS Global Accelerator to route traffic based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20 is routed to the last endpoint. For more information, see Endpoint Weights in the AWS Global Accelerator Developer Guide .

          • HealthState (string) --

            The health status of the endpoint.

          • HealthReason (string) --

            Returns a null result.

          • ClientIPPreservationEnabled (boolean) --

            Indicates whether client IP address preservation is enabled for an Application Load Balancer endpoint. The value is true or false. The default value is true for new accelerators.

            If the value is set to true, the client's IP address is preserved in the X-Forwarded-For request header as traffic travels to applications on the Application Load Balancer endpoint fronted by the accelerator.

            For more information, see Viewing Client IP Addresses in AWS Global Accelerator in the AWS Global Accelerator Developer Guide .

      • TrafficDialPercentage (float) --

        The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.

        Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.

        The default value is 100.

      • HealthCheckPort (integer) --

        The port that Global Accelerator uses to perform health checks on endpoints that are part of this endpoint group.

        The default port is the port for the listener that this endpoint group is associated with. If the listener port is a list, Global Accelerator uses the first specified port in the list of ports.

      • HealthCheckProtocol (string) --

        The protocol that Global Accelerator uses to perform health checks on endpoints that are part of this endpoint group. The default value is TCP.

      • HealthCheckPath (string) --

        If the protocol is HTTP/S, then this value provides the ping path that Global Accelerator uses for the destination on the endpoints for health checks. The default is slash (/).

      • HealthCheckIntervalSeconds (integer) --

        The time—10 seconds or 30 seconds—between health checks for each endpoint. The default value is 30.

      • ThresholdCount (integer) --

        The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.

      • PortOverrides (list) --

        Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you to map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on.

        • (dict) --

          Override specific listener ports used to route traffic to endpoints that are part of an endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

          For more information, see Port overrides in the AWS Global Accelerator Developer Guide .

          • ListenerPort (integer) --

            The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.

          • EndpointPort (integer) --

            The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.EndpointGroupAlreadyExistsException
  • GlobalAccelerator.Client.exceptions.ListenerNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.LimitExceededException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
create_listener(**kwargs)

Create a listener to process inbound connections from clients to an accelerator. Connections arrive to assigned static IP addresses on a port, port range, or list of port ranges that you specify.

See also: AWS API Documentation

Request Syntax

response = client.create_listener(
    AcceleratorArn='string',
    PortRanges=[
        {
            'FromPort': 123,
            'ToPort': 123
        },
    ],
    Protocol='TCP'|'UDP',
    ClientAffinity='NONE'|'SOURCE_IP',
    IdempotencyToken='string'
)
Parameters
  • AcceleratorArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of your accelerator.

  • PortRanges (list) --

    [REQUIRED]

    The list of port ranges to support for connections from clients to your accelerator.

    • (dict) --

      A complex type for a range of ports for a listener.

      • FromPort (integer) --

        The first port in the range of ports, inclusive.

      • ToPort (integer) --

        The last port in the range of ports, inclusive.

  • Protocol (string) --

    [REQUIRED]

    The protocol for connections from clients to your accelerator.

  • ClientAffinity (string) --

    Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint.

    AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE , Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.

    If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value.

    The default value is NONE .

  • IdempotencyToken (string) --

    [REQUIRED]

    A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.

    This field is autopopulated if not provided.

Return type

dict

Returns

Response Syntax

{
    'Listener': {
        'ListenerArn': 'string',
        'PortRanges': [
            {
                'FromPort': 123,
                'ToPort': 123
            },
        ],
        'Protocol': 'TCP'|'UDP',
        'ClientAffinity': 'NONE'|'SOURCE_IP'
    }
}

Response Structure

  • (dict) --

    • Listener (dict) --

      The listener that you've created.

      • ListenerArn (string) --

        The Amazon Resource Name (ARN) of the listener.

      • PortRanges (list) --

        The list of port ranges for the connections from clients to the accelerator.

        • (dict) --

          A complex type for a range of ports for a listener.

          • FromPort (integer) --

            The first port in the range of ports, inclusive.

          • ToPort (integer) --

            The last port in the range of ports, inclusive.

      • Protocol (string) --

        The protocol for the connections from clients to the accelerator.

      • ClientAffinity (string) --

        Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint.

        AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE , Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.

        If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value.

        The default value is NONE .

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InvalidPortRangeException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.LimitExceededException
delete_accelerator(**kwargs)

Delete an accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.

Warning

When you create an accelerator, by default, Global Accelerator provides you with a set of two static IP addresses. Alternatively, you can bring your own IP address ranges to Global Accelerator and assign IP addresses from those ranges.

The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control in the AWS Global Accelerator Developer Guide .

See also: AWS API Documentation

Request Syntax

response = client.delete_accelerator(
    AcceleratorArn='string'
)
Parameters
AcceleratorArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of an accelerator.

Returns
None

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.AcceleratorNotDisabledException
  • GlobalAccelerator.Client.exceptions.AssociatedListenerFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
delete_custom_routing_accelerator(**kwargs)

Delete a custom routing accelerator. Before you can delete an accelerator, you must disable it and remove all dependent resources (listeners and endpoint groups). To disable the accelerator, update the accelerator to set Enabled to false.

Warning

When you create a custom routing accelerator, by default, Global Accelerator provides you with a set of two static IP addresses.

The IP addresses are assigned to your accelerator for as long as it exists, even if you disable the accelerator and it no longer accepts or routes traffic. However, when you delete an accelerator, you lose the static IP addresses that are assigned to the accelerator, so you can no longer route traffic by using them. As a best practice, ensure that you have permissions in place to avoid inadvertently deleting accelerators. You can use IAM policies with Global Accelerator to limit the users who have permissions to delete an accelerator. For more information, see Authentication and Access Control in the AWS Global Accelerator Developer Guide .

See also: AWS API Documentation

Request Syntax

response = client.delete_custom_routing_accelerator(
    AcceleratorArn='string'
)
Parameters
AcceleratorArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the custom routing accelerator to delete.

Returns
None

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.AcceleratorNotDisabledException
  • GlobalAccelerator.Client.exceptions.AssociatedListenerFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
delete_custom_routing_endpoint_group(**kwargs)

Delete an endpoint group from a listener for a custom routing accelerator.

See also: AWS API Documentation

Request Syntax

response = client.delete_custom_routing_endpoint_group(
    EndpointGroupArn='string'
)
Parameters
EndpointGroupArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the endpoint group to delete.

Returns
None

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.EndpointGroupNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
delete_custom_routing_listener(**kwargs)

Delete a listener for a custom routing accelerator.

See also: AWS API Documentation

Request Syntax

response = client.delete_custom_routing_listener(
    ListenerArn='string'
)
Parameters
ListenerArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the listener to delete.

Returns
None

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.ListenerNotFoundException
  • GlobalAccelerator.Client.exceptions.AssociatedEndpointGroupFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
delete_endpoint_group(**kwargs)

Delete an endpoint group from a listener.

See also: AWS API Documentation

Request Syntax

response = client.delete_endpoint_group(
    EndpointGroupArn='string'
)
Parameters
EndpointGroupArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the endpoint group to delete.

Returns
None

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.EndpointGroupNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
delete_listener(**kwargs)

Delete a listener from an accelerator.

See also: AWS API Documentation

Request Syntax

response = client.delete_listener(
    ListenerArn='string'
)
Parameters
ListenerArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the listener.

Returns
None

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.ListenerNotFoundException
  • GlobalAccelerator.Client.exceptions.AssociatedEndpointGroupFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
deny_custom_routing_traffic(**kwargs)

Specify the Amazon EC2 instance (destination) IP addresses and ports for a VPC subnet endpoint that cannot receive traffic for a custom routing accelerator. You can deny traffic to all destinations in the VPC endpoint, or deny traffic to a specified list of destination IP addresses and ports. Note that you cannot specify IP addresses or ports outside of the range that you configured for the endpoint group.

After you make changes, you can verify that the updates are complete by checking the status of your accelerator: the status changes from IN_PROGRESS to DEPLOYED.

See also: AWS API Documentation

Request Syntax

response = client.deny_custom_routing_traffic(
    EndpointGroupArn='string',
    EndpointId='string',
    DestinationAddresses=[
        'string',
    ],
    DestinationPorts=[
        123,
    ],
    DenyAllTrafficToEndpoint=True|False
)
Parameters
  • EndpointGroupArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the endpoint group.

  • EndpointId (string) --

    [REQUIRED]

    An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.

  • DestinationAddresses (list) --

    A list of specific Amazon EC2 instance IP addresses (destination addresses) in a subnet that you want to prevent from receiving traffic. The IP addresses must be a subset of the IP addresses allowed for the VPC subnet associated with the endpoint group.

    • (string) --
  • DestinationPorts (list) --

    A list of specific Amazon EC2 instance ports (destination ports) in a subnet endpoint that you want to prevent from receiving traffic.

    • (integer) --
  • DenyAllTrafficToEndpoint (boolean) --

    Indicates whether all destination IP addresses and ports for a specified VPC subnet endpoint cannot receive traffic from a custom routing accelerator. The value is TRUE or FALSE.

    When set to TRUE, no destinations in the custom routing VPC subnet can receive traffic. Note that you cannot specify destination IP addresses and ports when the value is set to TRUE.

    When set to FALSE (or not specified), you must specify a list of destination IP addresses that cannot receive traffic. A list of ports is optional. If you don't specify a list of ports, the ports that can accept traffic is the same as the ports configured for the endpoint group.

    The default value is FALSE.

Returns

None

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
deprovision_byoip_cidr(**kwargs)

Releases the specified address range that you provisioned to use with your AWS resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool.

Before you can release an address range, you must stop advertising it by using WithdrawByoipCidr and you must not have any accelerators that are using static IP addresses allocated from its address range.

For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide .

See also: AWS API Documentation

Request Syntax

response = client.deprovision_byoip_cidr(
    Cidr='string'
)
Parameters
Cidr (string) --

[REQUIRED]

The address range, in CIDR notation. The prefix must be the same prefix that you specified when you provisioned the address range.

Return type
dict
Returns
Response Syntax
{
    'ByoipCidr': {
        'Cidr': 'string',
        'State': 'PENDING_PROVISIONING'|'READY'|'PENDING_ADVERTISING'|'ADVERTISING'|'PENDING_WITHDRAWING'|'PENDING_DEPROVISIONING'|'DEPROVISIONED'|'FAILED_PROVISION'|'FAILED_ADVERTISING'|'FAILED_WITHDRAW'|'FAILED_DEPROVISION',
        'Events': [
            {
                'Message': 'string',
                'Timestamp': datetime(2015, 1, 1)
            },
        ]
    }
}

Response Structure

  • (dict) --
    • ByoipCidr (dict) --

      Information about the address range.

      • Cidr (string) --

        The address range, in CIDR notation.

      • State (string) --

        The state of the address pool.

      • Events (list) --

        A history of status changes for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

        • (dict) --

          A complex type that contains a Message and a Timestamp value for changes that you make in the status an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

          • Message (string) --

            A string that contains an Event message describing changes that you make in the status of an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

          • Timestamp (datetime) --

            A timestamp when you make a status change for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

Exceptions

  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
  • GlobalAccelerator.Client.exceptions.ByoipCidrNotFoundException
  • GlobalAccelerator.Client.exceptions.IncorrectCidrStateException
describe_accelerator(**kwargs)

Describe an accelerator.

See also: AWS API Documentation

Request Syntax

response = client.describe_accelerator(
    AcceleratorArn='string'
)
Parameters
AcceleratorArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the accelerator to describe.

Return type
dict
Returns
Response Syntax
{
    'Accelerator': {
        'AcceleratorArn': 'string',
        'Name': 'string',
        'IpAddressType': 'IPV4',
        'Enabled': True|False,
        'IpSets': [
            {
                'IpFamily': 'string',
                'IpAddresses': [
                    'string',
                ]
            },
        ],
        'DnsName': 'string',
        'Status': 'DEPLOYED'|'IN_PROGRESS',
        'CreatedTime': datetime(2015, 1, 1),
        'LastModifiedTime': datetime(2015, 1, 1)
    }
}

Response Structure

  • (dict) --
    • Accelerator (dict) --

      The description of the accelerator.

      • AcceleratorArn (string) --

        The Amazon Resource Name (ARN) of the accelerator.

      • Name (string) --

        The name of the accelerator. The name must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.

      • IpAddressType (string) --

        The value for the address type must be IPv4.

      • Enabled (boolean) --

        Indicates whether the accelerator is enabled. The value is true or false. The default value is true.

        If the value is set to true, the accelerator cannot be deleted. If set to false, accelerator can be deleted.

      • IpSets (list) --

        The static IP addresses that Global Accelerator associates with the accelerator.

        • (dict) --

          A complex type for the set of IP addresses for an accelerator.

          • IpFamily (string) --

            The types of IP addresses included in this IP set.

          • IpAddresses (list) --

            The array of IP addresses in the IP address set. An IP address set can have a maximum of two IP addresses.

            • (string) --
      • DnsName (string) --

        The Domain Name System (DNS) name that Global Accelerator creates that points to your accelerator's static IP addresses.

        The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com.

        For more information about the default DNS name, see Support for DNS Addressing in Global Accelerator in the AWS Global Accelerator Developer Guide .

      • Status (string) --

        Describes the deployment status of the accelerator.

      • CreatedTime (datetime) --

        The date and time that the accelerator was created.

      • LastModifiedTime (datetime) --

        The date and time that the accelerator was last modified.

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
describe_accelerator_attributes(**kwargs)

Describe the attributes of an accelerator.

See also: AWS API Documentation

Request Syntax

response = client.describe_accelerator_attributes(
    AcceleratorArn='string'
)
Parameters
AcceleratorArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the accelerator with the attributes that you want to describe.

Return type
dict
Returns
Response Syntax
{
    'AcceleratorAttributes': {
        'FlowLogsEnabled': True|False,
        'FlowLogsS3Bucket': 'string',
        'FlowLogsS3Prefix': 'string'
    }
}

Response Structure

  • (dict) --
    • AcceleratorAttributes (dict) --

      The attributes of the accelerator.

      • FlowLogsEnabled (boolean) --

        Indicates whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified.

        For more information, see Flow Logs in the AWS Global Accelerator Developer Guide .

      • FlowLogsS3Bucket (string) --

        The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true . The bucket must exist and have a bucket policy that grants AWS Global Accelerator permission to write to the bucket.

      • FlowLogsS3Prefix (string) --

        The prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true .

        If you don’t specify a prefix, the flow logs are stored in the root of the bucket. If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following:

        s3-bucket_name//AWSLogs/aws_account_id

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
describe_custom_routing_accelerator(**kwargs)

Describe a custom routing accelerator.

See also: AWS API Documentation

Request Syntax

response = client.describe_custom_routing_accelerator(
    AcceleratorArn='string'
)
Parameters
AcceleratorArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the accelerator to describe.

Return type
dict
Returns
Response Syntax
{
    'Accelerator': {
        'AcceleratorArn': 'string',
        'Name': 'string',
        'IpAddressType': 'IPV4',
        'Enabled': True|False,
        'IpSets': [
            {
                'IpFamily': 'string',
                'IpAddresses': [
                    'string',
                ]
            },
        ],
        'DnsName': 'string',
        'Status': 'DEPLOYED'|'IN_PROGRESS',
        'CreatedTime': datetime(2015, 1, 1),
        'LastModifiedTime': datetime(2015, 1, 1)
    }
}

Response Structure

  • (dict) --
    • Accelerator (dict) --

      The description of the custom routing accelerator.

      • AcceleratorArn (string) --

        The Amazon Resource Name (ARN) of the custom routing accelerator.

      • Name (string) --

        The name of the accelerator. The name must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.

      • IpAddressType (string) --

        The value for the address type must be IPv4.

      • Enabled (boolean) --

        Indicates whether the accelerator is enabled. The value is true or false. The default value is true.

        If the value is set to true, the accelerator cannot be deleted. If set to false, accelerator can be deleted.

      • IpSets (list) --

        The static IP addresses that Global Accelerator associates with the accelerator.

        • (dict) --

          A complex type for the set of IP addresses for an accelerator.

          • IpFamily (string) --

            The types of IP addresses included in this IP set.

          • IpAddresses (list) --

            The array of IP addresses in the IP address set. An IP address set can have a maximum of two IP addresses.

            • (string) --
      • DnsName (string) --

        The Domain Name System (DNS) name that Global Accelerator creates that points to your accelerator's static IP addresses.

        The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com.

        For more information about the default DNS name, see Support for DNS Addressing in Global Accelerator in the AWS Global Accelerator Developer Guide .

      • Status (string) --

        Describes the deployment status of the accelerator.

      • CreatedTime (datetime) --

        The date and time that the accelerator was created.

      • LastModifiedTime (datetime) --

        The date and time that the accelerator was last modified.

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
describe_custom_routing_accelerator_attributes(**kwargs)

Describe the attributes of a custom routing accelerator.

See also: AWS API Documentation

Request Syntax

response = client.describe_custom_routing_accelerator_attributes(
    AcceleratorArn='string'
)
Parameters
AcceleratorArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the custom routing accelerator to describe the attributes for.

Return type
dict
Returns
Response Syntax
{
    'AcceleratorAttributes': {
        'FlowLogsEnabled': True|False,
        'FlowLogsS3Bucket': 'string',
        'FlowLogsS3Prefix': 'string'
    }
}

Response Structure

  • (dict) --
    • AcceleratorAttributes (dict) --

      The attributes of the custom routing accelerator.

      • FlowLogsEnabled (boolean) --

        Indicates whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified.

        For more information, see Flow Logs in the AWS Global Accelerator Developer Guide .

      • FlowLogsS3Bucket (string) --

        The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true . The bucket must exist and have a bucket policy that grants AWS Global Accelerator permission to write to the bucket.

      • FlowLogsS3Prefix (string) --

        The prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true .

        If you don’t specify a prefix, the flow logs are stored in the root of the bucket. If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following:

        DOC-EXAMPLE-BUCKET//AWSLogs/aws_account_id

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
describe_custom_routing_endpoint_group(**kwargs)

Describe an endpoint group for a custom routing accelerator.

See also: AWS API Documentation

Request Syntax

response = client.describe_custom_routing_endpoint_group(
    EndpointGroupArn='string'
)
Parameters
EndpointGroupArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the endpoint group to describe.

Return type
dict
Returns
Response Syntax
{
    'EndpointGroup': {
        'EndpointGroupArn': 'string',
        'EndpointGroupRegion': 'string',
        'DestinationDescriptions': [
            {
                'FromPort': 123,
                'ToPort': 123,
                'Protocols': [
                    'TCP'|'UDP',
                ]
            },
        ],
        'EndpointDescriptions': [
            {
                'EndpointId': 'string'
            },
        ]
    }
}

Response Structure

  • (dict) --
    • EndpointGroup (dict) --

      The description of an endpoint group for a custom routing accelerator.

      • EndpointGroupArn (string) --

        The Amazon Resource Name (ARN) of the endpoint group.

      • EndpointGroupRegion (string) --

        The AWS Region where the endpoint group is located.

      • DestinationDescriptions (list) --

        For a custom routing accelerator, describes the port range and protocol for all endpoints (virtual private cloud subnets) in an endpoint group to accept client traffic on.

        • (dict) --

          For a custom routing accelerator, describes the port range and protocol for all endpoints (virtual private cloud subnets) in an endpoint group to accept client traffic on.

          • FromPort (integer) --

            The first port, inclusive, in the range of ports for the endpoint group that is associated with a custom routing accelerator.

          • ToPort (integer) --

            The last port, inclusive, in the range of ports for the endpoint group that is associated with a custom routing accelerator.

          • Protocols (list) --

            The protocol for the endpoint group that is associated with a custom routing accelerator. The protocol can be either TCP or UDP.

            • (string) --
      • EndpointDescriptions (list) --

        For a custom routing accelerator, describes the endpoints (virtual private cloud subnets) in an endpoint group to accept client traffic on.

        • (dict) --

          A complex type for an endpoint for a custom routing accelerator. Each endpoint group can include one or more endpoints, which are virtual private cloud (VPC) subnets.

          • EndpointId (string) --

            An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.EndpointGroupNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
describe_custom_routing_listener(**kwargs)

The description of a listener for a custom routing accelerator.

See also: AWS API Documentation

Request Syntax

response = client.describe_custom_routing_listener(
    ListenerArn='string'
)
Parameters
ListenerArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the listener to describe.

Return type
dict
Returns
Response Syntax
{
    'Listener': {
        'ListenerArn': 'string',
        'PortRanges': [
            {
                'FromPort': 123,
                'ToPort': 123
            },
        ]
    }
}

Response Structure

  • (dict) --
    • Listener (dict) --

      The description of a listener for a custom routing accelerator.

      • ListenerArn (string) --

        The Amazon Resource Name (ARN) of the listener.

      • PortRanges (list) --

        The port range to support for connections from clients to your accelerator.

        Separately, you set port ranges for endpoints. For more information, see About endpoints for custom routing accelerators .

        • (dict) --

          A complex type for a range of ports for a listener.

          • FromPort (integer) --

            The first port in the range of ports, inclusive.

          • ToPort (integer) --

            The last port in the range of ports, inclusive.

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.ListenerNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
describe_endpoint_group(**kwargs)

Describe an endpoint group.

See also: AWS API Documentation

Request Syntax

response = client.describe_endpoint_group(
    EndpointGroupArn='string'
)
Parameters
EndpointGroupArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the endpoint group to describe.

Return type
dict
Returns
Response Syntax
{
    'EndpointGroup': {
        'EndpointGroupArn': 'string',
        'EndpointGroupRegion': 'string',
        'EndpointDescriptions': [
            {
                'EndpointId': 'string',
                'Weight': 123,
                'HealthState': 'INITIAL'|'HEALTHY'|'UNHEALTHY',
                'HealthReason': 'string',
                'ClientIPPreservationEnabled': True|False
            },
        ],
        'TrafficDialPercentage': ...,
        'HealthCheckPort': 123,
        'HealthCheckProtocol': 'TCP'|'HTTP'|'HTTPS',
        'HealthCheckPath': 'string',
        'HealthCheckIntervalSeconds': 123,
        'ThresholdCount': 123,
        'PortOverrides': [
            {
                'ListenerPort': 123,
                'EndpointPort': 123
            },
        ]
    }
}

Response Structure

  • (dict) --
    • EndpointGroup (dict) --

      The description of an endpoint group.

      • EndpointGroupArn (string) --

        The Amazon Resource Name (ARN) of the endpoint group.

      • EndpointGroupRegion (string) --

        The AWS Region where the endpoint group is located.

      • EndpointDescriptions (list) --

        The list of endpoint objects.

        • (dict) --

          A complex type for an endpoint. Each endpoint group can include one or more endpoints, such as load balancers.

          • EndpointId (string) --

            An ID for the endpoint. If the endpoint is a Network Load Balancer or Application Load Balancer, this is the Amazon Resource Name (ARN) of the resource. If the endpoint is an Elastic IP address, this is the Elastic IP address allocation ID. For Amazon EC2 instances, this is the EC2 instance ID.

            An Application Load Balancer can be either internal or internet-facing.

          • Weight (integer) --

            The weight associated with the endpoint. When you add weights to endpoints, you configure AWS Global Accelerator to route traffic based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20 is routed to the last endpoint. For more information, see Endpoint Weights in the AWS Global Accelerator Developer Guide .

          • HealthState (string) --

            The health status of the endpoint.

          • HealthReason (string) --

            Returns a null result.

          • ClientIPPreservationEnabled (boolean) --

            Indicates whether client IP address preservation is enabled for an Application Load Balancer endpoint. The value is true or false. The default value is true for new accelerators.

            If the value is set to true, the client's IP address is preserved in the X-Forwarded-For request header as traffic travels to applications on the Application Load Balancer endpoint fronted by the accelerator.

            For more information, see Viewing Client IP Addresses in AWS Global Accelerator in the AWS Global Accelerator Developer Guide .

      • TrafficDialPercentage (float) --

        The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.

        Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.

        The default value is 100.

      • HealthCheckPort (integer) --

        The port that Global Accelerator uses to perform health checks on endpoints that are part of this endpoint group.

        The default port is the port for the listener that this endpoint group is associated with. If the listener port is a list, Global Accelerator uses the first specified port in the list of ports.

      • HealthCheckProtocol (string) --

        The protocol that Global Accelerator uses to perform health checks on endpoints that are part of this endpoint group. The default value is TCP.

      • HealthCheckPath (string) --

        If the protocol is HTTP/S, then this value provides the ping path that Global Accelerator uses for the destination on the endpoints for health checks. The default is slash (/).

      • HealthCheckIntervalSeconds (integer) --

        The time—10 seconds or 30 seconds—between health checks for each endpoint. The default value is 30.

      • ThresholdCount (integer) --

        The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.

      • PortOverrides (list) --

        Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you to map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on.

        • (dict) --

          Override specific listener ports used to route traffic to endpoints that are part of an endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

          For more information, see Port overrides in the AWS Global Accelerator Developer Guide .

          • ListenerPort (integer) --

            The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.

          • EndpointPort (integer) --

            The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.EndpointGroupNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
describe_listener(**kwargs)

Describe a listener.

See also: AWS API Documentation

Request Syntax

response = client.describe_listener(
    ListenerArn='string'
)
Parameters
ListenerArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the listener to describe.

Return type
dict
Returns
Response Syntax
{
    'Listener': {
        'ListenerArn': 'string',
        'PortRanges': [
            {
                'FromPort': 123,
                'ToPort': 123
            },
        ],
        'Protocol': 'TCP'|'UDP',
        'ClientAffinity': 'NONE'|'SOURCE_IP'
    }
}

Response Structure

  • (dict) --
    • Listener (dict) --

      The description of a listener.

      • ListenerArn (string) --

        The Amazon Resource Name (ARN) of the listener.

      • PortRanges (list) --

        The list of port ranges for the connections from clients to the accelerator.

        • (dict) --

          A complex type for a range of ports for a listener.

          • FromPort (integer) --

            The first port in the range of ports, inclusive.

          • ToPort (integer) --

            The last port in the range of ports, inclusive.

      • Protocol (string) --

        The protocol for the connections from clients to the accelerator.

      • ClientAffinity (string) --

        Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint.

        AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE , Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.

        If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value.

        The default value is NONE .

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.ListenerNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
get_paginator(operation_name)

Create a paginator for an operation.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Raises OperationNotPageableError
Raised if the operation is not pageable. You can use the client.can_paginate method to check if an operation is pageable.
Return type
L{botocore.paginate.Paginator}
Returns
A paginator object.
get_waiter(waiter_name)

Returns an object that can wait for some condition.

Parameters
waiter_name (str) -- The name of the waiter to get. See the waiters section of the service docs for a list of available waiters.
Returns
The specified waiter object.
Return type
botocore.waiter.Waiter
list_accelerators(**kwargs)

List the accelerators for an AWS account.

See also: AWS API Documentation

Request Syntax

response = client.list_accelerators(
    MaxResults=123,
    NextToken='string'
)
Parameters
  • MaxResults (integer) -- The number of Global Accelerator objects that you want to return with this call. The default value is 10.
  • NextToken (string) -- The token for the next set of results. You receive this token from a previous call.
Return type

dict

Returns

Response Syntax

{
    'Accelerators': [
        {
            'AcceleratorArn': 'string',
            'Name': 'string',
            'IpAddressType': 'IPV4',
            'Enabled': True|False,
            'IpSets': [
                {
                    'IpFamily': 'string',
                    'IpAddresses': [
                        'string',
                    ]
                },
            ],
            'DnsName': 'string',
            'Status': 'DEPLOYED'|'IN_PROGRESS',
            'CreatedTime': datetime(2015, 1, 1),
            'LastModifiedTime': datetime(2015, 1, 1)
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • Accelerators (list) --

      The list of accelerators for a customer account.

      • (dict) --

        An accelerator is a complex type that includes one or more listeners that process inbound connections and then direct traffic to one or more endpoint groups, each of which includes endpoints, such as load balancers.

        • AcceleratorArn (string) --

          The Amazon Resource Name (ARN) of the accelerator.

        • Name (string) --

          The name of the accelerator. The name must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.

        • IpAddressType (string) --

          The value for the address type must be IPv4.

        • Enabled (boolean) --

          Indicates whether the accelerator is enabled. The value is true or false. The default value is true.

          If the value is set to true, the accelerator cannot be deleted. If set to false, accelerator can be deleted.

        • IpSets (list) --

          The static IP addresses that Global Accelerator associates with the accelerator.

          • (dict) --

            A complex type for the set of IP addresses for an accelerator.

            • IpFamily (string) --

              The types of IP addresses included in this IP set.

            • IpAddresses (list) --

              The array of IP addresses in the IP address set. An IP address set can have a maximum of two IP addresses.

              • (string) --
        • DnsName (string) --

          The Domain Name System (DNS) name that Global Accelerator creates that points to your accelerator's static IP addresses.

          The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com.

          For more information about the default DNS name, see Support for DNS Addressing in Global Accelerator in the AWS Global Accelerator Developer Guide .

        • Status (string) --

          Describes the deployment status of the accelerator.

        • CreatedTime (datetime) --

          The date and time that the accelerator was created.

        • LastModifiedTime (datetime) --

          The date and time that the accelerator was last modified.

    • NextToken (string) --

      The token for the next set of results. You receive this token from a previous call.

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.InvalidNextTokenException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
list_byoip_cidrs(**kwargs)

Lists the IP address ranges that were specified in calls to ProvisionByoipCidr , including the current state and a history of state changes.

See also: AWS API Documentation

Request Syntax

response = client.list_byoip_cidrs(
    MaxResults=123,
    NextToken='string'
)
Parameters
  • MaxResults (integer) -- The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
  • NextToken (string) -- The token for the next page of results.
Return type

dict

Returns

Response Syntax

{
    'ByoipCidrs': [
        {
            'Cidr': 'string',
            'State': 'PENDING_PROVISIONING'|'READY'|'PENDING_ADVERTISING'|'ADVERTISING'|'PENDING_WITHDRAWING'|'PENDING_DEPROVISIONING'|'DEPROVISIONED'|'FAILED_PROVISION'|'FAILED_ADVERTISING'|'FAILED_WITHDRAW'|'FAILED_DEPROVISION',
            'Events': [
                {
                    'Message': 'string',
                    'Timestamp': datetime(2015, 1, 1)
                },
            ]
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • ByoipCidrs (list) --

      Information about your address ranges.

      • (dict) --

        Information about an IP address range that is provisioned for use with your AWS resources through bring your own IP address (BYOIP).

        The following describes each BYOIP State that your IP address range can be in.

        • PENDING_PROVISIONING — You’ve submitted a request to provision an IP address range but it is not yet provisioned with AWS Global Accelerator.
        • READY — The address range is provisioned with AWS Global Accelerator and can be advertised.
        • PENDING_ADVERTISING — You’ve submitted a request for AWS Global Accelerator to advertise an address range but it is not yet being advertised.
        • ADVERTISING — The address range is being advertised by AWS Global Accelerator.
        • PENDING_WITHDRAWING — You’ve submitted a request to withdraw an address range from being advertised but it is still being advertised by AWS Global Accelerator.
        • PENDING_DEPROVISIONING — You’ve submitted a request to deprovision an address range from AWS Global Accelerator but it is still provisioned.
        • DEPROVISIONED — The address range is deprovisioned from AWS Global Accelerator.
        • FAILED_PROVISION — The request to provision the address range from AWS Global Accelerator was not successful. Please make sure that you provide all of the correct information, and try again. If the request fails a second time, contact AWS support.
        • FAILED_ADVERTISING — The request for AWS Global Accelerator to advertise the address range was not successful. Please make sure that you provide all of the correct information, and try again. If the request fails a second time, contact AWS support.
        • FAILED_WITHDRAW — The request to withdraw the address range from advertising by AWS Global Accelerator was not successful. Please make sure that you provide all of the correct information, and try again. If the request fails a second time, contact AWS support.
        • FAILED_DEPROVISION — The request to deprovision the address range from AWS Global Accelerator was not successful. Please make sure that you provide all of the correct information, and try again. If the request fails a second time, contact AWS support.
        • Cidr (string) --

          The address range, in CIDR notation.

        • State (string) --

          The state of the address pool.

        • Events (list) --

          A history of status changes for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

          • (dict) --

            A complex type that contains a Message and a Timestamp value for changes that you make in the status an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

            • Message (string) --

              A string that contains an Event message describing changes that you make in the status of an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

            • Timestamp (datetime) --

              A timestamp when you make a status change for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

    • NextToken (string) --

      The token for the next page of results.

Exceptions

  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
  • GlobalAccelerator.Client.exceptions.InvalidNextTokenException
list_custom_routing_accelerators(**kwargs)

List the custom routing accelerators for an AWS account.

See also: AWS API Documentation

Request Syntax

response = client.list_custom_routing_accelerators(
    MaxResults=123,
    NextToken='string'
)
Parameters
  • MaxResults (integer) -- The number of custom routing Global Accelerator objects that you want to return with this call. The default value is 10.
  • NextToken (string) -- The token for the next set of results. You receive this token from a previous call.
Return type

dict

Returns

Response Syntax

{
    'Accelerators': [
        {
            'AcceleratorArn': 'string',
            'Name': 'string',
            'IpAddressType': 'IPV4',
            'Enabled': True|False,
            'IpSets': [
                {
                    'IpFamily': 'string',
                    'IpAddresses': [
                        'string',
                    ]
                },
            ],
            'DnsName': 'string',
            'Status': 'DEPLOYED'|'IN_PROGRESS',
            'CreatedTime': datetime(2015, 1, 1),
            'LastModifiedTime': datetime(2015, 1, 1)
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • Accelerators (list) --

      The list of custom routing accelerators for a customer account.

      • (dict) --

        Attributes of a custom routing accelerator.

        • AcceleratorArn (string) --

          The Amazon Resource Name (ARN) of the custom routing accelerator.

        • Name (string) --

          The name of the accelerator. The name must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.

        • IpAddressType (string) --

          The value for the address type must be IPv4.

        • Enabled (boolean) --

          Indicates whether the accelerator is enabled. The value is true or false. The default value is true.

          If the value is set to true, the accelerator cannot be deleted. If set to false, accelerator can be deleted.

        • IpSets (list) --

          The static IP addresses that Global Accelerator associates with the accelerator.

          • (dict) --

            A complex type for the set of IP addresses for an accelerator.

            • IpFamily (string) --

              The types of IP addresses included in this IP set.

            • IpAddresses (list) --

              The array of IP addresses in the IP address set. An IP address set can have a maximum of two IP addresses.

              • (string) --
        • DnsName (string) --

          The Domain Name System (DNS) name that Global Accelerator creates that points to your accelerator's static IP addresses.

          The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com.

          For more information about the default DNS name, see Support for DNS Addressing in Global Accelerator in the AWS Global Accelerator Developer Guide .

        • Status (string) --

          Describes the deployment status of the accelerator.

        • CreatedTime (datetime) --

          The date and time that the accelerator was created.

        • LastModifiedTime (datetime) --

          The date and time that the accelerator was last modified.

    • NextToken (string) --

      The token for the next set of results. You receive this token from a previous call.

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.InvalidNextTokenException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
list_custom_routing_endpoint_groups(**kwargs)

List the endpoint groups that are associated with a listener for a custom routing accelerator.

See also: AWS API Documentation

Request Syntax

response = client.list_custom_routing_endpoint_groups(
    ListenerArn='string',
    MaxResults=123,
    NextToken='string'
)
Parameters
  • ListenerArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the listener to list endpoint groups for.

  • MaxResults (integer) -- The number of endpoint group objects that you want to return with this call. The default value is 10.
  • NextToken (string) -- The token for the next set of results. You receive this token from a previous call.
Return type

dict

Returns

Response Syntax

{
    'EndpointGroups': [
        {
            'EndpointGroupArn': 'string',
            'EndpointGroupRegion': 'string',
            'DestinationDescriptions': [
                {
                    'FromPort': 123,
                    'ToPort': 123,
                    'Protocols': [
                        'TCP'|'UDP',
                    ]
                },
            ],
            'EndpointDescriptions': [
                {
                    'EndpointId': 'string'
                },
            ]
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • EndpointGroups (list) --

      The list of the endpoint groups associated with a listener for a custom routing accelerator.

      • (dict) --

        A complex type for the endpoint group for a custom routing accelerator. An AWS Region can have only one endpoint group for a specific listener.

        • EndpointGroupArn (string) --

          The Amazon Resource Name (ARN) of the endpoint group.

        • EndpointGroupRegion (string) --

          The AWS Region where the endpoint group is located.

        • DestinationDescriptions (list) --

          For a custom routing accelerator, describes the port range and protocol for all endpoints (virtual private cloud subnets) in an endpoint group to accept client traffic on.

          • (dict) --

            For a custom routing accelerator, describes the port range and protocol for all endpoints (virtual private cloud subnets) in an endpoint group to accept client traffic on.

            • FromPort (integer) --

              The first port, inclusive, in the range of ports for the endpoint group that is associated with a custom routing accelerator.

            • ToPort (integer) --

              The last port, inclusive, in the range of ports for the endpoint group that is associated with a custom routing accelerator.

            • Protocols (list) --

              The protocol for the endpoint group that is associated with a custom routing accelerator. The protocol can be either TCP or UDP.

              • (string) --
        • EndpointDescriptions (list) --

          For a custom routing accelerator, describes the endpoints (virtual private cloud subnets) in an endpoint group to accept client traffic on.

          • (dict) --

            A complex type for an endpoint for a custom routing accelerator. Each endpoint group can include one or more endpoints, which are virtual private cloud (VPC) subnets.

            • EndpointId (string) --

              An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.

    • NextToken (string) --

      The token for the next set of results. You receive this token from a previous call.

Exceptions

  • GlobalAccelerator.Client.exceptions.ListenerNotFoundException
  • GlobalAccelerator.Client.exceptions.InvalidNextTokenException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
list_custom_routing_listeners(**kwargs)

List the listeners for a custom routing accelerator.

See also: AWS API Documentation

Request Syntax

response = client.list_custom_routing_listeners(
    AcceleratorArn='string',
    MaxResults=123,
    NextToken='string'
)
Parameters
  • AcceleratorArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the accelerator to list listeners for.

  • MaxResults (integer) -- The number of listener objects that you want to return with this call. The default value is 10.
  • NextToken (string) -- The token for the next set of results. You receive this token from a previous call.
Return type

dict

Returns

Response Syntax

{
    'Listeners': [
        {
            'ListenerArn': 'string',
            'PortRanges': [
                {
                    'FromPort': 123,
                    'ToPort': 123
                },
            ]
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • Listeners (list) --

      The list of listeners for a custom routing accelerator.

      • (dict) --

        A complex type for a listener for a custom routing accelerator.

        • ListenerArn (string) --

          The Amazon Resource Name (ARN) of the listener.

        • PortRanges (list) --

          The port range to support for connections from clients to your accelerator.

          Separately, you set port ranges for endpoints. For more information, see About endpoints for custom routing accelerators .

          • (dict) --

            A complex type for a range of ports for a listener.

            • FromPort (integer) --

              The first port in the range of ports, inclusive.

            • ToPort (integer) --

              The last port in the range of ports, inclusive.

    • NextToken (string) --

      The token for the next set of results. You receive this token from a previous call.

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InvalidNextTokenException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
list_custom_routing_port_mappings(**kwargs)

Provides a complete mapping from the public accelerator IP address and port to destination EC2 instance IP addresses and ports in the virtual public cloud (VPC) subnet endpoint for a custom routing accelerator. For each subnet endpoint that you add, Global Accelerator creates a new static port mapping for the accelerator. The port mappings don't change after Global Accelerator generates them, so you can retrieve and cache the full mapping on your servers.

If you remove a subnet from your accelerator, Global Accelerator removes (reclaims) the port mappings. If you add a subnet to your accelerator, Global Accelerator creates new port mappings (the existing ones don't change). If you add or remove EC2 instances in your subnet, the port mappings don't change, because the mappings are created when you add the subnet to Global Accelerator.

The mappings also include a flag for each destination denoting which destination IP addresses and ports are allowed or denied traffic.

See also: AWS API Documentation

Request Syntax

response = client.list_custom_routing_port_mappings(
    AcceleratorArn='string',
    EndpointGroupArn='string',
    MaxResults=123,
    NextToken='string'
)
Parameters
  • AcceleratorArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the accelerator to list the custom routing port mappings for.

  • EndpointGroupArn (string) -- The Amazon Resource Name (ARN) of the endpoint group to list the custom routing port mappings for.
  • MaxResults (integer) -- The number of destination port mappings that you want to return with this call. The default value is 10.
  • NextToken (string) -- The token for the next set of results. You receive this token from a previous call.
Return type

dict

Returns

Response Syntax

{
    'PortMappings': [
        {
            'AcceleratorPort': 123,
            'EndpointGroupArn': 'string',
            'EndpointId': 'string',
            'DestinationSocketAddress': {
                'IpAddress': 'string',
                'Port': 123
            },
            'Protocols': [
                'TCP'|'UDP',
            ],
            'DestinationTrafficState': 'ALLOW'|'DENY'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • PortMappings (list) --

      The port mappings for a custom routing accelerator.

      • (dict) --

        Returns the ports and associated IP addresses and ports of Amazon EC2 instances in your virtual private cloud (VPC) subnets. Custom routing is a port mapping protocol in AWS Global Accelerator that statically associates port ranges with VPC subnets, which allows Global Accelerator to route to specific instances and ports within one or more subnets.

        • AcceleratorPort (integer) --

          The accelerator port.

        • EndpointGroupArn (string) --

          The Amazon Resource Name (ARN) of the endpoint group.

        • EndpointId (string) --

          The IP address of the VPC subnet (the subnet ID).

        • DestinationSocketAddress (dict) --

          The EC2 instance IP address and port number in the virtual private cloud (VPC) subnet.

          • IpAddress (string) --

            The IP address for the socket address.

          • Port (integer) --

            The port for the socket address.

        • Protocols (list) --

          The protocols supported by the endpoint group.

          • (string) --
        • DestinationTrafficState (string) --

          Indicates whether or not a port mapping destination can receive traffic. The value is either ALLOW, if traffic is allowed to the destination, or DENY, if traffic is not allowed to the destination.

    • NextToken (string) --

      The token for the next set of results. You receive this token from a previous call.

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.InvalidNextTokenException
  • GlobalAccelerator.Client.exceptions.EndpointGroupNotFoundException
  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
list_custom_routing_port_mappings_by_destination(**kwargs)

List the port mappings for a specific EC2 instance (destination) in a VPC subnet endpoint. The response is the mappings for one destination IP address. This is useful when your subnet endpoint has mappings that span multiple custom routing accelerators in your account, or for scenarios where you only want to list the port mappings for a specific destination instance.

See also: AWS API Documentation

Request Syntax

response = client.list_custom_routing_port_mappings_by_destination(
    EndpointId='string',
    DestinationAddress='string',
    MaxResults=123,
    NextToken='string'
)
Parameters
  • EndpointId (string) --

    [REQUIRED]

    The ID for the virtual private cloud (VPC) subnet.

  • DestinationAddress (string) --

    [REQUIRED]

    The endpoint IP address in a virtual private cloud (VPC) subnet for which you want to receive back port mappings.

  • MaxResults (integer) -- The number of destination port mappings that you want to return with this call. The default value is 10.
  • NextToken (string) -- The token for the next set of results. You receive this token from a previous call.
Return type

dict

Returns

Response Syntax

{
    'DestinationPortMappings': [
        {
            'AcceleratorArn': 'string',
            'AcceleratorSocketAddresses': [
                {
                    'IpAddress': 'string',
                    'Port': 123
                },
            ],
            'EndpointGroupArn': 'string',
            'EndpointId': 'string',
            'EndpointGroupRegion': 'string',
            'DestinationSocketAddress': {
                'IpAddress': 'string',
                'Port': 123
            },
            'IpAddressType': 'IPV4',
            'DestinationTrafficState': 'ALLOW'|'DENY'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • DestinationPortMappings (list) --

      The port mappings for the endpoint IP address that you specified in the request.

      • (dict) --

        The port mappings for a specified endpoint IP address (destination).

        • AcceleratorArn (string) --

          The Amazon Resource Name (ARN) of the custom routing accelerator that you have port mappings for.

        • AcceleratorSocketAddresses (list) --

          The IP address/port combinations (sockets) that map to a given destination socket address.

          • (dict) --

            An IP address/port combination.

            • IpAddress (string) --

              The IP address for the socket address.

            • Port (integer) --

              The port for the socket address.

        • EndpointGroupArn (string) --

          The Amazon Resource Name (ARN) of the endpoint group.

        • EndpointId (string) --

          The ID for the virtual private cloud (VPC) subnet.

        • EndpointGroupRegion (string) --

          The AWS Region for the endpoint group.

        • DestinationSocketAddress (dict) --

          The endpoint IP address/port combination for traffic received on the accelerator socket address.

          • IpAddress (string) --

            The IP address for the socket address.

          • Port (integer) --

            The port for the socket address.

        • IpAddressType (string) --

          The IP address type, which must be IPv4.

        • DestinationTrafficState (string) --

          Indicates whether or not a port mapping destination can receive traffic. The value is either ALLOW, if traffic is allowed to the destination, or DENY, if traffic is not allowed to the destination.

    • NextToken (string) --

      The token for the next set of results. You receive this token from a previous call.

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.InvalidNextTokenException
  • GlobalAccelerator.Client.exceptions.EndpointNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
list_endpoint_groups(**kwargs)

List the endpoint groups that are associated with a listener.

See also: AWS API Documentation

Request Syntax

response = client.list_endpoint_groups(
    ListenerArn='string',
    MaxResults=123,
    NextToken='string'
)
Parameters
  • ListenerArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the listener.

  • MaxResults (integer) -- The number of endpoint group objects that you want to return with this call. The default value is 10.
  • NextToken (string) -- The token for the next set of results. You receive this token from a previous call.
Return type

dict

Returns

Response Syntax

{
    'EndpointGroups': [
        {
            'EndpointGroupArn': 'string',
            'EndpointGroupRegion': 'string',
            'EndpointDescriptions': [
                {
                    'EndpointId': 'string',
                    'Weight': 123,
                    'HealthState': 'INITIAL'|'HEALTHY'|'UNHEALTHY',
                    'HealthReason': 'string',
                    'ClientIPPreservationEnabled': True|False
                },
            ],
            'TrafficDialPercentage': ...,
            'HealthCheckPort': 123,
            'HealthCheckProtocol': 'TCP'|'HTTP'|'HTTPS',
            'HealthCheckPath': 'string',
            'HealthCheckIntervalSeconds': 123,
            'ThresholdCount': 123,
            'PortOverrides': [
                {
                    'ListenerPort': 123,
                    'EndpointPort': 123
                },
            ]
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • EndpointGroups (list) --

      The list of the endpoint groups associated with a listener.

      • (dict) --

        A complex type for the endpoint group. An AWS Region can have only one endpoint group for a specific listener.

        • EndpointGroupArn (string) --

          The Amazon Resource Name (ARN) of the endpoint group.

        • EndpointGroupRegion (string) --

          The AWS Region where the endpoint group is located.

        • EndpointDescriptions (list) --

          The list of endpoint objects.

          • (dict) --

            A complex type for an endpoint. Each endpoint group can include one or more endpoints, such as load balancers.

            • EndpointId (string) --

              An ID for the endpoint. If the endpoint is a Network Load Balancer or Application Load Balancer, this is the Amazon Resource Name (ARN) of the resource. If the endpoint is an Elastic IP address, this is the Elastic IP address allocation ID. For Amazon EC2 instances, this is the EC2 instance ID.

              An Application Load Balancer can be either internal or internet-facing.

            • Weight (integer) --

              The weight associated with the endpoint. When you add weights to endpoints, you configure AWS Global Accelerator to route traffic based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20 is routed to the last endpoint. For more information, see Endpoint Weights in the AWS Global Accelerator Developer Guide .

            • HealthState (string) --

              The health status of the endpoint.

            • HealthReason (string) --

              Returns a null result.

            • ClientIPPreservationEnabled (boolean) --

              Indicates whether client IP address preservation is enabled for an Application Load Balancer endpoint. The value is true or false. The default value is true for new accelerators.

              If the value is set to true, the client's IP address is preserved in the X-Forwarded-For request header as traffic travels to applications on the Application Load Balancer endpoint fronted by the accelerator.

              For more information, see Viewing Client IP Addresses in AWS Global Accelerator in the AWS Global Accelerator Developer Guide .

        • TrafficDialPercentage (float) --

          The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.

          Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.

          The default value is 100.

        • HealthCheckPort (integer) --

          The port that Global Accelerator uses to perform health checks on endpoints that are part of this endpoint group.

          The default port is the port for the listener that this endpoint group is associated with. If the listener port is a list, Global Accelerator uses the first specified port in the list of ports.

        • HealthCheckProtocol (string) --

          The protocol that Global Accelerator uses to perform health checks on endpoints that are part of this endpoint group. The default value is TCP.

        • HealthCheckPath (string) --

          If the protocol is HTTP/S, then this value provides the ping path that Global Accelerator uses for the destination on the endpoints for health checks. The default is slash (/).

        • HealthCheckIntervalSeconds (integer) --

          The time—10 seconds or 30 seconds—between health checks for each endpoint. The default value is 30.

        • ThresholdCount (integer) --

          The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.

        • PortOverrides (list) --

          Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you to map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on.

          • (dict) --

            Override specific listener ports used to route traffic to endpoints that are part of an endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

            For more information, see Port overrides in the AWS Global Accelerator Developer Guide .

            • ListenerPort (integer) --

              The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.

            • EndpointPort (integer) --

              The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

    • NextToken (string) --

      The token for the next set of results. You receive this token from a previous call.

Exceptions

  • GlobalAccelerator.Client.exceptions.ListenerNotFoundException
  • GlobalAccelerator.Client.exceptions.InvalidNextTokenException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
list_listeners(**kwargs)

List the listeners for an accelerator.

See also: AWS API Documentation

Request Syntax

response = client.list_listeners(
    AcceleratorArn='string',
    MaxResults=123,
    NextToken='string'
)
Parameters
  • AcceleratorArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the accelerator for which you want to list listener objects.

  • MaxResults (integer) -- The number of listener objects that you want to return with this call. The default value is 10.
  • NextToken (string) -- The token for the next set of results. You receive this token from a previous call.
Return type

dict

Returns

Response Syntax

{
    'Listeners': [
        {
            'ListenerArn': 'string',
            'PortRanges': [
                {
                    'FromPort': 123,
                    'ToPort': 123
                },
            ],
            'Protocol': 'TCP'|'UDP',
            'ClientAffinity': 'NONE'|'SOURCE_IP'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • Listeners (list) --

      The list of listeners for an accelerator.

      • (dict) --

        A complex type for a listener.

        • ListenerArn (string) --

          The Amazon Resource Name (ARN) of the listener.

        • PortRanges (list) --

          The list of port ranges for the connections from clients to the accelerator.

          • (dict) --

            A complex type for a range of ports for a listener.

            • FromPort (integer) --

              The first port in the range of ports, inclusive.

            • ToPort (integer) --

              The last port in the range of ports, inclusive.

        • Protocol (string) --

          The protocol for the connections from clients to the accelerator.

        • ClientAffinity (string) --

          Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint.

          AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE , Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.

          If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value.

          The default value is NONE .

    • NextToken (string) --

      The token for the next set of results. You receive this token from a previous call.

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InvalidNextTokenException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
list_tags_for_resource(**kwargs)

List all tags for an accelerator.

For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide .

See also: AWS API Documentation

Request Syntax

response = client.list_tags_for_resource(
    ResourceArn='string'
)
Parameters
ResourceArn (string) --

[REQUIRED]

The Amazon Resource Name (ARN) of the accelerator to list tags for. An ARN uniquely identifies an accelerator.

Return type
dict
Returns
Response Syntax
{
    'Tags': [
        {
            'Key': 'string',
            'Value': 'string'
        },
    ]
}

Response Structure

  • (dict) --
    • Tags (list) --

      Root level tag for the Tags parameters.

      • (dict) --

        A complex type that contains a Tag key and Tag value.

        • Key (string) --

          A string that contains a Tag key.

        • Value (string) --

          A string that contains a Tag value.

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
provision_byoip_cidr(**kwargs)

Provisions an IP address range to use with your AWS resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised using AdvertiseByoipCidr .

For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide .

See also: AWS API Documentation

Request Syntax

response = client.provision_byoip_cidr(
    Cidr='string',
    CidrAuthorizationContext={
        'Message': 'string',
        'Signature': 'string'
    }
)
Parameters
  • Cidr (string) --

    [REQUIRED]

    The public IPv4 address range, in CIDR notation. The most specific IP prefix that you can specify is /24. The address range cannot overlap with another address range that you've brought to this or another Region.

  • CidrAuthorizationContext (dict) --

    [REQUIRED]

    A signed document that proves that you are authorized to bring the specified IP address range to Amazon using BYOIP.

    • Message (string) -- [REQUIRED]

      The plain-text authorization message for the prefix and account.

    • Signature (string) -- [REQUIRED]

      The signed authorization message for the prefix and account.

Return type

dict

Returns

Response Syntax

{
    'ByoipCidr': {
        'Cidr': 'string',
        'State': 'PENDING_PROVISIONING'|'READY'|'PENDING_ADVERTISING'|'ADVERTISING'|'PENDING_WITHDRAWING'|'PENDING_DEPROVISIONING'|'DEPROVISIONED'|'FAILED_PROVISION'|'FAILED_ADVERTISING'|'FAILED_WITHDRAW'|'FAILED_DEPROVISION',
        'Events': [
            {
                'Message': 'string',
                'Timestamp': datetime(2015, 1, 1)
            },
        ]
    }
}

Response Structure

  • (dict) --

    • ByoipCidr (dict) --

      Information about the address range.

      • Cidr (string) --

        The address range, in CIDR notation.

      • State (string) --

        The state of the address pool.

      • Events (list) --

        A history of status changes for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

        • (dict) --

          A complex type that contains a Message and a Timestamp value for changes that you make in the status an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

          • Message (string) --

            A string that contains an Event message describing changes that you make in the status of an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

          • Timestamp (datetime) --

            A timestamp when you make a status change for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

Exceptions

  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.LimitExceededException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
  • GlobalAccelerator.Client.exceptions.IncorrectCidrStateException
remove_custom_routing_endpoints(**kwargs)

Remove endpoints from a custom routing accelerator.

See also: AWS API Documentation

Request Syntax

response = client.remove_custom_routing_endpoints(
    EndpointIds=[
        'string',
    ],
    EndpointGroupArn='string'
)
Parameters
  • EndpointIds (list) --

    [REQUIRED]

    The IDs for the endpoints. For custom routing accelerators, endpoint IDs are the virtual private cloud (VPC) subnet IDs.

    • (string) --
  • EndpointGroupArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the endpoint group to remove endpoints from.

Returns

None

Exceptions

  • GlobalAccelerator.Client.exceptions.EndpointGroupNotFoundException
  • GlobalAccelerator.Client.exceptions.EndpointNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
  • GlobalAccelerator.Client.exceptions.ConflictException
tag_resource(**kwargs)

Add tags to an accelerator resource.

For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide .

See also: AWS API Documentation

Request Syntax

response = client.tag_resource(
    ResourceArn='string',
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ]
)
Parameters
  • ResourceArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the Global Accelerator resource to add tags to. An ARN uniquely identifies a resource.

  • Tags (list) --

    [REQUIRED]

    The tags to add to a resource. A tag consists of a key and a value that you define.

    • (dict) --

      A complex type that contains a Tag key and Tag value.

      • Key (string) -- [REQUIRED]

        A string that contains a Tag key.

      • Value (string) -- [REQUIRED]

        A string that contains a Tag value.

Return type

dict

Returns

Response Syntax

{}

Response Structure

  • (dict) --

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
untag_resource(**kwargs)

Remove tags from a Global Accelerator resource. When you specify a tag key, the action removes both that key and its associated value. The operation succeeds even if you attempt to remove tags from an accelerator that was already removed.

For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide .

See also: AWS API Documentation

Request Syntax

response = client.untag_resource(
    ResourceArn='string',
    TagKeys=[
        'string',
    ]
)
Parameters
  • ResourceArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the Global Accelerator resource to remove tags from. An ARN uniquely identifies a resource.

  • TagKeys (list) --

    [REQUIRED]

    The tag key pairs that you want to remove from the specified resources.

    • (string) --
Return type

dict

Returns

Response Syntax

{}

Response Structure

  • (dict) --

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
update_accelerator(**kwargs)

Update an accelerator.

Warning

Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.

See also: AWS API Documentation

Request Syntax

response = client.update_accelerator(
    AcceleratorArn='string',
    Name='string',
    IpAddressType='IPV4',
    Enabled=True|False
)
Parameters
  • AcceleratorArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the accelerator to update.

  • Name (string) -- The name of the accelerator. The name can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.
  • IpAddressType (string) -- The IP address type, which must be IPv4.
  • Enabled (boolean) --

    Indicates whether an accelerator is enabled. The value is true or false. The default value is true.

    If the value is set to true, the accelerator cannot be deleted. If set to false, the accelerator can be deleted.

Return type

dict

Returns

Response Syntax

{
    'Accelerator': {
        'AcceleratorArn': 'string',
        'Name': 'string',
        'IpAddressType': 'IPV4',
        'Enabled': True|False,
        'IpSets': [
            {
                'IpFamily': 'string',
                'IpAddresses': [
                    'string',
                ]
            },
        ],
        'DnsName': 'string',
        'Status': 'DEPLOYED'|'IN_PROGRESS',
        'CreatedTime': datetime(2015, 1, 1),
        'LastModifiedTime': datetime(2015, 1, 1)
    }
}

Response Structure

  • (dict) --

    • Accelerator (dict) --

      Information about the updated accelerator.

      • AcceleratorArn (string) --

        The Amazon Resource Name (ARN) of the accelerator.

      • Name (string) --

        The name of the accelerator. The name must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.

      • IpAddressType (string) --

        The value for the address type must be IPv4.

      • Enabled (boolean) --

        Indicates whether the accelerator is enabled. The value is true or false. The default value is true.

        If the value is set to true, the accelerator cannot be deleted. If set to false, accelerator can be deleted.

      • IpSets (list) --

        The static IP addresses that Global Accelerator associates with the accelerator.

        • (dict) --

          A complex type for the set of IP addresses for an accelerator.

          • IpFamily (string) --

            The types of IP addresses included in this IP set.

          • IpAddresses (list) --

            The array of IP addresses in the IP address set. An IP address set can have a maximum of two IP addresses.

            • (string) --
      • DnsName (string) --

        The Domain Name System (DNS) name that Global Accelerator creates that points to your accelerator's static IP addresses.

        The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com.

        For more information about the default DNS name, see Support for DNS Addressing in Global Accelerator in the AWS Global Accelerator Developer Guide .

      • Status (string) --

        Describes the deployment status of the accelerator.

      • CreatedTime (datetime) --

        The date and time that the accelerator was created.

      • LastModifiedTime (datetime) --

        The date and time that the accelerator was last modified.

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
update_accelerator_attributes(**kwargs)

Update the attributes for an accelerator.

See also: AWS API Documentation

Request Syntax

response = client.update_accelerator_attributes(
    AcceleratorArn='string',
    FlowLogsEnabled=True|False,
    FlowLogsS3Bucket='string',
    FlowLogsS3Prefix='string'
)
Parameters
  • AcceleratorArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the accelerator that you want to update.

  • FlowLogsEnabled (boolean) --

    Update whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified.

    For more information, see Flow Logs in the AWS Global Accelerator Developer Guide .

  • FlowLogsS3Bucket (string) -- The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true . The bucket must exist and have a bucket policy that grants AWS Global Accelerator permission to write to the bucket.
  • FlowLogsS3Prefix (string) --

    Update the prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true .

    If you don’t specify a prefix, the flow logs are stored in the root of the bucket. If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following:

    s3-bucket_name//AWSLogs/aws_account_id

Return type

dict

Returns

Response Syntax

{
    'AcceleratorAttributes': {
        'FlowLogsEnabled': True|False,
        'FlowLogsS3Bucket': 'string',
        'FlowLogsS3Prefix': 'string'
    }
}

Response Structure

  • (dict) --

    • AcceleratorAttributes (dict) --

      Updated attributes for the accelerator.

      • FlowLogsEnabled (boolean) --

        Indicates whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified.

        For more information, see Flow Logs in the AWS Global Accelerator Developer Guide .

      • FlowLogsS3Bucket (string) --

        The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true . The bucket must exist and have a bucket policy that grants AWS Global Accelerator permission to write to the bucket.

      • FlowLogsS3Prefix (string) --

        The prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true .

        If you don’t specify a prefix, the flow logs are stored in the root of the bucket. If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following:

        s3-bucket_name//AWSLogs/aws_account_id

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
update_custom_routing_accelerator(**kwargs)

Update a custom routing accelerator.

See also: AWS API Documentation

Request Syntax

response = client.update_custom_routing_accelerator(
    AcceleratorArn='string',
    Name='string',
    IpAddressType='IPV4',
    Enabled=True|False
)
Parameters
  • AcceleratorArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the accelerator to update.

  • Name (string) -- The name of the accelerator. The name can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.
  • IpAddressType (string) -- The value for the address type must be IPv4.
  • Enabled (boolean) --

    Indicates whether an accelerator is enabled. The value is true or false. The default value is true.

    If the value is set to true, the accelerator cannot be deleted. If set to false, the accelerator can be deleted.

Return type

dict

Returns

Response Syntax

{
    'Accelerator': {
        'AcceleratorArn': 'string',
        'Name': 'string',
        'IpAddressType': 'IPV4',
        'Enabled': True|False,
        'IpSets': [
            {
                'IpFamily': 'string',
                'IpAddresses': [
                    'string',
                ]
            },
        ],
        'DnsName': 'string',
        'Status': 'DEPLOYED'|'IN_PROGRESS',
        'CreatedTime': datetime(2015, 1, 1),
        'LastModifiedTime': datetime(2015, 1, 1)
    }
}

Response Structure

  • (dict) --

    • Accelerator (dict) --

      Information about the updated custom routing accelerator.

      • AcceleratorArn (string) --

        The Amazon Resource Name (ARN) of the custom routing accelerator.

      • Name (string) --

        The name of the accelerator. The name must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.

      • IpAddressType (string) --

        The value for the address type must be IPv4.

      • Enabled (boolean) --

        Indicates whether the accelerator is enabled. The value is true or false. The default value is true.

        If the value is set to true, the accelerator cannot be deleted. If set to false, accelerator can be deleted.

      • IpSets (list) --

        The static IP addresses that Global Accelerator associates with the accelerator.

        • (dict) --

          A complex type for the set of IP addresses for an accelerator.

          • IpFamily (string) --

            The types of IP addresses included in this IP set.

          • IpAddresses (list) --

            The array of IP addresses in the IP address set. An IP address set can have a maximum of two IP addresses.

            • (string) --
      • DnsName (string) --

        The Domain Name System (DNS) name that Global Accelerator creates that points to your accelerator's static IP addresses.

        The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com.

        For more information about the default DNS name, see Support for DNS Addressing in Global Accelerator in the AWS Global Accelerator Developer Guide .

      • Status (string) --

        Describes the deployment status of the accelerator.

      • CreatedTime (datetime) --

        The date and time that the accelerator was created.

      • LastModifiedTime (datetime) --

        The date and time that the accelerator was last modified.

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
update_custom_routing_accelerator_attributes(**kwargs)

Update the attributes for a custom routing accelerator.

See also: AWS API Documentation

Request Syntax

response = client.update_custom_routing_accelerator_attributes(
    AcceleratorArn='string',
    FlowLogsEnabled=True|False,
    FlowLogsS3Bucket='string',
    FlowLogsS3Prefix='string'
)
Parameters
  • AcceleratorArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the custom routing accelerator to update attributes for.

  • FlowLogsEnabled (boolean) --

    Update whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified.

    For more information, see Flow Logs in the AWS Global Accelerator Developer Guide .

  • FlowLogsS3Bucket (string) -- The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true . The bucket must exist and have a bucket policy that grants AWS Global Accelerator permission to write to the bucket.
  • FlowLogsS3Prefix (string) --

    Update the prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true .

    If you don’t specify a prefix, the flow logs are stored in the root of the bucket. If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following:

    DOC-EXAMPLE-BUCKET//AWSLogs/aws_account_id

Return type

dict

Returns

Response Syntax

{
    'AcceleratorAttributes': {
        'FlowLogsEnabled': True|False,
        'FlowLogsS3Bucket': 'string',
        'FlowLogsS3Prefix': 'string'
    }
}

Response Structure

  • (dict) --

    • AcceleratorAttributes (dict) --

      Updated custom routing accelerator.

      • FlowLogsEnabled (boolean) --

        Indicates whether flow logs are enabled. The default value is false. If the value is true, FlowLogsS3Bucket and FlowLogsS3Prefix must be specified.

        For more information, see Flow Logs in the AWS Global Accelerator Developer Guide .

      • FlowLogsS3Bucket (string) --

        The name of the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true . The bucket must exist and have a bucket policy that grants AWS Global Accelerator permission to write to the bucket.

      • FlowLogsS3Prefix (string) --

        The prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if FlowLogsEnabled is true .

        If you don’t specify a prefix, the flow logs are stored in the root of the bucket. If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following:

        DOC-EXAMPLE-BUCKET//AWSLogs/aws_account_id

Exceptions

  • GlobalAccelerator.Client.exceptions.AcceleratorNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
update_custom_routing_listener(**kwargs)

Update a listener for a custom routing accelerator.

See also: AWS API Documentation

Request Syntax

response = client.update_custom_routing_listener(
    ListenerArn='string',
    PortRanges=[
        {
            'FromPort': 123,
            'ToPort': 123
        },
    ]
)
Parameters
  • ListenerArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the listener to update.

  • PortRanges (list) --

    [REQUIRED]

    The updated port range to support for connections from clients to your accelerator. If you remove ports that are currently being used by a subnet endpoint, the call fails.

    Separately, you set port ranges for endpoints. For more information, see About endpoints for custom routing accelerators .

    • (dict) --

      A complex type for a range of ports for a listener.

      • FromPort (integer) --

        The first port in the range of ports, inclusive.

      • ToPort (integer) --

        The last port in the range of ports, inclusive.

Return type

dict

Returns

Response Syntax

{
    'Listener': {
        'ListenerArn': 'string',
        'PortRanges': [
            {
                'FromPort': 123,
                'ToPort': 123
            },
        ]
    }
}

Response Structure

  • (dict) --

    • Listener (dict) --

      Information for the updated listener for a custom routing accelerator.

      • ListenerArn (string) --

        The Amazon Resource Name (ARN) of the listener.

      • PortRanges (list) --

        The port range to support for connections from clients to your accelerator.

        Separately, you set port ranges for endpoints. For more information, see About endpoints for custom routing accelerators .

        • (dict) --

          A complex type for a range of ports for a listener.

          • FromPort (integer) --

            The first port in the range of ports, inclusive.

          • ToPort (integer) --

            The last port in the range of ports, inclusive.

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.InvalidPortRangeException
  • GlobalAccelerator.Client.exceptions.ListenerNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.LimitExceededException
update_endpoint_group(**kwargs)

Update an endpoint group. A resource must be valid and active when you add it as an endpoint.

See also: AWS API Documentation

Request Syntax

response = client.update_endpoint_group(
    EndpointGroupArn='string',
    EndpointConfigurations=[
        {
            'EndpointId': 'string',
            'Weight': 123,
            'ClientIPPreservationEnabled': True|False
        },
    ],
    TrafficDialPercentage=...,
    HealthCheckPort=123,
    HealthCheckProtocol='TCP'|'HTTP'|'HTTPS',
    HealthCheckPath='string',
    HealthCheckIntervalSeconds=123,
    ThresholdCount=123,
    PortOverrides=[
        {
            'ListenerPort': 123,
            'EndpointPort': 123
        },
    ]
)
Parameters
  • EndpointGroupArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the endpoint group.

  • EndpointConfigurations (list) --

    The list of endpoint objects. A resource must be valid and active when you add it as an endpoint.

    • (dict) --

      A complex type for endpoints. A resource must be valid and active when you add it as an endpoint.

      • EndpointId (string) --

        An ID for the endpoint. If the endpoint is a Network Load Balancer or Application Load Balancer, this is the Amazon Resource Name (ARN) of the resource. If the endpoint is an Elastic IP address, this is the Elastic IP address allocation ID. For Amazon EC2 instances, this is the EC2 instance ID. A resource must be valid and active when you add it as an endpoint.

        An Application Load Balancer can be either internal or internet-facing.

      • Weight (integer) --

        The weight associated with the endpoint. When you add weights to endpoints, you configure AWS Global Accelerator to route traffic based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20 is routed to the last endpoint. For more information, see Endpoint Weights in the AWS Global Accelerator Developer Guide .

      • ClientIPPreservationEnabled (boolean) --

        Indicates whether client IP address preservation is enabled for an Application Load Balancer endpoint. The value is true or false. The default value is true for new accelerators.

        If the value is set to true, the client's IP address is preserved in the X-Forwarded-For request header as traffic travels to applications on the Application Load Balancer endpoint fronted by the accelerator.

        For more information, see Preserve Client IP Addresses in AWS Global Accelerator in the AWS Global Accelerator Developer Guide .

  • TrafficDialPercentage (float) --

    The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.

    Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.

    The default value is 100.

  • HealthCheckPort (integer) -- The port that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If the listener port is a list of ports, Global Accelerator uses the first port in the list.
  • HealthCheckProtocol (string) -- The protocol that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.
  • HealthCheckPath (string) -- If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The default value is slash (/).
  • HealthCheckIntervalSeconds (integer) -- The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.
  • ThresholdCount (integer) -- The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.
  • PortOverrides (list) --

    Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

    For more information, see Port overrides in the AWS Global Accelerator Developer Guide .

    • (dict) --

      Override specific listener ports used to route traffic to endpoints that are part of an endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

      For more information, see Port overrides in the AWS Global Accelerator Developer Guide .

      • ListenerPort (integer) --

        The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.

      • EndpointPort (integer) --

        The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

Return type

dict

Returns

Response Syntax

{
    'EndpointGroup': {
        'EndpointGroupArn': 'string',
        'EndpointGroupRegion': 'string',
        'EndpointDescriptions': [
            {
                'EndpointId': 'string',
                'Weight': 123,
                'HealthState': 'INITIAL'|'HEALTHY'|'UNHEALTHY',
                'HealthReason': 'string',
                'ClientIPPreservationEnabled': True|False
            },
        ],
        'TrafficDialPercentage': ...,
        'HealthCheckPort': 123,
        'HealthCheckProtocol': 'TCP'|'HTTP'|'HTTPS',
        'HealthCheckPath': 'string',
        'HealthCheckIntervalSeconds': 123,
        'ThresholdCount': 123,
        'PortOverrides': [
            {
                'ListenerPort': 123,
                'EndpointPort': 123
            },
        ]
    }
}

Response Structure

  • (dict) --

    • EndpointGroup (dict) --

      The information about the endpoint group that was updated.

      • EndpointGroupArn (string) --

        The Amazon Resource Name (ARN) of the endpoint group.

      • EndpointGroupRegion (string) --

        The AWS Region where the endpoint group is located.

      • EndpointDescriptions (list) --

        The list of endpoint objects.

        • (dict) --

          A complex type for an endpoint. Each endpoint group can include one or more endpoints, such as load balancers.

          • EndpointId (string) --

            An ID for the endpoint. If the endpoint is a Network Load Balancer or Application Load Balancer, this is the Amazon Resource Name (ARN) of the resource. If the endpoint is an Elastic IP address, this is the Elastic IP address allocation ID. For Amazon EC2 instances, this is the EC2 instance ID.

            An Application Load Balancer can be either internal or internet-facing.

          • Weight (integer) --

            The weight associated with the endpoint. When you add weights to endpoints, you configure AWS Global Accelerator to route traffic based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20 is routed to the last endpoint. For more information, see Endpoint Weights in the AWS Global Accelerator Developer Guide .

          • HealthState (string) --

            The health status of the endpoint.

          • HealthReason (string) --

            Returns a null result.

          • ClientIPPreservationEnabled (boolean) --

            Indicates whether client IP address preservation is enabled for an Application Load Balancer endpoint. The value is true or false. The default value is true for new accelerators.

            If the value is set to true, the client's IP address is preserved in the X-Forwarded-For request header as traffic travels to applications on the Application Load Balancer endpoint fronted by the accelerator.

            For more information, see Viewing Client IP Addresses in AWS Global Accelerator in the AWS Global Accelerator Developer Guide .

      • TrafficDialPercentage (float) --

        The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.

        Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.

        The default value is 100.

      • HealthCheckPort (integer) --

        The port that Global Accelerator uses to perform health checks on endpoints that are part of this endpoint group.

        The default port is the port for the listener that this endpoint group is associated with. If the listener port is a list, Global Accelerator uses the first specified port in the list of ports.

      • HealthCheckProtocol (string) --

        The protocol that Global Accelerator uses to perform health checks on endpoints that are part of this endpoint group. The default value is TCP.

      • HealthCheckPath (string) --

        If the protocol is HTTP/S, then this value provides the ping path that Global Accelerator uses for the destination on the endpoints for health checks. The default is slash (/).

      • HealthCheckIntervalSeconds (integer) --

        The time—10 seconds or 30 seconds—between health checks for each endpoint. The default value is 30.

      • ThresholdCount (integer) --

        The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.

      • PortOverrides (list) --

        Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you to map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on.

        • (dict) --

          Override specific listener ports used to route traffic to endpoints that are part of an endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

          For more information, see Port overrides in the AWS Global Accelerator Developer Guide .

          • ListenerPort (integer) --

            The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.

          • EndpointPort (integer) --

            The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.EndpointGroupNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.LimitExceededException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
update_listener(**kwargs)

Update a listener.

See also: AWS API Documentation

Request Syntax

response = client.update_listener(
    ListenerArn='string',
    PortRanges=[
        {
            'FromPort': 123,
            'ToPort': 123
        },
    ],
    Protocol='TCP'|'UDP',
    ClientAffinity='NONE'|'SOURCE_IP'
)
Parameters
  • ListenerArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the listener to update.

  • PortRanges (list) --

    The updated list of port ranges for the connections from clients to the accelerator.

    • (dict) --

      A complex type for a range of ports for a listener.

      • FromPort (integer) --

        The first port in the range of ports, inclusive.

      • ToPort (integer) --

        The last port in the range of ports, inclusive.

  • Protocol (string) -- The updated protocol for the connections from clients to the accelerator.
  • ClientAffinity (string) --

    Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint.

    AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE , Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.

    If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value.

    The default value is NONE .

Return type

dict

Returns

Response Syntax

{
    'Listener': {
        'ListenerArn': 'string',
        'PortRanges': [
            {
                'FromPort': 123,
                'ToPort': 123
            },
        ],
        'Protocol': 'TCP'|'UDP',
        'ClientAffinity': 'NONE'|'SOURCE_IP'
    }
}

Response Structure

  • (dict) --

    • Listener (dict) --

      Information for the updated listener.

      • ListenerArn (string) --

        The Amazon Resource Name (ARN) of the listener.

      • PortRanges (list) --

        The list of port ranges for the connections from clients to the accelerator.

        • (dict) --

          A complex type for a range of ports for a listener.

          • FromPort (integer) --

            The first port in the range of ports, inclusive.

          • ToPort (integer) --

            The last port in the range of ports, inclusive.

      • Protocol (string) --

        The protocol for the connections from clients to the accelerator.

      • ClientAffinity (string) --

        Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint.

        AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE , Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.

        If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value.

        The default value is NONE .

Exceptions

  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.InvalidPortRangeException
  • GlobalAccelerator.Client.exceptions.ListenerNotFoundException
  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.LimitExceededException
withdraw_byoip_cidr(**kwargs)

Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time.

It can take a few minutes before traffic to the specified addresses stops routing to AWS because of propagation delays.

For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide .

See also: AWS API Documentation

Request Syntax

response = client.withdraw_byoip_cidr(
    Cidr='string'
)
Parameters
Cidr (string) --

[REQUIRED]

The address range, in CIDR notation.

Return type
dict
Returns
Response Syntax
{
    'ByoipCidr': {
        'Cidr': 'string',
        'State': 'PENDING_PROVISIONING'|'READY'|'PENDING_ADVERTISING'|'ADVERTISING'|'PENDING_WITHDRAWING'|'PENDING_DEPROVISIONING'|'DEPROVISIONED'|'FAILED_PROVISION'|'FAILED_ADVERTISING'|'FAILED_WITHDRAW'|'FAILED_DEPROVISION',
        'Events': [
            {
                'Message': 'string',
                'Timestamp': datetime(2015, 1, 1)
            },
        ]
    }
}

Response Structure

  • (dict) --
    • ByoipCidr (dict) --

      Information about the address pool.

      • Cidr (string) --

        The address range, in CIDR notation.

      • State (string) --

        The state of the address pool.

      • Events (list) --

        A history of status changes for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

        • (dict) --

          A complex type that contains a Message and a Timestamp value for changes that you make in the status an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

          • Message (string) --

            A string that contains an Event message describing changes that you make in the status of an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

          • Timestamp (datetime) --

            A timestamp when you make a status change for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

Exceptions

  • GlobalAccelerator.Client.exceptions.InternalServiceErrorException
  • GlobalAccelerator.Client.exceptions.InvalidArgumentException
  • GlobalAccelerator.Client.exceptions.AccessDeniedException
  • GlobalAccelerator.Client.exceptions.ByoipCidrNotFoundException
  • GlobalAccelerator.Client.exceptions.IncorrectCidrStateException

Paginators

The available paginators are:

class GlobalAccelerator.Paginator.ListAccelerators
paginator = client.get_paginator('list_accelerators')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GlobalAccelerator.Client.list_accelerators().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
PaginationConfig (dict) --

A dictionary that provides parameters to control pagination.

  • MaxItems (integer) --

    The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

  • PageSize (integer) --

    The size of each page.

  • StartingToken (string) --

    A token to specify where to start paginating. This is the NextToken from a previous response.

Return type
dict
Returns
Response Syntax
{
    'Accelerators': [
        {
            'AcceleratorArn': 'string',
            'Name': 'string',
            'IpAddressType': 'IPV4',
            'Enabled': True|False,
            'IpSets': [
                {
                    'IpFamily': 'string',
                    'IpAddresses': [
                        'string',
                    ]
                },
            ],
            'DnsName': 'string',
            'Status': 'DEPLOYED'|'IN_PROGRESS',
            'CreatedTime': datetime(2015, 1, 1),
            'LastModifiedTime': datetime(2015, 1, 1)
        },
    ],

}

Response Structure

  • (dict) --
    • Accelerators (list) --

      The list of accelerators for a customer account.

      • (dict) --

        An accelerator is a complex type that includes one or more listeners that process inbound connections and then direct traffic to one or more endpoint groups, each of which includes endpoints, such as load balancers.

        • AcceleratorArn (string) --

          The Amazon Resource Name (ARN) of the accelerator.

        • Name (string) --

          The name of the accelerator. The name must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.

        • IpAddressType (string) --

          The value for the address type must be IPv4.

        • Enabled (boolean) --

          Indicates whether the accelerator is enabled. The value is true or false. The default value is true.

          If the value is set to true, the accelerator cannot be deleted. If set to false, accelerator can be deleted.

        • IpSets (list) --

          The static IP addresses that Global Accelerator associates with the accelerator.

          • (dict) --

            A complex type for the set of IP addresses for an accelerator.

            • IpFamily (string) --

              The types of IP addresses included in this IP set.

            • IpAddresses (list) --

              The array of IP addresses in the IP address set. An IP address set can have a maximum of two IP addresses.

              • (string) --
        • DnsName (string) --

          The Domain Name System (DNS) name that Global Accelerator creates that points to your accelerator's static IP addresses.

          The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com.

          For more information about the default DNS name, see Support for DNS Addressing in Global Accelerator in the AWS Global Accelerator Developer Guide .

        • Status (string) --

          Describes the deployment status of the accelerator.

        • CreatedTime (datetime) --

          The date and time that the accelerator was created.

        • LastModifiedTime (datetime) --

          The date and time that the accelerator was last modified.

class GlobalAccelerator.Paginator.ListByoipCidrs
paginator = client.get_paginator('list_byoip_cidrs')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GlobalAccelerator.Client.list_byoip_cidrs().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
PaginationConfig (dict) --

A dictionary that provides parameters to control pagination.

  • MaxItems (integer) --

    The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

  • PageSize (integer) --

    The size of each page.

  • StartingToken (string) --

    A token to specify where to start paginating. This is the NextToken from a previous response.

Return type
dict
Returns
Response Syntax
{
    'ByoipCidrs': [
        {
            'Cidr': 'string',
            'State': 'PENDING_PROVISIONING'|'READY'|'PENDING_ADVERTISING'|'ADVERTISING'|'PENDING_WITHDRAWING'|'PENDING_DEPROVISIONING'|'DEPROVISIONED'|'FAILED_PROVISION'|'FAILED_ADVERTISING'|'FAILED_WITHDRAW'|'FAILED_DEPROVISION',
            'Events': [
                {
                    'Message': 'string',
                    'Timestamp': datetime(2015, 1, 1)
                },
            ]
        },
    ],

}

Response Structure

  • (dict) --
    • ByoipCidrs (list) --

      Information about your address ranges.

      • (dict) --

        Information about an IP address range that is provisioned for use with your AWS resources through bring your own IP address (BYOIP).

        The following describes each BYOIP State that your IP address range can be in.

        • PENDING_PROVISIONING — You’ve submitted a request to provision an IP address range but it is not yet provisioned with AWS Global Accelerator.
        • READY — The address range is provisioned with AWS Global Accelerator and can be advertised.
        • PENDING_ADVERTISING — You’ve submitted a request for AWS Global Accelerator to advertise an address range but it is not yet being advertised.
        • ADVERTISING — The address range is being advertised by AWS Global Accelerator.
        • PENDING_WITHDRAWING — You’ve submitted a request to withdraw an address range from being advertised but it is still being advertised by AWS Global Accelerator.
        • PENDING_DEPROVISIONING — You’ve submitted a request to deprovision an address range from AWS Global Accelerator but it is still provisioned.
        • DEPROVISIONED — The address range is deprovisioned from AWS Global Accelerator.
        • FAILED_PROVISION — The request to provision the address range from AWS Global Accelerator was not successful. Please make sure that you provide all of the correct information, and try again. If the request fails a second time, contact AWS support.
        • FAILED_ADVERTISING — The request for AWS Global Accelerator to advertise the address range was not successful. Please make sure that you provide all of the correct information, and try again. If the request fails a second time, contact AWS support.
        • FAILED_WITHDRAW — The request to withdraw the address range from advertising by AWS Global Accelerator was not successful. Please make sure that you provide all of the correct information, and try again. If the request fails a second time, contact AWS support.
        • FAILED_DEPROVISION — The request to deprovision the address range from AWS Global Accelerator was not successful. Please make sure that you provide all of the correct information, and try again. If the request fails a second time, contact AWS support.
        • Cidr (string) --

          The address range, in CIDR notation.

        • State (string) --

          The state of the address pool.

        • Events (list) --

          A history of status changes for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

          • (dict) --

            A complex type that contains a Message and a Timestamp value for changes that you make in the status an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

            • Message (string) --

              A string that contains an Event message describing changes that you make in the status of an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

            • Timestamp (datetime) --

              A timestamp when you make a status change for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).

class GlobalAccelerator.Paginator.ListCustomRoutingAccelerators
paginator = client.get_paginator('list_custom_routing_accelerators')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GlobalAccelerator.Client.list_custom_routing_accelerators().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
PaginationConfig (dict) --

A dictionary that provides parameters to control pagination.

  • MaxItems (integer) --

    The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

  • PageSize (integer) --

    The size of each page.

  • StartingToken (string) --

    A token to specify where to start paginating. This is the NextToken from a previous response.

Return type
dict
Returns
Response Syntax
{
    'Accelerators': [
        {
            'AcceleratorArn': 'string',
            'Name': 'string',
            'IpAddressType': 'IPV4',
            'Enabled': True|False,
            'IpSets': [
                {
                    'IpFamily': 'string',
                    'IpAddresses': [
                        'string',
                    ]
                },
            ],
            'DnsName': 'string',
            'Status': 'DEPLOYED'|'IN_PROGRESS',
            'CreatedTime': datetime(2015, 1, 1),
            'LastModifiedTime': datetime(2015, 1, 1)
        },
    ],

}

Response Structure

  • (dict) --
    • Accelerators (list) --

      The list of custom routing accelerators for a customer account.

      • (dict) --

        Attributes of a custom routing accelerator.

        • AcceleratorArn (string) --

          The Amazon Resource Name (ARN) of the custom routing accelerator.

        • Name (string) --

          The name of the accelerator. The name must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.

        • IpAddressType (string) --

          The value for the address type must be IPv4.

        • Enabled (boolean) --

          Indicates whether the accelerator is enabled. The value is true or false. The default value is true.

          If the value is set to true, the accelerator cannot be deleted. If set to false, accelerator can be deleted.

        • IpSets (list) --

          The static IP addresses that Global Accelerator associates with the accelerator.

          • (dict) --

            A complex type for the set of IP addresses for an accelerator.

            • IpFamily (string) --

              The types of IP addresses included in this IP set.

            • IpAddresses (list) --

              The array of IP addresses in the IP address set. An IP address set can have a maximum of two IP addresses.

              • (string) --
        • DnsName (string) --

          The Domain Name System (DNS) name that Global Accelerator creates that points to your accelerator's static IP addresses.

          The naming convention for the DNS name is the following: A lowercase letter a, followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example: a1234567890abcdef.awsglobalaccelerator.com.

          For more information about the default DNS name, see Support for DNS Addressing in Global Accelerator in the AWS Global Accelerator Developer Guide .

        • Status (string) --

          Describes the deployment status of the accelerator.

        • CreatedTime (datetime) --

          The date and time that the accelerator was created.

        • LastModifiedTime (datetime) --

          The date and time that the accelerator was last modified.

class GlobalAccelerator.Paginator.ListCustomRoutingListeners
paginator = client.get_paginator('list_custom_routing_listeners')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GlobalAccelerator.Client.list_custom_routing_listeners().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    AcceleratorArn='string',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • AcceleratorArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the accelerator to list listeners for.

  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'Listeners': [
        {
            'ListenerArn': 'string',
            'PortRanges': [
                {
                    'FromPort': 123,
                    'ToPort': 123
                },
            ]
        },
    ],

}

Response Structure

  • (dict) --

    • Listeners (list) --

      The list of listeners for a custom routing accelerator.

      • (dict) --

        A complex type for a listener for a custom routing accelerator.

        • ListenerArn (string) --

          The Amazon Resource Name (ARN) of the listener.

        • PortRanges (list) --

          The port range to support for connections from clients to your accelerator.

          Separately, you set port ranges for endpoints. For more information, see About endpoints for custom routing accelerators .

          • (dict) --

            A complex type for a range of ports for a listener.

            • FromPort (integer) --

              The first port in the range of ports, inclusive.

            • ToPort (integer) --

              The last port in the range of ports, inclusive.

class GlobalAccelerator.Paginator.ListCustomRoutingPortMappings
paginator = client.get_paginator('list_custom_routing_port_mappings')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GlobalAccelerator.Client.list_custom_routing_port_mappings().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    AcceleratorArn='string',
    EndpointGroupArn='string',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • AcceleratorArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the accelerator to list the custom routing port mappings for.

  • EndpointGroupArn (string) -- The Amazon Resource Name (ARN) of the endpoint group to list the custom routing port mappings for.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'PortMappings': [
        {
            'AcceleratorPort': 123,
            'EndpointGroupArn': 'string',
            'EndpointId': 'string',
            'DestinationSocketAddress': {
                'IpAddress': 'string',
                'Port': 123
            },
            'Protocols': [
                'TCP'|'UDP',
            ],
            'DestinationTrafficState': 'ALLOW'|'DENY'
        },
    ],

}

Response Structure

  • (dict) --

    • PortMappings (list) --

      The port mappings for a custom routing accelerator.

      • (dict) --

        Returns the ports and associated IP addresses and ports of Amazon EC2 instances in your virtual private cloud (VPC) subnets. Custom routing is a port mapping protocol in AWS Global Accelerator that statically associates port ranges with VPC subnets, which allows Global Accelerator to route to specific instances and ports within one or more subnets.

        • AcceleratorPort (integer) --

          The accelerator port.

        • EndpointGroupArn (string) --

          The Amazon Resource Name (ARN) of the endpoint group.

        • EndpointId (string) --

          The IP address of the VPC subnet (the subnet ID).

        • DestinationSocketAddress (dict) --

          The EC2 instance IP address and port number in the virtual private cloud (VPC) subnet.

          • IpAddress (string) --

            The IP address for the socket address.

          • Port (integer) --

            The port for the socket address.

        • Protocols (list) --

          The protocols supported by the endpoint group.

          • (string) --
        • DestinationTrafficState (string) --

          Indicates whether or not a port mapping destination can receive traffic. The value is either ALLOW, if traffic is allowed to the destination, or DENY, if traffic is not allowed to the destination.

class GlobalAccelerator.Paginator.ListCustomRoutingPortMappingsByDestination
paginator = client.get_paginator('list_custom_routing_port_mappings_by_destination')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GlobalAccelerator.Client.list_custom_routing_port_mappings_by_destination().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    EndpointId='string',
    DestinationAddress='string',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • EndpointId (string) --

    [REQUIRED]

    The ID for the virtual private cloud (VPC) subnet.

  • DestinationAddress (string) --

    [REQUIRED]

    The endpoint IP address in a virtual private cloud (VPC) subnet for which you want to receive back port mappings.

  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'DestinationPortMappings': [
        {
            'AcceleratorArn': 'string',
            'AcceleratorSocketAddresses': [
                {
                    'IpAddress': 'string',
                    'Port': 123
                },
            ],
            'EndpointGroupArn': 'string',
            'EndpointId': 'string',
            'EndpointGroupRegion': 'string',
            'DestinationSocketAddress': {
                'IpAddress': 'string',
                'Port': 123
            },
            'IpAddressType': 'IPV4',
            'DestinationTrafficState': 'ALLOW'|'DENY'
        },
    ],

}

Response Structure

  • (dict) --

    • DestinationPortMappings (list) --

      The port mappings for the endpoint IP address that you specified in the request.

      • (dict) --

        The port mappings for a specified endpoint IP address (destination).

        • AcceleratorArn (string) --

          The Amazon Resource Name (ARN) of the custom routing accelerator that you have port mappings for.

        • AcceleratorSocketAddresses (list) --

          The IP address/port combinations (sockets) that map to a given destination socket address.

          • (dict) --

            An IP address/port combination.

            • IpAddress (string) --

              The IP address for the socket address.

            • Port (integer) --

              The port for the socket address.

        • EndpointGroupArn (string) --

          The Amazon Resource Name (ARN) of the endpoint group.

        • EndpointId (string) --

          The ID for the virtual private cloud (VPC) subnet.

        • EndpointGroupRegion (string) --

          The AWS Region for the endpoint group.

        • DestinationSocketAddress (dict) --

          The endpoint IP address/port combination for traffic received on the accelerator socket address.

          • IpAddress (string) --

            The IP address for the socket address.

          • Port (integer) --

            The port for the socket address.

        • IpAddressType (string) --

          The IP address type, which must be IPv4.

        • DestinationTrafficState (string) --

          Indicates whether or not a port mapping destination can receive traffic. The value is either ALLOW, if traffic is allowed to the destination, or DENY, if traffic is not allowed to the destination.

class GlobalAccelerator.Paginator.ListEndpointGroups
paginator = client.get_paginator('list_endpoint_groups')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GlobalAccelerator.Client.list_endpoint_groups().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    ListenerArn='string',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • ListenerArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the listener.

  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'EndpointGroups': [
        {
            'EndpointGroupArn': 'string',
            'EndpointGroupRegion': 'string',
            'EndpointDescriptions': [
                {
                    'EndpointId': 'string',
                    'Weight': 123,
                    'HealthState': 'INITIAL'|'HEALTHY'|'UNHEALTHY',
                    'HealthReason': 'string',
                    'ClientIPPreservationEnabled': True|False
                },
            ],
            'TrafficDialPercentage': ...,
            'HealthCheckPort': 123,
            'HealthCheckProtocol': 'TCP'|'HTTP'|'HTTPS',
            'HealthCheckPath': 'string',
            'HealthCheckIntervalSeconds': 123,
            'ThresholdCount': 123,
            'PortOverrides': [
                {
                    'ListenerPort': 123,
                    'EndpointPort': 123
                },
            ]
        },
    ],

}

Response Structure

  • (dict) --

    • EndpointGroups (list) --

      The list of the endpoint groups associated with a listener.

      • (dict) --

        A complex type for the endpoint group. An AWS Region can have only one endpoint group for a specific listener.

        • EndpointGroupArn (string) --

          The Amazon Resource Name (ARN) of the endpoint group.

        • EndpointGroupRegion (string) --

          The AWS Region where the endpoint group is located.

        • EndpointDescriptions (list) --

          The list of endpoint objects.

          • (dict) --

            A complex type for an endpoint. Each endpoint group can include one or more endpoints, such as load balancers.

            • EndpointId (string) --

              An ID for the endpoint. If the endpoint is a Network Load Balancer or Application Load Balancer, this is the Amazon Resource Name (ARN) of the resource. If the endpoint is an Elastic IP address, this is the Elastic IP address allocation ID. For Amazon EC2 instances, this is the EC2 instance ID.

              An Application Load Balancer can be either internal or internet-facing.

            • Weight (integer) --

              The weight associated with the endpoint. When you add weights to endpoints, you configure AWS Global Accelerator to route traffic based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second and third endpoints, and 6/20 is routed to the last endpoint. For more information, see Endpoint Weights in the AWS Global Accelerator Developer Guide .

            • HealthState (string) --

              The health status of the endpoint.

            • HealthReason (string) --

              Returns a null result.

            • ClientIPPreservationEnabled (boolean) --

              Indicates whether client IP address preservation is enabled for an Application Load Balancer endpoint. The value is true or false. The default value is true for new accelerators.

              If the value is set to true, the client's IP address is preserved in the X-Forwarded-For request header as traffic travels to applications on the Application Load Balancer endpoint fronted by the accelerator.

              For more information, see Viewing Client IP Addresses in AWS Global Accelerator in the AWS Global Accelerator Developer Guide .

        • TrafficDialPercentage (float) --

          The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.

          Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.

          The default value is 100.

        • HealthCheckPort (integer) --

          The port that Global Accelerator uses to perform health checks on endpoints that are part of this endpoint group.

          The default port is the port for the listener that this endpoint group is associated with. If the listener port is a list, Global Accelerator uses the first specified port in the list of ports.

        • HealthCheckProtocol (string) --

          The protocol that Global Accelerator uses to perform health checks on endpoints that are part of this endpoint group. The default value is TCP.

        • HealthCheckPath (string) --

          If the protocol is HTTP/S, then this value provides the ping path that Global Accelerator uses for the destination on the endpoints for health checks. The default is slash (/).

        • HealthCheckIntervalSeconds (integer) --

          The time—10 seconds or 30 seconds—between health checks for each endpoint. The default value is 30.

        • ThresholdCount (integer) --

          The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.

        • PortOverrides (list) --

          Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you to map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on.

          • (dict) --

            Override specific listener ports used to route traffic to endpoints that are part of an endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

            For more information, see Port overrides in the AWS Global Accelerator Developer Guide .

            • ListenerPort (integer) --

              The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.

            • EndpointPort (integer) --

              The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

class GlobalAccelerator.Paginator.ListListeners
paginator = client.get_paginator('list_listeners')
paginate(**kwargs)

Creates an iterator that will paginate through responses from GlobalAccelerator.Client.list_listeners().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    AcceleratorArn='string',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • AcceleratorArn (string) --

    [REQUIRED]

    The Amazon Resource Name (ARN) of the accelerator for which you want to list listener objects.

  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'Listeners': [
        {
            'ListenerArn': 'string',
            'PortRanges': [
                {
                    'FromPort': 123,
                    'ToPort': 123
                },
            ],
            'Protocol': 'TCP'|'UDP',
            'ClientAffinity': 'NONE'|'SOURCE_IP'
        },
    ],

}

Response Structure

  • (dict) --

    • Listeners (list) --

      The list of listeners for an accelerator.

      • (dict) --

        A complex type for a listener.

        • ListenerArn (string) --

          The Amazon Resource Name (ARN) of the listener.

        • PortRanges (list) --

          The list of port ranges for the connections from clients to the accelerator.

          • (dict) --

            A complex type for a range of ports for a listener.

            • FromPort (integer) --

              The first port in the range of ports, inclusive.

            • ToPort (integer) --

              The last port in the range of ports, inclusive.

        • Protocol (string) --

          The protocol for the connections from clients to the accelerator.

        • ClientAffinity (string) --

          Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint.

          AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE , Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.

          If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value.

          The default value is NONE .