Table of Contents
A low-level client representing AWS CloudFormation:
import boto3
client = boto3.client('cloudformation')
These are the available methods:
Check if an operation can be paginated.
Cancels an update on the specified stack. If the call completes successfully, the stack rolls back the update and reverts to the previous stack configuration.
Note
You can cancel only stacks that are in the UPDATE_IN_PROGRESS state.
See also: AWS API Documentation
Request Syntax
response = client.cancel_update_stack(
StackName='string',
ClientRequestToken='string'
)
[REQUIRED]
The name or the unique stack ID that is associated with the stack.
None
Examples
This example cancels an update of the specified stack.
response = client.cancel_update_stack(
StackName='MyStack',
)
print(response)
Expected Output:
{
'ResponseMetadata': {
'...': '...',
},
}
For a specified stack that is in the UPDATE_ROLLBACK_FAILED state, continues rolling it back to the UPDATE_ROLLBACK_COMPLETE state. Depending on the cause of the failure, you can manually fix the error and continue the rollback. By continuing the rollback, you can return your stack to a working state (the UPDATE_ROLLBACK_COMPLETE state), and then try to update the stack again.
A stack goes into the UPDATE_ROLLBACK_FAILED state when AWS CloudFormation cannot roll back all changes after a failed stack update. For example, you might have a stack that is rolling back to an old database instance that was deleted outside of AWS CloudFormation. Because AWS CloudFormation doesn't know the database was deleted, it assumes that the database instance still exists and attempts to roll back to it, causing the update rollback to fail.
See also: AWS API Documentation
Request Syntax
response = client.continue_update_rollback(
StackName='string',
RoleARN='string',
ResourcesToSkip=[
'string',
],
ClientRequestToken='string'
)
[REQUIRED]
The name or the unique ID of the stack that you want to continue rolling back.
Note
Don't specify the name of a nested stack (a stack that was created by using the AWS::CloudFormation::Stack resource). Instead, use this operation on the parent stack (the stack that contains the AWS::CloudFormation::Stack resource).
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes to roll back the stack. AWS CloudFormation uses the role's credentials to make calls on your behalf. AWS CloudFormation always uses this role for all future operations on the stack. As long as users have permission to operate on the stack, AWS CloudFormation uses this role even if the users don't have permission to pass it. Ensure that the role grants least privilege.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
A list of the logical IDs of the resources that AWS CloudFormation skips during the continue update rollback operation. You can specify only resources that are in the UPDATE_FAILED state because a rollback failed. You can't specify resources that are in the UPDATE_FAILED state for other reasons, for example, because an update was cancelled. To check why a resource update failed, use the DescribeStackResources action, and view the resource status reason.
Warning
Specify this property to skip rolling back resources that AWS CloudFormation can't successfully roll back. We recommend that you troubleshoot resources before skipping them. AWS CloudFormation sets the status of the specified resources to UPDATE_COMPLETE and continues to roll back the stack. After the rollback is complete, the state of the skipped resources will be inconsistent with the state of the resources in the stack template. Before performing another stack update, you must update the stack or resources to be consistent with each other. If you don't, subsequent stack updates might fail, and the stack will become unrecoverable.
Specify the minimum number of resources required to successfully roll back your stack. For example, a failed resource update might cause dependent resources to fail. In this case, it might not be necessary to skip the dependent resources.
To skip resources that are part of nested stacks, use the following format: NestedStackName.ResourceLogicalID . If you want to specify the logical ID of a stack resource (Type: AWS::CloudFormation::Stack ) in the ResourcesToSkip list, then its corresponding embedded stack must be in one of the following states: DELETE_IN_PROGRESS , DELETE_COMPLETE , or DELETE_FAILED .
Note
Don't confuse a child stack's name with its corresponding logical ID defined in the parent stack. For an example of a continue update rollback operation with nested stacks, see Using ResourcesToSkip to recover a nested stacks hierarchy .
dict
Response Syntax
{}
Response Structure
(dict) --
The output for a ContinueUpdateRollback action.
Creates a list of changes that will be applied to a stack so that you can review the changes before executing them. You can create a change set for a stack that doesn't exist or an existing stack. If you create a change set for a stack that doesn't exist, the change set shows all of the resources that AWS CloudFormation will create. If you create a change set for an existing stack, AWS CloudFormation compares the stack's information with the information that you submit in the change set and lists the differences. Use change sets to understand which resources AWS CloudFormation will create or change, and how it will change resources in an existing stack, before you create or update a stack.
To create a change set for a stack that doesn't exist, for the ChangeSetType parameter, specify CREATE . To create a change set for an existing stack, specify UPDATE for the ChangeSetType parameter. After the CreateChangeSet call successfully completes, AWS CloudFormation starts creating the change set. To check the status of the change set or to review it, use the DescribeChangeSet action.
When you are satisfied with the changes the change set will make, execute the change set by using the ExecuteChangeSet action. AWS CloudFormation doesn't make changes until you execute the change set.
See also: AWS API Documentation
Request Syntax
response = client.create_change_set(
StackName='string',
TemplateBody='string',
TemplateURL='string',
UsePreviousTemplate=True|False,
Parameters=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
Capabilities=[
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
ResourceTypes=[
'string',
],
RoleARN='string',
RollbackConfiguration={
'RollbackTriggers': [
{
'Arn': 'string',
'Type': 'string'
},
],
'MonitoringTimeInMinutes': 123
},
NotificationARNs=[
'string',
],
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
ChangeSetName='string',
ClientToken='string',
Description='string',
ChangeSetType='CREATE'|'UPDATE'
)
[REQUIRED]
The name or the unique ID of the stack for which you are creating a change set. AWS CloudFormation generates the change set by comparing this stack's information with the information that you submit, such as a modified template or different parameter input values.
A structure that contains the body of the revised template, with a minimum length of 1 byte and a maximum length of 51,200 bytes. AWS CloudFormation generates the change set by comparing this template with the template of the stack that you specified.
Conditional: You must specify only TemplateBody or TemplateURL .
The location of the file that contains the revised template. The URL must point to a template (max size: 460,800 bytes) that is located in an S3 bucket. AWS CloudFormation generates the change set by comparing this template with the stack that you specified.
Conditional: You must specify only TemplateBody or TemplateURL .
A list of Parameter structures that specify input parameters for the change set. For more information, see the Parameter data type.
The Parameter data type.
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
The input value associated with the parameter.
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
In some cases, you must explicity acknowledge that your stack template contains certain capabilities in order for AWS CloudFormation to create the stack.
If your stack template contains these resources, we recommend that you review all permissions associated with them and edit their permissions if necessary.
For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates .
Note
This capacity does not apply to creating change sets, and specifying it when creating change sets has no effect. Also, change sets do not currently support nested stacks. If you want to create a stack from a stack template that contains macros and nested stacks, you must create or update the stack directly from the template using the CreateStack or UpdateStack action, and specifying this capability.
For more information on macros, see Using AWS CloudFormation Macros to Perform Custom Processing on Templates .
The template resource types that you have permissions to work with if you execute this change set, such as AWS::EC2::Instance , AWS::EC2::* , or Custom::MyCustomInstance .
If the list of resource types doesn't include a resource type that you're updating, the stack update fails. By default, AWS CloudFormation grants permissions to all resource types. AWS Identity and Access Management (IAM) uses this parameter for condition keys in IAM policies for AWS CloudFormation. For more information, see Controlling Access with AWS Identity and Access Management in the AWS CloudFormation User Guide.
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes when executing the change set. AWS CloudFormation uses the role's credentials to make calls on your behalf. AWS CloudFormation uses this role for all future operations on the stack. As long as users have permission to operate on the stack, AWS CloudFormation uses this role even if the users don't have permission to pass it. Ensure that the role grants least privilege.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
The rollback triggers for AWS CloudFormation to monitor during stack creation and updating operations, and for the specified monitoring period afterwards.
The triggers to monitor during stack creation or update actions.
By default, AWS CloudFormation saves the rollback triggers specified for a stack and applies them to any subsequent update operations for the stack, unless you specify otherwise. If you do specify rollback triggers for this parameter, those triggers replace any list of triggers previously specified for the stack. This means:
If a specified trigger is missing, the entire stack operation fails and is rolled back.
A rollback trigger AWS CloudFormation monitors during creation and updating of stacks. If any of the alarms you specify goes to ALARM state during the stack operation or within the specified monitoring period afterwards, CloudFormation rolls back the entire stack operation.
The Amazon Resource Name (ARN) of the rollback trigger.
If a specified trigger is missing, the entire stack operation fails and is rolled back.
The resource type of the rollback trigger. Currently, AWS::CloudWatch::Alarm is the only supported resource type.
The amount of time, in minutes, during which CloudFormation should monitor all the rollback triggers after the stack creation or update operation deploys all necessary resources.
The default is 0 minutes.
If you specify a monitoring period but do not specify any rollback triggers, CloudFormation still waits the specified period of time before cleaning up old resources after update operations. You can use this monitoring period to perform any manual stack validation desired, and manually cancel the stack creation or update (using CancelUpdateStack , for example) as necessary.
If you specify 0 for this parameter, CloudFormation still monitors the specified rollback triggers during stack creation and update operations. Then, for update operations, it begins disposing of old resources immediately once the operation completes.
The Amazon Resource Names (ARNs) of Amazon Simple Notification Service (Amazon SNS) topics that AWS CloudFormation associates with the stack. To remove all associated notification topics, specify an empty list.
Key-value pairs to associate with this stack. AWS CloudFormation also propagates these tags to resources in the stack. You can specify a maximum of 50 tags.
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
[REQUIRED]
The name of the change set. The name must be unique among all change sets that are associated with the specified stack.
A change set name can contain only alphanumeric, case sensitive characters and hyphens. It must start with an alphabetic character and cannot exceed 128 characters.
The type of change set operation. To create a change set for a new stack, specify CREATE . To create a change set for an existing stack, specify UPDATE .
If you create a change set for a new stack, AWS Cloudformation creates a stack with a unique stack ID, but no template or resources. The stack will be in the ` REVIEW_IN_PROGRESS https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-describing-stacks.html#d0e11995`__ state until you execute the change set.
By default, AWS CloudFormation specifies UPDATE . You can't use the UPDATE type to create a change set for a new stack or the CREATE type to create a change set for an existing stack.
dict
Response Syntax
{
'Id': 'string',
'StackId': 'string'
}
Response Structure
(dict) --
The output for the CreateChangeSet action.
Id (string) --
The Amazon Resource Name (ARN) of the change set.
StackId (string) --
The unique ID of the stack.
Creates a stack as specified in the template. After the call completes successfully, the stack creation starts. You can check the status of the stack via the DescribeStacks API.
See also: AWS API Documentation
Request Syntax
response = client.create_stack(
StackName='string',
TemplateBody='string',
TemplateURL='string',
Parameters=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
DisableRollback=True|False,
RollbackConfiguration={
'RollbackTriggers': [
{
'Arn': 'string',
'Type': 'string'
},
],
'MonitoringTimeInMinutes': 123
},
TimeoutInMinutes=123,
NotificationARNs=[
'string',
],
Capabilities=[
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
ResourceTypes=[
'string',
],
RoleARN='string',
OnFailure='DO_NOTHING'|'ROLLBACK'|'DELETE',
StackPolicyBody='string',
StackPolicyURL='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
ClientRequestToken='string',
EnableTerminationProtection=True|False
)
[REQUIRED]
The name that is associated with the stack. The name must be unique in the region in which you are creating the stack.
Note
A stack name can contain only alphanumeric characters (case sensitive) and hyphens. It must start with an alphabetic character and cannot be longer than 128 characters.
Structure containing the template body with a minimum length of 1 byte and a maximum length of 51,200 bytes. For more information, go to Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify either the TemplateBody or the TemplateURL parameter, but not both.
Location of file containing the template body. The URL must point to a template (max size: 460,800 bytes) that is located in an Amazon S3 bucket. For more information, go to the Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify either the TemplateBody or the TemplateURL parameter, but not both.
A list of Parameter structures that specify input parameters for the stack. For more information, see the Parameter data type.
The Parameter data type.
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
The input value associated with the parameter.
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
Set to true to disable rollback of the stack if stack creation failed. You can specify either DisableRollback or OnFailure , but not both.
Default: false
The rollback triggers for AWS CloudFormation to monitor during stack creation and updating operations, and for the specified monitoring period afterwards.
The triggers to monitor during stack creation or update actions.
By default, AWS CloudFormation saves the rollback triggers specified for a stack and applies them to any subsequent update operations for the stack, unless you specify otherwise. If you do specify rollback triggers for this parameter, those triggers replace any list of triggers previously specified for the stack. This means:
If a specified trigger is missing, the entire stack operation fails and is rolled back.
A rollback trigger AWS CloudFormation monitors during creation and updating of stacks. If any of the alarms you specify goes to ALARM state during the stack operation or within the specified monitoring period afterwards, CloudFormation rolls back the entire stack operation.
The Amazon Resource Name (ARN) of the rollback trigger.
If a specified trigger is missing, the entire stack operation fails and is rolled back.
The resource type of the rollback trigger. Currently, AWS::CloudWatch::Alarm is the only supported resource type.
The amount of time, in minutes, during which CloudFormation should monitor all the rollback triggers after the stack creation or update operation deploys all necessary resources.
The default is 0 minutes.
If you specify a monitoring period but do not specify any rollback triggers, CloudFormation still waits the specified period of time before cleaning up old resources after update operations. You can use this monitoring period to perform any manual stack validation desired, and manually cancel the stack creation or update (using CancelUpdateStack , for example) as necessary.
If you specify 0 for this parameter, CloudFormation still monitors the specified rollback triggers during stack creation and update operations. Then, for update operations, it begins disposing of old resources immediately once the operation completes.
The Simple Notification Service (SNS) topic ARNs to publish stack related events. You can find your SNS topic ARNs using the SNS console or your Command Line Interface (CLI).
In some cases, you must explicity acknowledge that your stack template contains certain capabilities in order for AWS CloudFormation to create the stack.
If your stack template contains these resources, we recommend that you review all permissions associated with them and edit their permissions if necessary.
For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates .
Warning
You should only create stacks directly from a stack template that contains macros if you know what processing the macro performs. Each macro relies on an underlying Lambda service function for processing stack templates. Be aware that the Lambda function owner can update the function operation without AWS CloudFormation being notified.
For more information, see Using AWS CloudFormation Macros to Perform Custom Processing on Templates .
The template resource types that you have permissions to work with for this create stack action, such as AWS::EC2::Instance , AWS::EC2::* , or Custom::MyCustomInstance . Use the following syntax to describe template resource types: AWS::* (for all AWS resource), Custom::* (for all custom resources), Custom::*logical_ID* `` (for a specific custom resource), ``AWS::*service_name* ::* (for all resources of a particular AWS service), and ``AWS::service_name ::resource_logical_ID `` (for a specific AWS resource).
If the list of resource types doesn't include a resource that you're creating, the stack creation fails. By default, AWS CloudFormation grants permissions to all resource types. AWS Identity and Access Management (IAM) uses this parameter for AWS CloudFormation-specific condition keys in IAM policies. For more information, see Controlling Access with AWS Identity and Access Management .
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes to create the stack. AWS CloudFormation uses the role's credentials to make calls on your behalf. AWS CloudFormation always uses this role for all future operations on the stack. As long as users have permission to operate on the stack, AWS CloudFormation uses this role even if the users don't have permission to pass it. Ensure that the role grants least privilege.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
Determines what action will be taken if stack creation fails. This must be one of: DO_NOTHING, ROLLBACK, or DELETE. You can specify either OnFailure or DisableRollback , but not both.
Default: ROLLBACK
Key-value pairs to associate with this stack. AWS CloudFormation also propagates these tags to the resources created in the stack. A maximum number of 50 tags can be specified.
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
A unique identifier for this CreateStack request. Specify this token if you plan to retry requests so that AWS CloudFormation knows that you're not attempting to create a stack with the same name. You might retry CreateStack requests to ensure that AWS CloudFormation successfully received them.
All events triggered by a given stack operation are assigned the same client request token, which you can use to track operations. For example, if you execute a CreateStack operation with the token token1 , then all the StackEvents generated by that operation will have ClientRequestToken set as token1 .
In the console, stack operations display the client request token on the Events tab. Stack operations that are initiated from the console use the token format Console-StackOperation-ID , which helps you easily identify the stack operation . For example, if you create a stack using the console, each stack event would be assigned the same token in the following format: Console-CreateStack-7f59c3cf-00d2-40c7-b2ff-e75db0987002 .
Whether to enable termination protection on the specified stack. If a user attempts to delete a stack with termination protection enabled, the operation fails and the stack remains unchanged. For more information, see Protecting a Stack From Being Deleted in the AWS CloudFormation User Guide . Termination protection is disabled on stacks by default.
For nested stacks , termination protection is set on the root stack and cannot be changed directly on the nested stack.
dict
Response Syntax
{
'StackId': 'string'
}
Response Structure
(dict) --
The output for a CreateStack action.
StackId (string) --
Unique identifier of the stack.
Creates stack instances for the specified accounts, within the specified regions. A stack instance refers to a stack in a specific account and region. Accounts and Regions are required parameters—you must specify at least one account and one region.
See also: AWS API Documentation
Request Syntax
response = client.create_stack_instances(
StackSetName='string',
Accounts=[
'string',
],
Regions=[
'string',
],
ParameterOverrides=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
OperationPreferences={
'RegionOrder': [
'string',
],
'FailureToleranceCount': 123,
'FailureTolerancePercentage': 123,
'MaxConcurrentCount': 123,
'MaxConcurrentPercentage': 123
},
OperationId='string'
)
[REQUIRED]
The name or unique ID of the stack set that you want to create stack instances from.
[REQUIRED]
The names of one or more AWS accounts that you want to create stack instances in the specified region(s) for.
[REQUIRED]
The names of one or more regions where you want to create stack instances using the specified AWS account(s).
A list of stack set parameters whose values you want to override in the selected stack instances.
Any overridden parameter values will be applied to all stack instances in the specified accounts and regions. When specifying parameters and their values, be aware of how AWS CloudFormation sets parameter values during stack instance operations:
During stack set updates, any parameter values overridden for a stack instance are not updated, but retain their overridden value.
You can only override the parameter values that are specified in the stack set; to add or delete a parameter itself, use UpdateStackSet to update the stack set template.
The Parameter data type.
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
The input value associated with the parameter.
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
Preferences for how AWS CloudFormation performs this stack set operation.
The order of the regions in where you want to perform the stack operation.
The number of accounts, per region, for which this operation can fail before AWS CloudFormation stops the operation in that region. If the operation is stopped in a region, AWS CloudFormation doesn't attempt the operation in any subsequent regions.
Conditional: You must specify either FailureToleranceCount or FailureTolerancePercentage (but not both).
The percentage of accounts, per region, for which this stack operation can fail before AWS CloudFormation stops the operation in that region. If the operation is stopped in a region, AWS CloudFormation doesn't attempt the operation in any subsequent regions.
When calculating the number of accounts based on the specified percentage, AWS CloudFormation rounds down to the next whole number.
Conditional: You must specify either FailureToleranceCount or FailureTolerancePercentage , but not both.
The maximum number of accounts in which to perform this operation at one time. This is dependent on the value of FailureToleranceCount —MaxConcurrentCount is at most one more than the FailureToleranceCount .
Note that this setting lets you specify the maximum for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling.
Conditional: You must specify either MaxConcurrentCount or MaxConcurrentPercentage , but not both.
The maximum percentage of accounts in which to perform this operation at one time.
When calculating the number of accounts based on the specified percentage, AWS CloudFormation rounds down to the next whole number. This is true except in cases where rounding down would result is zero. In this case, CloudFormation sets the number as one instead.
Note that this setting lets you specify the maximum for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling.
Conditional: You must specify either MaxConcurrentCount or MaxConcurrentPercentage , but not both.
The unique identifier for this stack set operation.
The operation ID also functions as an idempotency token, to ensure that AWS CloudFormation performs the stack set operation only once, even if you retry the request multiple times. You might retry stack set operation requests to ensure that AWS CloudFormation successfully received them.
If you don't specify an operation ID, the SDK generates one automatically.
Repeating this stack set operation with a new operation ID retries all stack instances whose status is OUTDATED .
This field is autopopulated if not provided.
dict
Response Syntax
{
'OperationId': 'string'
}
Response Structure
(dict) --
OperationId (string) --
The unique identifier for this stack set operation.
Creates a stack set.
See also: AWS API Documentation
Request Syntax
response = client.create_stack_set(
StackSetName='string',
Description='string',
TemplateBody='string',
TemplateURL='string',
Parameters=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
Capabilities=[
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
AdministrationRoleARN='string',
ExecutionRoleName='string',
ClientRequestToken='string'
)
[REQUIRED]
The name to associate with the stack set. The name must be unique in the region where you create your stack set.
Note
A stack name can contain only alphanumeric characters (case-sensitive) and hyphens. It must start with an alphabetic character and can't be longer than 128 characters.
The structure that contains the template body, with a minimum length of 1 byte and a maximum length of 51,200 bytes. For more information, see Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify either the TemplateBody or the TemplateURL parameter, but not both.
The location of the file that contains the template body. The URL must point to a template (maximum size: 460,800 bytes) that's located in an Amazon S3 bucket. For more information, see Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify either the TemplateBody or the TemplateURL parameter, but not both.
The input parameters for the stack set template.
The Parameter data type.
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
The input value associated with the parameter.
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
In some cases, you must explicity acknowledge that your stack set template contains certain capabilities in order for AWS CloudFormation to create the stack set and related stack instances.
If your stack template contains these resources, we recommend that you review all permissions associated with them and edit their permissions if necessary.
For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates .
Note
Stack sets do not currently support macros in stack templates. (This includes the AWS::Include and AWS::Serverless transforms, which are macros hosted by AWS CloudFormation.) Even if you specify this capability, if you include a macro in your template the stack set operation will fail.
The key-value pairs to associate with this stack set and the stacks created from it. AWS CloudFormation also propagates these tags to supported resources that are created in the stacks. A maximum number of 50 tags can be specified.
If you specify tags as part of a CreateStackSet action, AWS CloudFormation checks to see if you have the required IAM permission to tag resources. If you don't, the entire CreateStackSet action fails with an access denied error, and the stack set is not created.
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
The Amazon Resource Number (ARN) of the IAM role to use to create this stack set.
Specify an IAM role only if you are using customized administrator roles to control which users or groups can manage specific stack sets within the same administrator account. For more information, see Prerequisites: Granting Permissions for Stack Set Operations in the AWS CloudFormation User Guide .
The name of the IAM execution role to use to create the stack set. If you do not specify an execution role, AWS CloudFormation uses the AWSCloudFormationStackSetExecutionRole role for the stack set operation.
Specify an IAM role only if you are using customized execution roles to control which stack resources users and groups can include in their stack sets.
A unique identifier for this CreateStackSet request. Specify this token if you plan to retry requests so that AWS CloudFormation knows that you're not attempting to create another stack set with the same name. You might retry CreateStackSet requests to ensure that AWS CloudFormation successfully received them.
If you don't specify an operation ID, the SDK generates one automatically.
This field is autopopulated if not provided.
dict
Response Syntax
{
'StackSetId': 'string'
}
Response Structure
(dict) --
StackSetId (string) --
The ID of the stack set that you're creating.
Deletes the specified change set. Deleting change sets ensures that no one executes the wrong change set.
If the call successfully completes, AWS CloudFormation successfully deleted the change set.
See also: AWS API Documentation
Request Syntax
response = client.delete_change_set(
ChangeSetName='string',
StackName='string'
)
[REQUIRED]
The name or Amazon Resource Name (ARN) of the change set that you want to delete.
dict
Response Syntax
{}
Response Structure
(dict) --
The output for the DeleteChangeSet action.
Deletes a specified stack. Once the call completes successfully, stack deletion starts. Deleted stacks do not show up in the DescribeStacks API if the deletion has been completed successfully.
See also: AWS API Documentation
Request Syntax
response = client.delete_stack(
StackName='string',
RetainResources=[
'string',
],
RoleARN='string',
ClientRequestToken='string'
)
[REQUIRED]
The name or the unique stack ID that is associated with the stack.
For stacks in the DELETE_FAILED state, a list of resource logical IDs that are associated with the resources you want to retain. During deletion, AWS CloudFormation deletes the stack but does not delete the retained resources.
Retaining resources is useful when you cannot delete a resource, such as a non-empty S3 bucket, but you want to delete the stack.
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes to delete the stack. AWS CloudFormation uses the role's credentials to make calls on your behalf.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
A unique identifier for this DeleteStack request. Specify this token if you plan to retry requests so that AWS CloudFormation knows that you're not attempting to delete a stack with the same name. You might retry DeleteStack requests to ensure that AWS CloudFormation successfully received them.
All events triggered by a given stack operation are assigned the same client request token, which you can use to track operations. For example, if you execute a CreateStack operation with the token token1 , then all the StackEvents generated by that operation will have ClientRequestToken set as token1 .
In the console, stack operations display the client request token on the Events tab. Stack operations that are initiated from the console use the token format Console-StackOperation-ID , which helps you easily identify the stack operation . For example, if you create a stack using the console, each stack event would be assigned the same token in the following format: Console-CreateStack-7f59c3cf-00d2-40c7-b2ff-e75db0987002 .
None
Deletes stack instances for the specified accounts, in the specified regions.
See also: AWS API Documentation
Request Syntax
response = client.delete_stack_instances(
StackSetName='string',
Accounts=[
'string',
],
Regions=[
'string',
],
OperationPreferences={
'RegionOrder': [
'string',
],
'FailureToleranceCount': 123,
'FailureTolerancePercentage': 123,
'MaxConcurrentCount': 123,
'MaxConcurrentPercentage': 123
},
RetainStacks=True|False,
OperationId='string'
)
[REQUIRED]
The name or unique ID of the stack set that you want to delete stack instances for.
[REQUIRED]
The names of the AWS accounts that you want to delete stack instances for.
[REQUIRED]
The regions where you want to delete stack set instances.
Preferences for how AWS CloudFormation performs this stack set operation.
The order of the regions in where you want to perform the stack operation.
The number of accounts, per region, for which this operation can fail before AWS CloudFormation stops the operation in that region. If the operation is stopped in a region, AWS CloudFormation doesn't attempt the operation in any subsequent regions.
Conditional: You must specify either FailureToleranceCount or FailureTolerancePercentage (but not both).
The percentage of accounts, per region, for which this stack operation can fail before AWS CloudFormation stops the operation in that region. If the operation is stopped in a region, AWS CloudFormation doesn't attempt the operation in any subsequent regions.
When calculating the number of accounts based on the specified percentage, AWS CloudFormation rounds down to the next whole number.
Conditional: You must specify either FailureToleranceCount or FailureTolerancePercentage , but not both.
The maximum number of accounts in which to perform this operation at one time. This is dependent on the value of FailureToleranceCount —MaxConcurrentCount is at most one more than the FailureToleranceCount .
Note that this setting lets you specify the maximum for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling.
Conditional: You must specify either MaxConcurrentCount or MaxConcurrentPercentage , but not both.
The maximum percentage of accounts in which to perform this operation at one time.
When calculating the number of accounts based on the specified percentage, AWS CloudFormation rounds down to the next whole number. This is true except in cases where rounding down would result is zero. In this case, CloudFormation sets the number as one instead.
Note that this setting lets you specify the maximum for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling.
Conditional: You must specify either MaxConcurrentCount or MaxConcurrentPercentage , but not both.
[REQUIRED]
Removes the stack instances from the specified stack set, but doesn't delete the stacks. You can't reassociate a retained stack or add an existing, saved stack to a new stack set.
For more information, see Stack set operation options .
The unique identifier for this stack set operation.
If you don't specify an operation ID, the SDK generates one automatically.
The operation ID also functions as an idempotency token, to ensure that AWS CloudFormation performs the stack set operation only once, even if you retry the request multiple times. You can retry stack set operation requests to ensure that AWS CloudFormation successfully received them.
Repeating this stack set operation with a new operation ID retries all stack instances whose status is OUTDATED .
This field is autopopulated if not provided.
dict
Response Syntax
{
'OperationId': 'string'
}
Response Structure
(dict) --
OperationId (string) --
The unique identifier for this stack set operation.
Deletes a stack set. Before you can delete a stack set, all of its member stack instances must be deleted. For more information about how to do this, see DeleteStackInstances .
See also: AWS API Documentation
Request Syntax
response = client.delete_stack_set(
StackSetName='string'
)
[REQUIRED]
The name or unique ID of the stack set that you're deleting. You can obtain this value by running ListStackSets .
{}
Response Structure
Retrieves your account's AWS CloudFormation limits, such as the maximum number of stacks that you can create in your account. For more information about account limits, see AWS CloudFormation Limits in the AWS CloudFormation User Guide .
See also: AWS API Documentation
Request Syntax
response = client.describe_account_limits(
NextToken='string'
)
{
'AccountLimits': [
{
'Name': 'string',
'Value': 123
},
],
'NextToken': 'string'
}
Response Structure
The output for the DescribeAccountLimits action.
An account limit structure that contain a list of AWS CloudFormation account limits and their values.
The AccountLimit data type. For more information about account limits, see AWS CloudFormation Limits in the AWS CloudFormation User Guide .
The name of the account limit.
The value that is associated with the account limit name.
If the output exceeds 1 MB in size, a string that identifies the next page of limits. If no additional page exists, this value is null.
Returns the inputs for the change set and a list of changes that AWS CloudFormation will make if you execute the change set. For more information, see Updating Stacks Using Change Sets in the AWS CloudFormation User Guide.
See also: AWS API Documentation
Request Syntax
response = client.describe_change_set(
ChangeSetName='string',
StackName='string',
NextToken='string'
)
[REQUIRED]
The name or Amazon Resource Name (ARN) of the change set that you want to describe.
dict
Response Syntax
{
'ChangeSetName': 'string',
'ChangeSetId': 'string',
'StackId': 'string',
'StackName': 'string',
'Description': 'string',
'Parameters': [
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
'CreationTime': datetime(2015, 1, 1),
'ExecutionStatus': 'UNAVAILABLE'|'AVAILABLE'|'EXECUTE_IN_PROGRESS'|'EXECUTE_COMPLETE'|'EXECUTE_FAILED'|'OBSOLETE',
'Status': 'CREATE_PENDING'|'CREATE_IN_PROGRESS'|'CREATE_COMPLETE'|'DELETE_COMPLETE'|'FAILED',
'StatusReason': 'string',
'NotificationARNs': [
'string',
],
'RollbackConfiguration': {
'RollbackTriggers': [
{
'Arn': 'string',
'Type': 'string'
},
],
'MonitoringTimeInMinutes': 123
},
'Capabilities': [
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'Changes': [
{
'Type': 'Resource',
'ResourceChange': {
'Action': 'Add'|'Modify'|'Remove',
'LogicalResourceId': 'string',
'PhysicalResourceId': 'string',
'ResourceType': 'string',
'Replacement': 'True'|'False'|'Conditional',
'Scope': [
'Properties'|'Metadata'|'CreationPolicy'|'UpdatePolicy'|'DeletionPolicy'|'Tags',
],
'Details': [
{
'Target': {
'Attribute': 'Properties'|'Metadata'|'CreationPolicy'|'UpdatePolicy'|'DeletionPolicy'|'Tags',
'Name': 'string',
'RequiresRecreation': 'Never'|'Conditionally'|'Always'
},
'Evaluation': 'Static'|'Dynamic',
'ChangeSource': 'ResourceReference'|'ParameterReference'|'ResourceAttribute'|'DirectModification'|'Automatic',
'CausingEntity': 'string'
},
]
}
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
The output for the DescribeChangeSet action.
ChangeSetName (string) --
The name of the change set.
ChangeSetId (string) --
The ARN of the change set.
StackId (string) --
The ARN of the stack that is associated with the change set.
StackName (string) --
The name of the stack that is associated with the change set.
Description (string) --
Information about the change set.
Parameters (list) --
A list of Parameter structures that describes the input parameters and their values used to create the change set. For more information, see the Parameter data type.
(dict) --
The Parameter data type.
ParameterKey (string) --
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
ParameterValue (string) --
The input value associated with the parameter.
UsePreviousValue (boolean) --
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
ResolvedValue (string) --
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
CreationTime (datetime) --
The start time when the change set was created, in UTC.
ExecutionStatus (string) --
If the change set execution status is AVAILABLE , you can execute the change set. If you can’t execute the change set, the status indicates why. For example, a change set might be in an UNAVAILABLE state because AWS CloudFormation is still creating it or in an OBSOLETE state because the stack was already updated.
Status (string) --
The current status of the change set, such as CREATE_IN_PROGRESS , CREATE_COMPLETE , or FAILED .
StatusReason (string) --
A description of the change set's status. For example, if your attempt to create a change set failed, AWS CloudFormation shows the error message.
NotificationARNs (list) --
The ARNs of the Amazon Simple Notification Service (Amazon SNS) topics that will be associated with the stack if you execute the change set.
RollbackConfiguration (dict) --
The rollback triggers for AWS CloudFormation to monitor during stack creation and updating operations, and for the specified monitoring period afterwards.
RollbackTriggers (list) --
The triggers to monitor during stack creation or update actions.
By default, AWS CloudFormation saves the rollback triggers specified for a stack and applies them to any subsequent update operations for the stack, unless you specify otherwise. If you do specify rollback triggers for this parameter, those triggers replace any list of triggers previously specified for the stack. This means:
If a specified trigger is missing, the entire stack operation fails and is rolled back.
(dict) --
A rollback trigger AWS CloudFormation monitors during creation and updating of stacks. If any of the alarms you specify goes to ALARM state during the stack operation or within the specified monitoring period afterwards, CloudFormation rolls back the entire stack operation.
Arn (string) --
The Amazon Resource Name (ARN) of the rollback trigger.
If a specified trigger is missing, the entire stack operation fails and is rolled back.
Type (string) --
The resource type of the rollback trigger. Currently, AWS::CloudWatch::Alarm is the only supported resource type.
MonitoringTimeInMinutes (integer) --
The amount of time, in minutes, during which CloudFormation should monitor all the rollback triggers after the stack creation or update operation deploys all necessary resources.
The default is 0 minutes.
If you specify a monitoring period but do not specify any rollback triggers, CloudFormation still waits the specified period of time before cleaning up old resources after update operations. You can use this monitoring period to perform any manual stack validation desired, and manually cancel the stack creation or update (using CancelUpdateStack , for example) as necessary.
If you specify 0 for this parameter, CloudFormation still monitors the specified rollback triggers during stack creation and update operations. Then, for update operations, it begins disposing of old resources immediately once the operation completes.
Capabilities (list) --
If you execute the change set, the list of capabilities that were explicitly acknowledged when the change set was created.
Tags (list) --
If you execute the change set, the tags that will be associated with the stack.
(dict) --
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Key (string) --
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Value (string) --
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
Changes (list) --
A list of Change structures that describes the resources AWS CloudFormation changes if you execute the change set.
(dict) --
The Change structure describes the changes AWS CloudFormation will perform if you execute the change set.
Type (string) --
The type of entity that AWS CloudFormation changes. Currently, the only entity type is Resource .
ResourceChange (dict) --
A ResourceChange structure that describes the resource and action that AWS CloudFormation will perform.
Action (string) --
The action that AWS CloudFormation takes on the resource, such as Add (adds a new resource), Modify (changes a resource), or Remove (deletes a resource).
LogicalResourceId (string) --
The resource's logical ID, which is defined in the stack's template.
PhysicalResourceId (string) --
The resource's physical ID (resource name). Resources that you are adding don't have physical IDs because they haven't been created.
ResourceType (string) --
The type of AWS CloudFormation resource, such as AWS::S3::Bucket .
Replacement (string) --
For the Modify action, indicates whether AWS CloudFormation will replace the resource by creating a new one and deleting the old one. This value depends on the value of the RequiresRecreation property in the ResourceTargetDefinition structure. For example, if the RequiresRecreation field is Always and the Evaluation field is Static , Replacement is True . If the RequiresRecreation field is Always and the Evaluation field is Dynamic , Replacement is Conditionally .
If you have multiple changes with different RequiresRecreation values, the Replacement value depends on the change with the most impact. A RequiresRecreation value of Always has the most impact, followed by Conditionally , and then Never .
Scope (list) --
For the Modify action, indicates which resource attribute is triggering this update, such as a change in the resource attribute's Metadata , Properties , or Tags .
Details (list) --
For the Modify action, a list of ResourceChangeDetail structures that describes the changes that AWS CloudFormation will make to the resource.
(dict) --
For a resource with Modify as the action, the ResourceChange structure describes the changes AWS CloudFormation will make to that resource.
Target (dict) --
A ResourceTargetDefinition structure that describes the field that AWS CloudFormation will change and whether the resource will be recreated.
Attribute (string) --
Indicates which resource attribute is triggering this update, such as a change in the resource attribute's Metadata , Properties , or Tags .
Name (string) --
If the Attribute value is Properties , the name of the property. For all other attributes, the value is null.
RequiresRecreation (string) --
If the Attribute value is Properties , indicates whether a change to this property causes the resource to be recreated. The value can be Never , Always , or Conditionally . To determine the conditions for a Conditionally recreation, see the update behavior for that property in the AWS CloudFormation User Guide.
Evaluation (string) --
Indicates whether AWS CloudFormation can determine the target value, and whether the target value will change before you execute a change set.
For Static evaluations, AWS CloudFormation can determine that the target value will change, and its value. For example, if you directly modify the InstanceType property of an EC2 instance, AWS CloudFormation knows that this property value will change, and its value, so this is a Static evaluation.
For Dynamic evaluations, cannot determine the target value because it depends on the result of an intrinsic function, such as a Ref or Fn::GetAtt intrinsic function, when the stack is updated. For example, if your template includes a reference to a resource that is conditionally recreated, the value of the reference (the physical ID of the resource) might change, depending on if the resource is recreated. If the resource is recreated, it will have a new physical ID, so all references to that resource will also be updated.
ChangeSource (string) --
The group to which the CausingEntity value belongs. There are five entity groups:
CausingEntity (string) --
The identity of the entity that triggered this change. This entity is a member of the group that is specified by the ChangeSource field. For example, if you modified the value of the KeyPairName parameter, the CausingEntity is the name of the parameter (KeyPairName ).
If the ChangeSource value is DirectModification , no value is given for CausingEntity .
NextToken (string) --
If the output exceeds 1 MB, a string that identifies the next page of changes. If there is no additional page, this value is null.
Returns information about a stack drift detection operation. A stack drift detection operation detects whether a stack's actual configuration differs, or has drifted , from it's expected configuration, as defined in the stack template and any values specified as template parameters. A stack is considered to have drifted if one or more of its resources have drifted. For more information on stack and resource drift, see Detecting Unregulated Configuration Changes to Stacks and Resources .
Use DetectStackDrift to initiate a stack drift detection operation. DetectStackDrift returns a StackDriftDetectionId you can use to monitor the progress of the operation using DescribeStackDriftDetectionStatus . Once the drift detection operation has completed, use DescribeStackResourceDrifts to return drift information about the stack and its resources.
See also: AWS API Documentation
Request Syntax
response = client.describe_stack_drift_detection_status(
StackDriftDetectionId='string'
)
[REQUIRED]
The ID of the drift detection results of this operation.
AWS CloudFormation generates new results, with a new drift detection ID, each time this operation is run. However, the number of drift results AWS CloudFormation retains for any given stack, and for how long, may vary.
{
'StackId': 'string',
'StackDriftDetectionId': 'string',
'StackDriftStatus': 'DRIFTED'|'IN_SYNC'|'UNKNOWN'|'NOT_CHECKED',
'DetectionStatus': 'DETECTION_IN_PROGRESS'|'DETECTION_FAILED'|'DETECTION_COMPLETE',
'DetectionStatusReason': 'string',
'DriftedStackResourceCount': 123,
'Timestamp': datetime(2015, 1, 1)
}
Response Structure
The ID of the stack.
The ID of the drift detection results of this operation.
AWS CloudFormation generates new results, with a new drift detection ID, each time this operation is run. However, the number of reports AWS CloudFormation retains for any given stack, and for how long, may vary.
Status of the stack's actual configuration compared to its expected configuration.
The status of the stack drift detection operation.
The reason the stack drift detection operation has its current status.
Total number of stack resources that have drifted. This is NULL until the drift detection operation reaches a status of DETECTION_COMPLETE . This value will be 0 for stacks whose drift status is IN_SYNC .
Time at which the stack drift detection operation was initiated.
Returns all stack related events for a specified stack in reverse chronological order. For more information about a stack's event history, go to Stacks in the AWS CloudFormation User Guide.
Note
You can list events for stacks that have failed to create or have been deleted by specifying the unique stack identifier (stack ID).
See also: AWS API Documentation
Request Syntax
response = client.describe_stack_events(
StackName='string',
NextToken='string'
)
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
dict
Response Syntax
{
'StackEvents': [
{
'StackId': 'string',
'EventId': 'string',
'StackName': 'string',
'LogicalResourceId': 'string',
'PhysicalResourceId': 'string',
'ResourceType': 'string',
'Timestamp': datetime(2015, 1, 1),
'ResourceStatus': 'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'DELETE_SKIPPED'|'UPDATE_IN_PROGRESS'|'UPDATE_FAILED'|'UPDATE_COMPLETE',
'ResourceStatusReason': 'string',
'ResourceProperties': 'string',
'ClientRequestToken': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
The output for a DescribeStackEvents action.
StackEvents (list) --
A list of StackEvents structures.
(dict) --
The StackEvent data type.
StackId (string) --
The unique ID name of the instance of the stack.
EventId (string) --
The unique ID of this event.
StackName (string) --
The name associated with a stack.
LogicalResourceId (string) --
The logical name of the resource specified in the template.
PhysicalResourceId (string) --
The name or unique identifier associated with the physical instance of the resource.
ResourceType (string) --
Type of resource. (For more information, go to AWS Resource Types Reference in the AWS CloudFormation User Guide.)
Timestamp (datetime) --
Time the status was updated.
ResourceStatus (string) --
Current status of the resource.
ResourceStatusReason (string) --
Success/failure message associated with the resource.
ResourceProperties (string) --
BLOB of the properties used to create the resource.
ClientRequestToken (string) --
The token passed to the operation that generated this event.
All events triggered by a given stack operation are assigned the same client request token, which you can use to track operations. For example, if you execute a CreateStack operation with the token token1 , then all the StackEvents generated by that operation will have ClientRequestToken set as token1 .
In the console, stack operations display the client request token on the Events tab. Stack operations that are initiated from the console use the token format Console-StackOperation-ID , which helps you easily identify the stack operation . For example, if you create a stack using the console, each stack event would be assigned the same token in the following format: Console-CreateStack-7f59c3cf-00d2-40c7-b2ff-e75db0987002 .
NextToken (string) --
If the output exceeds 1 MB in size, a string that identifies the next page of events. If no additional page exists, this value is null.
Returns the stack instance that's associated with the specified stack set, AWS account, and region.
For a list of stack instances that are associated with a specific stack set, use ListStackInstances .
See also: AWS API Documentation
Request Syntax
response = client.describe_stack_instance(
StackSetName='string',
StackInstanceAccount='string',
StackInstanceRegion='string'
)
[REQUIRED]
The name or the unique stack ID of the stack set that you want to get stack instance information for.
[REQUIRED]
The ID of an AWS account that's associated with this stack instance.
[REQUIRED]
The name of a region that's associated with this stack instance.
dict
Response Syntax
{
'StackInstance': {
'StackSetId': 'string',
'Region': 'string',
'Account': 'string',
'StackId': 'string',
'ParameterOverrides': [
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
'Status': 'CURRENT'|'OUTDATED'|'INOPERABLE',
'StatusReason': 'string'
}
}
Response Structure
(dict) --
StackInstance (dict) --
The stack instance that matches the specified request parameters.
StackSetId (string) --
The name or unique ID of the stack set that the stack instance is associated with.
Region (string) --
The name of the AWS region that the stack instance is associated with.
Account (string) --
The name of the AWS account that the stack instance is associated with.
StackId (string) --
The ID of the stack instance.
ParameterOverrides (list) --
A list of parameters from the stack set template whose values have been overridden in this stack instance.
(dict) --
The Parameter data type.
ParameterKey (string) --
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
ParameterValue (string) --
The input value associated with the parameter.
UsePreviousValue (boolean) --
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
ResolvedValue (string) --
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
Status (string) --
The status of the stack instance, in terms of its synchronization with its associated stack set.
StatusReason (string) --
The explanation for the specific status code that is assigned to this stack instance.
Returns a description of the specified resource in the specified stack.
For deleted stacks, DescribeStackResource returns resource information for up to 90 days after the stack has been deleted.
See also: AWS API Documentation
Request Syntax
response = client.describe_stack_resource(
StackName='string',
LogicalResourceId='string'
)
[REQUIRED]
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
[REQUIRED]
The logical name of the resource as specified in the template.
Default: There is no default value.
dict
Response Syntax
{
'StackResourceDetail': {
'StackName': 'string',
'StackId': 'string',
'LogicalResourceId': 'string',
'PhysicalResourceId': 'string',
'ResourceType': 'string',
'LastUpdatedTimestamp': datetime(2015, 1, 1),
'ResourceStatus': 'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'DELETE_SKIPPED'|'UPDATE_IN_PROGRESS'|'UPDATE_FAILED'|'UPDATE_COMPLETE',
'ResourceStatusReason': 'string',
'Description': 'string',
'Metadata': 'string',
'DriftInformation': {
'StackResourceDriftStatus': 'IN_SYNC'|'MODIFIED'|'DELETED'|'NOT_CHECKED',
'LastCheckTimestamp': datetime(2015, 1, 1)
}
}
}
Response Structure
(dict) --
The output for a DescribeStackResource action.
StackResourceDetail (dict) --
A StackResourceDetail structure containing the description of the specified resource in the specified stack.
StackName (string) --
The name associated with the stack.
StackId (string) --
Unique identifier of the stack.
LogicalResourceId (string) --
The logical name of the resource specified in the template.
PhysicalResourceId (string) --
The name or unique identifier that corresponds to a physical instance ID of a resource supported by AWS CloudFormation.
ResourceType (string) --
Type of resource. ((For more information, go to AWS Resource Types Reference in the AWS CloudFormation User Guide.)
LastUpdatedTimestamp (datetime) --
Time the status was updated.
ResourceStatus (string) --
Current status of the resource.
ResourceStatusReason (string) --
Success/failure message associated with the resource.
Description (string) --
User defined description associated with the resource.
Metadata (string) --
The content of the Metadata attribute declared for the resource. For more information, see Metadata Attribute in the AWS CloudFormation User Guide.
DriftInformation (dict) --
Information about whether the resource's actual configuration differs, or has drifted , from its expected configuration, as defined in the stack template and any values specified as template parameters. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
StackResourceDriftStatus (string) --
Status of the resource's actual configuration compared to its expected configuration
LastCheckTimestamp (datetime) --
When AWS CloudFormation last checked if the resource had drifted from its expected configuration.
Returns drift information for the resources that have been checked for drift in the specified stack. This includes actual and expected configuration values for resources where AWS CloudFormation detects configuration drift.
For a given stack, there will be one StackResourceDrift for each stack resource that has been checked for drift. Resources that have not yet been checked for drift are not included. Resources that do not currently support drift detection are not checked, and so not included. For a list of resources that support drift detection, see Resources that Support Drift Detection .
Use DetectStackResourceDrift to detect drift on individual resources, or DetectStackDrift to detect drift on all supported resources for a given stack.
See also: AWS API Documentation
Request Syntax
response = client.describe_stack_resource_drifts(
StackName='string',
StackResourceDriftStatusFilters=[
'IN_SYNC'|'MODIFIED'|'DELETED'|'NOT_CHECKED',
],
NextToken='string',
MaxResults=123
)
[REQUIRED]
The name of the stack for which you want drift information.
The resource drift status values to use as filters for the resource drift results returned.
dict
Response Syntax
{
'StackResourceDrifts': [
{
'StackId': 'string',
'LogicalResourceId': 'string',
'PhysicalResourceId': 'string',
'PhysicalResourceIdContext': [
{
'Key': 'string',
'Value': 'string'
},
],
'ResourceType': 'string',
'ExpectedProperties': 'string',
'ActualProperties': 'string',
'PropertyDifferences': [
{
'PropertyPath': 'string',
'ExpectedValue': 'string',
'ActualValue': 'string',
'DifferenceType': 'ADD'|'REMOVE'|'NOT_EQUAL'
},
],
'StackResourceDriftStatus': 'IN_SYNC'|'MODIFIED'|'DELETED'|'NOT_CHECKED',
'Timestamp': datetime(2015, 1, 1)
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
StackResourceDrifts (list) --
Drift information for the resources that have been checked for drift in the specified stack. This includes actual and expected configuration values for resources where AWS CloudFormation detects drift.
For a given stack, there will be one StackResourceDrift for each stack resource that has been checked for drift. Resources that have not yet been checked for drift are not included. Resources that do not currently support drift detection are not checked, and so not included. For a list of resources that support drift detection, see Resources that Support Drift Detection .
(dict) --
Contains the drift information for a resource that has been checked for drift. This includes actual and expected property values for resources in which AWS CloudFormation has detected drift. Only resource properties explicitly defined in the stack template are checked for drift. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
Resources that do not currently support drift detection cannot be checked. For a list of resources that support drift detection, see Resources that Support Drift Detection .
Use DetectStackResourceDrift to detect drift on individual resources, or DetectStackDrift to detect drift on all resources in a given stack that support drift detection.
StackId (string) --
The ID of the stack.
LogicalResourceId (string) --
The logical name of the resource specified in the template.
PhysicalResourceId (string) --
The name or unique identifier that corresponds to a physical instance ID of a resource supported by AWS CloudFormation.
PhysicalResourceIdContext (list) --
Context information that enables AWS CloudFormation to uniquely identify a resource. AWS CloudFormation uses context key-value pairs in cases where a resource's logical and physical IDs are not enough to uniquely identify that resource. Each context key-value pair specifies a unique resource that contains the targeted resource.
(dict) --
Context information that enables AWS CloudFormation to uniquely identify a resource. AWS CloudFormation uses context key-value pairs in cases where a resource's logical and physical IDs are not enough to uniquely identify that resource. Each context key-value pair specifies a resource that contains the targeted resource.
Key (string) --
The resource context key.
Value (string) --
The resource context value.
ResourceType (string) --
The type of the resource.
ExpectedProperties (string) --
A JSON structure containing the expected property values of the stack resource, as defined in the stack template and any values specified as template parameters.
For resources whose StackResourceDriftStatus is DELETED , this structure will not be present.
ActualProperties (string) --
A JSON structure containing the actual property values of the stack resource.
For resources whose StackResourceDriftStatus is DELETED , this structure will not be present.
PropertyDifferences (list) --
A collection of the resource properties whose actual values differ from their expected values. These will be present only for resources whose StackResourceDriftStatus is MODIFIED .
(dict) --
Information about a resource property whose actual value differs from its expected value, as defined in the stack template and any values specified as template parameters. These will be present only for resources whose StackResourceDriftStatus is MODIFIED . For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
PropertyPath (string) --
The fully-qualified path to the resource property.
ExpectedValue (string) --
The expected property value of the resource property, as defined in the stack template and any values specified as template parameters.
ActualValue (string) --
The actual property value of the resource property.
DifferenceType (string) --
The type of property difference.
StackResourceDriftStatus (string) --
Status of the resource's actual configuration compared to its expected configuration
Timestamp (datetime) --
Time at which AWS CloudFormation performed drift detection on the stack resource.
NextToken (string) --
If the request doesn't return all of the remaining results, NextToken is set to a token. To retrieve the next set of results, call DescribeStackResourceDrifts again and assign that token to the request object's NextToken parameter. If the request returns all results, NextToken is set to null .
Returns AWS resource descriptions for running and deleted stacks. If StackName is specified, all the associated resources that are part of the stack are returned. If PhysicalResourceId is specified, the associated resources of the stack that the resource belongs to are returned.
Note
Only the first 100 resources will be returned. If your stack has more resources than this, you should use ListStackResources instead.
For deleted stacks, DescribeStackResources returns resource information for up to 90 days after the stack has been deleted.
You must specify either StackName or PhysicalResourceId , but not both. In addition, you can specify LogicalResourceId to filter the returned result. For more information about resources, the LogicalResourceId and PhysicalResourceId , go to the AWS CloudFormation User Guide .
Note
A ValidationError is returned if you specify both StackName and PhysicalResourceId in the same request.
See also: AWS API Documentation
Request Syntax
response = client.describe_stack_resources(
StackName='string',
LogicalResourceId='string',
PhysicalResourceId='string'
)
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
Required: Conditional. If you do not specify StackName , you must specify PhysicalResourceId .
The logical name of the resource as specified in the template.
Default: There is no default value.
The name or unique identifier that corresponds to a physical instance ID of a resource supported by AWS CloudFormation.
For example, for an Amazon Elastic Compute Cloud (EC2) instance, PhysicalResourceId corresponds to the InstanceId . You can pass the EC2 InstanceId to DescribeStackResources to find which stack the instance belongs to and what other resources are part of the stack.
Required: Conditional. If you do not specify PhysicalResourceId , you must specify StackName .
Default: There is no default value.
dict
Response Syntax
{
'StackResources': [
{
'StackName': 'string',
'StackId': 'string',
'LogicalResourceId': 'string',
'PhysicalResourceId': 'string',
'ResourceType': 'string',
'Timestamp': datetime(2015, 1, 1),
'ResourceStatus': 'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'DELETE_SKIPPED'|'UPDATE_IN_PROGRESS'|'UPDATE_FAILED'|'UPDATE_COMPLETE',
'ResourceStatusReason': 'string',
'Description': 'string',
'DriftInformation': {
'StackResourceDriftStatus': 'IN_SYNC'|'MODIFIED'|'DELETED'|'NOT_CHECKED',
'LastCheckTimestamp': datetime(2015, 1, 1)
}
},
]
}
Response Structure
(dict) --
The output for a DescribeStackResources action.
StackResources (list) --
A list of StackResource structures.
(dict) --
The StackResource data type.
StackName (string) --
The name associated with the stack.
StackId (string) --
Unique identifier of the stack.
LogicalResourceId (string) --
The logical name of the resource specified in the template.
PhysicalResourceId (string) --
The name or unique identifier that corresponds to a physical instance ID of a resource supported by AWS CloudFormation.
ResourceType (string) --
Type of resource. (For more information, go to AWS Resource Types Reference in the AWS CloudFormation User Guide.)
Timestamp (datetime) --
Time the status was updated.
ResourceStatus (string) --
Current status of the resource.
ResourceStatusReason (string) --
Success/failure message associated with the resource.
Description (string) --
User defined description associated with the resource.
DriftInformation (dict) --
Information about whether the resource's actual configuration differs, or has drifted , from its expected configuration, as defined in the stack template and any values specified as template parameters. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
StackResourceDriftStatus (string) --
Status of the resource's actual configuration compared to its expected configuration
LastCheckTimestamp (datetime) --
When AWS CloudFormation last checked if the resource had drifted from its expected configuration.
Returns the description of the specified stack set.
See also: AWS API Documentation
Request Syntax
response = client.describe_stack_set(
StackSetName='string'
)
[REQUIRED]
The name or unique ID of the stack set whose description you want.
{
'StackSet': {
'StackSetName': 'string',
'StackSetId': 'string',
'Description': 'string',
'Status': 'ACTIVE'|'DELETED',
'TemplateBody': 'string',
'Parameters': [
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
'Capabilities': [
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'StackSetARN': 'string',
'AdministrationRoleARN': 'string',
'ExecutionRoleName': 'string'
}
}
Response Structure
The specified stack set.
The name that's associated with the stack set.
The ID of the stack set.
A description of the stack set that you specify when the stack set is created or updated.
The status of the stack set.
The structure that contains the body of the template that was used to create or update the stack set.
A list of input parameters for a stack set.
The Parameter data type.
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
The input value associated with the parameter.
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
The capabilities that are allowed in the stack set. Some stack set templates might include resources that can affect permissions in your AWS account—for example, by creating new AWS Identity and Access Management (IAM) users. For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates.
A list of tags that specify information about the stack set. A maximum number of 50 tags can be specified.
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
The Amazon Resource Number (ARN) of the stack set.
The Amazon Resource Number (ARN) of the IAM role used to create or update the stack set.
Use customized administrator roles to control which users or groups can manage specific stack sets within the same administrator account. For more information, see Prerequisites: Granting Permissions for Stack Set Operations in the AWS CloudFormation User Guide .
The name of the IAM execution role used to create or update the stack set.
Use customized execution roles to control which stack resources users and groups can include in their stack sets.
Returns the description of the specified stack set operation.
See also: AWS API Documentation
Request Syntax
response = client.describe_stack_set_operation(
StackSetName='string',
OperationId='string'
)
[REQUIRED]
The name or the unique stack ID of the stack set for the stack operation.
[REQUIRED]
The unique ID of the stack set operation.
dict
Response Syntax
{
'StackSetOperation': {
'OperationId': 'string',
'StackSetId': 'string',
'Action': 'CREATE'|'UPDATE'|'DELETE',
'Status': 'RUNNING'|'SUCCEEDED'|'FAILED'|'STOPPING'|'STOPPED',
'OperationPreferences': {
'RegionOrder': [
'string',
],
'FailureToleranceCount': 123,
'FailureTolerancePercentage': 123,
'MaxConcurrentCount': 123,
'MaxConcurrentPercentage': 123
},
'RetainStacks': True|False,
'AdministrationRoleARN': 'string',
'ExecutionRoleName': 'string',
'CreationTimestamp': datetime(2015, 1, 1),
'EndTimestamp': datetime(2015, 1, 1)
}
}
Response Structure
(dict) --
StackSetOperation (dict) --
The specified stack set operation.
OperationId (string) --
The unique ID of a stack set operation.
StackSetId (string) --
The ID of the stack set.
Action (string) --
The type of stack set operation: CREATE , UPDATE , or DELETE . Create and delete operations affect only the specified stack set instances that are associated with the specified stack set. Update operations affect both the stack set itself, as well as all associated stack set instances.
Status (string) --
The status of the operation.
OperationPreferences (dict) --
The preferences for how AWS CloudFormation performs this stack set operation.
RegionOrder (list) --
The order of the regions in where you want to perform the stack operation.
FailureToleranceCount (integer) --
The number of accounts, per region, for which this operation can fail before AWS CloudFormation stops the operation in that region. If the operation is stopped in a region, AWS CloudFormation doesn't attempt the operation in any subsequent regions.
Conditional: You must specify either FailureToleranceCount or FailureTolerancePercentage (but not both).
FailureTolerancePercentage (integer) --
The percentage of accounts, per region, for which this stack operation can fail before AWS CloudFormation stops the operation in that region. If the operation is stopped in a region, AWS CloudFormation doesn't attempt the operation in any subsequent regions.
When calculating the number of accounts based on the specified percentage, AWS CloudFormation rounds down to the next whole number.
Conditional: You must specify either FailureToleranceCount or FailureTolerancePercentage , but not both.
MaxConcurrentCount (integer) --
The maximum number of accounts in which to perform this operation at one time. This is dependent on the value of FailureToleranceCount —MaxConcurrentCount is at most one more than the FailureToleranceCount .
Note that this setting lets you specify the maximum for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling.
Conditional: You must specify either MaxConcurrentCount or MaxConcurrentPercentage , but not both.
MaxConcurrentPercentage (integer) --
The maximum percentage of accounts in which to perform this operation at one time.
When calculating the number of accounts based on the specified percentage, AWS CloudFormation rounds down to the next whole number. This is true except in cases where rounding down would result is zero. In this case, CloudFormation sets the number as one instead.
Note that this setting lets you specify the maximum for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling.
Conditional: You must specify either MaxConcurrentCount or MaxConcurrentPercentage , but not both.
RetainStacks (boolean) --
For stack set operations of action type DELETE , specifies whether to remove the stack instances from the specified stack set, but doesn't delete the stacks. You can't reassociate a retained stack, or add an existing, saved stack to a new stack set.
AdministrationRoleARN (string) --
The Amazon Resource Number (ARN) of the IAM role used to perform this stack set operation.
Use customized administrator roles to control which users or groups can manage specific stack sets within the same administrator account. For more information, see Define Permissions for Multiple Administrators in the AWS CloudFormation User Guide .
ExecutionRoleName (string) --
The name of the IAM execution role used to create or update the stack set.
Use customized execution roles to control which stack resources users and groups can include in their stack sets.
CreationTimestamp (datetime) --
The time at which the operation was initiated. Note that the creation times for the stack set operation might differ from the creation time of the individual stacks themselves. This is because AWS CloudFormation needs to perform preparatory work for the operation, such as dispatching the work to the requested regions, before actually creating the first stacks.
EndTimestamp (datetime) --
The time at which the stack set operation ended, across all accounts and regions specified. Note that this doesn't necessarily mean that the stack set operation was successful, or even attempted, in each account or region.
Returns the description for the specified stack; if no stack name was specified, then it returns the description for all the stacks created.
Note
If the stack does not exist, an AmazonCloudFormationException is returned.
See also: AWS API Documentation
Request Syntax
response = client.describe_stacks(
StackName='string',
NextToken='string'
)
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
dict
Response Syntax
{
'Stacks': [
{
'StackId': 'string',
'StackName': 'string',
'ChangeSetId': 'string',
'Description': 'string',
'Parameters': [
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
'CreationTime': datetime(2015, 1, 1),
'DeletionTime': datetime(2015, 1, 1),
'LastUpdatedTime': datetime(2015, 1, 1),
'RollbackConfiguration': {
'RollbackTriggers': [
{
'Arn': 'string',
'Type': 'string'
},
],
'MonitoringTimeInMinutes': 123
},
'StackStatus': 'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'ROLLBACK_IN_PROGRESS'|'ROLLBACK_FAILED'|'ROLLBACK_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'UPDATE_IN_PROGRESS'|'UPDATE_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_COMPLETE'|'UPDATE_ROLLBACK_IN_PROGRESS'|'UPDATE_ROLLBACK_FAILED'|'UPDATE_ROLLBACK_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_ROLLBACK_COMPLETE'|'REVIEW_IN_PROGRESS',
'StackStatusReason': 'string',
'DisableRollback': True|False,
'NotificationARNs': [
'string',
],
'TimeoutInMinutes': 123,
'Capabilities': [
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
'Outputs': [
{
'OutputKey': 'string',
'OutputValue': 'string',
'Description': 'string',
'ExportName': 'string'
},
],
'RoleARN': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'EnableTerminationProtection': True|False,
'ParentId': 'string',
'RootId': 'string',
'DriftInformation': {
'StackDriftStatus': 'DRIFTED'|'IN_SYNC'|'UNKNOWN'|'NOT_CHECKED',
'LastCheckTimestamp': datetime(2015, 1, 1)
}
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
The output for a DescribeStacks action.
Stacks (list) --
A list of stack structures.
(dict) --
The Stack data type.
StackId (string) --
Unique identifier of the stack.
StackName (string) --
The name associated with the stack.
ChangeSetId (string) --
The unique ID of the change set.
Description (string) --
A user-defined description associated with the stack.
Parameters (list) --
A list of Parameter structures.
(dict) --
The Parameter data type.
ParameterKey (string) --
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
ParameterValue (string) --
The input value associated with the parameter.
UsePreviousValue (boolean) --
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
ResolvedValue (string) --
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
CreationTime (datetime) --
The time at which the stack was created.
DeletionTime (datetime) --
The time the stack was deleted.
LastUpdatedTime (datetime) --
The time the stack was last updated. This field will only be returned if the stack has been updated at least once.
RollbackConfiguration (dict) --
The rollback triggers for AWS CloudFormation to monitor during stack creation and updating operations, and for the specified monitoring period afterwards.
RollbackTriggers (list) --
The triggers to monitor during stack creation or update actions.
By default, AWS CloudFormation saves the rollback triggers specified for a stack and applies them to any subsequent update operations for the stack, unless you specify otherwise. If you do specify rollback triggers for this parameter, those triggers replace any list of triggers previously specified for the stack. This means:
If a specified trigger is missing, the entire stack operation fails and is rolled back.
(dict) --
A rollback trigger AWS CloudFormation monitors during creation and updating of stacks. If any of the alarms you specify goes to ALARM state during the stack operation or within the specified monitoring period afterwards, CloudFormation rolls back the entire stack operation.
Arn (string) --
The Amazon Resource Name (ARN) of the rollback trigger.
If a specified trigger is missing, the entire stack operation fails and is rolled back.
Type (string) --
The resource type of the rollback trigger. Currently, AWS::CloudWatch::Alarm is the only supported resource type.
MonitoringTimeInMinutes (integer) --
The amount of time, in minutes, during which CloudFormation should monitor all the rollback triggers after the stack creation or update operation deploys all necessary resources.
The default is 0 minutes.
If you specify a monitoring period but do not specify any rollback triggers, CloudFormation still waits the specified period of time before cleaning up old resources after update operations. You can use this monitoring period to perform any manual stack validation desired, and manually cancel the stack creation or update (using CancelUpdateStack , for example) as necessary.
If you specify 0 for this parameter, CloudFormation still monitors the specified rollback triggers during stack creation and update operations. Then, for update operations, it begins disposing of old resources immediately once the operation completes.
StackStatus (string) --
Current status of the stack.
StackStatusReason (string) --
Success/failure message associated with the stack status.
DisableRollback (boolean) --
Boolean to enable or disable rollback on stack creation failures:
NotificationARNs (list) --
SNS topic ARNs to which stack related events are published.
TimeoutInMinutes (integer) --
The amount of time within which stack creation should complete.
Capabilities (list) --
The capabilities allowed in the stack.
Outputs (list) --
A list of output structures.
(dict) --
The Output data type.
OutputKey (string) --
The key associated with the output.
OutputValue (string) --
The value associated with the output.
Description (string) --
User defined description associated with the output.
ExportName (string) --
The name of the export associated with the output.
RoleARN (string) --
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that is associated with the stack. During a stack operation, AWS CloudFormation uses this role's credentials to make calls on your behalf.
Tags (list) --
A list of Tag s that specify information about the stack.
(dict) --
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Key (string) --
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Value (string) --
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
EnableTerminationProtection (boolean) --
Whether termination protection is enabled for the stack.
For nested stacks , termination protection is set on the root stack and cannot be changed directly on the nested stack. For more information, see Protecting a Stack From Being Deleted in the AWS CloudFormation User Guide .
ParentId (string) --
For nested stacks--stacks created as resources for another stack--the stack ID of the direct parent of this stack. For the first level of nested stacks, the root stack is also the parent stack.
For more information, see Working with Nested Stacks in the AWS CloudFormation User Guide .
RootId (string) --
For nested stacks--stacks created as resources for another stack--the stack ID of the the top-level stack to which the nested stack ultimately belongs.
For more information, see Working with Nested Stacks in the AWS CloudFormation User Guide .
DriftInformation (dict) --
Information on whether a stack's actual configuration differs, or has drifted , from it's expected configuration, as defined in the stack template and any values specified as template parameters. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
StackDriftStatus (string) --
Status of the stack's actual configuration compared to its expected template configuration.
LastCheckTimestamp (datetime) --
Most recent time when a drift detection operation was initiated on the stack, or any of its individual resources that support drift detection.
NextToken (string) --
If the output exceeds 1 MB in size, a string that identifies the next page of stacks. If no additional page exists, this value is null.
Detects whether a stack's actual configuration differs, or has drifted , from it's expected configuration, as defined in the stack template and any values specified as template parameters. For each resource in the stack that supports drift detection, AWS CloudFormation compares the actual configuration of the resource with its expected template configuration. Only resource properties explicitly defined in the stack template are checked for drift. A stack is considered to have drifted if one or more of its resources differ from their expected template configurations. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
Use DetectStackDrift to detect drift on all supported resources for a given stack, or DetectStackResourceDrift to detect drift on individual resources.
For a list of stack resources that currently support drift detection, see Resources that Support Drift Detection .
DetectStackDrift can take up to several minutes, depending on the number of resources contained within the stack. Use DescribeStackDriftDetectionStatus to monitor the progress of a detect stack drift operation. Once the drift detection operation has completed, use DescribeStackResourceDrifts to return drift information about the stack and its resources.
When detecting drift on a stack, AWS CloudFormation does not detect drift on any nested stacks belonging to that stack. Perform DetectStackDrift directly on the nested stack itself.
See also: AWS API Documentation
Request Syntax
response = client.detect_stack_drift(
StackName='string',
LogicalResourceIds=[
'string',
]
)
[REQUIRED]
The name of the stack for which you want to detect drift.
The logical names of any resources you want to use as filters.
dict
Response Syntax
{
'StackDriftDetectionId': 'string'
}
Response Structure
(dict) --
StackDriftDetectionId (string) --
The ID of the drift detection results of this operation.
AWS CloudFormation generates new results, with a new drift detection ID, each time this operation is run. However, the number of drift results AWS CloudFormation retains for any given stack, and for how long, may vary.
Returns information about whether a resource's actual configuration differs, or has drifted , from it's expected configuration, as defined in the stack template and any values specified as template parameters. This information includes actual and expected property values for resources in which AWS CloudFormation detects drift. Only resource properties explicitly defined in the stack template are checked for drift. For more information about stack and resource drift, see Detecting Unregulated Configuration Changes to Stacks and Resources .
Use DetectStackResourceDrift to detect drift on individual resources, or DetectStackDrift to detect drift on all resources in a given stack that support drift detection.
Resources that do not currently support drift detection cannot be checked. For a list of resources that support drift detection, see Resources that Support Drift Detection .
See also: AWS API Documentation
Request Syntax
response = client.detect_stack_resource_drift(
StackName='string',
LogicalResourceId='string'
)
[REQUIRED]
The name of the stack to which the resource belongs.
[REQUIRED]
The logical name of the resource for which to return drift information.
dict
Response Syntax
{
'StackResourceDrift': {
'StackId': 'string',
'LogicalResourceId': 'string',
'PhysicalResourceId': 'string',
'PhysicalResourceIdContext': [
{
'Key': 'string',
'Value': 'string'
},
],
'ResourceType': 'string',
'ExpectedProperties': 'string',
'ActualProperties': 'string',
'PropertyDifferences': [
{
'PropertyPath': 'string',
'ExpectedValue': 'string',
'ActualValue': 'string',
'DifferenceType': 'ADD'|'REMOVE'|'NOT_EQUAL'
},
],
'StackResourceDriftStatus': 'IN_SYNC'|'MODIFIED'|'DELETED'|'NOT_CHECKED',
'Timestamp': datetime(2015, 1, 1)
}
}
Response Structure
(dict) --
StackResourceDrift (dict) --
Information about whether the resource's actual configuration has drifted from its expected template configuration, including actual and expected property values and any differences detected.
StackId (string) --
The ID of the stack.
LogicalResourceId (string) --
The logical name of the resource specified in the template.
PhysicalResourceId (string) --
The name or unique identifier that corresponds to a physical instance ID of a resource supported by AWS CloudFormation.
PhysicalResourceIdContext (list) --
Context information that enables AWS CloudFormation to uniquely identify a resource. AWS CloudFormation uses context key-value pairs in cases where a resource's logical and physical IDs are not enough to uniquely identify that resource. Each context key-value pair specifies a unique resource that contains the targeted resource.
(dict) --
Context information that enables AWS CloudFormation to uniquely identify a resource. AWS CloudFormation uses context key-value pairs in cases where a resource's logical and physical IDs are not enough to uniquely identify that resource. Each context key-value pair specifies a resource that contains the targeted resource.
Key (string) --
The resource context key.
Value (string) --
The resource context value.
ResourceType (string) --
The type of the resource.
ExpectedProperties (string) --
A JSON structure containing the expected property values of the stack resource, as defined in the stack template and any values specified as template parameters.
For resources whose StackResourceDriftStatus is DELETED , this structure will not be present.
ActualProperties (string) --
A JSON structure containing the actual property values of the stack resource.
For resources whose StackResourceDriftStatus is DELETED , this structure will not be present.
PropertyDifferences (list) --
A collection of the resource properties whose actual values differ from their expected values. These will be present only for resources whose StackResourceDriftStatus is MODIFIED .
(dict) --
Information about a resource property whose actual value differs from its expected value, as defined in the stack template and any values specified as template parameters. These will be present only for resources whose StackResourceDriftStatus is MODIFIED . For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
PropertyPath (string) --
The fully-qualified path to the resource property.
ExpectedValue (string) --
The expected property value of the resource property, as defined in the stack template and any values specified as template parameters.
ActualValue (string) --
The actual property value of the resource property.
DifferenceType (string) --
The type of property difference.
StackResourceDriftStatus (string) --
Status of the resource's actual configuration compared to its expected configuration
Timestamp (datetime) --
Time at which AWS CloudFormation performed drift detection on the stack resource.
Returns the estimated monthly cost of a template. The return value is an AWS Simple Monthly Calculator URL with a query string that describes the resources required to run the template.
See also: AWS API Documentation
Request Syntax
response = client.estimate_template_cost(
TemplateBody='string',
TemplateURL='string',
Parameters=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
]
)
Structure containing the template body with a minimum length of 1 byte and a maximum length of 51,200 bytes. (For more information, go to Template Anatomy in the AWS CloudFormation User Guide.)
Conditional: You must pass TemplateBody or TemplateURL . If both are passed, only TemplateBody is used.
Location of file containing the template body. The URL must point to a template that is located in an Amazon S3 bucket. For more information, go to Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must pass TemplateURL or TemplateBody . If both are passed, only TemplateBody is used.
A list of Parameter structures that specify input parameters.
The Parameter data type.
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
The input value associated with the parameter.
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
dict
Response Syntax
{
'Url': 'string'
}
Response Structure
(dict) --
The output for a EstimateTemplateCost action.
Url (string) --
An AWS Simple Monthly Calculator URL with a query string that describes the resources required to run the template.
Updates a stack using the input information that was provided when the specified change set was created. After the call successfully completes, AWS CloudFormation starts updating the stack. Use the DescribeStacks action to view the status of the update.
When you execute a change set, AWS CloudFormation deletes all other change sets associated with the stack because they aren't valid for the updated stack.
If a stack policy is associated with the stack, AWS CloudFormation enforces the policy during the update. You can't specify a temporary stack policy that overrides the current policy.
See also: AWS API Documentation
Request Syntax
response = client.execute_change_set(
ChangeSetName='string',
StackName='string',
ClientRequestToken='string'
)
[REQUIRED]
The name or ARN of the change set that you want use to update the specified stack.
dict
Response Syntax
{}
Response Structure
(dict) --
The output for the ExecuteChangeSet action.
Generate a presigned url given a client, its method, and arguments
The presigned url
Create a paginator for an operation.
Returns the stack policy for a specified stack. If a stack doesn't have a policy, a null value is returned.
See also: AWS API Documentation
Request Syntax
response = client.get_stack_policy(
StackName='string'
)
[REQUIRED]
The name or unique stack ID that is associated with the stack whose policy you want to get.
{
'StackPolicyBody': 'string'
}
Response Structure
The output for the GetStackPolicy action.
Structure containing the stack policy body. (For more information, go to Prevent Updates to Stack Resources in the AWS CloudFormation User Guide.)
Returns the template body for a specified stack. You can get the template for running or deleted stacks.
For deleted stacks, GetTemplate returns the template for up to 90 days after the stack has been deleted.
Note
If the template does not exist, a ValidationError is returned.
See also: AWS API Documentation
Request Syntax
response = client.get_template(
StackName='string',
ChangeSetName='string',
TemplateStage='Original'|'Processed'
)
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
For templates that include transforms, the stage of the template that AWS CloudFormation returns. To get the user-submitted template, specify Original . To get the template after AWS CloudFormation has processed all transforms, specify Processed .
If the template doesn't include transforms, Original and Processed return the same template. By default, AWS CloudFormation specifies Original .
dict
Response Syntax
{
'TemplateBody': {},
'StagesAvailable': [
'Original'|'Processed',
]
}
Response Structure
(dict) --
The output for GetTemplate action.
TemplateBody (dict) --
Structure containing the template body. (For more information, go to Template Anatomy in the AWS CloudFormation User Guide.)
AWS CloudFormation returns the same template that was used when the stack was created.
StagesAvailable (list) --
The stage of the template that you can retrieve. For stacks, the Original and Processed templates are always available. For change sets, the Original template is always available. After AWS CloudFormation finishes creating the change set, the Processed template becomes available.
Returns information about a new or existing template. The GetTemplateSummary action is useful for viewing parameter information, such as default parameter values and parameter types, before you create or update a stack or stack set.
You can use the GetTemplateSummary action when you submit a template, or you can get template information for a stack set, or a running or deleted stack.
For deleted stacks, GetTemplateSummary returns the template information for up to 90 days after the stack has been deleted. If the template does not exist, a ValidationError is returned.
See also: AWS API Documentation
Request Syntax
response = client.get_template_summary(
TemplateBody='string',
TemplateURL='string',
StackName='string',
StackSetName='string'
)
Structure containing the template body with a minimum length of 1 byte and a maximum length of 51,200 bytes. For more information about templates, see Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify only one of the following parameters: StackName , StackSetName , TemplateBody , or TemplateURL .
Location of file containing the template body. The URL must point to a template (max size: 460,800 bytes) that is located in an Amazon S3 bucket. For more information about templates, see Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify only one of the following parameters: StackName , StackSetName , TemplateBody , or TemplateURL .
The name or the stack ID that is associated with the stack, which are not always interchangeable. For running stacks, you can specify either the stack's name or its unique stack ID. For deleted stack, you must specify the unique stack ID.
Conditional: You must specify only one of the following parameters: StackName , StackSetName , TemplateBody , or TemplateURL .
The name or unique ID of the stack set from which the stack was created.
Conditional: You must specify only one of the following parameters: StackName , StackSetName , TemplateBody , or TemplateURL .
dict
Response Syntax
{
'Parameters': [
{
'ParameterKey': 'string',
'DefaultValue': 'string',
'ParameterType': 'string',
'NoEcho': True|False,
'Description': 'string',
'ParameterConstraints': {
'AllowedValues': [
'string',
]
}
},
],
'Description': 'string',
'Capabilities': [
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
'CapabilitiesReason': 'string',
'ResourceTypes': [
'string',
],
'Version': 'string',
'Metadata': 'string',
'DeclaredTransforms': [
'string',
]
}
Response Structure
(dict) --
The output for the GetTemplateSummary action.
Parameters (list) --
A list of parameter declarations that describe various properties for each parameter.
(dict) --
The ParameterDeclaration data type.
ParameterKey (string) --
The name that is associated with the parameter.
DefaultValue (string) --
The default value of the parameter.
ParameterType (string) --
The type of parameter.
NoEcho (boolean) --
Flag that indicates whether the parameter value is shown as plain text in logs and in the AWS Management Console.
Description (string) --
The description that is associate with the parameter.
ParameterConstraints (dict) --
The criteria that AWS CloudFormation uses to validate parameter values.
AllowedValues (list) --
A list of values that are permitted for a parameter.
Description (string) --
The value that is defined in the Description property of the template.
Capabilities (list) --
The capabilities found within the template. If your template contains IAM resources, you must specify the CAPABILITY_IAM or CAPABILITY_NAMED_IAM value for this parameter when you use the CreateStack or UpdateStack actions with your template; otherwise, those actions return an InsufficientCapabilities error.
For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates .
CapabilitiesReason (string) --
The list of resources that generated the values in the Capabilities response element.
ResourceTypes (list) --
A list of all the template resource types that are defined in the template, such as AWS::EC2::Instance , AWS::Dynamo::Table , and Custom::MyCustomInstance .
Version (string) --
The AWS template format version, which identifies the capabilities of the template.
Metadata (string) --
The value that is defined for the Metadata property of the template.
DeclaredTransforms (list) --
A list of the transforms that are declared in the template.
Returns an object that can wait for some condition.
Returns the ID and status of each active change set for a stack. For example, AWS CloudFormation lists change sets that are in the CREATE_IN_PROGRESS or CREATE_PENDING state.
See also: AWS API Documentation
Request Syntax
response = client.list_change_sets(
StackName='string',
NextToken='string'
)
[REQUIRED]
The name or the Amazon Resource Name (ARN) of the stack for which you want to list change sets.
dict
Response Syntax
{
'Summaries': [
{
'StackId': 'string',
'StackName': 'string',
'ChangeSetId': 'string',
'ChangeSetName': 'string',
'ExecutionStatus': 'UNAVAILABLE'|'AVAILABLE'|'EXECUTE_IN_PROGRESS'|'EXECUTE_COMPLETE'|'EXECUTE_FAILED'|'OBSOLETE',
'Status': 'CREATE_PENDING'|'CREATE_IN_PROGRESS'|'CREATE_COMPLETE'|'DELETE_COMPLETE'|'FAILED',
'StatusReason': 'string',
'CreationTime': datetime(2015, 1, 1),
'Description': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
The output for the ListChangeSets action.
Summaries (list) --
A list of ChangeSetSummary structures that provides the ID and status of each change set for the specified stack.
(dict) --
The ChangeSetSummary structure describes a change set, its status, and the stack with which it's associated.
StackId (string) --
The ID of the stack with which the change set is associated.
StackName (string) --
The name of the stack with which the change set is associated.
ChangeSetId (string) --
The ID of the change set.
ChangeSetName (string) --
The name of the change set.
ExecutionStatus (string) --
If the change set execution status is AVAILABLE , you can execute the change set. If you can’t execute the change set, the status indicates why. For example, a change set might be in an UNAVAILABLE state because AWS CloudFormation is still creating it or in an OBSOLETE state because the stack was already updated.
Status (string) --
The state of the change set, such as CREATE_IN_PROGRESS , CREATE_COMPLETE , or FAILED .
StatusReason (string) --
A description of the change set's status. For example, if your change set is in the FAILED state, AWS CloudFormation shows the error message.
CreationTime (datetime) --
The start time when the change set was created, in UTC.
Description (string) --
Descriptive information about the change set.
NextToken (string) --
If the output exceeds 1 MB, a string that identifies the next page of change sets. If there is no additional page, this value is null.
Lists all exported output values in the account and region in which you call this action. Use this action to see the exported output values that you can import into other stacks. To import values, use the ` Fn::ImportValue https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/intrinsic-function-reference-importvalue.html`__ function.
For more information, see AWS CloudFormation Export Stack Output Values .
See also: AWS API Documentation
Request Syntax
response = client.list_exports(
NextToken='string'
)
{
'Exports': [
{
'ExportingStackId': 'string',
'Name': 'string',
'Value': 'string'
},
],
'NextToken': 'string'
}
Response Structure
The output for the ListExports action.
The Export structure describes the exported output values for a stack.
The stack that contains the exported output name and value.
The name of exported output value. Use this name and the Fn::ImportValue function to import the associated value into other stacks. The name is defined in the Export field in the associated stack's Outputs section.
The value of the exported output, such as a resource physical ID. This value is defined in the Export field in the associated stack's Outputs section.
If the output exceeds 100 exported output values, a string that identifies the next page of exports. If there is no additional page, this value is null.
Lists all stacks that are importing an exported output value. To modify or remove an exported output value, first use this action to see which stacks are using it. To see the exported output values in your account, see ListExports .
For more information about importing an exported output value, see the ` Fn::ImportValue https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/intrinsic-function-reference-importvalue.html`__ function.
See also: AWS API Documentation
Request Syntax
response = client.list_imports(
ExportName='string',
NextToken='string'
)
[REQUIRED]
The name of the exported output value. AWS CloudFormation returns the stack names that are importing this value.
dict
Response Syntax
{
'Imports': [
'string',
],
'NextToken': 'string'
}
Response Structure
(dict) --
Imports (list) --
A list of stack names that are importing the specified exported output value.
NextToken (string) --
A string that identifies the next page of exports. If there is no additional page, this value is null.
Returns summary information about stack instances that are associated with the specified stack set. You can filter for stack instances that are associated with a specific AWS account name or region.
See also: AWS API Documentation
Request Syntax
response = client.list_stack_instances(
StackSetName='string',
NextToken='string',
MaxResults=123,
StackInstanceAccount='string',
StackInstanceRegion='string'
)
[REQUIRED]
The name or unique ID of the stack set that you want to list stack instances for.
dict
Response Syntax
{
'Summaries': [
{
'StackSetId': 'string',
'Region': 'string',
'Account': 'string',
'StackId': 'string',
'Status': 'CURRENT'|'OUTDATED'|'INOPERABLE',
'StatusReason': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Summaries (list) --
A list of StackInstanceSummary structures that contain information about the specified stack instances.
(dict) --
The structure that contains summary information about a stack instance.
StackSetId (string) --
The name or unique ID of the stack set that the stack instance is associated with.
Region (string) --
The name of the AWS region that the stack instance is associated with.
Account (string) --
The name of the AWS account that the stack instance is associated with.
StackId (string) --
The ID of the stack instance.
Status (string) --
The status of the stack instance, in terms of its synchronization with its associated stack set.
StatusReason (string) --
The explanation for the specific status code assigned to this stack instance.
NextToken (string) --
If the request doesn't return all of the remaining results, NextToken is set to a token. To retrieve the next set of results, call ListStackInstances again and assign that token to the request object's NextToken parameter. If the request returns all results, NextToken is set to null .
Returns descriptions of all resources of the specified stack.
For deleted stacks, ListStackResources returns resource information for up to 90 days after the stack has been deleted.
See also: AWS API Documentation
Request Syntax
response = client.list_stack_resources(
StackName='string',
NextToken='string'
)
[REQUIRED]
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
dict
Response Syntax
{
'StackResourceSummaries': [
{
'LogicalResourceId': 'string',
'PhysicalResourceId': 'string',
'ResourceType': 'string',
'LastUpdatedTimestamp': datetime(2015, 1, 1),
'ResourceStatus': 'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'DELETE_SKIPPED'|'UPDATE_IN_PROGRESS'|'UPDATE_FAILED'|'UPDATE_COMPLETE',
'ResourceStatusReason': 'string',
'DriftInformation': {
'StackResourceDriftStatus': 'IN_SYNC'|'MODIFIED'|'DELETED'|'NOT_CHECKED',
'LastCheckTimestamp': datetime(2015, 1, 1)
}
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
The output for a ListStackResources action.
StackResourceSummaries (list) --
A list of StackResourceSummary structures.
(dict) --
Contains high-level information about the specified stack resource.
LogicalResourceId (string) --
The logical name of the resource specified in the template.
PhysicalResourceId (string) --
The name or unique identifier that corresponds to a physical instance ID of the resource.
ResourceType (string) --
Type of resource. (For more information, go to AWS Resource Types Reference in the AWS CloudFormation User Guide.)
LastUpdatedTimestamp (datetime) --
Time the status was updated.
ResourceStatus (string) --
Current status of the resource.
ResourceStatusReason (string) --
Success/failure message associated with the resource.
DriftInformation (dict) --
Information about whether the resource's actual configuration differs, or has drifted , from its expected configuration, as defined in the stack template and any values specified as template parameters. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
StackResourceDriftStatus (string) --
Status of the resource's actual configuration compared to its expected configuration
LastCheckTimestamp (datetime) --
When AWS CloudFormation last checked if the resource had drifted from its expected configuration.
NextToken (string) --
If the output exceeds 1 MB, a string that identifies the next page of stack resources. If no additional page exists, this value is null.
Returns summary information about the results of a stack set operation.
See also: AWS API Documentation
Request Syntax
response = client.list_stack_set_operation_results(
StackSetName='string',
OperationId='string',
NextToken='string',
MaxResults=123
)
[REQUIRED]
The name or unique ID of the stack set that you want to get operation results for.
[REQUIRED]
The ID of the stack set operation.
dict
Response Syntax
{
'Summaries': [
{
'Account': 'string',
'Region': 'string',
'Status': 'PENDING'|'RUNNING'|'SUCCEEDED'|'FAILED'|'CANCELLED',
'StatusReason': 'string',
'AccountGateResult': {
'Status': 'SUCCEEDED'|'FAILED'|'SKIPPED',
'StatusReason': 'string'
}
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Summaries (list) --
A list of StackSetOperationResultSummary structures that contain information about the specified operation results, for accounts and regions that are included in the operation.
(dict) --
The structure that contains information about a specified operation's results for a given account in a given region.
Account (string) --
The name of the AWS account for this operation result.
Region (string) --
The name of the AWS region for this operation result.
Status (string) --
The result status of the stack set operation for the given account in the given region.
StatusReason (string) --
The reason for the assigned result status.
AccountGateResult (dict) --
The results of the account gate function AWS CloudFormation invokes, if present, before proceeding with stack set operations in an account
Status (string) --
The status of the account gate function.
StatusReason (string) --
The reason for the account gate status assigned to this account and region for the stack set operation.
NextToken (string) --
If the request doesn't return all results, NextToken is set to a token. To retrieve the next set of results, call ListOperationResults again and assign that token to the request object's NextToken parameter. If there are no remaining results, NextToken is set to null .
Returns summary information about operations performed on a stack set.
See also: AWS API Documentation
Request Syntax
response = client.list_stack_set_operations(
StackSetName='string',
NextToken='string',
MaxResults=123
)
[REQUIRED]
The name or unique ID of the stack set that you want to get operation summaries for.
dict
Response Syntax
{
'Summaries': [
{
'OperationId': 'string',
'Action': 'CREATE'|'UPDATE'|'DELETE',
'Status': 'RUNNING'|'SUCCEEDED'|'FAILED'|'STOPPING'|'STOPPED',
'CreationTimestamp': datetime(2015, 1, 1),
'EndTimestamp': datetime(2015, 1, 1)
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Summaries (list) --
A list of StackSetOperationSummary structures that contain summary information about operations for the specified stack set.
(dict) --
The structures that contain summary information about the specified operation.
OperationId (string) --
The unique ID of the stack set operation.
Action (string) --
The type of operation: CREATE , UPDATE , or DELETE . Create and delete operations affect only the specified stack instances that are associated with the specified stack set. Update operations affect both the stack set itself as well as all associated stack set instances.
Status (string) --
The overall status of the operation.
CreationTimestamp (datetime) --
The time at which the operation was initiated. Note that the creation times for the stack set operation might differ from the creation time of the individual stacks themselves. This is because AWS CloudFormation needs to perform preparatory work for the operation, such as dispatching the work to the requested regions, before actually creating the first stacks.
EndTimestamp (datetime) --
The time at which the stack set operation ended, across all accounts and regions specified. Note that this doesn't necessarily mean that the stack set operation was successful, or even attempted, in each account or region.
NextToken (string) --
If the request doesn't return all results, NextToken is set to a token. To retrieve the next set of results, call ListOperationResults again and assign that token to the request object's NextToken parameter. If there are no remaining results, NextToken is set to null .
Returns summary information about stack sets that are associated with the user.
See also: AWS API Documentation
Request Syntax
response = client.list_stack_sets(
NextToken='string',
MaxResults=123,
Status='ACTIVE'|'DELETED'
)
dict
Response Syntax
{
'Summaries': [
{
'StackSetName': 'string',
'StackSetId': 'string',
'Description': 'string',
'Status': 'ACTIVE'|'DELETED'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Summaries (list) --
A list of StackSetSummary structures that contain information about the user's stack sets.
(dict) --
The structures that contain summary information about the specified stack set.
StackSetName (string) --
The name of the stack set.
StackSetId (string) --
The ID of the stack set.
Description (string) --
A description of the stack set that you specify when the stack set is created or updated.
Status (string) --
The status of the stack set.
NextToken (string) --
If the request doesn't return all of the remaining results, NextToken is set to a token. To retrieve the next set of results, call ListStackInstances again and assign that token to the request object's NextToken parameter. If the request returns all results, NextToken is set to null .
Returns the summary information for stacks whose status matches the specified StackStatusFilter. Summary information for stacks that have been deleted is kept for 90 days after the stack is deleted. If no StackStatusFilter is specified, summary information for all stacks is returned (including existing stacks and stacks that have been deleted).
See also: AWS API Documentation
Request Syntax
response = client.list_stacks(
NextToken='string',
StackStatusFilter=[
'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'ROLLBACK_IN_PROGRESS'|'ROLLBACK_FAILED'|'ROLLBACK_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'UPDATE_IN_PROGRESS'|'UPDATE_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_COMPLETE'|'UPDATE_ROLLBACK_IN_PROGRESS'|'UPDATE_ROLLBACK_FAILED'|'UPDATE_ROLLBACK_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_ROLLBACK_COMPLETE'|'REVIEW_IN_PROGRESS',
]
)
Stack status to use as a filter. Specify one or more stack status codes to list only stacks with the specified status codes. For a complete list of stack status codes, see the StackStatus parameter of the Stack data type.
dict
Response Syntax
{
'StackSummaries': [
{
'StackId': 'string',
'StackName': 'string',
'TemplateDescription': 'string',
'CreationTime': datetime(2015, 1, 1),
'LastUpdatedTime': datetime(2015, 1, 1),
'DeletionTime': datetime(2015, 1, 1),
'StackStatus': 'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'ROLLBACK_IN_PROGRESS'|'ROLLBACK_FAILED'|'ROLLBACK_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'UPDATE_IN_PROGRESS'|'UPDATE_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_COMPLETE'|'UPDATE_ROLLBACK_IN_PROGRESS'|'UPDATE_ROLLBACK_FAILED'|'UPDATE_ROLLBACK_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_ROLLBACK_COMPLETE'|'REVIEW_IN_PROGRESS',
'StackStatusReason': 'string',
'ParentId': 'string',
'RootId': 'string',
'DriftInformation': {
'StackDriftStatus': 'DRIFTED'|'IN_SYNC'|'UNKNOWN'|'NOT_CHECKED',
'LastCheckTimestamp': datetime(2015, 1, 1)
}
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
The output for ListStacks action.
StackSummaries (list) --
A list of StackSummary structures containing information about the specified stacks.
(dict) --
The StackSummary Data Type
StackId (string) --
Unique stack identifier.
StackName (string) --
The name associated with the stack.
TemplateDescription (string) --
The template description of the template used to create the stack.
CreationTime (datetime) --
The time the stack was created.
LastUpdatedTime (datetime) --
The time the stack was last updated. This field will only be returned if the stack has been updated at least once.
DeletionTime (datetime) --
The time the stack was deleted.
StackStatus (string) --
The current status of the stack.
StackStatusReason (string) --
Success/Failure message associated with the stack status.
ParentId (string) --
For nested stacks--stacks created as resources for another stack--the stack ID of the direct parent of this stack. For the first level of nested stacks, the root stack is also the parent stack.
For more information, see Working with Nested Stacks in the AWS CloudFormation User Guide .
RootId (string) --
For nested stacks--stacks created as resources for another stack--the stack ID of the the top-level stack to which the nested stack ultimately belongs.
For more information, see Working with Nested Stacks in the AWS CloudFormation User Guide .
DriftInformation (dict) --
Summarizes information on whether a stack's actual configuration differs, or has drifted , from it's expected configuration, as defined in the stack template and any values specified as template parameters. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
StackDriftStatus (string) --
Status of the stack's actual configuration compared to its expected template configuration.
LastCheckTimestamp (datetime) --
Most recent time when a drift detection operation was initiated on the stack, or any of its individual resources that support drift detection.
NextToken (string) --
If the output exceeds 1 MB in size, a string that identifies the next page of stacks. If no additional page exists, this value is null.
Sets a stack policy for a specified stack.
See also: AWS API Documentation
Request Syntax
response = client.set_stack_policy(
StackName='string',
StackPolicyBody='string',
StackPolicyURL='string'
)
[REQUIRED]
The name or unique stack ID that you want to associate a policy with.
None
Sends a signal to the specified resource with a success or failure status. You can use the SignalResource API in conjunction with a creation policy or update policy. AWS CloudFormation doesn't proceed with a stack creation or update until resources receive the required number of signals or the timeout period is exceeded. The SignalResource API is useful in cases where you want to send signals from anywhere other than an Amazon EC2 instance.
See also: AWS API Documentation
Request Syntax
response = client.signal_resource(
StackName='string',
LogicalResourceId='string',
UniqueId='string',
Status='SUCCESS'|'FAILURE'
)
[REQUIRED]
The stack name or unique stack ID that includes the resource that you want to signal.
[REQUIRED]
The logical ID of the resource that you want to signal. The logical ID is the name of the resource that given in the template.
[REQUIRED]
A unique ID of the signal. When you signal Amazon EC2 instances or Auto Scaling groups, specify the instance ID that you are signaling as the unique ID. If you send multiple signals to a single resource (such as signaling a wait condition), each signal requires a different unique ID.
[REQUIRED]
The status of the signal, which is either success or failure. A failure signal causes AWS CloudFormation to immediately fail the stack creation or update.
None
Stops an in-progress operation on a stack set and its associated stack instances.
See also: AWS API Documentation
Request Syntax
response = client.stop_stack_set_operation(
StackSetName='string',
OperationId='string'
)
[REQUIRED]
The name or unique ID of the stack set that you want to stop the operation for.
[REQUIRED]
The ID of the stack operation.
dict
Response Syntax
{}
Response Structure
Updates a stack as specified in the template. After the call completes successfully, the stack update starts. You can check the status of the stack via the DescribeStacks action.
To get a copy of the template for an existing stack, you can use the GetTemplate action.
For more information about creating an update template, updating a stack, and monitoring the progress of the update, see Updating a Stack .
See also: AWS API Documentation
Request Syntax
response = client.update_stack(
StackName='string',
TemplateBody='string',
TemplateURL='string',
UsePreviousTemplate=True|False,
StackPolicyDuringUpdateBody='string',
StackPolicyDuringUpdateURL='string',
Parameters=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
Capabilities=[
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
ResourceTypes=[
'string',
],
RoleARN='string',
RollbackConfiguration={
'RollbackTriggers': [
{
'Arn': 'string',
'Type': 'string'
},
],
'MonitoringTimeInMinutes': 123
},
StackPolicyBody='string',
StackPolicyURL='string',
NotificationARNs=[
'string',
],
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
ClientRequestToken='string'
)
[REQUIRED]
The name or unique stack ID of the stack to update.
Structure containing the template body with a minimum length of 1 byte and a maximum length of 51,200 bytes. (For more information, go to Template Anatomy in the AWS CloudFormation User Guide.)
Conditional: You must specify only one of the following parameters: TemplateBody , TemplateURL , or set the UsePreviousTemplate to true .
Location of file containing the template body. The URL must point to a template that is located in an Amazon S3 bucket. For more information, go to Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify only one of the following parameters: TemplateBody , TemplateURL , or set the UsePreviousTemplate to true .
Reuse the existing template that is associated with the stack that you are updating.
Conditional: You must specify only one of the following parameters: TemplateBody , TemplateURL , or set the UsePreviousTemplate to true .
Structure containing the temporary overriding stack policy body. You can specify either the StackPolicyDuringUpdateBody or the StackPolicyDuringUpdateURL parameter, but not both.
If you want to update protected resources, specify a temporary overriding stack policy during this update. If you do not specify a stack policy, the current policy that is associated with the stack will be used.
Location of a file containing the temporary overriding stack policy. The URL must point to a policy (max size: 16KB) located in an S3 bucket in the same region as the stack. You can specify either the StackPolicyDuringUpdateBody or the StackPolicyDuringUpdateURL parameter, but not both.
If you want to update protected resources, specify a temporary overriding stack policy during this update. If you do not specify a stack policy, the current policy that is associated with the stack will be used.
A list of Parameter structures that specify input parameters for the stack. For more information, see the Parameter data type.
The Parameter data type.
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
The input value associated with the parameter.
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
In some cases, you must explicity acknowledge that your stack template contains certain capabilities in order for AWS CloudFormation to update the stack.
If your stack template contains these resources, we recommend that you review all permissions associated with them and edit their permissions if necessary.
For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates .
Warning
You should only update stacks directly from a stack template that contains macros if you know what processing the macro performs. Each macro relies on an underlying Lambda service function for processing stack templates. Be aware that the Lambda function owner can update the function operation without AWS CloudFormation being notified.
For more information, see Using AWS CloudFormation Macros to Perform Custom Processing on Templates .
The template resource types that you have permissions to work with for this update stack action, such as AWS::EC2::Instance , AWS::EC2::* , or Custom::MyCustomInstance .
If the list of resource types doesn't include a resource that you're updating, the stack update fails. By default, AWS CloudFormation grants permissions to all resource types. AWS Identity and Access Management (IAM) uses this parameter for AWS CloudFormation-specific condition keys in IAM policies. For more information, see Controlling Access with AWS Identity and Access Management .
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes to update the stack. AWS CloudFormation uses the role's credentials to make calls on your behalf. AWS CloudFormation always uses this role for all future operations on the stack. As long as users have permission to operate on the stack, AWS CloudFormation uses this role even if the users don't have permission to pass it. Ensure that the role grants least privilege.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
The rollback triggers for AWS CloudFormation to monitor during stack creation and updating operations, and for the specified monitoring period afterwards.
The triggers to monitor during stack creation or update actions.
By default, AWS CloudFormation saves the rollback triggers specified for a stack and applies them to any subsequent update operations for the stack, unless you specify otherwise. If you do specify rollback triggers for this parameter, those triggers replace any list of triggers previously specified for the stack. This means:
If a specified trigger is missing, the entire stack operation fails and is rolled back.
A rollback trigger AWS CloudFormation monitors during creation and updating of stacks. If any of the alarms you specify goes to ALARM state during the stack operation or within the specified monitoring period afterwards, CloudFormation rolls back the entire stack operation.
The Amazon Resource Name (ARN) of the rollback trigger.
If a specified trigger is missing, the entire stack operation fails and is rolled back.
The resource type of the rollback trigger. Currently, AWS::CloudWatch::Alarm is the only supported resource type.
The amount of time, in minutes, during which CloudFormation should monitor all the rollback triggers after the stack creation or update operation deploys all necessary resources.
The default is 0 minutes.
If you specify a monitoring period but do not specify any rollback triggers, CloudFormation still waits the specified period of time before cleaning up old resources after update operations. You can use this monitoring period to perform any manual stack validation desired, and manually cancel the stack creation or update (using CancelUpdateStack , for example) as necessary.
If you specify 0 for this parameter, CloudFormation still monitors the specified rollback triggers during stack creation and update operations. Then, for update operations, it begins disposing of old resources immediately once the operation completes.
Structure containing a new stack policy body. You can specify either the StackPolicyBody or the StackPolicyURL parameter, but not both.
You might update the stack policy, for example, in order to protect a new resource that you created during a stack update. If you do not specify a stack policy, the current policy that is associated with the stack is unchanged.
Location of a file containing the updated stack policy. The URL must point to a policy (max size: 16KB) located in an S3 bucket in the same region as the stack. You can specify either the StackPolicyBody or the StackPolicyURL parameter, but not both.
You might update the stack policy, for example, in order to protect a new resource that you created during a stack update. If you do not specify a stack policy, the current policy that is associated with the stack is unchanged.
Amazon Simple Notification Service topic Amazon Resource Names (ARNs) that AWS CloudFormation associates with the stack. Specify an empty list to remove all notification topics.
Key-value pairs to associate with this stack. AWS CloudFormation also propagates these tags to supported resources in the stack. You can specify a maximum number of 50 tags.
If you don't specify this parameter, AWS CloudFormation doesn't modify the stack's tags. If you specify an empty value, AWS CloudFormation removes all associated tags.
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
A unique identifier for this UpdateStack request. Specify this token if you plan to retry requests so that AWS CloudFormation knows that you're not attempting to update a stack with the same name. You might retry UpdateStack requests to ensure that AWS CloudFormation successfully received them.
All events triggered by a given stack operation are assigned the same client request token, which you can use to track operations. For example, if you execute a CreateStack operation with the token token1 , then all the StackEvents generated by that operation will have ClientRequestToken set as token1 .
In the console, stack operations display the client request token on the Events tab. Stack operations that are initiated from the console use the token format Console-StackOperation-ID , which helps you easily identify the stack operation . For example, if you create a stack using the console, each stack event would be assigned the same token in the following format: Console-CreateStack-7f59c3cf-00d2-40c7-b2ff-e75db0987002 .
dict
Response Syntax
{
'StackId': 'string'
}
Response Structure
(dict) --
The output for an UpdateStack action.
StackId (string) --
Unique identifier of the stack.
Examples
This example adds two stack notification topics to the specified stack.
response = client.update_stack(
Capabilities=[
],
NotificationARNs=[
'arn:aws:sns:use-east-1:123456789012:mytopic1',
'arn:aws:sns:us-east-1:123456789012:mytopic2',
],
Parameters=[
],
ResourceTypes=[
],
StackName='MyStack',
Tags=[
],
TemplateURL='https://s3.amazonaws.com/example/updated.template',
UsePreviousTemplate=True,
)
print(response)
Expected Output:
{
'StackId': '',
'ResponseMetadata': {
'...': '...',
},
}
Updates the parameter values for stack instances for the specified accounts, within the specified regions. A stack instance refers to a stack in a specific account and region.
You can only update stack instances in regions and accounts where they already exist; to create additional stack instances, use CreateStackInstances .
During stack set updates, any parameters overridden for a stack instance are not updated, but retain their overridden value.
You can only update the parameter values that are specified in the stack set; to add or delete a parameter itself, use UpdateStackSet to update the stack set template. If you add a parameter to a template, before you can override the parameter value specified in the stack set you must first use UpdateStackSet to update all stack instances with the updated template and parameter value specified in the stack set. Once a stack instance has been updated with the new parameter, you can then override the parameter value using UpdateStackInstances .
See also: AWS API Documentation
Request Syntax
response = client.update_stack_instances(
StackSetName='string',
Accounts=[
'string',
],
Regions=[
'string',
],
ParameterOverrides=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
OperationPreferences={
'RegionOrder': [
'string',
],
'FailureToleranceCount': 123,
'FailureTolerancePercentage': 123,
'MaxConcurrentCount': 123,
'MaxConcurrentPercentage': 123
},
OperationId='string'
)
[REQUIRED]
The name or unique ID of the stack set associated with the stack instances.
[REQUIRED]
The names of one or more AWS accounts for which you want to update parameter values for stack instances. The overridden parameter values will be applied to all stack instances in the specified accounts and regions.
[REQUIRED]
The names of one or more regions in which you want to update parameter values for stack instances. The overridden parameter values will be applied to all stack instances in the specified accounts and regions.
A list of input parameters whose values you want to update for the specified stack instances.
Any overridden parameter values will be applied to all stack instances in the specified accounts and regions. When specifying parameters and their values, be aware of how AWS CloudFormation sets parameter values during stack instance update operations:
During stack set updates, any parameter values overridden for a stack instance are not updated, but retain their overridden value.
You can only override the parameter values that are specified in the stack set; to add or delete a parameter itself, use UpdateStackSet to update the stack set template. If you add a parameter to a template, before you can override the parameter value specified in the stack set you must first use UpdateStackSet to update all stack instances with the updated template and parameter value specified in the stack set. Once a stack instance has been updated with the new parameter, you can then override the parameter value using UpdateStackInstances .
The Parameter data type.
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
The input value associated with the parameter.
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
Preferences for how AWS CloudFormation performs this stack set operation.
The order of the regions in where you want to perform the stack operation.
The number of accounts, per region, for which this operation can fail before AWS CloudFormation stops the operation in that region. If the operation is stopped in a region, AWS CloudFormation doesn't attempt the operation in any subsequent regions.
Conditional: You must specify either FailureToleranceCount or FailureTolerancePercentage (but not both).
The percentage of accounts, per region, for which this stack operation can fail before AWS CloudFormation stops the operation in that region. If the operation is stopped in a region, AWS CloudFormation doesn't attempt the operation in any subsequent regions.
When calculating the number of accounts based on the specified percentage, AWS CloudFormation rounds down to the next whole number.
Conditional: You must specify either FailureToleranceCount or FailureTolerancePercentage , but not both.
The maximum number of accounts in which to perform this operation at one time. This is dependent on the value of FailureToleranceCount —MaxConcurrentCount is at most one more than the FailureToleranceCount .
Note that this setting lets you specify the maximum for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling.
Conditional: You must specify either MaxConcurrentCount or MaxConcurrentPercentage , but not both.
The maximum percentage of accounts in which to perform this operation at one time.
When calculating the number of accounts based on the specified percentage, AWS CloudFormation rounds down to the next whole number. This is true except in cases where rounding down would result is zero. In this case, CloudFormation sets the number as one instead.
Note that this setting lets you specify the maximum for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling.
Conditional: You must specify either MaxConcurrentCount or MaxConcurrentPercentage , but not both.
The unique identifier for this stack set operation.
The operation ID also functions as an idempotency token, to ensure that AWS CloudFormation performs the stack set operation only once, even if you retry the request multiple times. You might retry stack set operation requests to ensure that AWS CloudFormation successfully received them.
If you don't specify an operation ID, the SDK generates one automatically.
This field is autopopulated if not provided.
dict
Response Syntax
{
'OperationId': 'string'
}
Response Structure
(dict) --
OperationId (string) --
The unique identifier for this stack set operation.
Updates the stack set, and associated stack instances in the specified accounts and regions.
Even if the stack set operation created by updating the stack set fails (completely or partially, below or above a specified failure tolerance), the stack set is updated with your changes. Subsequent CreateStackInstances calls on the specified stack set use the updated stack set.
See also: AWS API Documentation
Request Syntax
response = client.update_stack_set(
StackSetName='string',
Description='string',
TemplateBody='string',
TemplateURL='string',
UsePreviousTemplate=True|False,
Parameters=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
Capabilities=[
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
OperationPreferences={
'RegionOrder': [
'string',
],
'FailureToleranceCount': 123,
'FailureTolerancePercentage': 123,
'MaxConcurrentCount': 123,
'MaxConcurrentPercentage': 123
},
AdministrationRoleARN='string',
ExecutionRoleName='string',
OperationId='string',
Accounts=[
'string',
],
Regions=[
'string',
]
)
[REQUIRED]
The name or unique ID of the stack set that you want to update.
The structure that contains the template body, with a minimum length of 1 byte and a maximum length of 51,200 bytes. For more information, see Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify only one of the following parameters: TemplateBody or TemplateURL —or set UsePreviousTemplate to true.
The location of the file that contains the template body. The URL must point to a template (maximum size: 460,800 bytes) that is located in an Amazon S3 bucket. For more information, see Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify only one of the following parameters: TemplateBody or TemplateURL —or set UsePreviousTemplate to true.
Use the existing template that's associated with the stack set that you're updating.
Conditional: You must specify only one of the following parameters: TemplateBody or TemplateURL —or set UsePreviousTemplate to true.
A list of input parameters for the stack set template.
The Parameter data type.
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
The input value associated with the parameter.
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
In some cases, you must explicity acknowledge that your stack template contains certain capabilities in order for AWS CloudFormation to update the stack set and its associated stack instances.
If your stack template contains these resources, we recommend that you review all permissions associated with them and edit their permissions if necessary.
For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates .
Warning
Stack sets do not currently support macros in stack templates. (This includes the AWS::Include and AWS::Serverless transforms, which are macros hosted by AWS CloudFormation.) Even if you specify this capability, if you include a macro in your template the stack set operation will fail.
The key-value pairs to associate with this stack set and the stacks created from it. AWS CloudFormation also propagates these tags to supported resources that are created in the stacks. You can specify a maximum number of 50 tags.
If you specify tags for this parameter, those tags replace any list of tags that are currently associated with this stack set. This means:
If you specify new tags as part of an UpdateStackSet action, AWS CloudFormation checks to see if you have the required IAM permission to tag resources. If you omit tags that are currently associated with the stack set from the list of tags you specify, AWS CloudFormation assumes that you want to remove those tags from the stack set, and checks to see if you have permission to untag resources. If you don't have the necessary permission(s), the entire UpdateStackSet action fails with an access denied error, and the stack set is not updated.
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
Preferences for how AWS CloudFormation performs this stack set operation.
The order of the regions in where you want to perform the stack operation.
The number of accounts, per region, for which this operation can fail before AWS CloudFormation stops the operation in that region. If the operation is stopped in a region, AWS CloudFormation doesn't attempt the operation in any subsequent regions.
Conditional: You must specify either FailureToleranceCount or FailureTolerancePercentage (but not both).
The percentage of accounts, per region, for which this stack operation can fail before AWS CloudFormation stops the operation in that region. If the operation is stopped in a region, AWS CloudFormation doesn't attempt the operation in any subsequent regions.
When calculating the number of accounts based on the specified percentage, AWS CloudFormation rounds down to the next whole number.
Conditional: You must specify either FailureToleranceCount or FailureTolerancePercentage , but not both.
The maximum number of accounts in which to perform this operation at one time. This is dependent on the value of FailureToleranceCount —MaxConcurrentCount is at most one more than the FailureToleranceCount .
Note that this setting lets you specify the maximum for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling.
Conditional: You must specify either MaxConcurrentCount or MaxConcurrentPercentage , but not both.
The maximum percentage of accounts in which to perform this operation at one time.
When calculating the number of accounts based on the specified percentage, AWS CloudFormation rounds down to the next whole number. This is true except in cases where rounding down would result is zero. In this case, CloudFormation sets the number as one instead.
Note that this setting lets you specify the maximum for operations. For large deployments, under certain circumstances the actual number of accounts acted upon concurrently may be lower due to service throttling.
Conditional: You must specify either MaxConcurrentCount or MaxConcurrentPercentage , but not both.
The Amazon Resource Number (ARN) of the IAM role to use to update this stack set.
Specify an IAM role only if you are using customized administrator roles to control which users or groups can manage specific stack sets within the same administrator account. For more information, see Granting Permissions for Stack Set Operations in the AWS CloudFormation User Guide .
If you specified a customized administrator role when you created the stack set, you must specify a customized administrator role, even if it is the same customized administrator role used with this stack set previously.
The name of the IAM execution role to use to update the stack set. If you do not specify an execution role, AWS CloudFormation uses the AWSCloudFormationStackSetExecutionRole role for the stack set operation.
Specify an IAM role only if you are using customized execution roles to control which stack resources users and groups can include in their stack sets.
If you specify a customized execution role, AWS CloudFormation uses that role to update the stack. If you do not specify a customized execution role, AWS CloudFormation performs the update using the role previously associated with the stack set, so long as you have permissions to perform operations on the stack set.
The unique ID for this stack set operation.
The operation ID also functions as an idempotency token, to ensure that AWS CloudFormation performs the stack set operation only once, even if you retry the request multiple times. You might retry stack set operation requests to ensure that AWS CloudFormation successfully received them.
If you don't specify an operation ID, AWS CloudFormation generates one automatically.
Repeating this stack set operation with a new operation ID retries all stack instances whose status is OUTDATED .
This field is autopopulated if not provided.
The accounts in which to update associated stack instances. If you specify accounts, you must also specify the regions in which to update stack set instances.
To update all the stack instances associated with this stack set, do not specify the Accounts or Regions properties.
If the stack set update includes changes to the template (that is, if the TemplateBody or TemplateURL properties are specified), or the Parameters property, AWS CloudFormation marks all stack instances with a status of OUTDATED prior to updating the stack instances in the specified accounts and regions. If the stack set update does not include changes to the template or parameters, AWS CloudFormation updates the stack instances in the specified accounts and regions, while leaving all other stack instances with their existing stack instance status.
The regions in which to update associated stack instances. If you specify regions, you must also specify accounts in which to update stack set instances.
To update all the stack instances associated with this stack set, do not specify the Accounts or Regions properties.
If the stack set update includes changes to the template (that is, if the TemplateBody or TemplateURL properties are specified), or the Parameters property, AWS CloudFormation marks all stack instances with a status of OUTDATED prior to updating the stack instances in the specified accounts and regions. If the stack set update does not include changes to the template or parameters, AWS CloudFormation updates the stack instances in the specified accounts and regions, while leaving all other stack instances with their existing stack instance status.
dict
Response Syntax
{
'OperationId': 'string'
}
Response Structure
(dict) --
OperationId (string) --
The unique ID for this stack set operation.
Updates termination protection for the specified stack. If a user attempts to delete a stack with termination protection enabled, the operation fails and the stack remains unchanged. For more information, see Protecting a Stack From Being Deleted in the AWS CloudFormation User Guide .
For nested stacks , termination protection is set on the root stack and cannot be changed directly on the nested stack.
See also: AWS API Documentation
Request Syntax
response = client.update_termination_protection(
EnableTerminationProtection=True|False,
StackName='string'
)
[REQUIRED]
Whether to enable termination protection on the specified stack.
[REQUIRED]
The name or unique ID of the stack for which you want to set termination protection.
dict
Response Syntax
{
'StackId': 'string'
}
Response Structure
(dict) --
StackId (string) --
The unique ID of the stack.
Validates a specified template. AWS CloudFormation first checks if the template is valid JSON. If it isn't, AWS CloudFormation checks if the template is valid YAML. If both these checks fail, AWS CloudFormation returns a template validation error.
See also: AWS API Documentation
Request Syntax
response = client.validate_template(
TemplateBody='string',
TemplateURL='string'
)
Structure containing the template body with a minimum length of 1 byte and a maximum length of 51,200 bytes. For more information, go to Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must pass TemplateURL or TemplateBody . If both are passed, only TemplateBody is used.
Location of file containing the template body. The URL must point to a template (max size: 460,800 bytes) that is located in an Amazon S3 bucket. For more information, go to Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must pass TemplateURL or TemplateBody . If both are passed, only TemplateBody is used.
dict
Response Syntax
{
'Parameters': [
{
'ParameterKey': 'string',
'DefaultValue': 'string',
'NoEcho': True|False,
'Description': 'string'
},
],
'Description': 'string',
'Capabilities': [
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
'CapabilitiesReason': 'string',
'DeclaredTransforms': [
'string',
]
}
Response Structure
(dict) --
The output for ValidateTemplate action.
Parameters (list) --
A list of TemplateParameter structures.
(dict) --
The TemplateParameter data type.
ParameterKey (string) --
The name associated with the parameter.
DefaultValue (string) --
The default value associated with the parameter.
NoEcho (boolean) --
Flag indicating whether the parameter should be displayed as plain text in logs and UIs.
Description (string) --
User defined description associated with the parameter.
Description (string) --
The description found within the template.
Capabilities (list) --
The capabilities found within the template. If your template contains IAM resources, you must specify the CAPABILITY_IAM or CAPABILITY_NAMED_IAM value for this parameter when you use the CreateStack or UpdateStack actions with your template; otherwise, those actions return an InsufficientCapabilities error.
For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates .
CapabilitiesReason (string) --
The list of resources that generated the values in the Capabilities response element.
DeclaredTransforms (list) --
A list of the transforms that are declared in the template.
Examples
This example validates the specified template.
response = client.validate_template(
TemplateBody='MyTemplate.json',
)
print(response)
Expected Output:
{
'Capabilities': [
],
'CapabilitiesReason': '',
'Description': 'AWS CloudFormation Example Template S3_Bucket: An example template that shows how to create a publicly-accessible S3 bucket. IMPORTANT: This template creates an S3 bucket. You will be billed for the AWS resources used if you create a stack from this template.',
'Parameters': [
],
'ResponseMetadata': {
'...': '...',
},
}
The available paginators are:
paginator = client.get_paginator('describe_account_limits')
Creates an iterator that will paginate through responses from CloudFormation.Client.describe_account_limits().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
{
'AccountLimits': [
{
'Name': 'string',
'Value': 123
},
],
}
Response Structure
The output for the DescribeAccountLimits action.
An account limit structure that contain a list of AWS CloudFormation account limits and their values.
The AccountLimit data type. For more information about account limits, see AWS CloudFormation Limits in the AWS CloudFormation User Guide .
The name of the account limit.
The value that is associated with the account limit name.
paginator = client.get_paginator('describe_change_set')
Creates an iterator that will paginate through responses from CloudFormation.Client.describe_change_set().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ChangeSetName='string',
StackName='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The name or Amazon Resource Name (ARN) of the change set that you want to describe.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ChangeSetName': 'string',
'ChangeSetId': 'string',
'StackId': 'string',
'StackName': 'string',
'Description': 'string',
'Parameters': [
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
'CreationTime': datetime(2015, 1, 1),
'ExecutionStatus': 'UNAVAILABLE'|'AVAILABLE'|'EXECUTE_IN_PROGRESS'|'EXECUTE_COMPLETE'|'EXECUTE_FAILED'|'OBSOLETE',
'Status': 'CREATE_PENDING'|'CREATE_IN_PROGRESS'|'CREATE_COMPLETE'|'DELETE_COMPLETE'|'FAILED',
'StatusReason': 'string',
'NotificationARNs': [
'string',
],
'RollbackConfiguration': {
'RollbackTriggers': [
{
'Arn': 'string',
'Type': 'string'
},
],
'MonitoringTimeInMinutes': 123
},
'Capabilities': [
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'Changes': [
{
'Type': 'Resource',
'ResourceChange': {
'Action': 'Add'|'Modify'|'Remove',
'LogicalResourceId': 'string',
'PhysicalResourceId': 'string',
'ResourceType': 'string',
'Replacement': 'True'|'False'|'Conditional',
'Scope': [
'Properties'|'Metadata'|'CreationPolicy'|'UpdatePolicy'|'DeletionPolicy'|'Tags',
],
'Details': [
{
'Target': {
'Attribute': 'Properties'|'Metadata'|'CreationPolicy'|'UpdatePolicy'|'DeletionPolicy'|'Tags',
'Name': 'string',
'RequiresRecreation': 'Never'|'Conditionally'|'Always'
},
'Evaluation': 'Static'|'Dynamic',
'ChangeSource': 'ResourceReference'|'ParameterReference'|'ResourceAttribute'|'DirectModification'|'Automatic',
'CausingEntity': 'string'
},
]
}
},
],
}
Response Structure
(dict) --
The output for the DescribeChangeSet action.
ChangeSetName (string) --
The name of the change set.
ChangeSetId (string) --
The ARN of the change set.
StackId (string) --
The ARN of the stack that is associated with the change set.
StackName (string) --
The name of the stack that is associated with the change set.
Description (string) --
Information about the change set.
Parameters (list) --
A list of Parameter structures that describes the input parameters and their values used to create the change set. For more information, see the Parameter data type.
(dict) --
The Parameter data type.
ParameterKey (string) --
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
ParameterValue (string) --
The input value associated with the parameter.
UsePreviousValue (boolean) --
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
ResolvedValue (string) --
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
CreationTime (datetime) --
The start time when the change set was created, in UTC.
ExecutionStatus (string) --
If the change set execution status is AVAILABLE , you can execute the change set. If you can’t execute the change set, the status indicates why. For example, a change set might be in an UNAVAILABLE state because AWS CloudFormation is still creating it or in an OBSOLETE state because the stack was already updated.
Status (string) --
The current status of the change set, such as CREATE_IN_PROGRESS , CREATE_COMPLETE , or FAILED .
StatusReason (string) --
A description of the change set's status. For example, if your attempt to create a change set failed, AWS CloudFormation shows the error message.
NotificationARNs (list) --
The ARNs of the Amazon Simple Notification Service (Amazon SNS) topics that will be associated with the stack if you execute the change set.
RollbackConfiguration (dict) --
The rollback triggers for AWS CloudFormation to monitor during stack creation and updating operations, and for the specified monitoring period afterwards.
RollbackTriggers (list) --
The triggers to monitor during stack creation or update actions.
By default, AWS CloudFormation saves the rollback triggers specified for a stack and applies them to any subsequent update operations for the stack, unless you specify otherwise. If you do specify rollback triggers for this parameter, those triggers replace any list of triggers previously specified for the stack. This means:
If a specified trigger is missing, the entire stack operation fails and is rolled back.
(dict) --
A rollback trigger AWS CloudFormation monitors during creation and updating of stacks. If any of the alarms you specify goes to ALARM state during the stack operation or within the specified monitoring period afterwards, CloudFormation rolls back the entire stack operation.
Arn (string) --
The Amazon Resource Name (ARN) of the rollback trigger.
If a specified trigger is missing, the entire stack operation fails and is rolled back.
Type (string) --
The resource type of the rollback trigger. Currently, AWS::CloudWatch::Alarm is the only supported resource type.
MonitoringTimeInMinutes (integer) --
The amount of time, in minutes, during which CloudFormation should monitor all the rollback triggers after the stack creation or update operation deploys all necessary resources.
The default is 0 minutes.
If you specify a monitoring period but do not specify any rollback triggers, CloudFormation still waits the specified period of time before cleaning up old resources after update operations. You can use this monitoring period to perform any manual stack validation desired, and manually cancel the stack creation or update (using CancelUpdateStack , for example) as necessary.
If you specify 0 for this parameter, CloudFormation still monitors the specified rollback triggers during stack creation and update operations. Then, for update operations, it begins disposing of old resources immediately once the operation completes.
Capabilities (list) --
If you execute the change set, the list of capabilities that were explicitly acknowledged when the change set was created.
Tags (list) --
If you execute the change set, the tags that will be associated with the stack.
(dict) --
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Key (string) --
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Value (string) --
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
Changes (list) --
A list of Change structures that describes the resources AWS CloudFormation changes if you execute the change set.
(dict) --
The Change structure describes the changes AWS CloudFormation will perform if you execute the change set.
Type (string) --
The type of entity that AWS CloudFormation changes. Currently, the only entity type is Resource .
ResourceChange (dict) --
A ResourceChange structure that describes the resource and action that AWS CloudFormation will perform.
Action (string) --
The action that AWS CloudFormation takes on the resource, such as Add (adds a new resource), Modify (changes a resource), or Remove (deletes a resource).
LogicalResourceId (string) --
The resource's logical ID, which is defined in the stack's template.
PhysicalResourceId (string) --
The resource's physical ID (resource name). Resources that you are adding don't have physical IDs because they haven't been created.
ResourceType (string) --
The type of AWS CloudFormation resource, such as AWS::S3::Bucket .
Replacement (string) --
For the Modify action, indicates whether AWS CloudFormation will replace the resource by creating a new one and deleting the old one. This value depends on the value of the RequiresRecreation property in the ResourceTargetDefinition structure. For example, if the RequiresRecreation field is Always and the Evaluation field is Static , Replacement is True . If the RequiresRecreation field is Always and the Evaluation field is Dynamic , Replacement is Conditionally .
If you have multiple changes with different RequiresRecreation values, the Replacement value depends on the change with the most impact. A RequiresRecreation value of Always has the most impact, followed by Conditionally , and then Never .
Scope (list) --
For the Modify action, indicates which resource attribute is triggering this update, such as a change in the resource attribute's Metadata , Properties , or Tags .
Details (list) --
For the Modify action, a list of ResourceChangeDetail structures that describes the changes that AWS CloudFormation will make to the resource.
(dict) --
For a resource with Modify as the action, the ResourceChange structure describes the changes AWS CloudFormation will make to that resource.
Target (dict) --
A ResourceTargetDefinition structure that describes the field that AWS CloudFormation will change and whether the resource will be recreated.
Attribute (string) --
Indicates which resource attribute is triggering this update, such as a change in the resource attribute's Metadata , Properties , or Tags .
Name (string) --
If the Attribute value is Properties , the name of the property. For all other attributes, the value is null.
RequiresRecreation (string) --
If the Attribute value is Properties , indicates whether a change to this property causes the resource to be recreated. The value can be Never , Always , or Conditionally . To determine the conditions for a Conditionally recreation, see the update behavior for that property in the AWS CloudFormation User Guide.
Evaluation (string) --
Indicates whether AWS CloudFormation can determine the target value, and whether the target value will change before you execute a change set.
For Static evaluations, AWS CloudFormation can determine that the target value will change, and its value. For example, if you directly modify the InstanceType property of an EC2 instance, AWS CloudFormation knows that this property value will change, and its value, so this is a Static evaluation.
For Dynamic evaluations, cannot determine the target value because it depends on the result of an intrinsic function, such as a Ref or Fn::GetAtt intrinsic function, when the stack is updated. For example, if your template includes a reference to a resource that is conditionally recreated, the value of the reference (the physical ID of the resource) might change, depending on if the resource is recreated. If the resource is recreated, it will have a new physical ID, so all references to that resource will also be updated.
ChangeSource (string) --
The group to which the CausingEntity value belongs. There are five entity groups:
CausingEntity (string) --
The identity of the entity that triggered this change. This entity is a member of the group that is specified by the ChangeSource field. For example, if you modified the value of the KeyPairName parameter, the CausingEntity is the name of the parameter (KeyPairName ).
If the ChangeSource value is DirectModification , no value is given for CausingEntity .
paginator = client.get_paginator('describe_stack_events')
Creates an iterator that will paginate through responses from CloudFormation.Client.describe_stack_events().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
StackName='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'StackEvents': [
{
'StackId': 'string',
'EventId': 'string',
'StackName': 'string',
'LogicalResourceId': 'string',
'PhysicalResourceId': 'string',
'ResourceType': 'string',
'Timestamp': datetime(2015, 1, 1),
'ResourceStatus': 'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'DELETE_SKIPPED'|'UPDATE_IN_PROGRESS'|'UPDATE_FAILED'|'UPDATE_COMPLETE',
'ResourceStatusReason': 'string',
'ResourceProperties': 'string',
'ClientRequestToken': 'string'
},
],
}
Response Structure
(dict) --
The output for a DescribeStackEvents action.
StackEvents (list) --
A list of StackEvents structures.
(dict) --
The StackEvent data type.
StackId (string) --
The unique ID name of the instance of the stack.
EventId (string) --
The unique ID of this event.
StackName (string) --
The name associated with a stack.
LogicalResourceId (string) --
The logical name of the resource specified in the template.
PhysicalResourceId (string) --
The name or unique identifier associated with the physical instance of the resource.
ResourceType (string) --
Type of resource. (For more information, go to AWS Resource Types Reference in the AWS CloudFormation User Guide.)
Timestamp (datetime) --
Time the status was updated.
ResourceStatus (string) --
Current status of the resource.
ResourceStatusReason (string) --
Success/failure message associated with the resource.
ResourceProperties (string) --
BLOB of the properties used to create the resource.
ClientRequestToken (string) --
The token passed to the operation that generated this event.
All events triggered by a given stack operation are assigned the same client request token, which you can use to track operations. For example, if you execute a CreateStack operation with the token token1 , then all the StackEvents generated by that operation will have ClientRequestToken set as token1 .
In the console, stack operations display the client request token on the Events tab. Stack operations that are initiated from the console use the token format Console-StackOperation-ID , which helps you easily identify the stack operation . For example, if you create a stack using the console, each stack event would be assigned the same token in the following format: Console-CreateStack-7f59c3cf-00d2-40c7-b2ff-e75db0987002 .
paginator = client.get_paginator('describe_stacks')
Creates an iterator that will paginate through responses from CloudFormation.Client.describe_stacks().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
StackName='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Stacks': [
{
'StackId': 'string',
'StackName': 'string',
'ChangeSetId': 'string',
'Description': 'string',
'Parameters': [
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
'CreationTime': datetime(2015, 1, 1),
'DeletionTime': datetime(2015, 1, 1),
'LastUpdatedTime': datetime(2015, 1, 1),
'RollbackConfiguration': {
'RollbackTriggers': [
{
'Arn': 'string',
'Type': 'string'
},
],
'MonitoringTimeInMinutes': 123
},
'StackStatus': 'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'ROLLBACK_IN_PROGRESS'|'ROLLBACK_FAILED'|'ROLLBACK_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'UPDATE_IN_PROGRESS'|'UPDATE_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_COMPLETE'|'UPDATE_ROLLBACK_IN_PROGRESS'|'UPDATE_ROLLBACK_FAILED'|'UPDATE_ROLLBACK_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_ROLLBACK_COMPLETE'|'REVIEW_IN_PROGRESS',
'StackStatusReason': 'string',
'DisableRollback': True|False,
'NotificationARNs': [
'string',
],
'TimeoutInMinutes': 123,
'Capabilities': [
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
'Outputs': [
{
'OutputKey': 'string',
'OutputValue': 'string',
'Description': 'string',
'ExportName': 'string'
},
],
'RoleARN': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'EnableTerminationProtection': True|False,
'ParentId': 'string',
'RootId': 'string',
'DriftInformation': {
'StackDriftStatus': 'DRIFTED'|'IN_SYNC'|'UNKNOWN'|'NOT_CHECKED',
'LastCheckTimestamp': datetime(2015, 1, 1)
}
},
],
}
Response Structure
(dict) --
The output for a DescribeStacks action.
Stacks (list) --
A list of stack structures.
(dict) --
The Stack data type.
StackId (string) --
Unique identifier of the stack.
StackName (string) --
The name associated with the stack.
ChangeSetId (string) --
The unique ID of the change set.
Description (string) --
A user-defined description associated with the stack.
Parameters (list) --
A list of Parameter structures.
(dict) --
The Parameter data type.
ParameterKey (string) --
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
ParameterValue (string) --
The input value associated with the parameter.
UsePreviousValue (boolean) --
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
ResolvedValue (string) --
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
CreationTime (datetime) --
The time at which the stack was created.
DeletionTime (datetime) --
The time the stack was deleted.
LastUpdatedTime (datetime) --
The time the stack was last updated. This field will only be returned if the stack has been updated at least once.
RollbackConfiguration (dict) --
The rollback triggers for AWS CloudFormation to monitor during stack creation and updating operations, and for the specified monitoring period afterwards.
RollbackTriggers (list) --
The triggers to monitor during stack creation or update actions.
By default, AWS CloudFormation saves the rollback triggers specified for a stack and applies them to any subsequent update operations for the stack, unless you specify otherwise. If you do specify rollback triggers for this parameter, those triggers replace any list of triggers previously specified for the stack. This means:
If a specified trigger is missing, the entire stack operation fails and is rolled back.
(dict) --
A rollback trigger AWS CloudFormation monitors during creation and updating of stacks. If any of the alarms you specify goes to ALARM state during the stack operation or within the specified monitoring period afterwards, CloudFormation rolls back the entire stack operation.
Arn (string) --
The Amazon Resource Name (ARN) of the rollback trigger.
If a specified trigger is missing, the entire stack operation fails and is rolled back.
Type (string) --
The resource type of the rollback trigger. Currently, AWS::CloudWatch::Alarm is the only supported resource type.
MonitoringTimeInMinutes (integer) --
The amount of time, in minutes, during which CloudFormation should monitor all the rollback triggers after the stack creation or update operation deploys all necessary resources.
The default is 0 minutes.
If you specify a monitoring period but do not specify any rollback triggers, CloudFormation still waits the specified period of time before cleaning up old resources after update operations. You can use this monitoring period to perform any manual stack validation desired, and manually cancel the stack creation or update (using CancelUpdateStack , for example) as necessary.
If you specify 0 for this parameter, CloudFormation still monitors the specified rollback triggers during stack creation and update operations. Then, for update operations, it begins disposing of old resources immediately once the operation completes.
StackStatus (string) --
Current status of the stack.
StackStatusReason (string) --
Success/failure message associated with the stack status.
DisableRollback (boolean) --
Boolean to enable or disable rollback on stack creation failures:
NotificationARNs (list) --
SNS topic ARNs to which stack related events are published.
TimeoutInMinutes (integer) --
The amount of time within which stack creation should complete.
Capabilities (list) --
The capabilities allowed in the stack.
Outputs (list) --
A list of output structures.
(dict) --
The Output data type.
OutputKey (string) --
The key associated with the output.
OutputValue (string) --
The value associated with the output.
Description (string) --
User defined description associated with the output.
ExportName (string) --
The name of the export associated with the output.
RoleARN (string) --
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that is associated with the stack. During a stack operation, AWS CloudFormation uses this role's credentials to make calls on your behalf.
Tags (list) --
A list of Tag s that specify information about the stack.
(dict) --
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Key (string) --
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Value (string) --
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
EnableTerminationProtection (boolean) --
Whether termination protection is enabled for the stack.
For nested stacks , termination protection is set on the root stack and cannot be changed directly on the nested stack. For more information, see Protecting a Stack From Being Deleted in the AWS CloudFormation User Guide .
ParentId (string) --
For nested stacks--stacks created as resources for another stack--the stack ID of the direct parent of this stack. For the first level of nested stacks, the root stack is also the parent stack.
For more information, see Working with Nested Stacks in the AWS CloudFormation User Guide .
RootId (string) --
For nested stacks--stacks created as resources for another stack--the stack ID of the the top-level stack to which the nested stack ultimately belongs.
For more information, see Working with Nested Stacks in the AWS CloudFormation User Guide .
DriftInformation (dict) --
Information on whether a stack's actual configuration differs, or has drifted , from it's expected configuration, as defined in the stack template and any values specified as template parameters. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
StackDriftStatus (string) --
Status of the stack's actual configuration compared to its expected template configuration.
LastCheckTimestamp (datetime) --
Most recent time when a drift detection operation was initiated on the stack, or any of its individual resources that support drift detection.
paginator = client.get_paginator('list_change_sets')
Creates an iterator that will paginate through responses from CloudFormation.Client.list_change_sets().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
StackName='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The name or the Amazon Resource Name (ARN) of the stack for which you want to list change sets.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Summaries': [
{
'StackId': 'string',
'StackName': 'string',
'ChangeSetId': 'string',
'ChangeSetName': 'string',
'ExecutionStatus': 'UNAVAILABLE'|'AVAILABLE'|'EXECUTE_IN_PROGRESS'|'EXECUTE_COMPLETE'|'EXECUTE_FAILED'|'OBSOLETE',
'Status': 'CREATE_PENDING'|'CREATE_IN_PROGRESS'|'CREATE_COMPLETE'|'DELETE_COMPLETE'|'FAILED',
'StatusReason': 'string',
'CreationTime': datetime(2015, 1, 1),
'Description': 'string'
},
],
}
Response Structure
(dict) --
The output for the ListChangeSets action.
Summaries (list) --
A list of ChangeSetSummary structures that provides the ID and status of each change set for the specified stack.
(dict) --
The ChangeSetSummary structure describes a change set, its status, and the stack with which it's associated.
StackId (string) --
The ID of the stack with which the change set is associated.
StackName (string) --
The name of the stack with which the change set is associated.
ChangeSetId (string) --
The ID of the change set.
ChangeSetName (string) --
The name of the change set.
ExecutionStatus (string) --
If the change set execution status is AVAILABLE , you can execute the change set. If you can’t execute the change set, the status indicates why. For example, a change set might be in an UNAVAILABLE state because AWS CloudFormation is still creating it or in an OBSOLETE state because the stack was already updated.
Status (string) --
The state of the change set, such as CREATE_IN_PROGRESS , CREATE_COMPLETE , or FAILED .
StatusReason (string) --
A description of the change set's status. For example, if your change set is in the FAILED state, AWS CloudFormation shows the error message.
CreationTime (datetime) --
The start time when the change set was created, in UTC.
Description (string) --
Descriptive information about the change set.
paginator = client.get_paginator('list_exports')
Creates an iterator that will paginate through responses from CloudFormation.Client.list_exports().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
{
'Exports': [
{
'ExportingStackId': 'string',
'Name': 'string',
'Value': 'string'
},
],
}
Response Structure
The output for the ListExports action.
The Export structure describes the exported output values for a stack.
The stack that contains the exported output name and value.
The name of exported output value. Use this name and the Fn::ImportValue function to import the associated value into other stacks. The name is defined in the Export field in the associated stack's Outputs section.
The value of the exported output, such as a resource physical ID. This value is defined in the Export field in the associated stack's Outputs section.
paginator = client.get_paginator('list_imports')
Creates an iterator that will paginate through responses from CloudFormation.Client.list_imports().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ExportName='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The name of the exported output value. AWS CloudFormation returns the stack names that are importing this value.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Imports': [
'string',
],
}
Response Structure
(dict) --
Imports (list) --
A list of stack names that are importing the specified exported output value.
paginator = client.get_paginator('list_stack_instances')
Creates an iterator that will paginate through responses from CloudFormation.Client.list_stack_instances().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
StackSetName='string',
StackInstanceAccount='string',
StackInstanceRegion='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The name or unique ID of the stack set that you want to list stack instances for.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Summaries': [
{
'StackSetId': 'string',
'Region': 'string',
'Account': 'string',
'StackId': 'string',
'Status': 'CURRENT'|'OUTDATED'|'INOPERABLE',
'StatusReason': 'string'
},
],
}
Response Structure
(dict) --
Summaries (list) --
A list of StackInstanceSummary structures that contain information about the specified stack instances.
(dict) --
The structure that contains summary information about a stack instance.
StackSetId (string) --
The name or unique ID of the stack set that the stack instance is associated with.
Region (string) --
The name of the AWS region that the stack instance is associated with.
Account (string) --
The name of the AWS account that the stack instance is associated with.
StackId (string) --
The ID of the stack instance.
Status (string) --
The status of the stack instance, in terms of its synchronization with its associated stack set.
StatusReason (string) --
The explanation for the specific status code assigned to this stack instance.
paginator = client.get_paginator('list_stack_resources')
Creates an iterator that will paginate through responses from CloudFormation.Client.list_stack_resources().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
StackName='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'StackResourceSummaries': [
{
'LogicalResourceId': 'string',
'PhysicalResourceId': 'string',
'ResourceType': 'string',
'LastUpdatedTimestamp': datetime(2015, 1, 1),
'ResourceStatus': 'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'DELETE_SKIPPED'|'UPDATE_IN_PROGRESS'|'UPDATE_FAILED'|'UPDATE_COMPLETE',
'ResourceStatusReason': 'string',
'DriftInformation': {
'StackResourceDriftStatus': 'IN_SYNC'|'MODIFIED'|'DELETED'|'NOT_CHECKED',
'LastCheckTimestamp': datetime(2015, 1, 1)
}
},
],
}
Response Structure
(dict) --
The output for a ListStackResources action.
StackResourceSummaries (list) --
A list of StackResourceSummary structures.
(dict) --
Contains high-level information about the specified stack resource.
LogicalResourceId (string) --
The logical name of the resource specified in the template.
PhysicalResourceId (string) --
The name or unique identifier that corresponds to a physical instance ID of the resource.
ResourceType (string) --
Type of resource. (For more information, go to AWS Resource Types Reference in the AWS CloudFormation User Guide.)
LastUpdatedTimestamp (datetime) --
Time the status was updated.
ResourceStatus (string) --
Current status of the resource.
ResourceStatusReason (string) --
Success/failure message associated with the resource.
DriftInformation (dict) --
Information about whether the resource's actual configuration differs, or has drifted , from its expected configuration, as defined in the stack template and any values specified as template parameters. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
StackResourceDriftStatus (string) --
Status of the resource's actual configuration compared to its expected configuration
LastCheckTimestamp (datetime) --
When AWS CloudFormation last checked if the resource had drifted from its expected configuration.
paginator = client.get_paginator('list_stack_set_operation_results')
Creates an iterator that will paginate through responses from CloudFormation.Client.list_stack_set_operation_results().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
StackSetName='string',
OperationId='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The name or unique ID of the stack set that you want to get operation results for.
[REQUIRED]
The ID of the stack set operation.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Summaries': [
{
'Account': 'string',
'Region': 'string',
'Status': 'PENDING'|'RUNNING'|'SUCCEEDED'|'FAILED'|'CANCELLED',
'StatusReason': 'string',
'AccountGateResult': {
'Status': 'SUCCEEDED'|'FAILED'|'SKIPPED',
'StatusReason': 'string'
}
},
],
}
Response Structure
(dict) --
Summaries (list) --
A list of StackSetOperationResultSummary structures that contain information about the specified operation results, for accounts and regions that are included in the operation.
(dict) --
The structure that contains information about a specified operation's results for a given account in a given region.
Account (string) --
The name of the AWS account for this operation result.
Region (string) --
The name of the AWS region for this operation result.
Status (string) --
The result status of the stack set operation for the given account in the given region.
StatusReason (string) --
The reason for the assigned result status.
AccountGateResult (dict) --
The results of the account gate function AWS CloudFormation invokes, if present, before proceeding with stack set operations in an account
Status (string) --
The status of the account gate function.
StatusReason (string) --
The reason for the account gate status assigned to this account and region for the stack set operation.
paginator = client.get_paginator('list_stack_set_operations')
Creates an iterator that will paginate through responses from CloudFormation.Client.list_stack_set_operations().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
StackSetName='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The name or unique ID of the stack set that you want to get operation summaries for.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Summaries': [
{
'OperationId': 'string',
'Action': 'CREATE'|'UPDATE'|'DELETE',
'Status': 'RUNNING'|'SUCCEEDED'|'FAILED'|'STOPPING'|'STOPPED',
'CreationTimestamp': datetime(2015, 1, 1),
'EndTimestamp': datetime(2015, 1, 1)
},
],
}
Response Structure
(dict) --
Summaries (list) --
A list of StackSetOperationSummary structures that contain summary information about operations for the specified stack set.
(dict) --
The structures that contain summary information about the specified operation.
OperationId (string) --
The unique ID of the stack set operation.
Action (string) --
The type of operation: CREATE , UPDATE , or DELETE . Create and delete operations affect only the specified stack instances that are associated with the specified stack set. Update operations affect both the stack set itself as well as all associated stack set instances.
Status (string) --
The overall status of the operation.
CreationTimestamp (datetime) --
The time at which the operation was initiated. Note that the creation times for the stack set operation might differ from the creation time of the individual stacks themselves. This is because AWS CloudFormation needs to perform preparatory work for the operation, such as dispatching the work to the requested regions, before actually creating the first stacks.
EndTimestamp (datetime) --
The time at which the stack set operation ended, across all accounts and regions specified. Note that this doesn't necessarily mean that the stack set operation was successful, or even attempted, in each account or region.
paginator = client.get_paginator('list_stack_sets')
Creates an iterator that will paginate through responses from CloudFormation.Client.list_stack_sets().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
Status='ACTIVE'|'DELETED',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Summaries': [
{
'StackSetName': 'string',
'StackSetId': 'string',
'Description': 'string',
'Status': 'ACTIVE'|'DELETED'
},
],
}
Response Structure
(dict) --
Summaries (list) --
A list of StackSetSummary structures that contain information about the user's stack sets.
(dict) --
The structures that contain summary information about the specified stack set.
StackSetName (string) --
The name of the stack set.
StackSetId (string) --
The ID of the stack set.
Description (string) --
A description of the stack set that you specify when the stack set is created or updated.
Status (string) --
The status of the stack set.
paginator = client.get_paginator('list_stacks')
Creates an iterator that will paginate through responses from CloudFormation.Client.list_stacks().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
StackStatusFilter=[
'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'ROLLBACK_IN_PROGRESS'|'ROLLBACK_FAILED'|'ROLLBACK_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'UPDATE_IN_PROGRESS'|'UPDATE_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_COMPLETE'|'UPDATE_ROLLBACK_IN_PROGRESS'|'UPDATE_ROLLBACK_FAILED'|'UPDATE_ROLLBACK_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_ROLLBACK_COMPLETE'|'REVIEW_IN_PROGRESS',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
Stack status to use as a filter. Specify one or more stack status codes to list only stacks with the specified status codes. For a complete list of stack status codes, see the StackStatus parameter of the Stack data type.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'StackSummaries': [
{
'StackId': 'string',
'StackName': 'string',
'TemplateDescription': 'string',
'CreationTime': datetime(2015, 1, 1),
'LastUpdatedTime': datetime(2015, 1, 1),
'DeletionTime': datetime(2015, 1, 1),
'StackStatus': 'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'ROLLBACK_IN_PROGRESS'|'ROLLBACK_FAILED'|'ROLLBACK_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'UPDATE_IN_PROGRESS'|'UPDATE_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_COMPLETE'|'UPDATE_ROLLBACK_IN_PROGRESS'|'UPDATE_ROLLBACK_FAILED'|'UPDATE_ROLLBACK_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_ROLLBACK_COMPLETE'|'REVIEW_IN_PROGRESS',
'StackStatusReason': 'string',
'ParentId': 'string',
'RootId': 'string',
'DriftInformation': {
'StackDriftStatus': 'DRIFTED'|'IN_SYNC'|'UNKNOWN'|'NOT_CHECKED',
'LastCheckTimestamp': datetime(2015, 1, 1)
}
},
],
}
Response Structure
(dict) --
The output for ListStacks action.
StackSummaries (list) --
A list of StackSummary structures containing information about the specified stacks.
(dict) --
The StackSummary Data Type
StackId (string) --
Unique stack identifier.
StackName (string) --
The name associated with the stack.
TemplateDescription (string) --
The template description of the template used to create the stack.
CreationTime (datetime) --
The time the stack was created.
LastUpdatedTime (datetime) --
The time the stack was last updated. This field will only be returned if the stack has been updated at least once.
DeletionTime (datetime) --
The time the stack was deleted.
StackStatus (string) --
The current status of the stack.
StackStatusReason (string) --
Success/Failure message associated with the stack status.
ParentId (string) --
For nested stacks--stacks created as resources for another stack--the stack ID of the direct parent of this stack. For the first level of nested stacks, the root stack is also the parent stack.
For more information, see Working with Nested Stacks in the AWS CloudFormation User Guide .
RootId (string) --
For nested stacks--stacks created as resources for another stack--the stack ID of the the top-level stack to which the nested stack ultimately belongs.
For more information, see Working with Nested Stacks in the AWS CloudFormation User Guide .
DriftInformation (dict) --
Summarizes information on whether a stack's actual configuration differs, or has drifted , from it's expected configuration, as defined in the stack template and any values specified as template parameters. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
StackDriftStatus (string) --
Status of the stack's actual configuration compared to its expected template configuration.
LastCheckTimestamp (datetime) --
Most recent time when a drift detection operation was initiated on the stack, or any of its individual resources that support drift detection.
The available waiters are:
waiter = client.get_waiter('change_set_create_complete')
Polls CloudFormation.Client.describe_change_set() every 30 seconds until a successful state is reached. An error is returned after 120 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
ChangeSetName='string',
StackName='string',
NextToken='string',
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
[REQUIRED]
The name or Amazon Resource Name (ARN) of the change set that you want to describe.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 30
The maximum number of attempts to be made. Default: 120
None
waiter = client.get_waiter('stack_create_complete')
Polls CloudFormation.Client.describe_stacks() every 30 seconds until a successful state is reached. An error is returned after 120 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
StackName='string',
NextToken='string',
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 30
The maximum number of attempts to be made. Default: 120
None
waiter = client.get_waiter('stack_delete_complete')
Polls CloudFormation.Client.describe_stacks() every 30 seconds until a successful state is reached. An error is returned after 120 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
StackName='string',
NextToken='string',
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 30
The maximum number of attempts to be made. Default: 120
None
waiter = client.get_waiter('stack_exists')
Polls CloudFormation.Client.describe_stacks() every 5 seconds until a successful state is reached. An error is returned after 20 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
StackName='string',
NextToken='string',
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 5
The maximum number of attempts to be made. Default: 20
None
waiter = client.get_waiter('stack_update_complete')
Polls CloudFormation.Client.describe_stacks() every 30 seconds until a successful state is reached. An error is returned after 120 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
StackName='string',
NextToken='string',
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 30
The maximum number of attempts to be made. Default: 120
None
A resource representing AWS CloudFormation:
import boto3
cloudformation = boto3.resource('cloudformation')
These are the resource's available actions:
These are the resource's available sub-resources:
These are the resource's available collections:
Actions
Actions call operations on resources. They may automatically handle the passing in of arguments set from identifiers and some attributes. For more information about actions refer to the Resources Introduction Guide.
Creates a stack as specified in the template. After the call completes successfully, the stack creation starts. You can check the status of the stack via the DescribeStacks API.
See also: AWS API Documentation
Request Syntax
stack = cloudformation.create_stack(
StackName='string',
TemplateBody='string',
TemplateURL='string',
Parameters=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
DisableRollback=True|False,
RollbackConfiguration={
'RollbackTriggers': [
{
'Arn': 'string',
'Type': 'string'
},
],
'MonitoringTimeInMinutes': 123
},
TimeoutInMinutes=123,
NotificationARNs=[
'string',
],
Capabilities=[
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
ResourceTypes=[
'string',
],
RoleARN='string',
OnFailure='DO_NOTHING'|'ROLLBACK'|'DELETE',
StackPolicyBody='string',
StackPolicyURL='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
ClientRequestToken='string',
EnableTerminationProtection=True|False
)
[REQUIRED]
The name that is associated with the stack. The name must be unique in the region in which you are creating the stack.
Note
A stack name can contain only alphanumeric characters (case sensitive) and hyphens. It must start with an alphabetic character and cannot be longer than 128 characters.
Structure containing the template body with a minimum length of 1 byte and a maximum length of 51,200 bytes. For more information, go to Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify either the TemplateBody or the TemplateURL parameter, but not both.
Location of file containing the template body. The URL must point to a template (max size: 460,800 bytes) that is located in an Amazon S3 bucket. For more information, go to the Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify either the TemplateBody or the TemplateURL parameter, but not both.
A list of Parameter structures that specify input parameters for the stack. For more information, see the Parameter data type.
The Parameter data type.
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
The input value associated with the parameter.
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
Set to true to disable rollback of the stack if stack creation failed. You can specify either DisableRollback or OnFailure , but not both.
Default: false
The rollback triggers for AWS CloudFormation to monitor during stack creation and updating operations, and for the specified monitoring period afterwards.
The triggers to monitor during stack creation or update actions.
By default, AWS CloudFormation saves the rollback triggers specified for a stack and applies them to any subsequent update operations for the stack, unless you specify otherwise. If you do specify rollback triggers for this parameter, those triggers replace any list of triggers previously specified for the stack. This means:
If a specified trigger is missing, the entire stack operation fails and is rolled back.
A rollback trigger AWS CloudFormation monitors during creation and updating of stacks. If any of the alarms you specify goes to ALARM state during the stack operation or within the specified monitoring period afterwards, CloudFormation rolls back the entire stack operation.
The Amazon Resource Name (ARN) of the rollback trigger.
If a specified trigger is missing, the entire stack operation fails and is rolled back.
The resource type of the rollback trigger. Currently, AWS::CloudWatch::Alarm is the only supported resource type.
The amount of time, in minutes, during which CloudFormation should monitor all the rollback triggers after the stack creation or update operation deploys all necessary resources.
The default is 0 minutes.
If you specify a monitoring period but do not specify any rollback triggers, CloudFormation still waits the specified period of time before cleaning up old resources after update operations. You can use this monitoring period to perform any manual stack validation desired, and manually cancel the stack creation or update (using CancelUpdateStack , for example) as necessary.
If you specify 0 for this parameter, CloudFormation still monitors the specified rollback triggers during stack creation and update operations. Then, for update operations, it begins disposing of old resources immediately once the operation completes.
The Simple Notification Service (SNS) topic ARNs to publish stack related events. You can find your SNS topic ARNs using the SNS console or your Command Line Interface (CLI).
In some cases, you must explicity acknowledge that your stack template contains certain capabilities in order for AWS CloudFormation to create the stack.
If your stack template contains these resources, we recommend that you review all permissions associated with them and edit their permissions if necessary.
For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates .
Warning
You should only create stacks directly from a stack template that contains macros if you know what processing the macro performs. Each macro relies on an underlying Lambda service function for processing stack templates. Be aware that the Lambda function owner can update the function operation without AWS CloudFormation being notified.
For more information, see Using AWS CloudFormation Macros to Perform Custom Processing on Templates .
The template resource types that you have permissions to work with for this create stack action, such as AWS::EC2::Instance , AWS::EC2::* , or Custom::MyCustomInstance . Use the following syntax to describe template resource types: AWS::* (for all AWS resource), Custom::* (for all custom resources), Custom::*logical_ID* `` (for a specific custom resource), ``AWS::*service_name* ::* (for all resources of a particular AWS service), and ``AWS::service_name ::resource_logical_ID `` (for a specific AWS resource).
If the list of resource types doesn't include a resource that you're creating, the stack creation fails. By default, AWS CloudFormation grants permissions to all resource types. AWS Identity and Access Management (IAM) uses this parameter for AWS CloudFormation-specific condition keys in IAM policies. For more information, see Controlling Access with AWS Identity and Access Management .
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes to create the stack. AWS CloudFormation uses the role's credentials to make calls on your behalf. AWS CloudFormation always uses this role for all future operations on the stack. As long as users have permission to operate on the stack, AWS CloudFormation uses this role even if the users don't have permission to pass it. Ensure that the role grants least privilege.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
Determines what action will be taken if stack creation fails. This must be one of: DO_NOTHING, ROLLBACK, or DELETE. You can specify either OnFailure or DisableRollback , but not both.
Default: ROLLBACK
Key-value pairs to associate with this stack. AWS CloudFormation also propagates these tags to the resources created in the stack. A maximum number of 50 tags can be specified.
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
A unique identifier for this CreateStack request. Specify this token if you plan to retry requests so that AWS CloudFormation knows that you're not attempting to create a stack with the same name. You might retry CreateStack requests to ensure that AWS CloudFormation successfully received them.
All events triggered by a given stack operation are assigned the same client request token, which you can use to track operations. For example, if you execute a CreateStack operation with the token token1 , then all the StackEvents generated by that operation will have ClientRequestToken set as token1 .
In the console, stack operations display the client request token on the Events tab. Stack operations that are initiated from the console use the token format Console-StackOperation-ID , which helps you easily identify the stack operation . For example, if you create a stack using the console, each stack event would be assigned the same token in the following format: Console-CreateStack-7f59c3cf-00d2-40c7-b2ff-e75db0987002 .
Whether to enable termination protection on the specified stack. If a user attempts to delete a stack with termination protection enabled, the operation fails and the stack remains unchanged. For more information, see Protecting a Stack From Being Deleted in the AWS CloudFormation User Guide . Termination protection is disabled on stacks by default.
For nested stacks , termination protection is set on the root stack and cannot be changed directly on the nested stack.
cloudformation.Stack
Stack resource
Returns a list of all the available sub-resources for this Resource.
Sub-resources
Sub-resources are methods that create a new instance of a child resource. This resource's identifiers get passed along to the child. For more information about sub-resources refer to the Resources Introduction Guide.
Creates a Event resource.:
event = cloudformation.Event('id')
Creates a Stack resource.:
stack = cloudformation.Stack('name')
Creates a StackResource resource.:
stack_resource = cloudformation.StackResource('stack_name','logical_id')
A StackResource resource
Creates a StackResourceSummary resource.:
stack_resource_summary = cloudformation.StackResourceSummary('stack_name','logical_id')
A StackResourceSummary resource
Collections
Collections provide an interface to iterate over and manipulate groups of resources. For more information about collections refer to the Resources Introduction Guide.
A collection of Stack resources
Creates an iterable of all Stack resources in the collection.
See also: AWS API Documentation
Request Syntax
stack_iterator = cloudformation.stacks.all()
Creates an iterable of all Stack resources in the collection filtered by kwargs passed to method.
See also: AWS API Documentation
Request Syntax
stack_iterator = cloudformation.stacks.filter(
StackName='string',
NextToken='string'
)
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Default: There is no default value.
list(cloudformation.Stack)
A list of Stack resources
Creates an iterable up to a specified amount of Stack resources in the collection.
See also: AWS API Documentation
Request Syntax
stack_iterator = cloudformation.stacks.limit(
count=123
)
Creates an iterable of all Stack resources in the collection, but limits the number of items returned by each service call by the specified amount.
See also: AWS API Documentation
Request Syntax
stack_iterator = cloudformation.stacks.page_size(
count=123
)
A resource representing an AWS CloudFormation Event:
import boto3
cloudformation = boto3.resource('cloudformation')
event = cloudformation.Event('id')
These are the resource's available identifiers:
These are the resource's available attributes:
Identifiers
Identifiers are properties of a resource that are set upon instantation of the resource. For more information about identifiers refer to the Resources Introduction Guide.
(string) The Event's id identifier. This must be set.
Attributes
Attributes provide access to the properties of a resource. Attributes are lazy-loaded the first time one is accessed via the load() method. For more information about attributes refer to the Resources Introduction Guide.
(string) --
The token passed to the operation that generated this event.
All events triggered by a given stack operation are assigned the same client request token, which you can use to track operations. For example, if you execute a CreateStack operation with the token token1 , then all the StackEvents generated by that operation will have ClientRequestToken set as token1 .
In the console, stack operations display the client request token on the Events tab. Stack operations that are initiated from the console use the token format Console-StackOperation-ID , which helps you easily identify the stack operation . For example, if you create a stack using the console, each stack event would be assigned the same token in the following format: Console-CreateStack-7f59c3cf-00d2-40c7-b2ff-e75db0987002 .
(string) --
The unique ID of this event.
(string) --
The logical name of the resource specified in the template.
(string) --
The name or unique identifier associated with the physical instance of the resource.
(string) --
BLOB of the properties used to create the resource.
(string) --
Current status of the resource.
(string) --
Success/failure message associated with the resource.
(string) --
Type of resource. (For more information, go to AWS Resource Types Reference in the AWS CloudFormation User Guide.)
(string) --
The unique ID name of the instance of the stack.
(string) --
The name associated with a stack.
(datetime) --
Time the status was updated.
A resource representing an AWS CloudFormation Stack:
import boto3
cloudformation = boto3.resource('cloudformation')
stack = cloudformation.Stack('name')
These are the resource's available identifiers:
These are the resource's available attributes:
These are the resource's available actions:
These are the resource's available sub-resources:
These are the resource's available collections:
Identifiers
Identifiers are properties of a resource that are set upon instantation of the resource. For more information about identifiers refer to the Resources Introduction Guide.
(string) The Stack's name identifier. This must be set.
Attributes
Attributes provide access to the properties of a resource. Attributes are lazy-loaded the first time one is accessed via the load() method. For more information about attributes refer to the Resources Introduction Guide.
(list) --
The capabilities allowed in the stack.
(string) --
The unique ID of the change set.
(datetime) --
The time at which the stack was created.
(datetime) --
The time the stack was deleted.
(string) --
A user-defined description associated with the stack.
(boolean) --
Boolean to enable or disable rollback on stack creation failures:
(dict) --
Information on whether a stack's actual configuration differs, or has drifted , from it's expected configuration, as defined in the stack template and any values specified as template parameters. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
StackDriftStatus (string) --
Status of the stack's actual configuration compared to its expected template configuration.
LastCheckTimestamp (datetime) --
Most recent time when a drift detection operation was initiated on the stack, or any of its individual resources that support drift detection.
(boolean) --
Whether termination protection is enabled for the stack.
For nested stacks , termination protection is set on the root stack and cannot be changed directly on the nested stack. For more information, see Protecting a Stack From Being Deleted in the AWS CloudFormation User Guide .
(datetime) --
The time the stack was last updated. This field will only be returned if the stack has been updated at least once.
(list) --
SNS topic ARNs to which stack related events are published.
(list) --
A list of output structures.
(dict) --
The Output data type.
OutputKey (string) --
The key associated with the output.
OutputValue (string) --
The value associated with the output.
Description (string) --
User defined description associated with the output.
ExportName (string) --
The name of the export associated with the output.
(list) --
A list of Parameter structures.
(dict) --
The Parameter data type.
ParameterKey (string) --
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
ParameterValue (string) --
The input value associated with the parameter.
UsePreviousValue (boolean) --
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
ResolvedValue (string) --
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
(string) --
For nested stacks--stacks created as resources for another stack--the stack ID of the direct parent of this stack. For the first level of nested stacks, the root stack is also the parent stack.
For more information, see Working with Nested Stacks in the AWS CloudFormation User Guide .
(string) --
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that is associated with the stack. During a stack operation, AWS CloudFormation uses this role's credentials to make calls on your behalf.
(dict) --
The rollback triggers for AWS CloudFormation to monitor during stack creation and updating operations, and for the specified monitoring period afterwards.
RollbackTriggers (list) --
The triggers to monitor during stack creation or update actions.
By default, AWS CloudFormation saves the rollback triggers specified for a stack and applies them to any subsequent update operations for the stack, unless you specify otherwise. If you do specify rollback triggers for this parameter, those triggers replace any list of triggers previously specified for the stack. This means:
If a specified trigger is missing, the entire stack operation fails and is rolled back.
(dict) --
A rollback trigger AWS CloudFormation monitors during creation and updating of stacks. If any of the alarms you specify goes to ALARM state during the stack operation or within the specified monitoring period afterwards, CloudFormation rolls back the entire stack operation.
Arn (string) --
The Amazon Resource Name (ARN) of the rollback trigger.
If a specified trigger is missing, the entire stack operation fails and is rolled back.
Type (string) --
The resource type of the rollback trigger. Currently, AWS::CloudWatch::Alarm is the only supported resource type.
MonitoringTimeInMinutes (integer) --
The amount of time, in minutes, during which CloudFormation should monitor all the rollback triggers after the stack creation or update operation deploys all necessary resources.
The default is 0 minutes.
If you specify a monitoring period but do not specify any rollback triggers, CloudFormation still waits the specified period of time before cleaning up old resources after update operations. You can use this monitoring period to perform any manual stack validation desired, and manually cancel the stack creation or update (using CancelUpdateStack , for example) as necessary.
If you specify 0 for this parameter, CloudFormation still monitors the specified rollback triggers during stack creation and update operations. Then, for update operations, it begins disposing of old resources immediately once the operation completes.
(string) --
For nested stacks--stacks created as resources for another stack--the stack ID of the the top-level stack to which the nested stack ultimately belongs.
For more information, see Working with Nested Stacks in the AWS CloudFormation User Guide .
(string) --
Unique identifier of the stack.
(string) --
The name associated with the stack.
(string) --
Current status of the stack.
(string) --
Success/failure message associated with the stack status.
(list) --
A list of Tag s that specify information about the stack.
(dict) --
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Key (string) --
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Value (string) --
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
(integer) --
The amount of time within which stack creation should complete.
Actions
Actions call operations on resources. They may automatically handle the passing in of arguments set from identifiers and some attributes. For more information about actions refer to the Resources Introduction Guide.
Cancels an update on the specified stack. If the call completes successfully, the stack rolls back the update and reverts to the previous stack configuration.
Note
You can cancel only stacks that are in the UPDATE_IN_PROGRESS state.
See also: AWS API Documentation
Request Syntax
response = stack.cancel_update(
ClientRequestToken='string'
)
Deletes a specified stack. Once the call completes successfully, stack deletion starts. Deleted stacks do not show up in the DescribeStacks API if the deletion has been completed successfully.
See also: AWS API Documentation
Request Syntax
response = stack.delete(
RetainResources=[
'string',
],
RoleARN='string',
ClientRequestToken='string'
)
For stacks in the DELETE_FAILED state, a list of resource logical IDs that are associated with the resources you want to retain. During deletion, AWS CloudFormation deletes the stack but does not delete the retained resources.
Retaining resources is useful when you cannot delete a resource, such as a non-empty S3 bucket, but you want to delete the stack.
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes to delete the stack. AWS CloudFormation uses the role's credentials to make calls on your behalf.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
A unique identifier for this DeleteStack request. Specify this token if you plan to retry requests so that AWS CloudFormation knows that you're not attempting to delete a stack with the same name. You might retry DeleteStack requests to ensure that AWS CloudFormation successfully received them.
All events triggered by a given stack operation are assigned the same client request token, which you can use to track operations. For example, if you execute a CreateStack operation with the token token1 , then all the StackEvents generated by that operation will have ClientRequestToken set as token1 .
In the console, stack operations display the client request token on the Events tab. Stack operations that are initiated from the console use the token format Console-StackOperation-ID , which helps you easily identify the stack operation . For example, if you create a stack using the console, each stack event would be assigned the same token in the following format: Console-CreateStack-7f59c3cf-00d2-40c7-b2ff-e75db0987002 .
None
Returns a list of all the available sub-resources for this Resource.
Calls CloudFormation.Client.describe_stacks() to update the attributes of the Stack resource. Note that the load and reload methods are the same method and can be used interchangeably.
See also: AWS API Documentation
Request Syntax
stack.load()
Calls CloudFormation.Client.describe_stacks() to update the attributes of the Stack resource. Note that the load and reload methods are the same method and can be used interchangeably.
See also: AWS API Documentation
Request Syntax
stack.reload()
Updates a stack as specified in the template. After the call completes successfully, the stack update starts. You can check the status of the stack via the DescribeStacks action.
To get a copy of the template for an existing stack, you can use the GetTemplate action.
For more information about creating an update template, updating a stack, and monitoring the progress of the update, see Updating a Stack .
See also: AWS API Documentation
Request Syntax
response = stack.update(
TemplateBody='string',
TemplateURL='string',
UsePreviousTemplate=True|False,
StackPolicyDuringUpdateBody='string',
StackPolicyDuringUpdateURL='string',
Parameters=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False,
'ResolvedValue': 'string'
},
],
Capabilities=[
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM'|'CAPABILITY_AUTO_EXPAND',
],
ResourceTypes=[
'string',
],
RoleARN='string',
RollbackConfiguration={
'RollbackTriggers': [
{
'Arn': 'string',
'Type': 'string'
},
],
'MonitoringTimeInMinutes': 123
},
StackPolicyBody='string',
StackPolicyURL='string',
NotificationARNs=[
'string',
],
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
ClientRequestToken='string'
)
Structure containing the template body with a minimum length of 1 byte and a maximum length of 51,200 bytes. (For more information, go to Template Anatomy in the AWS CloudFormation User Guide.)
Conditional: You must specify only one of the following parameters: TemplateBody , TemplateURL , or set the UsePreviousTemplate to true .
Location of file containing the template body. The URL must point to a template that is located in an Amazon S3 bucket. For more information, go to Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify only one of the following parameters: TemplateBody , TemplateURL , or set the UsePreviousTemplate to true .
Reuse the existing template that is associated with the stack that you are updating.
Conditional: You must specify only one of the following parameters: TemplateBody , TemplateURL , or set the UsePreviousTemplate to true .
Structure containing the temporary overriding stack policy body. You can specify either the StackPolicyDuringUpdateBody or the StackPolicyDuringUpdateURL parameter, but not both.
If you want to update protected resources, specify a temporary overriding stack policy during this update. If you do not specify a stack policy, the current policy that is associated with the stack will be used.
Location of a file containing the temporary overriding stack policy. The URL must point to a policy (max size: 16KB) located in an S3 bucket in the same region as the stack. You can specify either the StackPolicyDuringUpdateBody or the StackPolicyDuringUpdateURL parameter, but not both.
If you want to update protected resources, specify a temporary overriding stack policy during this update. If you do not specify a stack policy, the current policy that is associated with the stack will be used.
A list of Parameter structures that specify input parameters for the stack. For more information, see the Parameter data type.
The Parameter data type.
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
The input value associated with the parameter.
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
Read-only. The value that corresponds to a Systems Manager parameter key. This field is returned only for ` SSM parameter types <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/parameters-section-structure.html#aws-ssm-parameter-types>`__ in the template.
In some cases, you must explicity acknowledge that your stack template contains certain capabilities in order for AWS CloudFormation to update the stack.
If your stack template contains these resources, we recommend that you review all permissions associated with them and edit their permissions if necessary.
For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates .
Warning
You should only update stacks directly from a stack template that contains macros if you know what processing the macro performs. Each macro relies on an underlying Lambda service function for processing stack templates. Be aware that the Lambda function owner can update the function operation without AWS CloudFormation being notified.
For more information, see Using AWS CloudFormation Macros to Perform Custom Processing on Templates .
The template resource types that you have permissions to work with for this update stack action, such as AWS::EC2::Instance , AWS::EC2::* , or Custom::MyCustomInstance .
If the list of resource types doesn't include a resource that you're updating, the stack update fails. By default, AWS CloudFormation grants permissions to all resource types. AWS Identity and Access Management (IAM) uses this parameter for AWS CloudFormation-specific condition keys in IAM policies. For more information, see Controlling Access with AWS Identity and Access Management .
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes to update the stack. AWS CloudFormation uses the role's credentials to make calls on your behalf. AWS CloudFormation always uses this role for all future operations on the stack. As long as users have permission to operate on the stack, AWS CloudFormation uses this role even if the users don't have permission to pass it. Ensure that the role grants least privilege.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
The rollback triggers for AWS CloudFormation to monitor during stack creation and updating operations, and for the specified monitoring period afterwards.
The triggers to monitor during stack creation or update actions.
By default, AWS CloudFormation saves the rollback triggers specified for a stack and applies them to any subsequent update operations for the stack, unless you specify otherwise. If you do specify rollback triggers for this parameter, those triggers replace any list of triggers previously specified for the stack. This means:
If a specified trigger is missing, the entire stack operation fails and is rolled back.
A rollback trigger AWS CloudFormation monitors during creation and updating of stacks. If any of the alarms you specify goes to ALARM state during the stack operation or within the specified monitoring period afterwards, CloudFormation rolls back the entire stack operation.
The Amazon Resource Name (ARN) of the rollback trigger.
If a specified trigger is missing, the entire stack operation fails and is rolled back.
The resource type of the rollback trigger. Currently, AWS::CloudWatch::Alarm is the only supported resource type.
The amount of time, in minutes, during which CloudFormation should monitor all the rollback triggers after the stack creation or update operation deploys all necessary resources.
The default is 0 minutes.
If you specify a monitoring period but do not specify any rollback triggers, CloudFormation still waits the specified period of time before cleaning up old resources after update operations. You can use this monitoring period to perform any manual stack validation desired, and manually cancel the stack creation or update (using CancelUpdateStack , for example) as necessary.
If you specify 0 for this parameter, CloudFormation still monitors the specified rollback triggers during stack creation and update operations. Then, for update operations, it begins disposing of old resources immediately once the operation completes.
Structure containing a new stack policy body. You can specify either the StackPolicyBody or the StackPolicyURL parameter, but not both.
You might update the stack policy, for example, in order to protect a new resource that you created during a stack update. If you do not specify a stack policy, the current policy that is associated with the stack is unchanged.
Location of a file containing the updated stack policy. The URL must point to a policy (max size: 16KB) located in an S3 bucket in the same region as the stack. You can specify either the StackPolicyBody or the StackPolicyURL parameter, but not both.
You might update the stack policy, for example, in order to protect a new resource that you created during a stack update. If you do not specify a stack policy, the current policy that is associated with the stack is unchanged.
Amazon Simple Notification Service topic Amazon Resource Names (ARNs) that AWS CloudFormation associates with the stack. Specify an empty list to remove all notification topics.
Key-value pairs to associate with this stack. AWS CloudFormation also propagates these tags to supported resources in the stack. You can specify a maximum number of 50 tags.
If you don't specify this parameter, AWS CloudFormation doesn't modify the stack's tags. If you specify an empty value, AWS CloudFormation removes all associated tags.
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
A unique identifier for this UpdateStack request. Specify this token if you plan to retry requests so that AWS CloudFormation knows that you're not attempting to update a stack with the same name. You might retry UpdateStack requests to ensure that AWS CloudFormation successfully received them.
All events triggered by a given stack operation are assigned the same client request token, which you can use to track operations. For example, if you execute a CreateStack operation with the token token1 , then all the StackEvents generated by that operation will have ClientRequestToken set as token1 .
In the console, stack operations display the client request token on the Events tab. Stack operations that are initiated from the console use the token format Console-StackOperation-ID , which helps you easily identify the stack operation . For example, if you create a stack using the console, each stack event would be assigned the same token in the following format: Console-CreateStack-7f59c3cf-00d2-40c7-b2ff-e75db0987002 .
dict
Response Syntax
{
'StackId': 'string'
}
Response Structure
(dict) --
The output for an UpdateStack action.
StackId (string) --
Unique identifier of the stack.
Sub-resources
Sub-resources are methods that create a new instance of a child resource. This resource's identifiers get passed along to the child. For more information about sub-resources refer to the Resources Introduction Guide.
Creates a StackResource resource.:
stack_resource = stack.Resource('logical_id')
Collections
Collections provide an interface to iterate over and manipulate groups of resources. For more information about collections refer to the Resources Introduction Guide.
A collection of Event resources
Creates an iterable of all Event resources in the collection.
See also: AWS API Documentation
Request Syntax
event_iterator = stack.events.all()
Creates an iterable of all Event resources in the collection filtered by kwargs passed to method.
See also: AWS API Documentation
Request Syntax
event_iterator = stack.events.filter(
NextToken='string'
)
Creates an iterable up to a specified amount of Event resources in the collection.
See also: AWS API Documentation
Request Syntax
event_iterator = stack.events.limit(
count=123
)
Creates an iterable of all Event resources in the collection, but limits the number of items returned by each service call by the specified amount.
See also: AWS API Documentation
Request Syntax
event_iterator = stack.events.page_size(
count=123
)
A collection of StackResourceSummary resources
Creates an iterable of all StackResourceSummary resources in the collection.
See also: AWS API Documentation
Request Syntax
stack_resource_summary_iterator = stack.resource_summaries.all()
Creates an iterable of all StackResourceSummary resources in the collection filtered by kwargs passed to method.
See also: AWS API Documentation
Request Syntax
stack_resource_summary_iterator = stack.resource_summaries.filter(
NextToken='string'
)
Creates an iterable up to a specified amount of StackResourceSummary resources in the collection.
See also: AWS API Documentation
Request Syntax
stack_resource_summary_iterator = stack.resource_summaries.limit(
count=123
)
Creates an iterable of all StackResourceSummary resources in the collection, but limits the number of items returned by each service call by the specified amount.
See also: AWS API Documentation
Request Syntax
stack_resource_summary_iterator = stack.resource_summaries.page_size(
count=123
)
A resource representing an AWS CloudFormation StackResource:
import boto3
cloudformation = boto3.resource('cloudformation')
stack_resource = cloudformation.StackResource('stack_name','logical_id')
These are the resource's available identifiers:
These are the resource's available attributes:
These are the resource's available sub-resources:
Identifiers
Identifiers are properties of a resource that are set upon instantation of the resource. For more information about identifiers refer to the Resources Introduction Guide.
(string) The StackResource's stack_name identifier. This must be set.
(string) The StackResource's logical_id identifier. This must be set.
Attributes
Attributes provide access to the properties of a resource. Attributes are lazy-loaded the first time one is accessed via the load() method. For more information about attributes refer to the Resources Introduction Guide.
(string) --
User defined description associated with the resource.
(dict) --
Information about whether the resource's actual configuration differs, or has drifted , from its expected configuration, as defined in the stack template and any values specified as template parameters. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
StackResourceDriftStatus (string) --
Status of the resource's actual configuration compared to its expected configuration
LastCheckTimestamp (datetime) --
When AWS CloudFormation last checked if the resource had drifted from its expected configuration.
(datetime) --
Time the status was updated.
(string) --
The logical name of the resource specified in the template.
(string) --
The content of the Metadata attribute declared for the resource. For more information, see Metadata Attribute in the AWS CloudFormation User Guide.
(string) --
The name or unique identifier that corresponds to a physical instance ID of a resource supported by AWS CloudFormation.
(string) --
Current status of the resource.
(string) --
Success/failure message associated with the resource.
(string) --
Type of resource. ((For more information, go to AWS Resource Types Reference in the AWS CloudFormation User Guide.)
(string) --
Unique identifier of the stack.
Sub-resources
Sub-resources are methods that create a new instance of a child resource. This resource's identifiers get passed along to the child. For more information about sub-resources refer to the Resources Introduction Guide.
Creates a Stack resource.:
stack = stack_resource.Stack()
A resource representing an AWS CloudFormation StackResourceSummary:
import boto3
cloudformation = boto3.resource('cloudformation')
stack_resource_summary = cloudformation.StackResourceSummary('stack_name','logical_id')
These are the resource's available identifiers:
These are the resource's available attributes:
These are the resource's available sub-resources:
Identifiers
Identifiers are properties of a resource that are set upon instantation of the resource. For more information about identifiers refer to the Resources Introduction Guide.
(string) The StackResourceSummary's stack_name identifier. This must be set.
(string) The StackResourceSummary's logical_id identifier. This must be set.
Attributes
Attributes provide access to the properties of a resource. Attributes are lazy-loaded the first time one is accessed via the load() method. For more information about attributes refer to the Resources Introduction Guide.
(dict) --
Information about whether the resource's actual configuration differs, or has drifted , from its expected configuration, as defined in the stack template and any values specified as template parameters. For more information, see Detecting Unregulated Configuration Changes to Stacks and Resources .
StackResourceDriftStatus (string) --
Status of the resource's actual configuration compared to its expected configuration
LastCheckTimestamp (datetime) --
When AWS CloudFormation last checked if the resource had drifted from its expected configuration.
(datetime) --
Time the status was updated.
(string) --
The logical name of the resource specified in the template.
(string) --
The name or unique identifier that corresponds to a physical instance ID of the resource.
(string) --
Current status of the resource.
(string) --
Success/failure message associated with the resource.
(string) --
Type of resource. (For more information, go to AWS Resource Types Reference in the AWS CloudFormation User Guide.)
Sub-resources
Sub-resources are methods that create a new instance of a child resource. This resource's identifiers get passed along to the child. For more information about sub-resources refer to the Resources Introduction Guide.
Creates a StackResource resource.:
stack_resource = stack_resource_summary.Resource()