Table of Contents
A low-level client representing Amazon Redshift:
import boto3
client = boto3.client('redshift')
These are the available methods:
Exchanges a DC1 Reserved Node for a DC2 Reserved Node with no changes to the configuration (term, payment type, or number of nodes) and no additional costs.
See also: AWS API Documentation
Request Syntax
response = client.accept_reserved_node_exchange(
ReservedNodeId='string',
TargetReservedNodeOfferingId='string'
)
[REQUIRED]
A string representing the node identifier of the DC1 Reserved Node to be exchanged.
[REQUIRED]
The unique identifier of the DC2 Reserved Node offering to be used for the exchange. You can obtain the value for the parameter by calling GetReservedNodeExchangeOfferings
dict
Response Syntax
{
'ExchangedReservedNode': {
'ReservedNodeId': 'string',
'ReservedNodeOfferingId': 'string',
'NodeType': 'string',
'StartTime': datetime(2015, 1, 1),
'Duration': 123,
'FixedPrice': 123.0,
'UsagePrice': 123.0,
'CurrencyCode': 'string',
'NodeCount': 123,
'State': 'string',
'OfferingType': 'string',
'RecurringCharges': [
{
'RecurringChargeAmount': 123.0,
'RecurringChargeFrequency': 'string'
},
],
'ReservedNodeOfferingType': 'Regular'|'Upgradable'
}
}
Response Structure
(dict) --
ExchangedReservedNode (dict) --
ReservedNodeId (string) --
The unique identifier for the reservation.
ReservedNodeOfferingId (string) --
The identifier for the reserved node offering.
NodeType (string) --
The node type of the reserved node.
StartTime (datetime) --
The time the reservation started. You purchase a reserved node offering for a duration. This is the start time of that duration.
Duration (integer) --
The duration of the node reservation in seconds.
FixedPrice (float) --
The fixed cost Amazon Redshift charges you for this reserved node.
UsagePrice (float) --
The hourly rate Amazon Redshift charges you for this reserved node.
CurrencyCode (string) --
The currency code for the reserved cluster.
NodeCount (integer) --
The number of reserved compute nodes.
State (string) --
The state of the reserved compute node.
Possible Values:
OfferingType (string) --
The anticipated utilization of the reserved node, as defined in the reserved node offering.
RecurringCharges (list) --
The recurring charges for the reserved node.
(dict) --
Describes a recurring charge.
RecurringChargeAmount (float) --
The amount charged per the period of time specified by the recurring charge frequency.
RecurringChargeFrequency (string) --
The frequency at which the recurring charge amount is applied.
ReservedNodeOfferingType (string) --
Adds an inbound (ingress) rule to an Amazon Redshift security group. Depending on whether the application accessing your cluster is running on the Internet or an Amazon EC2 instance, you can authorize inbound access to either a Classless Interdomain Routing (CIDR)/Internet Protocol (IP) range or to an Amazon EC2 security group. You can add as many as 20 ingress rules to an Amazon Redshift security group.
If you authorize access to an Amazon EC2 security group, specify EC2SecurityGroupName and EC2SecurityGroupOwnerId . The Amazon EC2 security group and Amazon Redshift cluster must be in the same AWS Region.
If you authorize access to a CIDR/IP address range, specify CIDRIP . For an overview of CIDR blocks, see the Wikipedia article on Classless Inter-Domain Routing .
You must also associate the security group with a cluster so that clients running on these IP addresses or the EC2 instance are authorized to connect to the cluster. For information about managing security groups, go to Working with Security Groups in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.authorize_cluster_security_group_ingress(
ClusterSecurityGroupName='string',
CIDRIP='string',
EC2SecurityGroupName='string',
EC2SecurityGroupOwnerId='string'
)
[REQUIRED]
The name of the security group to which the ingress rule is added.
The AWS account number of the owner of the security group specified by the EC2SecurityGroupName parameter. The AWS Access Key ID is not an acceptable value.
Example: 111122223333
dict
Response Syntax
{
'ClusterSecurityGroup': {
'ClusterSecurityGroupName': 'string',
'Description': 'string',
'EC2SecurityGroups': [
{
'Status': 'string',
'EC2SecurityGroupName': 'string',
'EC2SecurityGroupOwnerId': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'IPRanges': [
{
'Status': 'string',
'CIDRIP': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
}
Response Structure
(dict) --
ClusterSecurityGroup (dict) --
Describes a security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group to which the operation was applied.
Description (string) --
A description of the security group.
EC2SecurityGroups (list) --
A list of EC2 security groups that are permitted to access clusters associated with this cluster security group.
(dict) --
Describes an Amazon EC2 security group.
Status (string) --
The status of the EC2 security group.
EC2SecurityGroupName (string) --
The name of the EC2 Security Group.
EC2SecurityGroupOwnerId (string) --
The AWS ID of the owner of the EC2 security group specified in the EC2SecurityGroupName field.
Tags (list) --
The list of tags for the EC2 security group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
IPRanges (list) --
A list of IP ranges (CIDR blocks) that are permitted to access clusters associated with this cluster security group.
(dict) --
Describes an IP range used in a security group.
Status (string) --
The status of the IP range, for example, "authorized".
CIDRIP (string) --
The IP range in Classless Inter-Domain Routing (CIDR) notation.
Tags (list) --
The list of tags for the IP range.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Tags (list) --
The list of tags for the cluster security group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Authorizes the specified AWS customer account to restore the specified snapshot.
For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.authorize_snapshot_access(
SnapshotIdentifier='string',
SnapshotClusterIdentifier='string',
AccountWithRestoreAccess='string'
)
[REQUIRED]
The identifier of the snapshot the account is authorized to restore.
[REQUIRED]
The identifier of the AWS customer account authorized to restore the specified snapshot.
To share a snapshot with AWS support, specify amazon-redshift-support.
dict
Response Syntax
{
'Snapshot': {
'SnapshotIdentifier': 'string',
'ClusterIdentifier': 'string',
'SnapshotCreateTime': datetime(2015, 1, 1),
'Status': 'string',
'Port': 123,
'AvailabilityZone': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'MasterUsername': 'string',
'ClusterVersion': 'string',
'SnapshotType': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'DBName': 'string',
'VpcId': 'string',
'Encrypted': True|False,
'KmsKeyId': 'string',
'EncryptedWithHSM': True|False,
'AccountsWithRestoreAccess': [
{
'AccountId': 'string',
'AccountAlias': 'string'
},
],
'OwnerAccount': 'string',
'TotalBackupSizeInMegaBytes': 123.0,
'ActualIncrementalBackupSizeInMegaBytes': 123.0,
'BackupProgressInMegaBytes': 123.0,
'CurrentBackupRateInMegaBytesPerSecond': 123.0,
'EstimatedSecondsToCompletion': 123,
'ElapsedTimeInSeconds': 123,
'SourceRegion': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'RestorableNodeTypes': [
'string',
],
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'ManualSnapshotRetentionPeriod': 123,
'ManualSnapshotRemainingDays': 123,
'SnapshotRetentionStartTime': datetime(2015, 1, 1)
}
}
Response Structure
(dict) --
Snapshot (dict) --
Describes a snapshot.
SnapshotIdentifier (string) --
The snapshot identifier that is provided in the request.
ClusterIdentifier (string) --
The identifier of the cluster for which the snapshot was taken.
SnapshotCreateTime (datetime) --
The time (in UTC format) when Amazon Redshift began the snapshot. A snapshot contains a copy of the cluster data as of this exact time.
Status (string) --
The snapshot status. The value of the status depends on the API operation used:
Port (integer) --
The port that the cluster is listening on.
AvailabilityZone (string) --
The Availability Zone in which the cluster was created.
ClusterCreateTime (datetime) --
The time (UTC) when the cluster was originally created.
MasterUsername (string) --
The master user name for the cluster.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
SnapshotType (string) --
The snapshot type. Snapshots created using CreateClusterSnapshot and CopyClusterSnapshot are of type "manual".
NodeType (string) --
The node type of the nodes in the cluster.
NumberOfNodes (integer) --
The number of nodes in the cluster.
DBName (string) --
The name of the database that was created when the cluster was created.
VpcId (string) --
The VPC identifier of the cluster if the snapshot is from a cluster in a VPC. Otherwise, this field is not in the output.
Encrypted (boolean) --
If true , the data in the snapshot is encrypted at rest.
KmsKeyId (string) --
The AWS Key Management Service (KMS) key ID of the encryption key that was used to encrypt data in the cluster from which the snapshot was taken.
EncryptedWithHSM (boolean) --
A boolean that indicates whether the snapshot data is encrypted using the HSM keys of the source cluster. true indicates that the data is encrypted using HSM keys.
AccountsWithRestoreAccess (list) --
A list of the AWS customer accounts authorized to restore the snapshot. Returns null if no accounts are authorized. Visible only to the snapshot owner.
(dict) --
Describes an AWS customer account authorized to restore a snapshot.
AccountId (string) --
The identifier of an AWS customer account authorized to restore a snapshot.
AccountAlias (string) --
The identifier of an AWS support account authorized to restore a snapshot. For AWS support, the identifier is amazon-redshift-support .
OwnerAccount (string) --
For manual snapshots, the AWS customer account used to create or copy the snapshot. For automatic snapshots, the owner of the cluster. The owner can perform all snapshot actions, such as sharing a manual snapshot.
TotalBackupSizeInMegaBytes (float) --
The size of the complete set of backup data that would be used to restore the cluster.
ActualIncrementalBackupSizeInMegaBytes (float) --
The size of the incremental backup.
BackupProgressInMegaBytes (float) --
The number of megabytes that have been transferred to the snapshot backup.
CurrentBackupRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred to the snapshot backup. Returns 0 for a completed backup.
EstimatedSecondsToCompletion (integer) --
The estimate of the time remaining before the snapshot backup will complete. Returns 0 for a completed backup.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress snapshot backup has been running, or the amount of time it took a completed backup to finish.
SourceRegion (string) --
The source region from which the snapshot was copied.
Tags (list) --
The list of tags for the cluster snapshot.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
RestorableNodeTypes (list) --
The list of node types that this cluster snapshot is able to restore into.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track for the snapshot.
ManualSnapshotRetentionPeriod (integer) --
The number of days that a manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
ManualSnapshotRemainingDays (integer) --
The number of days until a manual snapshot will pass its retention period.
SnapshotRetentionStartTime (datetime) --
A timestamp representing the start of the retention period for the snapshot.
Deletes a set of cluster snapshots.
See also: AWS API Documentation
Request Syntax
response = client.batch_delete_cluster_snapshots(
Identifiers=[
{
'SnapshotIdentifier': 'string',
'SnapshotClusterIdentifier': 'string'
},
]
)
[REQUIRED]
A list of identifiers for the snapshots that you want to delete.
The unique identifier of the manual snapshot to be deleted.
Constraints: Must be the name of an existing snapshot that is in the available , failed , or cancelled state.
The unique identifier of the cluster the snapshot was created from. This parameter is required if your IAM user has a policy containing a snapshot resource element that specifies anything other than * for the cluster name.
Constraints: Must be the name of valid cluster.
{
'Resources': [
'string',
],
'Errors': [
{
'SnapshotIdentifier': 'string',
'SnapshotClusterIdentifier': 'string',
'FailureCode': 'string',
'FailureReason': 'string'
},
]
}
Response Structure
A list of the snapshot identifiers that were deleted.
A list of any errors returned.
Describes the errors returned by a snapshot.
A unique identifier for the snapshot returning the error.
A unique identifier for the cluster.
The failure code for the error.
The text message describing the error.
Modifies the settings for a list of snapshots.
See also: AWS API Documentation
Request Syntax
response = client.batch_modify_cluster_snapshots(
SnapshotIdentifierList=[
'string',
],
ManualSnapshotRetentionPeriod=123,
Force=True|False
)
[REQUIRED]
A list of snapshot identifiers you want to modify.
The number of days that a manual snapshot is retained. If you specify the value -1, the manual snapshot is retained indefinitely.
The number must be either -1 or an integer between 1 and 3,653.
If you decrease the manual snapshot retention period from its current value, existing manual snapshots that fall outside of the new retention period will return an error. If you want to suppress the errors and delete the snapshots, use the force option.
dict
Response Syntax
{
'Resources': [
'string',
],
'Errors': [
{
'SnapshotIdentifier': 'string',
'SnapshotClusterIdentifier': 'string',
'FailureCode': 'string',
'FailureReason': 'string'
},
]
}
Response Structure
(dict) --
Resources (list) --
A list of the snapshots that were modified.
Errors (list) --
A list of any errors returned.
(dict) --
Describes the errors returned by a snapshot.
SnapshotIdentifier (string) --
A unique identifier for the snapshot returning the error.
SnapshotClusterIdentifier (string) --
A unique identifier for the cluster.
FailureCode (string) --
The failure code for the error.
FailureReason (string) --
The text message describing the error.
Check if an operation can be paginated.
Cancels a resize operation.
See also: AWS API Documentation
Request Syntax
response = client.cancel_resize(
ClusterIdentifier='string'
)
[REQUIRED]
The unique identifier for the cluster that you want to cancel a resize operation for.
{
'TargetNodeType': 'string',
'TargetNumberOfNodes': 123,
'TargetClusterType': 'string',
'Status': 'string',
'ImportTablesCompleted': [
'string',
],
'ImportTablesInProgress': [
'string',
],
'ImportTablesNotStarted': [
'string',
],
'AvgResizeRateInMegaBytesPerSecond': 123.0,
'TotalResizeDataInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ResizeType': 'string',
'Message': 'string',
'TargetEncryptionType': 'string',
'DataTransferProgressPercent': 123.0
}
Response Structure
Describes the result of a cluster resize operation.
The node type that the cluster will have after the resize operation is complete.
The number of nodes that the cluster will have after the resize operation is complete.
The cluster type after the resize operation is complete.
Valid Values: multi-node | single-node
The status of the resize operation.
Valid Values: NONE | IN_PROGRESS | FAILED | SUCCEEDED | CANCELLING
The names of tables that have been completely imported .
Valid Values: List of table names.
The names of tables that are being currently imported.
Valid Values: List of table names.
The names of tables that have not been yet imported.
Valid Values: List of table names
The average rate of the resize operation over the last few minutes, measured in megabytes per second. After the resize operation completes, this value shows the average rate of the entire resize operation.
The estimated total amount of data, in megabytes, on the cluster before the resize operation began.
While the resize operation is in progress, this value shows the current amount of data, in megabytes, that has been processed so far. When the resize operation is complete, this value shows the total amount of data, in megabytes, on the cluster, which may be more or less than TotalResizeDataInMegaBytes (the estimated total amount of data before resize).
The amount of seconds that have elapsed since the resize operation began. After the resize operation completes, this value shows the total actual time, in seconds, for the resize operation.
The estimated time remaining, in seconds, until the resize operation is complete. This value is calculated based on the average resize rate and the estimated amount of data remaining to be processed. Once the resize operation is complete, this value will be 0.
An enum with possible values of ClassicResize and ElasticResize . These values describe the type of resize operation being performed.
An optional string to provide additional details about the resize action.
The type of encryption for the cluster after the resize is complete.
Possible values are KMS and None . In the China region possible values are: Legacy and None .
The percent of data transferred from source cluster to target cluster.
Copies the specified automated cluster snapshot to a new manual cluster snapshot. The source must be an automated snapshot and it must be in the available state.
When you delete a cluster, Amazon Redshift deletes any automated snapshots of the cluster. Also, when the retention period of the snapshot expires, Amazon Redshift automatically deletes it. If you want to keep an automated snapshot for a longer period, you can make a manual copy of the snapshot. Manual snapshots are retained until you delete them.
For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.copy_cluster_snapshot(
SourceSnapshotIdentifier='string',
SourceSnapshotClusterIdentifier='string',
TargetSnapshotIdentifier='string',
ManualSnapshotRetentionPeriod=123
)
[REQUIRED]
The identifier for the source snapshot.
Constraints:
The identifier of the cluster the source snapshot was created from. This parameter is required if your IAM user has a policy containing a snapshot resource element that specifies anything other than * for the cluster name.
Constraints:
[REQUIRED]
The identifier given to the new manual snapshot.
Constraints:
The number of days that a manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
The default value is -1.
dict
Response Syntax
{
'Snapshot': {
'SnapshotIdentifier': 'string',
'ClusterIdentifier': 'string',
'SnapshotCreateTime': datetime(2015, 1, 1),
'Status': 'string',
'Port': 123,
'AvailabilityZone': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'MasterUsername': 'string',
'ClusterVersion': 'string',
'SnapshotType': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'DBName': 'string',
'VpcId': 'string',
'Encrypted': True|False,
'KmsKeyId': 'string',
'EncryptedWithHSM': True|False,
'AccountsWithRestoreAccess': [
{
'AccountId': 'string',
'AccountAlias': 'string'
},
],
'OwnerAccount': 'string',
'TotalBackupSizeInMegaBytes': 123.0,
'ActualIncrementalBackupSizeInMegaBytes': 123.0,
'BackupProgressInMegaBytes': 123.0,
'CurrentBackupRateInMegaBytesPerSecond': 123.0,
'EstimatedSecondsToCompletion': 123,
'ElapsedTimeInSeconds': 123,
'SourceRegion': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'RestorableNodeTypes': [
'string',
],
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'ManualSnapshotRetentionPeriod': 123,
'ManualSnapshotRemainingDays': 123,
'SnapshotRetentionStartTime': datetime(2015, 1, 1)
}
}
Response Structure
(dict) --
Snapshot (dict) --
Describes a snapshot.
SnapshotIdentifier (string) --
The snapshot identifier that is provided in the request.
ClusterIdentifier (string) --
The identifier of the cluster for which the snapshot was taken.
SnapshotCreateTime (datetime) --
The time (in UTC format) when Amazon Redshift began the snapshot. A snapshot contains a copy of the cluster data as of this exact time.
Status (string) --
The snapshot status. The value of the status depends on the API operation used:
Port (integer) --
The port that the cluster is listening on.
AvailabilityZone (string) --
The Availability Zone in which the cluster was created.
ClusterCreateTime (datetime) --
The time (UTC) when the cluster was originally created.
MasterUsername (string) --
The master user name for the cluster.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
SnapshotType (string) --
The snapshot type. Snapshots created using CreateClusterSnapshot and CopyClusterSnapshot are of type "manual".
NodeType (string) --
The node type of the nodes in the cluster.
NumberOfNodes (integer) --
The number of nodes in the cluster.
DBName (string) --
The name of the database that was created when the cluster was created.
VpcId (string) --
The VPC identifier of the cluster if the snapshot is from a cluster in a VPC. Otherwise, this field is not in the output.
Encrypted (boolean) --
If true , the data in the snapshot is encrypted at rest.
KmsKeyId (string) --
The AWS Key Management Service (KMS) key ID of the encryption key that was used to encrypt data in the cluster from which the snapshot was taken.
EncryptedWithHSM (boolean) --
A boolean that indicates whether the snapshot data is encrypted using the HSM keys of the source cluster. true indicates that the data is encrypted using HSM keys.
AccountsWithRestoreAccess (list) --
A list of the AWS customer accounts authorized to restore the snapshot. Returns null if no accounts are authorized. Visible only to the snapshot owner.
(dict) --
Describes an AWS customer account authorized to restore a snapshot.
AccountId (string) --
The identifier of an AWS customer account authorized to restore a snapshot.
AccountAlias (string) --
The identifier of an AWS support account authorized to restore a snapshot. For AWS support, the identifier is amazon-redshift-support .
OwnerAccount (string) --
For manual snapshots, the AWS customer account used to create or copy the snapshot. For automatic snapshots, the owner of the cluster. The owner can perform all snapshot actions, such as sharing a manual snapshot.
TotalBackupSizeInMegaBytes (float) --
The size of the complete set of backup data that would be used to restore the cluster.
ActualIncrementalBackupSizeInMegaBytes (float) --
The size of the incremental backup.
BackupProgressInMegaBytes (float) --
The number of megabytes that have been transferred to the snapshot backup.
CurrentBackupRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred to the snapshot backup. Returns 0 for a completed backup.
EstimatedSecondsToCompletion (integer) --
The estimate of the time remaining before the snapshot backup will complete. Returns 0 for a completed backup.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress snapshot backup has been running, or the amount of time it took a completed backup to finish.
SourceRegion (string) --
The source region from which the snapshot was copied.
Tags (list) --
The list of tags for the cluster snapshot.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
RestorableNodeTypes (list) --
The list of node types that this cluster snapshot is able to restore into.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track for the snapshot.
ManualSnapshotRetentionPeriod (integer) --
The number of days that a manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
ManualSnapshotRemainingDays (integer) --
The number of days until a manual snapshot will pass its retention period.
SnapshotRetentionStartTime (datetime) --
A timestamp representing the start of the retention period for the snapshot.
Creates a new cluster.
To create a cluster in Virtual Private Cloud (VPC), you must provide a cluster subnet group name. The cluster subnet group identifies the subnets of your VPC that Amazon Redshift uses when creating the cluster. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.create_cluster(
DBName='string',
ClusterIdentifier='string',
ClusterType='string',
NodeType='string',
MasterUsername='string',
MasterUserPassword='string',
ClusterSecurityGroups=[
'string',
],
VpcSecurityGroupIds=[
'string',
],
ClusterSubnetGroupName='string',
AvailabilityZone='string',
PreferredMaintenanceWindow='string',
ClusterParameterGroupName='string',
AutomatedSnapshotRetentionPeriod=123,
ManualSnapshotRetentionPeriod=123,
Port=123,
ClusterVersion='string',
AllowVersionUpgrade=True|False,
NumberOfNodes=123,
PubliclyAccessible=True|False,
Encrypted=True|False,
HsmClientCertificateIdentifier='string',
HsmConfigurationIdentifier='string',
ElasticIp='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
KmsKeyId='string',
EnhancedVpcRouting=True|False,
AdditionalInfo='string',
IamRoles=[
'string',
],
MaintenanceTrackName='string',
SnapshotScheduleIdentifier='string'
)
The name of the first database to be created when the cluster is created.
To create additional databases after the cluster is created, connect to the cluster with a SQL client and use SQL commands to create a database. For more information, go to Create a Database in the Amazon Redshift Database Developer Guide.
Default: dev
Constraints:
[REQUIRED]
A unique identifier for the cluster. You use this identifier to refer to the cluster for any subsequent cluster operations such as deleting or modifying. The identifier also appears in the Amazon Redshift console.
Constraints:
Example: myexamplecluster
The type of the cluster. When cluster type is specified as
Valid Values: multi-node | single-node
Default: multi-node
[REQUIRED]
The node type to be provisioned for the cluster. For information about node types, go to Working with Clusters in the Amazon Redshift Cluster Management Guide .
Valid Values: ds2.xlarge | ds2.8xlarge | ds2.xlarge | ds2.8xlarge | dc1.large | dc1.8xlarge | dc2.large | dc2.8xlarge
[REQUIRED]
The user name associated with the master user account for the cluster that is being created.
Constraints:
[REQUIRED]
The password associated with the master user account for the cluster that is being created.
Constraints:
A list of security groups to be associated with this cluster.
Default: The default cluster security group for Amazon Redshift.
A list of Virtual Private Cloud (VPC) security groups to be associated with the cluster.
Default: The default VPC security group is associated with the cluster.
The name of a cluster subnet group to be associated with this cluster.
If this parameter is not provided the resulting cluster will be deployed outside virtual private cloud (VPC).
The EC2 Availability Zone (AZ) in which you want Amazon Redshift to provision the cluster. For example, if you have several EC2 instances running in a specific Availability Zone, then you might want the cluster to be provisioned in the same zone in order to decrease network latency.
Default: A random, system-chosen Availability Zone in the region that is specified by the endpoint.
Example: us-east-1d
Constraint: The specified Availability Zone must be in the same region as the current endpoint.
The weekly time range (in UTC) during which automated cluster maintenance can occur.
Format: ddd:hh24:mi-ddd:hh24:mi
Default: A 30-minute window selected at random from an 8-hour block of time per region, occurring on a random day of the week. For more information about the time blocks for each region, see Maintenance Windows in Amazon Redshift Cluster Management Guide.
Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun
Constraints: Minimum 30-minute window.
The name of the parameter group to be associated with this cluster.
Default: The default Amazon Redshift cluster parameter group. For information about the default parameter group, go to Working with Amazon Redshift Parameter Groups
Constraints:
The number of days that automated snapshots are retained. If the value is 0, automated snapshots are disabled. Even if automated snapshots are disabled, you can still create manual snapshots when you want with CreateClusterSnapshot .
Default: 1
Constraints: Must be a value from 0 to 35.
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
The port number on which the cluster accepts incoming connections.
The cluster is accessible only via the JDBC and ODBC connection strings. Part of the connection string requires the port on which the cluster will listen for incoming connections.
Default: 5439
Valid Values: 1150-65535
The version of the Amazon Redshift engine software that you want to deploy on the cluster.
The version selected runs on all the nodes in the cluster.
Constraints: Only version 1.0 is currently available.
Example: 1.0
If true , major version upgrades can be applied during the maintenance window to the Amazon Redshift engine that is running on the cluster.
When a new major version of the Amazon Redshift engine is released, you can request that the service automatically apply upgrades during the maintenance window to the Amazon Redshift engine that is running on your cluster.
Default: true
The number of compute nodes in the cluster. This parameter is required when the ClusterType parameter is specified as multi-node .
For information about determining how many nodes you need, go to Working with Clusters in the Amazon Redshift Cluster Management Guide .
If you don't specify this parameter, you get a single-node cluster. When requesting a multi-node cluster, you must specify the number of nodes that you want in the cluster.
Default: 1
Constraints: Value must be at least 1 and no more than 100.
If true , the data in the cluster is encrypted at rest.
Default: false
The Elastic IP (EIP) address for the cluster.
Constraints: The cluster must be provisioned in EC2-VPC and publicly-accessible through an Internet gateway. For more information about provisioning clusters in EC2-VPC, go to Supported Platforms to Launch Your Cluster in the Amazon Redshift Cluster Management Guide.
A list of tag instances.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services. You must supply the IAM roles in their Amazon Resource Name (ARN) format. You can supply up to 10 IAM roles in a single request.
A cluster can have up to 10 IAM roles associated with it at any time.
dict
Response Syntax
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
(dict) --
Cluster (dict) --
Describes a cluster.
ClusterIdentifier (string) --
The unique identifier of the cluster.
NodeType (string) --
The node type for the nodes in the cluster.
ClusterStatus (string) --
The current state of the cluster. Possible values are the following:
ModifyStatus (string) --
The status of a modify operation, if any, initiated for the cluster.
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
DBName (string) --
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the Cluster.
Port (integer) --
The port that the database engine is listening on.
ClusterCreateTime (datetime) --
The date and time that the cluster was created.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
ClusterSecurityGroups (list) --
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
(dict) --
Describes a cluster security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
VpcSecurityGroups (list) --
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
(dict) --
Describes the members of a VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
Status (string) --
The status of the VPC security group.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
(dict) --
Describes the status of a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
ClusterParameterStatusList (list) --
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
(dict) --
Describes the status of a parameter group.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
VpcId (string) --
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
PendingModifiedValues (dict) --
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
MasterUserPassword (string) --
The pending or in-progress change of the master user password for the cluster.
NodeType (string) --
The pending or in-progress change of the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change of the number of nodes in the cluster.
ClusterType (string) --
The pending or in-progress change of the cluster type.
ClusterVersion (string) --
The pending or in-progress change of the service version.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change of the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change of the new identifier for the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change of the ability to connect to the cluster from the public network.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster will change to during the next maintenance window.
EncryptionType (string) --
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
AllowVersionUpgrade (boolean) --
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PubliclyAccessible (boolean) --
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
Encrypted (boolean) --
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
RestoreStatus (dict) --
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
Status (string) --
The status of the restore action. Returns starting, restoring, completed, or failed.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data used to restore the cluster.
ProgressInMegaBytes (integer) --
The number of megabytes that have been transferred from snapshot storage.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
DataTransferProgress (dict) --
Status (string) --
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
CurrentRateInMegaBytesPerSecond (float) --
Describes the data transfer rate in MB's per second.
TotalDataInMegaBytes (integer) --
Describes the total amount of data to be transfered in megabytes.
DataTransferredInMegaBytes (integer) --
Describes the total amount of data that has been transfered in MB's.
EstimatedTimeToCompletionInSeconds (integer) --
Describes the estimated number of seconds remaining to complete the transfer.
ElapsedTimeInSeconds (integer) --
Describes the number of seconds that have elapsed during the data transfer.
HsmStatus (dict) --
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
HsmClientCertificateIdentifier (string) --
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
HsmConfigurationIdentifier (string) --
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
ClusterSnapshotCopyStatus (dict) --
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
DestinationRegion (string) --
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
RetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
ManualSnapshotRetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
The identifier of a node in a cluster.
NodeRole (string) --
Whether the node is a leader node or a compute node.
PrivateIPAddress (string) --
The private IP address of a node within a cluster.
PublicIPAddress (string) --
The public IP address of a node within a cluster.
ElasticIpStatus (dict) --
The status of the elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP (EIP) address for the cluster.
Status (string) --
The status of the elastic IP (EIP) address.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
Tags (list) --
The list of tags for the cluster.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
KmsKeyId (string) --
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
IamRoles (list) --
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
(dict) --
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
IamRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
ApplyStatus (string) --
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
PendingActions (list) --
Cluster operations that are waiting to be started.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can resize the cluster to with the elastic resize method.
DeferredMaintenanceWindows (list) --
Describes a group of DeferredMaintenanceWindow objects.
(dict) --
Describes a deferred maintenance window
DeferMaintenanceIdentifier (string) --
A unique identifier for the maintenance window.
DeferMaintenanceStartTime (datetime) --
A timestamp for the beginning of the time period when we defer maintenance.
DeferMaintenanceEndTime (datetime) --
A timestamp for the end of the time period when we defer maintenance.
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
ResizeInfo (dict) --
Returns the following:
ResizeType (string) --
Returns the value ClassicResize .
AllowCancelResize (boolean) --
A boolean value indicating if the resize operation can be cancelled.
Creates an Amazon Redshift parameter group.
Creating parameter groups is independent of creating clusters. You can associate a cluster with a parameter group when you create the cluster. You can also associate an existing cluster with a parameter group after the cluster is created by using ModifyCluster .
Parameters in the parameter group define specific behavior that applies to the databases you create on the cluster. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.create_cluster_parameter_group(
ParameterGroupName='string',
ParameterGroupFamily='string',
Description='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The name of the cluster parameter group.
Constraints:
Note
This value is stored as a lower-case string.
[REQUIRED]
The Amazon Redshift engine version to which the cluster parameter group applies. The cluster engine version determines the set of parameters.
To get a list of valid parameter group family names, you can call DescribeClusterParameterGroups . By default, Amazon Redshift returns a list of all the parameter groups that are owned by your AWS account, including the default parameter groups for each Amazon Redshift engine version. The parameter group family names associated with the default parameter groups provide you the valid values. For example, a valid family name is "redshift-1.0".
[REQUIRED]
A description of the parameter group.
A list of tag instances.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
dict
Response Syntax
{
'ClusterParameterGroup': {
'ParameterGroupName': 'string',
'ParameterGroupFamily': 'string',
'Description': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
}
Response Structure
(dict) --
ClusterParameterGroup (dict) --
Describes a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterGroupFamily (string) --
The name of the cluster parameter group family that this cluster parameter group is compatible with.
Description (string) --
The description of the parameter group.
Tags (list) --
The list of tags for the cluster parameter group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Creates a new Amazon Redshift security group. You use security groups to control access to non-VPC clusters.
For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.create_cluster_security_group(
ClusterSecurityGroupName='string',
Description='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The name for the security group. Amazon Redshift stores the value as a lowercase string.
Constraints:
Example: examplesecuritygroup
[REQUIRED]
A description for the security group.
A list of tag instances.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
dict
Response Syntax
{
'ClusterSecurityGroup': {
'ClusterSecurityGroupName': 'string',
'Description': 'string',
'EC2SecurityGroups': [
{
'Status': 'string',
'EC2SecurityGroupName': 'string',
'EC2SecurityGroupOwnerId': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'IPRanges': [
{
'Status': 'string',
'CIDRIP': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
}
Response Structure
(dict) --
ClusterSecurityGroup (dict) --
Describes a security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group to which the operation was applied.
Description (string) --
A description of the security group.
EC2SecurityGroups (list) --
A list of EC2 security groups that are permitted to access clusters associated with this cluster security group.
(dict) --
Describes an Amazon EC2 security group.
Status (string) --
The status of the EC2 security group.
EC2SecurityGroupName (string) --
The name of the EC2 Security Group.
EC2SecurityGroupOwnerId (string) --
The AWS ID of the owner of the EC2 security group specified in the EC2SecurityGroupName field.
Tags (list) --
The list of tags for the EC2 security group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
IPRanges (list) --
A list of IP ranges (CIDR blocks) that are permitted to access clusters associated with this cluster security group.
(dict) --
Describes an IP range used in a security group.
Status (string) --
The status of the IP range, for example, "authorized".
CIDRIP (string) --
The IP range in Classless Inter-Domain Routing (CIDR) notation.
Tags (list) --
The list of tags for the IP range.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Tags (list) --
The list of tags for the cluster security group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Creates a manual snapshot of the specified cluster. The cluster must be in the available state.
For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.create_cluster_snapshot(
SnapshotIdentifier='string',
ClusterIdentifier='string',
ManualSnapshotRetentionPeriod=123,
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
A unique identifier for the snapshot that you are requesting. This identifier must be unique for all snapshots within the AWS account.
Constraints:
Example: my-snapshot-id
[REQUIRED]
The cluster identifier for which you want a snapshot.
The number of days that a manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
The default value is -1.
A list of tag instances.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
dict
Response Syntax
{
'Snapshot': {
'SnapshotIdentifier': 'string',
'ClusterIdentifier': 'string',
'SnapshotCreateTime': datetime(2015, 1, 1),
'Status': 'string',
'Port': 123,
'AvailabilityZone': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'MasterUsername': 'string',
'ClusterVersion': 'string',
'SnapshotType': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'DBName': 'string',
'VpcId': 'string',
'Encrypted': True|False,
'KmsKeyId': 'string',
'EncryptedWithHSM': True|False,
'AccountsWithRestoreAccess': [
{
'AccountId': 'string',
'AccountAlias': 'string'
},
],
'OwnerAccount': 'string',
'TotalBackupSizeInMegaBytes': 123.0,
'ActualIncrementalBackupSizeInMegaBytes': 123.0,
'BackupProgressInMegaBytes': 123.0,
'CurrentBackupRateInMegaBytesPerSecond': 123.0,
'EstimatedSecondsToCompletion': 123,
'ElapsedTimeInSeconds': 123,
'SourceRegion': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'RestorableNodeTypes': [
'string',
],
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'ManualSnapshotRetentionPeriod': 123,
'ManualSnapshotRemainingDays': 123,
'SnapshotRetentionStartTime': datetime(2015, 1, 1)
}
}
Response Structure
(dict) --
Snapshot (dict) --
Describes a snapshot.
SnapshotIdentifier (string) --
The snapshot identifier that is provided in the request.
ClusterIdentifier (string) --
The identifier of the cluster for which the snapshot was taken.
SnapshotCreateTime (datetime) --
The time (in UTC format) when Amazon Redshift began the snapshot. A snapshot contains a copy of the cluster data as of this exact time.
Status (string) --
The snapshot status. The value of the status depends on the API operation used:
Port (integer) --
The port that the cluster is listening on.
AvailabilityZone (string) --
The Availability Zone in which the cluster was created.
ClusterCreateTime (datetime) --
The time (UTC) when the cluster was originally created.
MasterUsername (string) --
The master user name for the cluster.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
SnapshotType (string) --
The snapshot type. Snapshots created using CreateClusterSnapshot and CopyClusterSnapshot are of type "manual".
NodeType (string) --
The node type of the nodes in the cluster.
NumberOfNodes (integer) --
The number of nodes in the cluster.
DBName (string) --
The name of the database that was created when the cluster was created.
VpcId (string) --
The VPC identifier of the cluster if the snapshot is from a cluster in a VPC. Otherwise, this field is not in the output.
Encrypted (boolean) --
If true , the data in the snapshot is encrypted at rest.
KmsKeyId (string) --
The AWS Key Management Service (KMS) key ID of the encryption key that was used to encrypt data in the cluster from which the snapshot was taken.
EncryptedWithHSM (boolean) --
A boolean that indicates whether the snapshot data is encrypted using the HSM keys of the source cluster. true indicates that the data is encrypted using HSM keys.
AccountsWithRestoreAccess (list) --
A list of the AWS customer accounts authorized to restore the snapshot. Returns null if no accounts are authorized. Visible only to the snapshot owner.
(dict) --
Describes an AWS customer account authorized to restore a snapshot.
AccountId (string) --
The identifier of an AWS customer account authorized to restore a snapshot.
AccountAlias (string) --
The identifier of an AWS support account authorized to restore a snapshot. For AWS support, the identifier is amazon-redshift-support .
OwnerAccount (string) --
For manual snapshots, the AWS customer account used to create or copy the snapshot. For automatic snapshots, the owner of the cluster. The owner can perform all snapshot actions, such as sharing a manual snapshot.
TotalBackupSizeInMegaBytes (float) --
The size of the complete set of backup data that would be used to restore the cluster.
ActualIncrementalBackupSizeInMegaBytes (float) --
The size of the incremental backup.
BackupProgressInMegaBytes (float) --
The number of megabytes that have been transferred to the snapshot backup.
CurrentBackupRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred to the snapshot backup. Returns 0 for a completed backup.
EstimatedSecondsToCompletion (integer) --
The estimate of the time remaining before the snapshot backup will complete. Returns 0 for a completed backup.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress snapshot backup has been running, or the amount of time it took a completed backup to finish.
SourceRegion (string) --
The source region from which the snapshot was copied.
Tags (list) --
The list of tags for the cluster snapshot.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
RestorableNodeTypes (list) --
The list of node types that this cluster snapshot is able to restore into.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track for the snapshot.
ManualSnapshotRetentionPeriod (integer) --
The number of days that a manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
ManualSnapshotRemainingDays (integer) --
The number of days until a manual snapshot will pass its retention period.
SnapshotRetentionStartTime (datetime) --
A timestamp representing the start of the retention period for the snapshot.
Creates a new Amazon Redshift subnet group. You must provide a list of one or more subnets in your existing Amazon Virtual Private Cloud (Amazon VPC) when creating Amazon Redshift subnet group.
For information about subnet groups, go to Amazon Redshift Cluster Subnet Groups in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.create_cluster_subnet_group(
ClusterSubnetGroupName='string',
Description='string',
SubnetIds=[
'string',
],
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The name for the subnet group. Amazon Redshift stores the value as a lowercase string.
Constraints:
Example: examplesubnetgroup
[REQUIRED]
A description for the subnet group.
[REQUIRED]
An array of VPC subnet IDs. A maximum of 20 subnets can be modified in a single request.
A list of tag instances.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
dict
Response Syntax
{
'ClusterSubnetGroup': {
'ClusterSubnetGroupName': 'string',
'Description': 'string',
'VpcId': 'string',
'SubnetGroupStatus': 'string',
'Subnets': [
{
'SubnetIdentifier': 'string',
'SubnetAvailabilityZone': {
'Name': 'string',
'SupportedPlatforms': [
{
'Name': 'string'
},
]
},
'SubnetStatus': 'string'
},
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
}
Response Structure
(dict) --
ClusterSubnetGroup (dict) --
Describes a subnet group.
ClusterSubnetGroupName (string) --
The name of the cluster subnet group.
Description (string) --
The description of the cluster subnet group.
VpcId (string) --
The VPC ID of the cluster subnet group.
SubnetGroupStatus (string) --
The status of the cluster subnet group. Possible values are Complete , Incomplete and Invalid .
Subnets (list) --
A list of the VPC Subnet elements.
(dict) --
Describes a subnet.
SubnetIdentifier (string) --
The identifier of the subnet.
SubnetAvailabilityZone (dict) --
Name (string) --
The name of the availability zone.
SupportedPlatforms (list) --
(dict) --
A list of supported platforms for orderable clusters.
SubnetStatus (string) --
The status of the subnet.
Tags (list) --
The list of tags for the cluster subnet group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Creates an Amazon Redshift event notification subscription. This action requires an ARN (Amazon Resource Name) of an Amazon SNS topic created by either the Amazon Redshift console, the Amazon SNS console, or the Amazon SNS API. To obtain an ARN with Amazon SNS, you must create a topic in Amazon SNS and subscribe to the topic. The ARN is displayed in the SNS console.
You can specify the source type, and lists of Amazon Redshift source IDs, event categories, and event severities. Notifications will be sent for all events you want that match those criteria. For example, you can specify source type = cluster, source ID = my-cluster-1 and mycluster2, event categories = Availability, Backup, and severity = ERROR. The subscription will only send notifications for those ERROR events in the Availability and Backup categories for the specified clusters.
If you specify both the source type and source IDs, such as source type = cluster and source identifier = my-cluster-1, notifications will be sent for all the cluster events for my-cluster-1. If you specify a source type but do not specify a source identifier, you will receive notice of the events for the objects of that type in your AWS account. If you do not specify either the SourceType nor the SourceIdentifier, you will be notified of events generated from all Amazon Redshift sources belonging to your AWS account. You must specify a source type if you specify a source ID.
See also: AWS API Documentation
Request Syntax
response = client.create_event_subscription(
SubscriptionName='string',
SnsTopicArn='string',
SourceType='string',
SourceIds=[
'string',
],
EventCategories=[
'string',
],
Severity='string',
Enabled=True|False,
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The name of the event subscription to be created.
Constraints:
[REQUIRED]
The Amazon Resource Name (ARN) of the Amazon SNS topic used to transmit the event notifications. The ARN is created by Amazon SNS when you create a topic and subscribe to it.
The type of source that will be generating the events. For example, if you want to be notified of events generated by a cluster, you would set this parameter to cluster. If this value is not specified, events are returned for all Amazon Redshift objects in your AWS account. You must specify a source type in order to specify source IDs.
Valid values: cluster, cluster-parameter-group, cluster-security-group, and cluster-snapshot.
A list of one or more identifiers of Amazon Redshift source objects. All of the objects must be of the same type as was specified in the source type parameter. The event subscription will return only events generated by the specified objects. If not specified, then events are returned for all objects within the source type specified.
Example: my-cluster-1, my-cluster-2
Example: my-snapshot-20131010
Specifies the Amazon Redshift event categories to be published by the event notification subscription.
Values: configuration, management, monitoring, security
Specifies the Amazon Redshift event severity to be published by the event notification subscription.
Values: ERROR, INFO
A list of tag instances.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
dict
Response Syntax
{
'EventSubscription': {
'CustomerAwsId': 'string',
'CustSubscriptionId': 'string',
'SnsTopicArn': 'string',
'Status': 'string',
'SubscriptionCreationTime': datetime(2015, 1, 1),
'SourceType': 'string',
'SourceIdsList': [
'string',
],
'EventCategoriesList': [
'string',
],
'Severity': 'string',
'Enabled': True|False,
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
}
Response Structure
(dict) --
EventSubscription (dict) --
Describes event subscriptions.
CustomerAwsId (string) --
The AWS customer account associated with the Amazon Redshift event notification subscription.
CustSubscriptionId (string) --
The name of the Amazon Redshift event notification subscription.
SnsTopicArn (string) --
The Amazon Resource Name (ARN) of the Amazon SNS topic used by the event notification subscription.
Status (string) --
The status of the Amazon Redshift event notification subscription.
Constraints:
SubscriptionCreationTime (datetime) --
The date and time the Amazon Redshift event notification subscription was created.
SourceType (string) --
The source type of the events returned the Amazon Redshift event notification, such as cluster, or cluster-snapshot.
SourceIdsList (list) --
A list of the sources that publish events to the Amazon Redshift event notification subscription.
EventCategoriesList (list) --
The list of Amazon Redshift event categories specified in the event notification subscription.
Values: Configuration, Management, Monitoring, Security
Severity (string) --
The event severity specified in the Amazon Redshift event notification subscription.
Values: ERROR, INFO
Enabled (boolean) --
A boolean value indicating whether the subscription is enabled; true indicates that the subscription is enabled.
Tags (list) --
The list of tags for the event subscription.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Creates an HSM client certificate that an Amazon Redshift cluster will use to connect to the client's HSM in order to store and retrieve the keys used to encrypt the cluster databases.
The command returns a public key, which you must store in the HSM. In addition to creating the HSM certificate, you must create an Amazon Redshift HSM configuration that provides a cluster the information needed to store and use encryption keys in the HSM. For more information, go to Hardware Security Modules in the Amazon Redshift Cluster Management Guide.
See also: AWS API Documentation
Request Syntax
response = client.create_hsm_client_certificate(
HsmClientCertificateIdentifier='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The identifier to be assigned to the new HSM client certificate that the cluster will use to connect to the HSM to use the database encryption keys.
A list of tag instances.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
dict
Response Syntax
{
'HsmClientCertificate': {
'HsmClientCertificateIdentifier': 'string',
'HsmClientCertificatePublicKey': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
}
Response Structure
(dict) --
HsmClientCertificate (dict) --
Returns information about an HSM client certificate. The certificate is stored in a secure Hardware Storage Module (HSM), and used by the Amazon Redshift cluster to encrypt data files.
HsmClientCertificateIdentifier (string) --
The identifier of the HSM client certificate.
HsmClientCertificatePublicKey (string) --
The public key that the Amazon Redshift cluster will use to connect to the HSM. You must register the public key in the HSM.
Tags (list) --
The list of tags for the HSM client certificate.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Creates an HSM configuration that contains the information required by an Amazon Redshift cluster to store and use database encryption keys in a Hardware Security Module (HSM). After creating the HSM configuration, you can specify it as a parameter when creating a cluster. The cluster will then store its encryption keys in the HSM.
In addition to creating an HSM configuration, you must also create an HSM client certificate. For more information, go to Hardware Security Modules in the Amazon Redshift Cluster Management Guide.
See also: AWS API Documentation
Request Syntax
response = client.create_hsm_configuration(
HsmConfigurationIdentifier='string',
Description='string',
HsmIpAddress='string',
HsmPartitionName='string',
HsmPartitionPassword='string',
HsmServerPublicCertificate='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The identifier to be assigned to the new Amazon Redshift HSM configuration.
[REQUIRED]
A text description of the HSM configuration to be created.
[REQUIRED]
The IP address that the Amazon Redshift cluster must use to access the HSM.
[REQUIRED]
The name of the partition in the HSM where the Amazon Redshift clusters will store their database encryption keys.
[REQUIRED]
The password required to access the HSM partition.
[REQUIRED]
The HSMs public certificate file. When using Cloud HSM, the file name is server.pem.
A list of tag instances.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
dict
Response Syntax
{
'HsmConfiguration': {
'HsmConfigurationIdentifier': 'string',
'Description': 'string',
'HsmIpAddress': 'string',
'HsmPartitionName': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
}
Response Structure
(dict) --
HsmConfiguration (dict) --
Returns information about an HSM configuration, which is an object that describes to Amazon Redshift clusters the information they require to connect to an HSM where they can store database encryption keys.
HsmConfigurationIdentifier (string) --
The name of the Amazon Redshift HSM configuration.
Description (string) --
A text description of the HSM configuration.
HsmIpAddress (string) --
The IP address that the Amazon Redshift cluster must use to access the HSM.
HsmPartitionName (string) --
The name of the partition in the HSM where the Amazon Redshift clusters will store their database encryption keys.
Tags (list) --
The list of tags for the HSM configuration.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Creates a snapshot copy grant that permits Amazon Redshift to use a customer master key (CMK) from AWS Key Management Service (AWS KMS) to encrypt copied snapshots in a destination region.
For more information about managing snapshot copy grants, go to Amazon Redshift Database Encryption in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.create_snapshot_copy_grant(
SnapshotCopyGrantName='string',
KmsKeyId='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The name of the snapshot copy grant. This name must be unique in the region for the AWS account.
Constraints:
A list of tag instances.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
dict
Response Syntax
{
'SnapshotCopyGrant': {
'SnapshotCopyGrantName': 'string',
'KmsKeyId': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
}
Response Structure
(dict) --
SnapshotCopyGrant (dict) --
The snapshot copy grant that grants Amazon Redshift permission to encrypt copied snapshots with the specified customer master key (CMK) from AWS KMS in the destination region.
For more information about managing snapshot copy grants, go to Amazon Redshift Database Encryption in the Amazon Redshift Cluster Management Guide .
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
KmsKeyId (string) --
The unique identifier of the customer master key (CMK) in AWS KMS to which Amazon Redshift is granted permission.
Tags (list) --
A list of tag instances.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Creates a new snapshot schedule.
See also: AWS API Documentation
Request Syntax
response = client.create_snapshot_schedule(
ScheduleDefinitions=[
'string',
],
ScheduleIdentifier='string',
ScheduleDescription='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
DryRun=True|False,
NextInvocations=123
)
The definition of the snapshot schedule. The definition is made up of schedule expressions, for example "cron(30 12 *)" or "rate(12 hours)".
An optional set of tags you can use to search for the schedule.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
dict
Response Syntax
{
'ScheduleDefinitions': [
'string',
],
'ScheduleIdentifier': 'string',
'ScheduleDescription': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'NextInvocations': [
datetime(2015, 1, 1),
],
'AssociatedClusterCount': 123,
'AssociatedClusters': [
{
'ClusterIdentifier': 'string',
'ScheduleAssociationState': 'MODIFYING'|'ACTIVE'|'FAILED'
},
]
}
Response Structure
(dict) --
Describes a snapshot schedule. You can set a regular interval for creating snapshots of a cluster. You can also schedule snapshots for specific dates.
ScheduleDefinitions (list) --
A list of ScheduleDefinitions.
ScheduleIdentifier (string) --
A unique identifier for the schedule.
ScheduleDescription (string) --
The description of the schedule.
Tags (list) --
An optional set of tags describing the schedule.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
NextInvocations (list) --
AssociatedClusterCount (integer) --
The number of clusters associated with the schedule.
AssociatedClusters (list) --
A list of clusters associated with the schedule. A maximum of 100 clusters is returned.
Adds one or more tags to a specified resource.
A resource can have up to 50 tags. If you try to create more than 50 tags for a resource, you will receive an error and the attempt will fail.
If you specify a key that already exists for the resource, the value for that key will be updated with the new value.
See also: AWS API Documentation
Request Syntax
response = client.create_tags(
ResourceName='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
[REQUIRED]
The Amazon Resource Name (ARN) to which you want to add the tag or tags. For example, arn:aws:redshift:us-east-1:123456789:cluster:t1 .
[REQUIRED]
One or more name/value pairs to add as tags to the specified resource. Each tag name is passed in with the parameter Key and the corresponding value is passed in with the parameter Value . The Key and Value parameters are separated by a comma (,). Separate multiple tags with a space. For example, --tags "Key"="owner","Value"="admin" "Key"="environment","Value"="test" "Key"="version","Value"="1.0" .
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
None
Deletes a previously provisioned cluster. A successful response from the web service indicates that the request was received correctly. Use DescribeClusters to monitor the status of the deletion. The delete operation cannot be canceled or reverted once submitted. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide .
If you want to shut down the cluster and retain it for future use, set SkipFinalClusterSnapshot to false and specify a name for FinalClusterSnapshotIdentifier . You can later restore this snapshot to resume using the cluster. If a final cluster snapshot is requested, the status of the cluster will be "final-snapshot" while the snapshot is being taken, then it's "deleting" once Amazon Redshift begins deleting the cluster.
For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.delete_cluster(
ClusterIdentifier='string',
SkipFinalClusterSnapshot=True|False,
FinalClusterSnapshotIdentifier='string',
FinalClusterSnapshotRetentionPeriod=123
)
[REQUIRED]
The identifier of the cluster to be deleted.
Constraints:
Determines whether a final snapshot of the cluster is created before Amazon Redshift deletes the cluster. If true , a final cluster snapshot is not created. If false , a final cluster snapshot is created before the cluster is deleted.
Note
The FinalClusterSnapshotIdentifier parameter must be specified if SkipFinalClusterSnapshot is false .
Default: false
The identifier of the final snapshot that is to be created immediately before deleting the cluster. If this parameter is provided, SkipFinalClusterSnapshot must be false .
Constraints:
The number of days that a manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
The default value is -1.
dict
Response Syntax
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
(dict) --
Cluster (dict) --
Describes a cluster.
ClusterIdentifier (string) --
The unique identifier of the cluster.
NodeType (string) --
The node type for the nodes in the cluster.
ClusterStatus (string) --
The current state of the cluster. Possible values are the following:
ModifyStatus (string) --
The status of a modify operation, if any, initiated for the cluster.
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
DBName (string) --
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the Cluster.
Port (integer) --
The port that the database engine is listening on.
ClusterCreateTime (datetime) --
The date and time that the cluster was created.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
ClusterSecurityGroups (list) --
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
(dict) --
Describes a cluster security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
VpcSecurityGroups (list) --
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
(dict) --
Describes the members of a VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
Status (string) --
The status of the VPC security group.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
(dict) --
Describes the status of a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
ClusterParameterStatusList (list) --
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
(dict) --
Describes the status of a parameter group.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
VpcId (string) --
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
PendingModifiedValues (dict) --
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
MasterUserPassword (string) --
The pending or in-progress change of the master user password for the cluster.
NodeType (string) --
The pending or in-progress change of the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change of the number of nodes in the cluster.
ClusterType (string) --
The pending or in-progress change of the cluster type.
ClusterVersion (string) --
The pending or in-progress change of the service version.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change of the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change of the new identifier for the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change of the ability to connect to the cluster from the public network.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster will change to during the next maintenance window.
EncryptionType (string) --
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
AllowVersionUpgrade (boolean) --
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PubliclyAccessible (boolean) --
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
Encrypted (boolean) --
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
RestoreStatus (dict) --
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
Status (string) --
The status of the restore action. Returns starting, restoring, completed, or failed.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data used to restore the cluster.
ProgressInMegaBytes (integer) --
The number of megabytes that have been transferred from snapshot storage.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
DataTransferProgress (dict) --
Status (string) --
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
CurrentRateInMegaBytesPerSecond (float) --
Describes the data transfer rate in MB's per second.
TotalDataInMegaBytes (integer) --
Describes the total amount of data to be transfered in megabytes.
DataTransferredInMegaBytes (integer) --
Describes the total amount of data that has been transfered in MB's.
EstimatedTimeToCompletionInSeconds (integer) --
Describes the estimated number of seconds remaining to complete the transfer.
ElapsedTimeInSeconds (integer) --
Describes the number of seconds that have elapsed during the data transfer.
HsmStatus (dict) --
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
HsmClientCertificateIdentifier (string) --
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
HsmConfigurationIdentifier (string) --
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
ClusterSnapshotCopyStatus (dict) --
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
DestinationRegion (string) --
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
RetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
ManualSnapshotRetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
The identifier of a node in a cluster.
NodeRole (string) --
Whether the node is a leader node or a compute node.
PrivateIPAddress (string) --
The private IP address of a node within a cluster.
PublicIPAddress (string) --
The public IP address of a node within a cluster.
ElasticIpStatus (dict) --
The status of the elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP (EIP) address for the cluster.
Status (string) --
The status of the elastic IP (EIP) address.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
Tags (list) --
The list of tags for the cluster.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
KmsKeyId (string) --
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
IamRoles (list) --
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
(dict) --
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
IamRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
ApplyStatus (string) --
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
PendingActions (list) --
Cluster operations that are waiting to be started.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can resize the cluster to with the elastic resize method.
DeferredMaintenanceWindows (list) --
Describes a group of DeferredMaintenanceWindow objects.
(dict) --
Describes a deferred maintenance window
DeferMaintenanceIdentifier (string) --
A unique identifier for the maintenance window.
DeferMaintenanceStartTime (datetime) --
A timestamp for the beginning of the time period when we defer maintenance.
DeferMaintenanceEndTime (datetime) --
A timestamp for the end of the time period when we defer maintenance.
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
ResizeInfo (dict) --
Returns the following:
ResizeType (string) --
Returns the value ClassicResize .
AllowCancelResize (boolean) --
A boolean value indicating if the resize operation can be cancelled.
Deletes a specified Amazon Redshift parameter group.
Note
You cannot delete a parameter group if it is associated with a cluster.
See also: AWS API Documentation
Request Syntax
response = client.delete_cluster_parameter_group(
ParameterGroupName='string'
)
[REQUIRED]
The name of the parameter group to be deleted.
Constraints:
Deletes an Amazon Redshift security group.
Note
You cannot delete a security group that is associated with any clusters. You cannot delete the default security group.
For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.delete_cluster_security_group(
ClusterSecurityGroupName='string'
)
[REQUIRED]
The name of the cluster security group to be deleted.
Deletes the specified manual snapshot. The snapshot must be in the available state, with no other users authorized to access the snapshot.
Unlike automated snapshots, manual snapshots are retained even after you delete your cluster. Amazon Redshift does not delete your manual snapshots. You must delete manual snapshot explicitly to avoid getting charged. If other accounts are authorized to access the snapshot, you must revoke all of the authorizations before you can delete the snapshot.
See also: AWS API Documentation
Request Syntax
response = client.delete_cluster_snapshot(
SnapshotIdentifier='string',
SnapshotClusterIdentifier='string'
)
[REQUIRED]
The unique identifier of the manual snapshot to be deleted.
Constraints: Must be the name of an existing snapshot that is in the available , failed , or cancelled state.
The unique identifier of the cluster the snapshot was created from. This parameter is required if your IAM user has a policy containing a snapshot resource element that specifies anything other than * for the cluster name.
Constraints: Must be the name of valid cluster.
dict
Response Syntax
{
'Snapshot': {
'SnapshotIdentifier': 'string',
'ClusterIdentifier': 'string',
'SnapshotCreateTime': datetime(2015, 1, 1),
'Status': 'string',
'Port': 123,
'AvailabilityZone': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'MasterUsername': 'string',
'ClusterVersion': 'string',
'SnapshotType': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'DBName': 'string',
'VpcId': 'string',
'Encrypted': True|False,
'KmsKeyId': 'string',
'EncryptedWithHSM': True|False,
'AccountsWithRestoreAccess': [
{
'AccountId': 'string',
'AccountAlias': 'string'
},
],
'OwnerAccount': 'string',
'TotalBackupSizeInMegaBytes': 123.0,
'ActualIncrementalBackupSizeInMegaBytes': 123.0,
'BackupProgressInMegaBytes': 123.0,
'CurrentBackupRateInMegaBytesPerSecond': 123.0,
'EstimatedSecondsToCompletion': 123,
'ElapsedTimeInSeconds': 123,
'SourceRegion': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'RestorableNodeTypes': [
'string',
],
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'ManualSnapshotRetentionPeriod': 123,
'ManualSnapshotRemainingDays': 123,
'SnapshotRetentionStartTime': datetime(2015, 1, 1)
}
}
Response Structure
(dict) --
Snapshot (dict) --
Describes a snapshot.
SnapshotIdentifier (string) --
The snapshot identifier that is provided in the request.
ClusterIdentifier (string) --
The identifier of the cluster for which the snapshot was taken.
SnapshotCreateTime (datetime) --
The time (in UTC format) when Amazon Redshift began the snapshot. A snapshot contains a copy of the cluster data as of this exact time.
Status (string) --
The snapshot status. The value of the status depends on the API operation used:
Port (integer) --
The port that the cluster is listening on.
AvailabilityZone (string) --
The Availability Zone in which the cluster was created.
ClusterCreateTime (datetime) --
The time (UTC) when the cluster was originally created.
MasterUsername (string) --
The master user name for the cluster.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
SnapshotType (string) --
The snapshot type. Snapshots created using CreateClusterSnapshot and CopyClusterSnapshot are of type "manual".
NodeType (string) --
The node type of the nodes in the cluster.
NumberOfNodes (integer) --
The number of nodes in the cluster.
DBName (string) --
The name of the database that was created when the cluster was created.
VpcId (string) --
The VPC identifier of the cluster if the snapshot is from a cluster in a VPC. Otherwise, this field is not in the output.
Encrypted (boolean) --
If true , the data in the snapshot is encrypted at rest.
KmsKeyId (string) --
The AWS Key Management Service (KMS) key ID of the encryption key that was used to encrypt data in the cluster from which the snapshot was taken.
EncryptedWithHSM (boolean) --
A boolean that indicates whether the snapshot data is encrypted using the HSM keys of the source cluster. true indicates that the data is encrypted using HSM keys.
AccountsWithRestoreAccess (list) --
A list of the AWS customer accounts authorized to restore the snapshot. Returns null if no accounts are authorized. Visible only to the snapshot owner.
(dict) --
Describes an AWS customer account authorized to restore a snapshot.
AccountId (string) --
The identifier of an AWS customer account authorized to restore a snapshot.
AccountAlias (string) --
The identifier of an AWS support account authorized to restore a snapshot. For AWS support, the identifier is amazon-redshift-support .
OwnerAccount (string) --
For manual snapshots, the AWS customer account used to create or copy the snapshot. For automatic snapshots, the owner of the cluster. The owner can perform all snapshot actions, such as sharing a manual snapshot.
TotalBackupSizeInMegaBytes (float) --
The size of the complete set of backup data that would be used to restore the cluster.
ActualIncrementalBackupSizeInMegaBytes (float) --
The size of the incremental backup.
BackupProgressInMegaBytes (float) --
The number of megabytes that have been transferred to the snapshot backup.
CurrentBackupRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred to the snapshot backup. Returns 0 for a completed backup.
EstimatedSecondsToCompletion (integer) --
The estimate of the time remaining before the snapshot backup will complete. Returns 0 for a completed backup.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress snapshot backup has been running, or the amount of time it took a completed backup to finish.
SourceRegion (string) --
The source region from which the snapshot was copied.
Tags (list) --
The list of tags for the cluster snapshot.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
RestorableNodeTypes (list) --
The list of node types that this cluster snapshot is able to restore into.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track for the snapshot.
ManualSnapshotRetentionPeriod (integer) --
The number of days that a manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
ManualSnapshotRemainingDays (integer) --
The number of days until a manual snapshot will pass its retention period.
SnapshotRetentionStartTime (datetime) --
A timestamp representing the start of the retention period for the snapshot.
Deletes the specified cluster subnet group.
See also: AWS API Documentation
Request Syntax
response = client.delete_cluster_subnet_group(
ClusterSubnetGroupName='string'
)
[REQUIRED]
The name of the cluster subnet group name to be deleted.
Deletes an Amazon Redshift event notification subscription.
See also: AWS API Documentation
Request Syntax
response = client.delete_event_subscription(
SubscriptionName='string'
)
[REQUIRED]
The name of the Amazon Redshift event notification subscription to be deleted.
Deletes the specified HSM client certificate.
See also: AWS API Documentation
Request Syntax
response = client.delete_hsm_client_certificate(
HsmClientCertificateIdentifier='string'
)
[REQUIRED]
The identifier of the HSM client certificate to be deleted.
Deletes the specified Amazon Redshift HSM configuration.
See also: AWS API Documentation
Request Syntax
response = client.delete_hsm_configuration(
HsmConfigurationIdentifier='string'
)
[REQUIRED]
The identifier of the Amazon Redshift HSM configuration to be deleted.
Deletes the specified snapshot copy grant.
See also: AWS API Documentation
Request Syntax
response = client.delete_snapshot_copy_grant(
SnapshotCopyGrantName='string'
)
[REQUIRED]
The name of the snapshot copy grant to delete.
Deletes a snapshot schedule.
See also: AWS API Documentation
Request Syntax
response = client.delete_snapshot_schedule(
ScheduleIdentifier='string'
)
[REQUIRED]
A unique identifier of the snapshot schedule to delete.
Deletes a tag or tags from a resource. You must provide the ARN of the resource from which you want to delete the tag or tags.
See also: AWS API Documentation
Request Syntax
response = client.delete_tags(
ResourceName='string',
TagKeys=[
'string',
]
)
[REQUIRED]
The Amazon Resource Name (ARN) from which you want to remove the tag or tags. For example, arn:aws:redshift:us-east-1:123456789:cluster:t1 .
[REQUIRED]
The tag key that you want to delete.
None
Returns a list of attributes attached to an account
See also: AWS API Documentation
Request Syntax
response = client.describe_account_attributes(
AttributeNames=[
'string',
]
)
A list of attribute names.
{
'AccountAttributes': [
{
'AttributeName': 'string',
'AttributeValues': [
{
'AttributeValue': 'string'
},
]
},
]
}
Response Structure
A list of attributes assigned to an account.
A name value pair that describes an aspect of an account.
The name of the attribute.
A list of attribute values.
Describes an attribute value.
The value of the attribute.
Returns an array of ClusterDbRevision objects.
See also: AWS API Documentation
Request Syntax
response = client.describe_cluster_db_revisions(
ClusterIdentifier='string',
MaxRecords=123,
Marker='string'
)
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in the marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the marker parameter and retrying the request.
Default: 100
Constraints: minimum 20, maximum 100.
An optional parameter that specifies the starting point for returning a set of response records. When the results of a DescribeClusterDbRevisions request exceed the value specified in MaxRecords , Amazon Redshift returns a value in the marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the marker parameter and retrying the request.
Constraints: You can specify either the ClusterIdentifier parameter, or the marker parameter, but not both.
dict
Response Syntax
{
'Marker': 'string',
'ClusterDbRevisions': [
{
'ClusterIdentifier': 'string',
'CurrentDatabaseRevision': 'string',
'DatabaseRevisionReleaseDate': datetime(2015, 1, 1),
'RevisionTargets': [
{
'DatabaseRevision': 'string',
'Description': 'string',
'DatabaseRevisionReleaseDate': datetime(2015, 1, 1)
},
]
},
]
}
Response Structure
(dict) --
Marker (string) --
A string representing the starting point for the next set of revisions. If a value is returned in a response, you can retrieve the next set of revisions by providing the value in the marker parameter and retrying the command. If the marker field is empty, all revisions have already been returned.
ClusterDbRevisions (list) --
A list of revisions.
(dict) --
Describes a ClusterDbRevision .
ClusterIdentifier (string) --
The unique identifier of the cluster.
CurrentDatabaseRevision (string) --
A string representing the current cluster version.
DatabaseRevisionReleaseDate (datetime) --
The date on which the database revision was released.
RevisionTargets (list) --
A list of RevisionTarget objects, where each object describes the database revision that a cluster can be updated to.
(dict) --
Describes a RevisionTarget .
DatabaseRevision (string) --
A unique string that identifies the version to update the cluster to. You can use this value in ModifyClusterDbRevision .
Description (string) --
A string that describes the changes and features that will be applied to the cluster when it is updated to the corresponding ClusterDbRevision .
DatabaseRevisionReleaseDate (datetime) --
The date on which the database revision was released.
Returns a list of Amazon Redshift parameter groups, including parameter groups you created and the default parameter group. For each parameter group, the response includes the parameter group name, description, and parameter group family name. You can optionally specify a name to retrieve the description of a specific parameter group.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
If you specify both tag keys and tag values in the same request, Amazon Redshift returns all parameter groups that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all parameter groups that have any combination of those values are returned.
If both tag keys and values are omitted from the request, parameter groups are returned regardless of whether they have tag keys or values associated with them.
See also: AWS API Documentation
Request Syntax
response = client.describe_cluster_parameter_groups(
ParameterGroupName='string',
MaxRecords=123,
Marker='string',
TagKeys=[
'string',
],
TagValues=[
'string',
]
)
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
A tag key or keys for which you want to return all matching cluster parameter groups that are associated with the specified key or keys. For example, suppose that you have parameter groups that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the parameter groups that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching cluster parameter groups that are associated with the specified tag value or values. For example, suppose that you have parameter groups that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the parameter groups that have either or both of these tag values associated with them.
dict
Response Syntax
{
'Marker': 'string',
'ParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterGroupFamily': 'string',
'Description': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
]
}
Response Structure
(dict) --
Contains the output from the DescribeClusterParameterGroups action.
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
ParameterGroups (list) --
A list of ClusterParameterGroup instances. Each instance describes one cluster parameter group.
(dict) --
Describes a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterGroupFamily (string) --
The name of the cluster parameter group family that this cluster parameter group is compatible with.
Description (string) --
The description of the parameter group.
Tags (list) --
The list of tags for the cluster parameter group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Returns a detailed list of parameters contained within the specified Amazon Redshift parameter group. For each parameter the response includes information such as parameter name, description, data type, value, whether the parameter value is modifiable, and so on.
You can specify source filter to retrieve parameters of only specific type. For example, to retrieve parameters that were modified by a user action such as from ModifyClusterParameterGroup , you can specify source equal to user .
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.describe_cluster_parameters(
ParameterGroupName='string',
Source='string',
MaxRecords=123,
Marker='string'
)
[REQUIRED]
The name of a cluster parameter group for which to return details.
The parameter types to return. Specify user to show parameters that are different form the default. Similarly, specify engine-default to show parameters that are the same as the default parameter group.
Default: All parameter types returned.
Valid Values: user | engine-default
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
dict
Response Syntax
{
'Parameters': [
{
'ParameterName': 'string',
'ParameterValue': 'string',
'Description': 'string',
'Source': 'string',
'DataType': 'string',
'AllowedValues': 'string',
'ApplyType': 'static'|'dynamic',
'IsModifiable': True|False,
'MinimumEngineVersion': 'string'
},
],
'Marker': 'string'
}
Response Structure
(dict) --
Contains the output from the DescribeClusterParameters action.
Parameters (list) --
A list of Parameter instances. Each instance lists the parameters of one cluster parameter group.
(dict) --
Describes a parameter in a cluster parameter group.
ParameterName (string) --
The name of the parameter.
ParameterValue (string) --
The value of the parameter.
Description (string) --
A description of the parameter.
Source (string) --
The source of the parameter value, such as "engine-default" or "user".
DataType (string) --
The data type of the parameter.
AllowedValues (string) --
The valid range of values for the parameter.
ApplyType (string) --
Specifies how to apply the WLM configuration parameter. Some properties can be applied dynamically, while other properties require that any associated clusters be rebooted for the configuration changes to be applied. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
IsModifiable (boolean) --
If true , the parameter can be modified. Some parameters have security or operational implications that prevent them from being changed.
MinimumEngineVersion (string) --
The earliest engine version to which the parameter can apply.
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
Returns information about Amazon Redshift security groups. If the name of a security group is specified, the response will contain only information about only that security group.
For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide .
If you specify both tag keys and tag values in the same request, Amazon Redshift returns all security groups that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all security groups that have any combination of those values are returned.
If both tag keys and values are omitted from the request, security groups are returned regardless of whether they have tag keys or values associated with them.
See also: AWS API Documentation
Request Syntax
response = client.describe_cluster_security_groups(
ClusterSecurityGroupName='string',
MaxRecords=123,
Marker='string',
TagKeys=[
'string',
],
TagValues=[
'string',
]
)
The name of a cluster security group for which you are requesting details. You can specify either the Marker parameter or a ClusterSecurityGroupName parameter, but not both.
Example: securitygroup1
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
An optional parameter that specifies the starting point to return a set of response records. When the results of a DescribeClusterSecurityGroups request exceed the value specified in MaxRecords , AWS returns a value in the Marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the Marker parameter and retrying the request.
Constraints: You can specify either the ClusterSecurityGroupName parameter or the Marker parameter, but not both.
A tag key or keys for which you want to return all matching cluster security groups that are associated with the specified key or keys. For example, suppose that you have security groups that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the security groups that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching cluster security groups that are associated with the specified tag value or values. For example, suppose that you have security groups that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the security groups that have either or both of these tag values associated with them.
dict
Response Syntax
{
'Marker': 'string',
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Description': 'string',
'EC2SecurityGroups': [
{
'Status': 'string',
'EC2SecurityGroupName': 'string',
'EC2SecurityGroupOwnerId': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'IPRanges': [
{
'Status': 'string',
'CIDRIP': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
]
}
Response Structure
(dict) --
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
ClusterSecurityGroups (list) --
A list of ClusterSecurityGroup instances.
(dict) --
Describes a security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group to which the operation was applied.
Description (string) --
A description of the security group.
EC2SecurityGroups (list) --
A list of EC2 security groups that are permitted to access clusters associated with this cluster security group.
(dict) --
Describes an Amazon EC2 security group.
Status (string) --
The status of the EC2 security group.
EC2SecurityGroupName (string) --
The name of the EC2 Security Group.
EC2SecurityGroupOwnerId (string) --
The AWS ID of the owner of the EC2 security group specified in the EC2SecurityGroupName field.
Tags (list) --
The list of tags for the EC2 security group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
IPRanges (list) --
A list of IP ranges (CIDR blocks) that are permitted to access clusters associated with this cluster security group.
(dict) --
Describes an IP range used in a security group.
Status (string) --
The status of the IP range, for example, "authorized".
CIDRIP (string) --
The IP range in Classless Inter-Domain Routing (CIDR) notation.
Tags (list) --
The list of tags for the IP range.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Tags (list) --
The list of tags for the cluster security group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Returns one or more snapshot objects, which contain metadata about your cluster snapshots. By default, this operation returns information about all snapshots of all clusters that are owned by you AWS customer account. No information is returned for snapshots owned by inactive AWS customer accounts.
If you specify both tag keys and tag values in the same request, Amazon Redshift returns all snapshots that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all snapshots that have any combination of those values are returned. Only snapshots that you own are returned in the response; shared snapshots are not returned with the tag key and tag value request parameters.
If both tag keys and values are omitted from the request, snapshots are returned regardless of whether they have tag keys or values associated with them.
See also: AWS API Documentation
Request Syntax
response = client.describe_cluster_snapshots(
ClusterIdentifier='string',
SnapshotIdentifier='string',
SnapshotType='string',
StartTime=datetime(2015, 1, 1),
EndTime=datetime(2015, 1, 1),
MaxRecords=123,
Marker='string',
OwnerAccount='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
ClusterExists=True|False,
SortingEntities=[
{
'Attribute': 'SOURCE_TYPE'|'TOTAL_SIZE'|'CREATE_TIME',
'SortOrder': 'ASC'|'DESC'
},
]
)
The type of snapshots for which you are requesting information. By default, snapshots of all types are returned.
Valid Values: automated | manual
A value that requests only snapshots created at or after the specified time. The time value is specified in ISO 8601 format. For more information about ISO 8601, go to the ISO8601 Wikipedia page.
Example: 2012-07-16T18:00:00Z
A time value that requests only snapshots created at or before the specified time. The time value is specified in ISO 8601 format. For more information about ISO 8601, go to the ISO8601 Wikipedia page.
Example: 2012-07-16T18:00:00Z
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
A tag key or keys for which you want to return all matching cluster snapshots that are associated with the specified key or keys. For example, suppose that you have snapshots that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the snapshots that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching cluster snapshots that are associated with the specified tag value or values. For example, suppose that you have snapshots that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the snapshots that have either or both of these tag values associated with them.
A value that indicates whether to return snapshots only for an existing cluster. You can perform table-level restore only by using a snapshot of an existing cluster, that is, a cluster that has not been deleted. Values for this parameter work as follows:
Describes a sorting entity
The category for sorting the snapshots.
The order for listing the attributes.
dict
Response Syntax
{
'Marker': 'string',
'Snapshots': [
{
'SnapshotIdentifier': 'string',
'ClusterIdentifier': 'string',
'SnapshotCreateTime': datetime(2015, 1, 1),
'Status': 'string',
'Port': 123,
'AvailabilityZone': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'MasterUsername': 'string',
'ClusterVersion': 'string',
'SnapshotType': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'DBName': 'string',
'VpcId': 'string',
'Encrypted': True|False,
'KmsKeyId': 'string',
'EncryptedWithHSM': True|False,
'AccountsWithRestoreAccess': [
{
'AccountId': 'string',
'AccountAlias': 'string'
},
],
'OwnerAccount': 'string',
'TotalBackupSizeInMegaBytes': 123.0,
'ActualIncrementalBackupSizeInMegaBytes': 123.0,
'BackupProgressInMegaBytes': 123.0,
'CurrentBackupRateInMegaBytesPerSecond': 123.0,
'EstimatedSecondsToCompletion': 123,
'ElapsedTimeInSeconds': 123,
'SourceRegion': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'RestorableNodeTypes': [
'string',
],
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'ManualSnapshotRetentionPeriod': 123,
'ManualSnapshotRemainingDays': 123,
'SnapshotRetentionStartTime': datetime(2015, 1, 1)
},
]
}
Response Structure
(dict) --
Contains the output from the DescribeClusterSnapshots action.
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
Snapshots (list) --
A list of Snapshot instances.
(dict) --
Describes a snapshot.
SnapshotIdentifier (string) --
The snapshot identifier that is provided in the request.
ClusterIdentifier (string) --
The identifier of the cluster for which the snapshot was taken.
SnapshotCreateTime (datetime) --
The time (in UTC format) when Amazon Redshift began the snapshot. A snapshot contains a copy of the cluster data as of this exact time.
Status (string) --
The snapshot status. The value of the status depends on the API operation used:
Port (integer) --
The port that the cluster is listening on.
AvailabilityZone (string) --
The Availability Zone in which the cluster was created.
ClusterCreateTime (datetime) --
The time (UTC) when the cluster was originally created.
MasterUsername (string) --
The master user name for the cluster.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
SnapshotType (string) --
The snapshot type. Snapshots created using CreateClusterSnapshot and CopyClusterSnapshot are of type "manual".
NodeType (string) --
The node type of the nodes in the cluster.
NumberOfNodes (integer) --
The number of nodes in the cluster.
DBName (string) --
The name of the database that was created when the cluster was created.
VpcId (string) --
The VPC identifier of the cluster if the snapshot is from a cluster in a VPC. Otherwise, this field is not in the output.
Encrypted (boolean) --
If true , the data in the snapshot is encrypted at rest.
KmsKeyId (string) --
The AWS Key Management Service (KMS) key ID of the encryption key that was used to encrypt data in the cluster from which the snapshot was taken.
EncryptedWithHSM (boolean) --
A boolean that indicates whether the snapshot data is encrypted using the HSM keys of the source cluster. true indicates that the data is encrypted using HSM keys.
AccountsWithRestoreAccess (list) --
A list of the AWS customer accounts authorized to restore the snapshot. Returns null if no accounts are authorized. Visible only to the snapshot owner.
(dict) --
Describes an AWS customer account authorized to restore a snapshot.
AccountId (string) --
The identifier of an AWS customer account authorized to restore a snapshot.
AccountAlias (string) --
The identifier of an AWS support account authorized to restore a snapshot. For AWS support, the identifier is amazon-redshift-support .
OwnerAccount (string) --
For manual snapshots, the AWS customer account used to create or copy the snapshot. For automatic snapshots, the owner of the cluster. The owner can perform all snapshot actions, such as sharing a manual snapshot.
TotalBackupSizeInMegaBytes (float) --
The size of the complete set of backup data that would be used to restore the cluster.
ActualIncrementalBackupSizeInMegaBytes (float) --
The size of the incremental backup.
BackupProgressInMegaBytes (float) --
The number of megabytes that have been transferred to the snapshot backup.
CurrentBackupRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred to the snapshot backup. Returns 0 for a completed backup.
EstimatedSecondsToCompletion (integer) --
The estimate of the time remaining before the snapshot backup will complete. Returns 0 for a completed backup.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress snapshot backup has been running, or the amount of time it took a completed backup to finish.
SourceRegion (string) --
The source region from which the snapshot was copied.
Tags (list) --
The list of tags for the cluster snapshot.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
RestorableNodeTypes (list) --
The list of node types that this cluster snapshot is able to restore into.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track for the snapshot.
ManualSnapshotRetentionPeriod (integer) --
The number of days that a manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
ManualSnapshotRemainingDays (integer) --
The number of days until a manual snapshot will pass its retention period.
SnapshotRetentionStartTime (datetime) --
A timestamp representing the start of the retention period for the snapshot.
Returns one or more cluster subnet group objects, which contain metadata about your cluster subnet groups. By default, this operation returns information about all cluster subnet groups that are defined in you AWS account.
If you specify both tag keys and tag values in the same request, Amazon Redshift returns all subnet groups that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all subnet groups that have any combination of those values are returned.
If both tag keys and values are omitted from the request, subnet groups are returned regardless of whether they have tag keys or values associated with them.
See also: AWS API Documentation
Request Syntax
response = client.describe_cluster_subnet_groups(
ClusterSubnetGroupName='string',
MaxRecords=123,
Marker='string',
TagKeys=[
'string',
],
TagValues=[
'string',
]
)
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
A tag key or keys for which you want to return all matching cluster subnet groups that are associated with the specified key or keys. For example, suppose that you have subnet groups that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the subnet groups that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching cluster subnet groups that are associated with the specified tag value or values. For example, suppose that you have subnet groups that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the subnet groups that have either or both of these tag values associated with them.
dict
Response Syntax
{
'Marker': 'string',
'ClusterSubnetGroups': [
{
'ClusterSubnetGroupName': 'string',
'Description': 'string',
'VpcId': 'string',
'SubnetGroupStatus': 'string',
'Subnets': [
{
'SubnetIdentifier': 'string',
'SubnetAvailabilityZone': {
'Name': 'string',
'SupportedPlatforms': [
{
'Name': 'string'
},
]
},
'SubnetStatus': 'string'
},
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
]
}
Response Structure
(dict) --
Contains the output from the DescribeClusterSubnetGroups action.
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
ClusterSubnetGroups (list) --
A list of ClusterSubnetGroup instances.
(dict) --
Describes a subnet group.
ClusterSubnetGroupName (string) --
The name of the cluster subnet group.
Description (string) --
The description of the cluster subnet group.
VpcId (string) --
The VPC ID of the cluster subnet group.
SubnetGroupStatus (string) --
The status of the cluster subnet group. Possible values are Complete , Incomplete and Invalid .
Subnets (list) --
A list of the VPC Subnet elements.
(dict) --
Describes a subnet.
SubnetIdentifier (string) --
The identifier of the subnet.
SubnetAvailabilityZone (dict) --
Name (string) --
The name of the availability zone.
SupportedPlatforms (list) --
(dict) --
A list of supported platforms for orderable clusters.
SubnetStatus (string) --
The status of the subnet.
Tags (list) --
The list of tags for the cluster subnet group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Returns a list of all the available maintenance tracks.
See also: AWS API Documentation
Request Syntax
response = client.describe_cluster_tracks(
MaintenanceTrackName='string',
MaxRecords=123,
Marker='string'
)
dict
Response Syntax
{
'MaintenanceTracks': [
{
'MaintenanceTrackName': 'string',
'DatabaseVersion': 'string',
'UpdateTargets': [
{
'MaintenanceTrackName': 'string',
'DatabaseVersion': 'string',
'SupportedOperations': [
{
'OperationName': 'string'
},
]
},
]
},
],
'Marker': 'string'
}
Response Structure
(dict) --
MaintenanceTracks (list) --
A list of maintenance tracks output by the DescribeClusterTracks operation.
(dict) --
Defines a maintenance track that determines which Amazon Redshift version to apply during a maintenance window. If the value for MaintenanceTrack is current , the cluster is updated to the most recently certified maintenance release. If the value is trailing , the cluster is updated to the previously certified maintenance release.
MaintenanceTrackName (string) --
The name of the maintenance track. Possible values are current and trailing .
DatabaseVersion (string) --
The version number for the cluster release.
UpdateTargets (list) --
An array of UpdateTarget objects to update with the maintenance track.
(dict) --
A maintenance track that you can switch the current track to.
MaintenanceTrackName (string) --
The name of the new maintenance track.
DatabaseVersion (string) --
The cluster version for the new maintenance track.
SupportedOperations (list) --
A list of operations supported by the maintenance track.
(dict) --
Describes the operations that are allowed on a maintenance track.
OperationName (string) --
A list of the supported operations.
Marker (string) --
The starting point to return a set of response tracklist records. You can retrieve the next set of response records by providing the returned marker value in the Marker parameter and retrying the request.
Returns descriptions of the available Amazon Redshift cluster versions. You can call this operation even before creating any clusters to learn more about the Amazon Redshift versions. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.describe_cluster_versions(
ClusterVersion='string',
ClusterParameterGroupFamily='string',
MaxRecords=123,
Marker='string'
)
The specific cluster version to return.
Example: 1.0
The name of a specific cluster parameter group family to return details for.
Constraints:
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
dict
Response Syntax
{
'Marker': 'string',
'ClusterVersions': [
{
'ClusterVersion': 'string',
'ClusterParameterGroupFamily': 'string',
'Description': 'string'
},
]
}
Response Structure
(dict) --
Contains the output from the DescribeClusterVersions action.
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
ClusterVersions (list) --
A list of Version elements.
(dict) --
Describes a cluster version, including the parameter group family and description of the version.
ClusterVersion (string) --
The version number used by the cluster.
ClusterParameterGroupFamily (string) --
The name of the cluster parameter group family for the cluster.
Description (string) --
The description of the cluster version.
Returns properties of provisioned clusters including general cluster properties, cluster database properties, maintenance and backup properties, and security and access properties. This operation supports pagination. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide .
If you specify both tag keys and tag values in the same request, Amazon Redshift returns all clusters that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all clusters that have any combination of those values are returned.
If both tag keys and values are omitted from the request, clusters are returned regardless of whether they have tag keys or values associated with them.
See also: AWS API Documentation
Request Syntax
response = client.describe_clusters(
ClusterIdentifier='string',
MaxRecords=123,
Marker='string',
TagKeys=[
'string',
],
TagValues=[
'string',
]
)
The unique identifier of a cluster whose properties you are requesting. This parameter is case sensitive.
The default is that all clusters defined for an account are returned.
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
An optional parameter that specifies the starting point to return a set of response records. When the results of a DescribeClusters request exceed the value specified in MaxRecords , AWS returns a value in the Marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the Marker parameter and retrying the request.
Constraints: You can specify either the ClusterIdentifier parameter or the Marker parameter, but not both.
A tag key or keys for which you want to return all matching clusters that are associated with the specified key or keys. For example, suppose that you have clusters that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the clusters that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching clusters that are associated with the specified tag value or values. For example, suppose that you have clusters that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the clusters that have either or both of these tag values associated with them.
dict
Response Syntax
{
'Marker': 'string',
'Clusters': [
{
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
},
]
}
Response Structure
(dict) --
Contains the output from the DescribeClusters action.
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
Clusters (list) --
A list of Cluster objects, where each object describes one cluster.
(dict) --
Describes a cluster.
ClusterIdentifier (string) --
The unique identifier of the cluster.
NodeType (string) --
The node type for the nodes in the cluster.
ClusterStatus (string) --
The current state of the cluster. Possible values are the following:
ModifyStatus (string) --
The status of a modify operation, if any, initiated for the cluster.
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
DBName (string) --
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the Cluster.
Port (integer) --
The port that the database engine is listening on.
ClusterCreateTime (datetime) --
The date and time that the cluster was created.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
ClusterSecurityGroups (list) --
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
(dict) --
Describes a cluster security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
VpcSecurityGroups (list) --
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
(dict) --
Describes the members of a VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
Status (string) --
The status of the VPC security group.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
(dict) --
Describes the status of a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
ClusterParameterStatusList (list) --
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
(dict) --
Describes the status of a parameter group.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
VpcId (string) --
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
PendingModifiedValues (dict) --
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
MasterUserPassword (string) --
The pending or in-progress change of the master user password for the cluster.
NodeType (string) --
The pending or in-progress change of the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change of the number of nodes in the cluster.
ClusterType (string) --
The pending or in-progress change of the cluster type.
ClusterVersion (string) --
The pending or in-progress change of the service version.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change of the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change of the new identifier for the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change of the ability to connect to the cluster from the public network.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster will change to during the next maintenance window.
EncryptionType (string) --
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
AllowVersionUpgrade (boolean) --
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PubliclyAccessible (boolean) --
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
Encrypted (boolean) --
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
RestoreStatus (dict) --
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
Status (string) --
The status of the restore action. Returns starting, restoring, completed, or failed.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data used to restore the cluster.
ProgressInMegaBytes (integer) --
The number of megabytes that have been transferred from snapshot storage.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
DataTransferProgress (dict) --
Status (string) --
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
CurrentRateInMegaBytesPerSecond (float) --
Describes the data transfer rate in MB's per second.
TotalDataInMegaBytes (integer) --
Describes the total amount of data to be transfered in megabytes.
DataTransferredInMegaBytes (integer) --
Describes the total amount of data that has been transfered in MB's.
EstimatedTimeToCompletionInSeconds (integer) --
Describes the estimated number of seconds remaining to complete the transfer.
ElapsedTimeInSeconds (integer) --
Describes the number of seconds that have elapsed during the data transfer.
HsmStatus (dict) --
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
HsmClientCertificateIdentifier (string) --
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
HsmConfigurationIdentifier (string) --
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
ClusterSnapshotCopyStatus (dict) --
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
DestinationRegion (string) --
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
RetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
ManualSnapshotRetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
The identifier of a node in a cluster.
NodeRole (string) --
Whether the node is a leader node or a compute node.
PrivateIPAddress (string) --
The private IP address of a node within a cluster.
PublicIPAddress (string) --
The public IP address of a node within a cluster.
ElasticIpStatus (dict) --
The status of the elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP (EIP) address for the cluster.
Status (string) --
The status of the elastic IP (EIP) address.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
Tags (list) --
The list of tags for the cluster.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
KmsKeyId (string) --
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
IamRoles (list) --
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
(dict) --
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
IamRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
ApplyStatus (string) --
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
PendingActions (list) --
Cluster operations that are waiting to be started.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can resize the cluster to with the elastic resize method.
DeferredMaintenanceWindows (list) --
Describes a group of DeferredMaintenanceWindow objects.
(dict) --
Describes a deferred maintenance window
DeferMaintenanceIdentifier (string) --
A unique identifier for the maintenance window.
DeferMaintenanceStartTime (datetime) --
A timestamp for the beginning of the time period when we defer maintenance.
DeferMaintenanceEndTime (datetime) --
A timestamp for the end of the time period when we defer maintenance.
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
ResizeInfo (dict) --
Returns the following:
ResizeType (string) --
Returns the value ClassicResize .
AllowCancelResize (boolean) --
A boolean value indicating if the resize operation can be cancelled.
Returns a list of parameter settings for the specified parameter group family.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.describe_default_cluster_parameters(
ParameterGroupFamily='string',
MaxRecords=123,
Marker='string'
)
[REQUIRED]
The name of the cluster parameter group family.
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
dict
Response Syntax
{
'DefaultClusterParameters': {
'ParameterGroupFamily': 'string',
'Marker': 'string',
'Parameters': [
{
'ParameterName': 'string',
'ParameterValue': 'string',
'Description': 'string',
'Source': 'string',
'DataType': 'string',
'AllowedValues': 'string',
'ApplyType': 'static'|'dynamic',
'IsModifiable': True|False,
'MinimumEngineVersion': 'string'
},
]
}
}
Response Structure
(dict) --
DefaultClusterParameters (dict) --
Describes the default cluster parameters for a parameter group family.
ParameterGroupFamily (string) --
The name of the cluster parameter group family to which the engine default parameters apply.
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
Parameters (list) --
The list of cluster default parameters.
(dict) --
Describes a parameter in a cluster parameter group.
ParameterName (string) --
The name of the parameter.
ParameterValue (string) --
The value of the parameter.
Description (string) --
A description of the parameter.
Source (string) --
The source of the parameter value, such as "engine-default" or "user".
DataType (string) --
The data type of the parameter.
AllowedValues (string) --
The valid range of values for the parameter.
ApplyType (string) --
Specifies how to apply the WLM configuration parameter. Some properties can be applied dynamically, while other properties require that any associated clusters be rebooted for the configuration changes to be applied. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
IsModifiable (boolean) --
If true , the parameter can be modified. Some parameters have security or operational implications that prevent them from being changed.
MinimumEngineVersion (string) --
The earliest engine version to which the parameter can apply.
Displays a list of event categories for all event source types, or for a specified source type. For a list of the event categories and source types, go to Amazon Redshift Event Notifications .
See also: AWS API Documentation
Request Syntax
response = client.describe_event_categories(
SourceType='string'
)
The source type, such as cluster or parameter group, to which the described event categories apply.
Valid values: cluster, cluster-snapshot, cluster-parameter-group, and cluster-security-group.
{
'EventCategoriesMapList': [
{
'SourceType': 'string',
'Events': [
{
'EventId': 'string',
'EventCategories': [
'string',
],
'EventDescription': 'string',
'Severity': 'string'
},
]
},
]
}
Response Structure
A list of event categories descriptions.
Describes event categories.
The source type, such as cluster or cluster-snapshot, that the returned categories belong to.
The events in the event category.
Describes event information.
The identifier of an Amazon Redshift event.
The category of an Amazon Redshift event.
The description of an Amazon Redshift event.
The severity of the event.
Values: ERROR, INFO
Lists descriptions of all the Amazon Redshift event notification subscriptions for a customer account. If you specify a subscription name, lists the description for that subscription.
If you specify both tag keys and tag values in the same request, Amazon Redshift returns all event notification subscriptions that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all subscriptions that have any combination of those values are returned.
If both tag keys and values are omitted from the request, subscriptions are returned regardless of whether they have tag keys or values associated with them.
See also: AWS API Documentation
Request Syntax
response = client.describe_event_subscriptions(
SubscriptionName='string',
MaxRecords=123,
Marker='string',
TagKeys=[
'string',
],
TagValues=[
'string',
]
)
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
A tag key or keys for which you want to return all matching event notification subscriptions that are associated with the specified key or keys. For example, suppose that you have subscriptions that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the subscriptions that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching event notification subscriptions that are associated with the specified tag value or values. For example, suppose that you have subscriptions that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the subscriptions that have either or both of these tag values associated with them.
dict
Response Syntax
{
'Marker': 'string',
'EventSubscriptionsList': [
{
'CustomerAwsId': 'string',
'CustSubscriptionId': 'string',
'SnsTopicArn': 'string',
'Status': 'string',
'SubscriptionCreationTime': datetime(2015, 1, 1),
'SourceType': 'string',
'SourceIdsList': [
'string',
],
'EventCategoriesList': [
'string',
],
'Severity': 'string',
'Enabled': True|False,
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
]
}
Response Structure
(dict) --
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
EventSubscriptionsList (list) --
A list of event subscriptions.
(dict) --
Describes event subscriptions.
CustomerAwsId (string) --
The AWS customer account associated with the Amazon Redshift event notification subscription.
CustSubscriptionId (string) --
The name of the Amazon Redshift event notification subscription.
SnsTopicArn (string) --
The Amazon Resource Name (ARN) of the Amazon SNS topic used by the event notification subscription.
Status (string) --
The status of the Amazon Redshift event notification subscription.
Constraints:
SubscriptionCreationTime (datetime) --
The date and time the Amazon Redshift event notification subscription was created.
SourceType (string) --
The source type of the events returned the Amazon Redshift event notification, such as cluster, or cluster-snapshot.
SourceIdsList (list) --
A list of the sources that publish events to the Amazon Redshift event notification subscription.
EventCategoriesList (list) --
The list of Amazon Redshift event categories specified in the event notification subscription.
Values: Configuration, Management, Monitoring, Security
Severity (string) --
The event severity specified in the Amazon Redshift event notification subscription.
Values: ERROR, INFO
Enabled (boolean) --
A boolean value indicating whether the subscription is enabled; true indicates that the subscription is enabled.
Tags (list) --
The list of tags for the event subscription.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Returns events related to clusters, security groups, snapshots, and parameter groups for the past 14 days. Events specific to a particular cluster, security group, snapshot or parameter group can be obtained by providing the name as a parameter. By default, the past hour of events are returned.
See also: AWS API Documentation
Request Syntax
response = client.describe_events(
SourceIdentifier='string',
SourceType='cluster'|'cluster-parameter-group'|'cluster-security-group'|'cluster-snapshot',
StartTime=datetime(2015, 1, 1),
EndTime=datetime(2015, 1, 1),
Duration=123,
MaxRecords=123,
Marker='string'
)
The identifier of the event source for which events will be returned. If this parameter is not specified, then all sources are included in the response.
Constraints:
If SourceIdentifier is supplied, SourceType must also be provided.
The event source to retrieve events for. If no value is specified, all events are returned.
Constraints:
If SourceType is supplied, SourceIdentifier must also be provided.
The beginning of the time interval to retrieve events for, specified in ISO 8601 format. For more information about ISO 8601, go to the ISO8601 Wikipedia page.
Example: 2009-07-08T18:00Z
The end of the time interval for which to retrieve events, specified in ISO 8601 format. For more information about ISO 8601, go to the ISO8601 Wikipedia page.
Example: 2009-07-08T18:00Z
The number of minutes prior to the time of the request for which to retrieve events. For example, if the request is sent at 18:00 and you specify a duration of 60, then only events which have occurred after 17:00 will be returned.
Default: 60
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
dict
Response Syntax
{
'Marker': 'string',
'Events': [
{
'SourceIdentifier': 'string',
'SourceType': 'cluster'|'cluster-parameter-group'|'cluster-security-group'|'cluster-snapshot',
'Message': 'string',
'EventCategories': [
'string',
],
'Severity': 'string',
'Date': datetime(2015, 1, 1),
'EventId': 'string'
},
]
}
Response Structure
(dict) --
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
Events (list) --
A list of Event instances.
(dict) --
Describes an event.
SourceIdentifier (string) --
The identifier for the source of the event.
SourceType (string) --
The source type for this event.
Message (string) --
The text of this event.
EventCategories (list) --
A list of the event categories.
Values: Configuration, Management, Monitoring, Security
Severity (string) --
The severity of the event.
Values: ERROR, INFO
Date (datetime) --
The date and time of the event.
EventId (string) --
The identifier of the event.
Returns information about the specified HSM client certificate. If no certificate ID is specified, returns information about all the HSM certificates owned by your AWS customer account.
If you specify both tag keys and tag values in the same request, Amazon Redshift returns all HSM client certificates that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all HSM client certificates that have any combination of those values are returned.
If both tag keys and values are omitted from the request, HSM client certificates are returned regardless of whether they have tag keys or values associated with them.
See also: AWS API Documentation
Request Syntax
response = client.describe_hsm_client_certificates(
HsmClientCertificateIdentifier='string',
MaxRecords=123,
Marker='string',
TagKeys=[
'string',
],
TagValues=[
'string',
]
)
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
A tag key or keys for which you want to return all matching HSM client certificates that are associated with the specified key or keys. For example, suppose that you have HSM client certificates that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the HSM client certificates that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching HSM client certificates that are associated with the specified tag value or values. For example, suppose that you have HSM client certificates that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the HSM client certificates that have either or both of these tag values associated with them.
dict
Response Syntax
{
'Marker': 'string',
'HsmClientCertificates': [
{
'HsmClientCertificateIdentifier': 'string',
'HsmClientCertificatePublicKey': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
]
}
Response Structure
(dict) --
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
HsmClientCertificates (list) --
A list of the identifiers for one or more HSM client certificates used by Amazon Redshift clusters to store and retrieve database encryption keys in an HSM.
(dict) --
Returns information about an HSM client certificate. The certificate is stored in a secure Hardware Storage Module (HSM), and used by the Amazon Redshift cluster to encrypt data files.
HsmClientCertificateIdentifier (string) --
The identifier of the HSM client certificate.
HsmClientCertificatePublicKey (string) --
The public key that the Amazon Redshift cluster will use to connect to the HSM. You must register the public key in the HSM.
Tags (list) --
The list of tags for the HSM client certificate.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Returns information about the specified Amazon Redshift HSM configuration. If no configuration ID is specified, returns information about all the HSM configurations owned by your AWS customer account.
If you specify both tag keys and tag values in the same request, Amazon Redshift returns all HSM connections that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all HSM connections that have any combination of those values are returned.
If both tag keys and values are omitted from the request, HSM connections are returned regardless of whether they have tag keys or values associated with them.
See also: AWS API Documentation
Request Syntax
response = client.describe_hsm_configurations(
HsmConfigurationIdentifier='string',
MaxRecords=123,
Marker='string',
TagKeys=[
'string',
],
TagValues=[
'string',
]
)
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
A tag key or keys for which you want to return all matching HSM configurations that are associated with the specified key or keys. For example, suppose that you have HSM configurations that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the HSM configurations that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching HSM configurations that are associated with the specified tag value or values. For example, suppose that you have HSM configurations that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the HSM configurations that have either or both of these tag values associated with them.
dict
Response Syntax
{
'Marker': 'string',
'HsmConfigurations': [
{
'HsmConfigurationIdentifier': 'string',
'Description': 'string',
'HsmIpAddress': 'string',
'HsmPartitionName': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
]
}
Response Structure
(dict) --
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
HsmConfigurations (list) --
A list of HsmConfiguration objects.
(dict) --
Returns information about an HSM configuration, which is an object that describes to Amazon Redshift clusters the information they require to connect to an HSM where they can store database encryption keys.
HsmConfigurationIdentifier (string) --
The name of the Amazon Redshift HSM configuration.
Description (string) --
A text description of the HSM configuration.
HsmIpAddress (string) --
The IP address that the Amazon Redshift cluster must use to access the HSM.
HsmPartitionName (string) --
The name of the partition in the HSM where the Amazon Redshift clusters will store their database encryption keys.
Tags (list) --
The list of tags for the HSM configuration.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Describes whether information, such as queries and connection attempts, is being logged for the specified Amazon Redshift cluster.
See also: AWS API Documentation
Request Syntax
response = client.describe_logging_status(
ClusterIdentifier='string'
)
[REQUIRED]
The identifier of the cluster from which to get the logging status.
Example: examplecluster
{
'LoggingEnabled': True|False,
'BucketName': 'string',
'S3KeyPrefix': 'string',
'LastSuccessfulDeliveryTime': datetime(2015, 1, 1),
'LastFailureTime': datetime(2015, 1, 1),
'LastFailureMessage': 'string'
}
Response Structure
Describes the status of logging for a cluster.
true if logging is on, false if logging is off.
The name of the S3 bucket where the log files are stored.
The prefix applied to the log file names.
The last time that logs were delivered.
The last time when logs failed to be delivered.
The message indicating that logs failed to be delivered.
Returns a list of orderable cluster options. Before you create a new cluster you can use this operation to find what options are available, such as the EC2 Availability Zones (AZ) in the specific AWS Region that you can specify, and the node types you can request. The node types differ by available storage, memory, CPU and price. With the cost involved you might want to obtain a list of cluster options in the specific region and specify values when creating a cluster. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.describe_orderable_cluster_options(
ClusterVersion='string',
NodeType='string',
MaxRecords=123,
Marker='string'
)
The version filter value. Specify this parameter to show only the available offerings matching the specified version.
Default: All versions.
Constraints: Must be one of the version returned from DescribeClusterVersions .
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
dict
Response Syntax
{
'OrderableClusterOptions': [
{
'ClusterVersion': 'string',
'ClusterType': 'string',
'NodeType': 'string',
'AvailabilityZones': [
{
'Name': 'string',
'SupportedPlatforms': [
{
'Name': 'string'
},
]
},
]
},
],
'Marker': 'string'
}
Response Structure
(dict) --
Contains the output from the DescribeOrderableClusterOptions action.
OrderableClusterOptions (list) --
An OrderableClusterOption structure containing information about orderable options for the cluster.
(dict) --
Describes an orderable cluster option.
ClusterVersion (string) --
The version of the orderable cluster.
ClusterType (string) --
The cluster type, for example multi-node .
NodeType (string) --
The node type for the orderable cluster.
AvailabilityZones (list) --
A list of availability zones for the orderable cluster.
(dict) --
Describes an availability zone.
Name (string) --
The name of the availability zone.
SupportedPlatforms (list) --
(dict) --
A list of supported platforms for orderable clusters.
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
Returns a list of the available reserved node offerings by Amazon Redshift with their descriptions including the node type, the fixed and recurring costs of reserving the node and duration the node will be reserved for you. These descriptions help you determine which reserve node offering you want to purchase. You then use the unique offering ID in you call to PurchaseReservedNodeOffering to reserve one or more nodes for your Amazon Redshift cluster.
For more information about reserved node offerings, go to Purchasing Reserved Nodes in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.describe_reserved_node_offerings(
ReservedNodeOfferingId='string',
MaxRecords=123,
Marker='string'
)
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
dict
Response Syntax
{
'Marker': 'string',
'ReservedNodeOfferings': [
{
'ReservedNodeOfferingId': 'string',
'NodeType': 'string',
'Duration': 123,
'FixedPrice': 123.0,
'UsagePrice': 123.0,
'CurrencyCode': 'string',
'OfferingType': 'string',
'RecurringCharges': [
{
'RecurringChargeAmount': 123.0,
'RecurringChargeFrequency': 'string'
},
],
'ReservedNodeOfferingType': 'Regular'|'Upgradable'
},
]
}
Response Structure
(dict) --
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
ReservedNodeOfferings (list) --
A list of ReservedNodeOffering objects.
(dict) --
Describes a reserved node offering.
ReservedNodeOfferingId (string) --
The offering identifier.
NodeType (string) --
The node type offered by the reserved node offering.
Duration (integer) --
The duration, in seconds, for which the offering will reserve the node.
FixedPrice (float) --
The upfront fixed charge you will pay to purchase the specific reserved node offering.
UsagePrice (float) --
The rate you are charged for each hour the cluster that is using the offering is running.
CurrencyCode (string) --
The currency code for the compute nodes offering.
OfferingType (string) --
The anticipated utilization of the reserved node, as defined in the reserved node offering.
RecurringCharges (list) --
The charge to your account regardless of whether you are creating any clusters using the node offering. Recurring charges are only in effect for heavy-utilization reserved nodes.
(dict) --
Describes a recurring charge.
RecurringChargeAmount (float) --
The amount charged per the period of time specified by the recurring charge frequency.
RecurringChargeFrequency (string) --
The frequency at which the recurring charge amount is applied.
ReservedNodeOfferingType (string) --
Returns the descriptions of the reserved nodes.
See also: AWS API Documentation
Request Syntax
response = client.describe_reserved_nodes(
ReservedNodeId='string',
MaxRecords=123,
Marker='string'
)
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
dict
Response Syntax
{
'Marker': 'string',
'ReservedNodes': [
{
'ReservedNodeId': 'string',
'ReservedNodeOfferingId': 'string',
'NodeType': 'string',
'StartTime': datetime(2015, 1, 1),
'Duration': 123,
'FixedPrice': 123.0,
'UsagePrice': 123.0,
'CurrencyCode': 'string',
'NodeCount': 123,
'State': 'string',
'OfferingType': 'string',
'RecurringCharges': [
{
'RecurringChargeAmount': 123.0,
'RecurringChargeFrequency': 'string'
},
],
'ReservedNodeOfferingType': 'Regular'|'Upgradable'
},
]
}
Response Structure
(dict) --
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
ReservedNodes (list) --
The list of ReservedNode objects.
(dict) --
Describes a reserved node. You can call the DescribeReservedNodeOfferings API to obtain the available reserved node offerings.
ReservedNodeId (string) --
The unique identifier for the reservation.
ReservedNodeOfferingId (string) --
The identifier for the reserved node offering.
NodeType (string) --
The node type of the reserved node.
StartTime (datetime) --
The time the reservation started. You purchase a reserved node offering for a duration. This is the start time of that duration.
Duration (integer) --
The duration of the node reservation in seconds.
FixedPrice (float) --
The fixed cost Amazon Redshift charges you for this reserved node.
UsagePrice (float) --
The hourly rate Amazon Redshift charges you for this reserved node.
CurrencyCode (string) --
The currency code for the reserved cluster.
NodeCount (integer) --
The number of reserved compute nodes.
State (string) --
The state of the reserved compute node.
Possible Values:
OfferingType (string) --
The anticipated utilization of the reserved node, as defined in the reserved node offering.
RecurringCharges (list) --
The recurring charges for the reserved node.
(dict) --
Describes a recurring charge.
RecurringChargeAmount (float) --
The amount charged per the period of time specified by the recurring charge frequency.
RecurringChargeFrequency (string) --
The frequency at which the recurring charge amount is applied.
ReservedNodeOfferingType (string) --
Returns information about the last resize operation for the specified cluster. If no resize operation has ever been initiated for the specified cluster, a HTTP 404 error is returned. If a resize operation was initiated and completed, the status of the resize remains as SUCCEEDED until the next resize.
A resize operation can be requested using ModifyCluster and specifying a different number or type of nodes for the cluster.
See also: AWS API Documentation
Request Syntax
response = client.describe_resize(
ClusterIdentifier='string'
)
[REQUIRED]
The unique identifier of a cluster whose resize progress you are requesting. This parameter is case-sensitive.
By default, resize operations for all clusters defined for an AWS account are returned.
{
'TargetNodeType': 'string',
'TargetNumberOfNodes': 123,
'TargetClusterType': 'string',
'Status': 'string',
'ImportTablesCompleted': [
'string',
],
'ImportTablesInProgress': [
'string',
],
'ImportTablesNotStarted': [
'string',
],
'AvgResizeRateInMegaBytesPerSecond': 123.0,
'TotalResizeDataInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ResizeType': 'string',
'Message': 'string',
'TargetEncryptionType': 'string',
'DataTransferProgressPercent': 123.0
}
Response Structure
Describes the result of a cluster resize operation.
The node type that the cluster will have after the resize operation is complete.
The number of nodes that the cluster will have after the resize operation is complete.
The cluster type after the resize operation is complete.
Valid Values: multi-node | single-node
The status of the resize operation.
Valid Values: NONE | IN_PROGRESS | FAILED | SUCCEEDED | CANCELLING
The names of tables that have been completely imported .
Valid Values: List of table names.
The names of tables that are being currently imported.
Valid Values: List of table names.
The names of tables that have not been yet imported.
Valid Values: List of table names
The average rate of the resize operation over the last few minutes, measured in megabytes per second. After the resize operation completes, this value shows the average rate of the entire resize operation.
The estimated total amount of data, in megabytes, on the cluster before the resize operation began.
While the resize operation is in progress, this value shows the current amount of data, in megabytes, that has been processed so far. When the resize operation is complete, this value shows the total amount of data, in megabytes, on the cluster, which may be more or less than TotalResizeDataInMegaBytes (the estimated total amount of data before resize).
The amount of seconds that have elapsed since the resize operation began. After the resize operation completes, this value shows the total actual time, in seconds, for the resize operation.
The estimated time remaining, in seconds, until the resize operation is complete. This value is calculated based on the average resize rate and the estimated amount of data remaining to be processed. Once the resize operation is complete, this value will be 0.
An enum with possible values of ClassicResize and ElasticResize . These values describe the type of resize operation being performed.
An optional string to provide additional details about the resize action.
The type of encryption for the cluster after the resize is complete.
Possible values are KMS and None . In the China region possible values are: Legacy and None .
The percent of data transferred from source cluster to target cluster.
Returns a list of snapshot copy grants owned by the AWS account in the destination region.
For more information about managing snapshot copy grants, go to Amazon Redshift Database Encryption in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.describe_snapshot_copy_grants(
SnapshotCopyGrantName='string',
MaxRecords=123,
Marker='string',
TagKeys=[
'string',
],
TagValues=[
'string',
]
)
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
An optional parameter that specifies the starting point to return a set of response records. When the results of a DescribeSnapshotCopyGrant request exceed the value specified in MaxRecords , AWS returns a value in the Marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the Marker parameter and retrying the request.
Constraints: You can specify either the SnapshotCopyGrantName parameter or the Marker parameter, but not both.
A tag key or keys for which you want to return all matching resources that are associated with the specified key or keys. For example, suppose that you have resources tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with all resources that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching resources that are associated with the specified value or values. For example, suppose that you have resources tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with all resources that have either or both of these tag values associated with them.
dict
Response Syntax
{
'Marker': 'string',
'SnapshotCopyGrants': [
{
'SnapshotCopyGrantName': 'string',
'KmsKeyId': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
]
}
Response Structure
(dict) --
Marker (string) --
An optional parameter that specifies the starting point to return a set of response records. When the results of a DescribeSnapshotCopyGrant request exceed the value specified in MaxRecords , AWS returns a value in the Marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the Marker parameter and retrying the request.
Constraints: You can specify either the SnapshotCopyGrantName parameter or the Marker parameter, but not both.
SnapshotCopyGrants (list) --
The list of SnapshotCopyGrant objects.
(dict) --
The snapshot copy grant that grants Amazon Redshift permission to encrypt copied snapshots with the specified customer master key (CMK) from AWS KMS in the destination region.
For more information about managing snapshot copy grants, go to Amazon Redshift Database Encryption in the Amazon Redshift Cluster Management Guide .
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
KmsKeyId (string) --
The unique identifier of the customer master key (CMK) in AWS KMS to which Amazon Redshift is granted permission.
Tags (list) --
A list of tag instances.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Returns a list of snapshot schedules.
See also: AWS API Documentation
Request Syntax
response = client.describe_snapshot_schedules(
ClusterIdentifier='string',
ScheduleIdentifier='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
Marker='string',
MaxRecords=123
)
The key value for a snapshot schedule tag.
The value corresponding to the key of the snapshot schedule tag.
dict
Response Syntax
{
'SnapshotSchedules': [
{
'ScheduleDefinitions': [
'string',
],
'ScheduleIdentifier': 'string',
'ScheduleDescription': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'NextInvocations': [
datetime(2015, 1, 1),
],
'AssociatedClusterCount': 123,
'AssociatedClusters': [
{
'ClusterIdentifier': 'string',
'ScheduleAssociationState': 'MODIFYING'|'ACTIVE'|'FAILED'
},
]
},
],
'Marker': 'string'
}
Response Structure
(dict) --
SnapshotSchedules (list) --
A list of SnapshotSchedules.
(dict) --
Describes a snapshot schedule. You can set a regular interval for creating snapshots of a cluster. You can also schedule snapshots for specific dates.
ScheduleDefinitions (list) --
A list of ScheduleDefinitions.
ScheduleIdentifier (string) --
A unique identifier for the schedule.
ScheduleDescription (string) --
The description of the schedule.
Tags (list) --
An optional set of tags describing the schedule.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
NextInvocations (list) --
AssociatedClusterCount (integer) --
The number of clusters associated with the schedule.
AssociatedClusters (list) --
A list of clusters associated with the schedule. A maximum of 100 clusters is returned.
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the marker parameter and retrying the command. If the marker field is empty, all response records have been retrieved for the request.
Returns the total amount of snapshot usage and provisioned storage for a user in megabytes.
See also: AWS API Documentation
Request Syntax
response = client.describe_storage()
{
'TotalBackupSizeInMegaBytes': 123.0,
'TotalProvisionedStorageInMegaBytes': 123.0
}
Response Structure
The total amount of storage currently used for snapshots.
The total amount of storage currently provisioned.
Lists the status of one or more table restore requests made using the RestoreTableFromClusterSnapshot API action. If you don't specify a value for the TableRestoreRequestId parameter, then DescribeTableRestoreStatus returns the status of all table restore requests ordered by the date and time of the request in ascending order. Otherwise DescribeTableRestoreStatus returns the status of the table specified by TableRestoreRequestId .
See also: AWS API Documentation
Request Syntax
response = client.describe_table_restore_status(
ClusterIdentifier='string',
TableRestoreRequestId='string',
MaxRecords=123,
Marker='string'
)
dict
Response Syntax
{
'TableRestoreStatusDetails': [
{
'TableRestoreRequestId': 'string',
'Status': 'PENDING'|'IN_PROGRESS'|'SUCCEEDED'|'FAILED'|'CANCELED',
'Message': 'string',
'RequestTime': datetime(2015, 1, 1),
'ProgressInMegaBytes': 123,
'TotalDataInMegaBytes': 123,
'ClusterIdentifier': 'string',
'SnapshotIdentifier': 'string',
'SourceDatabaseName': 'string',
'SourceSchemaName': 'string',
'SourceTableName': 'string',
'TargetDatabaseName': 'string',
'TargetSchemaName': 'string',
'NewTableName': 'string'
},
],
'Marker': 'string'
}
Response Structure
(dict) --
TableRestoreStatusDetails (list) --
A list of status details for one or more table restore requests.
(dict) --
Describes the status of a RestoreTableFromClusterSnapshot operation.
TableRestoreRequestId (string) --
The unique identifier for the table restore request.
Status (string) --
A value that describes the current state of the table restore request.
Valid Values: SUCCEEDED , FAILED , CANCELED , PENDING , IN_PROGRESS
Message (string) --
A description of the status of the table restore request. Status values include SUCCEEDED , FAILED , CANCELED , PENDING , IN_PROGRESS .
RequestTime (datetime) --
The time that the table restore request was made, in Universal Coordinated Time (UTC).
ProgressInMegaBytes (integer) --
The amount of data restored to the new table so far, in megabytes (MB).
TotalDataInMegaBytes (integer) --
The total amount of data to restore to the new table, in megabytes (MB).
ClusterIdentifier (string) --
The identifier of the Amazon Redshift cluster that the table is being restored to.
SnapshotIdentifier (string) --
The identifier of the snapshot that the table is being restored from.
SourceDatabaseName (string) --
The name of the source database that contains the table being restored.
SourceSchemaName (string) --
The name of the source schema that contains the table being restored.
SourceTableName (string) --
The name of the source table being restored.
TargetDatabaseName (string) --
The name of the database to restore the table to.
TargetSchemaName (string) --
The name of the schema to restore the table to.
NewTableName (string) --
The name of the table to create as a result of the table restore request.
Marker (string) --
A pagination token that can be used in a subsequent DescribeTableRestoreStatus request.
Returns a list of tags. You can return tags from a specific resource by specifying an ARN, or you can return all tags for a given type of resource, such as clusters, snapshots, and so on.
The following are limitations for DescribeTags :
If you specify both tag keys and tag values in the same request, Amazon Redshift returns all resources that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all resources that have any combination of those values are returned.
If both tag keys and values are omitted from the request, resources are returned regardless of whether they have tag keys or values associated with them.
See also: AWS API Documentation
Request Syntax
response = client.describe_tags(
ResourceName='string',
ResourceType='string',
MaxRecords=123,
Marker='string',
TagKeys=[
'string',
],
TagValues=[
'string',
]
)
The type of resource with which you want to view tags. Valid resource types are:
For more information about Amazon Redshift resource types and constructing ARNs, go to Specifying Policy Elements: Actions, Effects, Resources, and Principals in the Amazon Redshift Cluster Management Guide.
A tag key or keys for which you want to return all matching resources that are associated with the specified key or keys. For example, suppose that you have resources tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with all resources that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching resources that are associated with the specified value or values. For example, suppose that you have resources tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with all resources that have either or both of these tag values associated with them.
dict
Response Syntax
{
'TaggedResources': [
{
'Tag': {
'Key': 'string',
'Value': 'string'
},
'ResourceName': 'string',
'ResourceType': 'string'
},
],
'Marker': 'string'
}
Response Structure
(dict) --
TaggedResources (list) --
A list of tags with their associated resources.
(dict) --
A tag and its associated resource.
Tag (dict) --
The tag for the resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
ResourceName (string) --
The Amazon Resource Name (ARN) with which the tag is associated, for example: arn:aws:redshift:us-east-1:123456789:cluster:t1 .
ResourceType (string) --
The type of resource with which the tag is associated. Valid resource types are:
For more information about Amazon Redshift resource types and constructing ARNs, go to Constructing an Amazon Redshift Amazon Resource Name (ARN) in the Amazon Redshift Cluster Management Guide.
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
Stops logging information, such as queries and connection attempts, for the specified Amazon Redshift cluster.
See also: AWS API Documentation
Request Syntax
response = client.disable_logging(
ClusterIdentifier='string'
)
[REQUIRED]
The identifier of the cluster on which logging is to be stopped.
Example: examplecluster
{
'LoggingEnabled': True|False,
'BucketName': 'string',
'S3KeyPrefix': 'string',
'LastSuccessfulDeliveryTime': datetime(2015, 1, 1),
'LastFailureTime': datetime(2015, 1, 1),
'LastFailureMessage': 'string'
}
Response Structure
Describes the status of logging for a cluster.
true if logging is on, false if logging is off.
The name of the S3 bucket where the log files are stored.
The prefix applied to the log file names.
The last time that logs were delivered.
The last time when logs failed to be delivered.
The message indicating that logs failed to be delivered.
Disables the automatic copying of snapshots from one region to another region for a specified cluster.
If your cluster and its snapshots are encrypted using a customer master key (CMK) from AWS KMS, use DeleteSnapshotCopyGrant to delete the grant that grants Amazon Redshift permission to the CMK in the destination region.
See also: AWS API Documentation
Request Syntax
response = client.disable_snapshot_copy(
ClusterIdentifier='string'
)
[REQUIRED]
The unique identifier of the source cluster that you want to disable copying of snapshots to a destination region.
Constraints: Must be the valid name of an existing cluster that has cross-region snapshot copy enabled.
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
Describes a cluster.
The unique identifier of the cluster.
The node type for the nodes in the cluster.
The current state of the cluster. Possible values are the following:
The status of a modify operation, if any, initiated for the cluster.
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
The connection endpoint.
The DNS address of the Cluster.
The port that the database engine is listening on.
The date and time that the cluster was created.
The number of days that automatic cluster snapshots are retained.
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
Describes a cluster security group.
The name of the cluster security group.
The status of the cluster security group.
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
Describes the members of a VPC security group.
The identifier of the VPC security group.
The status of the VPC security group.
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
Describes the status of a parameter group.
The name of the cluster parameter group.
The status of parameter updates.
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
Describes the status of a parameter group.
The name of the parameter.
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
The error that prevented the parameter from being applied to the database.
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
The name of the Availability Zone in which the cluster is located.
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
The pending or in-progress change of the master user password for the cluster.
The pending or in-progress change of the cluster's node type.
The pending or in-progress change of the number of nodes in the cluster.
The pending or in-progress change of the cluster type.
The pending or in-progress change of the service version.
The pending or in-progress change of the automated snapshot retention period.
The pending or in-progress change of the new identifier for the cluster.
The pending or in-progress change of the ability to connect to the cluster from the public network.
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
The name of the maintenance track that the cluster will change to during the next maintenance window.
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
The version ID of the Amazon Redshift engine that is running on the cluster.
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
The number of compute nodes in the cluster.
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
The status of the restore action. Returns starting, restoring, completed, or failed.
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
The size of the set of snapshot data used to restore the cluster.
The number of megabytes that have been transferred from snapshot storage.
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
Describes the data transfer rate in MB's per second.
Describes the total amount of data to be transfered in megabytes.
Describes the total amount of data that has been transfered in MB's.
Describes the estimated number of seconds remaining to complete the transfer.
Describes the number of seconds that have elapsed during the data transfer.
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
The name of the snapshot copy grant.
The public key for the cluster.
The nodes in the cluster.
The identifier of a node in a cluster.
Whether the node is a leader node or a compute node.
The private IP address of a node within a cluster.
The public IP address of a node within a cluster.
The status of the elastic IP (EIP) address.
The elastic IP (EIP) address for the cluster.
The status of the elastic IP (EIP) address.
The specific revision number of the database in the cluster.
The list of tags for the cluster.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
Cluster operations that are waiting to be started.
The name of the maintenance track for the cluster.
The number of nodes that you can resize the cluster to with the elastic resize method.
Describes a group of DeferredMaintenanceWindow objects.
Describes a deferred maintenance window
A unique identifier for the maintenance window.
A timestamp for the beginning of the time period when we defer maintenance.
A timestamp for the end of the time period when we defer maintenance.
A unique identifier for the cluster snapshot schedule.
The current state of the cluster snapshot schedule.
Returns the following:
Returns the value ClassicResize .
A boolean value indicating if the resize operation can be cancelled.
Starts logging information, such as queries and connection attempts, for the specified Amazon Redshift cluster.
See also: AWS API Documentation
Request Syntax
response = client.enable_logging(
ClusterIdentifier='string',
BucketName='string',
S3KeyPrefix='string'
)
[REQUIRED]
The identifier of the cluster on which logging is to be started.
Example: examplecluster
[REQUIRED]
The name of an existing S3 bucket where the log files are to be stored.
Constraints:
The prefix applied to the log file names.
Constraints:
dict
Response Syntax
{
'LoggingEnabled': True|False,
'BucketName': 'string',
'S3KeyPrefix': 'string',
'LastSuccessfulDeliveryTime': datetime(2015, 1, 1),
'LastFailureTime': datetime(2015, 1, 1),
'LastFailureMessage': 'string'
}
Response Structure
(dict) --
Describes the status of logging for a cluster.
LoggingEnabled (boolean) --
true if logging is on, false if logging is off.
BucketName (string) --
The name of the S3 bucket where the log files are stored.
S3KeyPrefix (string) --
The prefix applied to the log file names.
LastSuccessfulDeliveryTime (datetime) --
The last time that logs were delivered.
LastFailureTime (datetime) --
The last time when logs failed to be delivered.
LastFailureMessage (string) --
The message indicating that logs failed to be delivered.
Enables the automatic copy of snapshots from one region to another region for a specified cluster.
See also: AWS API Documentation
Request Syntax
response = client.enable_snapshot_copy(
ClusterIdentifier='string',
DestinationRegion='string',
RetentionPeriod=123,
SnapshotCopyGrantName='string',
ManualSnapshotRetentionPeriod=123
)
[REQUIRED]
The unique identifier of the source cluster to copy snapshots from.
Constraints: Must be the valid name of an existing cluster that does not already have cross-region snapshot copy enabled.
[REQUIRED]
The destination AWS Region that you want to copy snapshots to.
Constraints: Must be the name of a valid AWS Region. For more information, see Regions and Endpoints in the Amazon Web Services General Reference.
The number of days to retain automated snapshots in the destination region after they are copied from the source region.
Default: 7.
Constraints: Must be at least 1 and no more than 35.
The number of days to retain newly copied snapshots in the destination AWS Region after they are copied from the source AWS Region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
dict
Response Syntax
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
(dict) --
Cluster (dict) --
Describes a cluster.
ClusterIdentifier (string) --
The unique identifier of the cluster.
NodeType (string) --
The node type for the nodes in the cluster.
ClusterStatus (string) --
The current state of the cluster. Possible values are the following:
ModifyStatus (string) --
The status of a modify operation, if any, initiated for the cluster.
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
DBName (string) --
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the Cluster.
Port (integer) --
The port that the database engine is listening on.
ClusterCreateTime (datetime) --
The date and time that the cluster was created.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
ClusterSecurityGroups (list) --
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
(dict) --
Describes a cluster security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
VpcSecurityGroups (list) --
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
(dict) --
Describes the members of a VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
Status (string) --
The status of the VPC security group.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
(dict) --
Describes the status of a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
ClusterParameterStatusList (list) --
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
(dict) --
Describes the status of a parameter group.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
VpcId (string) --
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
PendingModifiedValues (dict) --
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
MasterUserPassword (string) --
The pending or in-progress change of the master user password for the cluster.
NodeType (string) --
The pending or in-progress change of the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change of the number of nodes in the cluster.
ClusterType (string) --
The pending or in-progress change of the cluster type.
ClusterVersion (string) --
The pending or in-progress change of the service version.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change of the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change of the new identifier for the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change of the ability to connect to the cluster from the public network.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster will change to during the next maintenance window.
EncryptionType (string) --
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
AllowVersionUpgrade (boolean) --
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PubliclyAccessible (boolean) --
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
Encrypted (boolean) --
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
RestoreStatus (dict) --
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
Status (string) --
The status of the restore action. Returns starting, restoring, completed, or failed.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data used to restore the cluster.
ProgressInMegaBytes (integer) --
The number of megabytes that have been transferred from snapshot storage.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
DataTransferProgress (dict) --
Status (string) --
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
CurrentRateInMegaBytesPerSecond (float) --
Describes the data transfer rate in MB's per second.
TotalDataInMegaBytes (integer) --
Describes the total amount of data to be transfered in megabytes.
DataTransferredInMegaBytes (integer) --
Describes the total amount of data that has been transfered in MB's.
EstimatedTimeToCompletionInSeconds (integer) --
Describes the estimated number of seconds remaining to complete the transfer.
ElapsedTimeInSeconds (integer) --
Describes the number of seconds that have elapsed during the data transfer.
HsmStatus (dict) --
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
HsmClientCertificateIdentifier (string) --
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
HsmConfigurationIdentifier (string) --
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
ClusterSnapshotCopyStatus (dict) --
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
DestinationRegion (string) --
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
RetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
ManualSnapshotRetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
The identifier of a node in a cluster.
NodeRole (string) --
Whether the node is a leader node or a compute node.
PrivateIPAddress (string) --
The private IP address of a node within a cluster.
PublicIPAddress (string) --
The public IP address of a node within a cluster.
ElasticIpStatus (dict) --
The status of the elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP (EIP) address for the cluster.
Status (string) --
The status of the elastic IP (EIP) address.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
Tags (list) --
The list of tags for the cluster.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
KmsKeyId (string) --
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
IamRoles (list) --
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
(dict) --
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
IamRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
ApplyStatus (string) --
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
PendingActions (list) --
Cluster operations that are waiting to be started.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can resize the cluster to with the elastic resize method.
DeferredMaintenanceWindows (list) --
Describes a group of DeferredMaintenanceWindow objects.
(dict) --
Describes a deferred maintenance window
DeferMaintenanceIdentifier (string) --
A unique identifier for the maintenance window.
DeferMaintenanceStartTime (datetime) --
A timestamp for the beginning of the time period when we defer maintenance.
DeferMaintenanceEndTime (datetime) --
A timestamp for the end of the time period when we defer maintenance.
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
ResizeInfo (dict) --
Returns the following:
ResizeType (string) --
Returns the value ClassicResize .
AllowCancelResize (boolean) --
A boolean value indicating if the resize operation can be cancelled.
Generate a presigned url given a client, its method, and arguments
The presigned url
Returns a database user name and temporary password with temporary authorization to log on to an Amazon Redshift database. The action returns the database user name prefixed with IAM: if AutoCreate is False or IAMA: if AutoCreate is True . You can optionally specify one or more database user groups that the user will join at log on. By default, the temporary credentials expire in 900 seconds. You can optionally specify a duration between 900 seconds (15 minutes) and 3600 seconds (60 minutes). For more information, see Using IAM Authentication to Generate Database User Credentials in the Amazon Redshift Cluster Management Guide.
The AWS Identity and Access Management (IAM)user or role that executes GetClusterCredentials must have an IAM policy attached that allows access to all necessary actions and resources. For more information about permissions, see Resource Policies for GetClusterCredentials in the Amazon Redshift Cluster Management Guide.
If the DbGroups parameter is specified, the IAM policy must allow the redshift:JoinGroup action with access to the listed dbgroups .
In addition, if the AutoCreate parameter is set to True , then the policy must include the redshift:CreateClusterUser privilege.
If the DbName parameter is specified, the IAM policy must allow access to the resource dbname for the specified database name.
See also: AWS API Documentation
Request Syntax
response = client.get_cluster_credentials(
DbUser='string',
DbName='string',
ClusterIdentifier='string',
DurationSeconds=123,
AutoCreate=True|False,
DbGroups=[
'string',
]
)
[REQUIRED]
The name of a database user. If a user name matching DbUser exists in the database, the temporary user credentials have the same permissions as the existing user. If DbUser doesn't exist in the database and Autocreate is True , a new user is created using the value for DbUser with PUBLIC permissions. If a database user matching the value for DbUser doesn't exist and Autocreate is False , then the command succeeds but the connection attempt will fail because the user doesn't exist in the database.
For more information, see CREATE USER in the Amazon Redshift Database Developer Guide.
Constraints:
The name of a database that DbUser is authorized to log on to. If DbName is not specified, DbUser can log on to any existing database.
Constraints:
[REQUIRED]
The unique identifier of the cluster that contains the database for which your are requesting credentials. This parameter is case sensitive.
The number of seconds until the returned temporary password expires.
Constraint: minimum 900, maximum 3600.
Default: 900
A list of the names of existing database groups that the user named in DbUser will join for the current session, in addition to any group memberships for an existing user. If not specified, a new user is added only to PUBLIC.
Database group name constraints
dict
Response Syntax
{
'DbUser': 'string',
'DbPassword': 'string',
'Expiration': datetime(2015, 1, 1)
}
Response Structure
(dict) --
Temporary credentials with authorization to log on to an Amazon Redshift database.
DbUser (string) --
A database user name that is authorized to log on to the database DbName using the password DbPassword . If the specified DbUser exists in the database, the new user name has the same database privileges as the the user named in DbUser. By default, the user is added to PUBLIC. If the DbGroups parameter is specifed, DbUser is added to the listed groups for any sessions created using these credentials.
DbPassword (string) --
A temporary password that authorizes the user name returned by DbUser to log on to the database DbName .
Expiration (datetime) --
The date and time the password in DbPassword expires.
Create a paginator for an operation.
Returns an array of DC2 ReservedNodeOfferings that matches the payment type, term, and usage price of the given DC1 reserved node.
See also: AWS API Documentation
Request Syntax
response = client.get_reserved_node_exchange_offerings(
ReservedNodeId='string',
MaxRecords=123,
Marker='string'
)
[REQUIRED]
A string representing the node identifier for the DC1 Reserved Node to be exchanged.
dict
Response Syntax
{
'Marker': 'string',
'ReservedNodeOfferings': [
{
'ReservedNodeOfferingId': 'string',
'NodeType': 'string',
'Duration': 123,
'FixedPrice': 123.0,
'UsagePrice': 123.0,
'CurrencyCode': 'string',
'OfferingType': 'string',
'RecurringCharges': [
{
'RecurringChargeAmount': 123.0,
'RecurringChargeFrequency': 'string'
},
],
'ReservedNodeOfferingType': 'Regular'|'Upgradable'
},
]
}
Response Structure
(dict) --
Marker (string) --
An optional parameter that specifies the starting point for returning a set of response records. When the results of a GetReservedNodeExchangeOfferings request exceed the value specified in MaxRecords, Amazon Redshift returns a value in the marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the marker parameter and retrying the request.
ReservedNodeOfferings (list) --
Returns an array of ReservedNodeOffering objects.
(dict) --
Describes a reserved node offering.
ReservedNodeOfferingId (string) --
The offering identifier.
NodeType (string) --
The node type offered by the reserved node offering.
Duration (integer) --
The duration, in seconds, for which the offering will reserve the node.
FixedPrice (float) --
The upfront fixed charge you will pay to purchase the specific reserved node offering.
UsagePrice (float) --
The rate you are charged for each hour the cluster that is using the offering is running.
CurrencyCode (string) --
The currency code for the compute nodes offering.
OfferingType (string) --
The anticipated utilization of the reserved node, as defined in the reserved node offering.
RecurringCharges (list) --
The charge to your account regardless of whether you are creating any clusters using the node offering. Recurring charges are only in effect for heavy-utilization reserved nodes.
(dict) --
Describes a recurring charge.
RecurringChargeAmount (float) --
The amount charged per the period of time specified by the recurring charge frequency.
RecurringChargeFrequency (string) --
The frequency at which the recurring charge amount is applied.
ReservedNodeOfferingType (string) --
Returns an object that can wait for some condition.
Modifies the settings for a cluster. For example, you can add another security or parameter group, update the preferred maintenance window, or change the master user password. Resetting a cluster password or modifying the security groups associated with a cluster do not need a reboot. However, modifying a parameter group requires a reboot for parameters to take effect. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide .
You can also change node type and the number of nodes to scale up or down the cluster. When resizing a cluster, you must specify both the number of nodes and the node type even if one of the parameters does not change.
See also: AWS API Documentation
Request Syntax
response = client.modify_cluster(
ClusterIdentifier='string',
ClusterType='string',
NodeType='string',
NumberOfNodes=123,
ClusterSecurityGroups=[
'string',
],
VpcSecurityGroupIds=[
'string',
],
MasterUserPassword='string',
ClusterParameterGroupName='string',
AutomatedSnapshotRetentionPeriod=123,
ManualSnapshotRetentionPeriod=123,
PreferredMaintenanceWindow='string',
ClusterVersion='string',
AllowVersionUpgrade=True|False,
HsmClientCertificateIdentifier='string',
HsmConfigurationIdentifier='string',
NewClusterIdentifier='string',
PubliclyAccessible=True|False,
ElasticIp='string',
EnhancedVpcRouting=True|False,
MaintenanceTrackName='string',
Encrypted=True|False,
KmsKeyId='string'
)
[REQUIRED]
The unique identifier of the cluster to be modified.
Example: examplecluster
The new cluster type.
When you submit your cluster resize request, your existing cluster goes into a read-only mode. After Amazon Redshift provisions a new cluster based on your resize requirements, there will be outage for a period while the old cluster is deleted and your connection is switched to the new cluster. You can use DescribeResize to track the progress of the resize request.
Valid Values: multi-node | single-node
The new node type of the cluster. If you specify a new node type, you must also specify the number of nodes parameter.
When you submit your request to resize a cluster, Amazon Redshift sets access permissions for the cluster to read-only. After Amazon Redshift provisions a new cluster according to your resize requirements, there will be a temporary outage while the old cluster is deleted and your connection is switched to the new cluster. When the new connection is complete, the original access permissions for the cluster are restored. You can use DescribeResize to track the progress of the resize request.
Valid Values: ds2.xlarge | ds2.8xlarge | dc1.large | dc1.8xlarge | dc2.large | dc2.8xlarge
The new number of nodes of the cluster. If you specify a new number of nodes, you must also specify the node type parameter.
When you submit your request to resize a cluster, Amazon Redshift sets access permissions for the cluster to read-only. After Amazon Redshift provisions a new cluster according to your resize requirements, there will be a temporary outage while the old cluster is deleted and your connection is switched to the new cluster. When the new connection is complete, the original access permissions for the cluster are restored. You can use DescribeResize to track the progress of the resize request.
Valid Values: Integer greater than 0 .
A list of cluster security groups to be authorized on this cluster. This change is asynchronously applied as soon as possible.
Security groups currently associated with the cluster, and not in the list of groups to apply, will be revoked from the cluster.
Constraints:
A list of virtual private cloud (VPC) security groups to be associated with the cluster. This change is asynchronously applied as soon as possible.
The new password for the cluster master user. This change is asynchronously applied as soon as possible. Between the time of the request and the completion of the request, the MasterUserPassword element exists in the PendingModifiedValues element of the operation response.
Note
Operations never return the password, so this operation provides a way to regain access to the master user account for a cluster if the password is lost.
Default: Uses existing setting.
Constraints:
The name of the cluster parameter group to apply to this cluster. This change is applied only after the cluster is rebooted. To reboot a cluster use RebootCluster .
Default: Uses existing setting.
Constraints: The cluster parameter group must be in the same parameter group family that matches the cluster version.
The number of days that automated snapshots are retained. If the value is 0, automated snapshots are disabled. Even if automated snapshots are disabled, you can still create manual snapshots when you want with CreateClusterSnapshot .
If you decrease the automated snapshot retention period from its current value, existing automated snapshots that fall outside of the new retention period will be immediately deleted.
Default: Uses existing setting.
Constraints: Must be a value from 0 to 35.
The default for number of days that a newly created manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely. This value doesn't retroactively change the retention periods of existing manual snapshots.
The value must be either -1 or an integer between 1 and 3,653.
The default value is -1.
The weekly time range (in UTC) during which system maintenance can occur, if necessary. If system maintenance is necessary during the window, it may result in an outage.
This maintenance window change is made immediately. If the new maintenance window indicates the current time, there must be at least 120 minutes between the current time and end of the window in order to ensure that pending changes are applied.
Default: Uses existing setting.
Format: ddd:hh24:mi-ddd:hh24:mi, for example wed:07:30-wed:08:00 .
Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun
Constraints: Must be at least 30 minutes.
The new version number of the Amazon Redshift engine to upgrade to.
For major version upgrades, if a non-default cluster parameter group is currently in use, a new cluster parameter group in the cluster parameter group family for the new version must be specified. The new cluster parameter group can be the default for that cluster parameter group family. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
Example: 1.0
If true , major version upgrades will be applied automatically to the cluster during the maintenance window.
Default: false
The new identifier for the cluster.
Constraints:
Example: examplecluster
The Elastic IP (EIP) address for the cluster.
Constraints: The cluster must be provisioned in EC2-VPC and publicly-accessible through an Internet gateway. For more information about provisioning clusters in EC2-VPC, go to Supported Platforms to Launch Your Cluster in the Amazon Redshift Cluster Management Guide.
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
dict
Response Syntax
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
(dict) --
Cluster (dict) --
Describes a cluster.
ClusterIdentifier (string) --
The unique identifier of the cluster.
NodeType (string) --
The node type for the nodes in the cluster.
ClusterStatus (string) --
The current state of the cluster. Possible values are the following:
ModifyStatus (string) --
The status of a modify operation, if any, initiated for the cluster.
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
DBName (string) --
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the Cluster.
Port (integer) --
The port that the database engine is listening on.
ClusterCreateTime (datetime) --
The date and time that the cluster was created.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
ClusterSecurityGroups (list) --
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
(dict) --
Describes a cluster security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
VpcSecurityGroups (list) --
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
(dict) --
Describes the members of a VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
Status (string) --
The status of the VPC security group.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
(dict) --
Describes the status of a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
ClusterParameterStatusList (list) --
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
(dict) --
Describes the status of a parameter group.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
VpcId (string) --
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
PendingModifiedValues (dict) --
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
MasterUserPassword (string) --
The pending or in-progress change of the master user password for the cluster.
NodeType (string) --
The pending or in-progress change of the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change of the number of nodes in the cluster.
ClusterType (string) --
The pending or in-progress change of the cluster type.
ClusterVersion (string) --
The pending or in-progress change of the service version.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change of the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change of the new identifier for the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change of the ability to connect to the cluster from the public network.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster will change to during the next maintenance window.
EncryptionType (string) --
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
AllowVersionUpgrade (boolean) --
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PubliclyAccessible (boolean) --
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
Encrypted (boolean) --
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
RestoreStatus (dict) --
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
Status (string) --
The status of the restore action. Returns starting, restoring, completed, or failed.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data used to restore the cluster.
ProgressInMegaBytes (integer) --
The number of megabytes that have been transferred from snapshot storage.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
DataTransferProgress (dict) --
Status (string) --
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
CurrentRateInMegaBytesPerSecond (float) --
Describes the data transfer rate in MB's per second.
TotalDataInMegaBytes (integer) --
Describes the total amount of data to be transfered in megabytes.
DataTransferredInMegaBytes (integer) --
Describes the total amount of data that has been transfered in MB's.
EstimatedTimeToCompletionInSeconds (integer) --
Describes the estimated number of seconds remaining to complete the transfer.
ElapsedTimeInSeconds (integer) --
Describes the number of seconds that have elapsed during the data transfer.
HsmStatus (dict) --
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
HsmClientCertificateIdentifier (string) --
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
HsmConfigurationIdentifier (string) --
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
ClusterSnapshotCopyStatus (dict) --
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
DestinationRegion (string) --
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
RetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
ManualSnapshotRetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
The identifier of a node in a cluster.
NodeRole (string) --
Whether the node is a leader node or a compute node.
PrivateIPAddress (string) --
The private IP address of a node within a cluster.
PublicIPAddress (string) --
The public IP address of a node within a cluster.
ElasticIpStatus (dict) --
The status of the elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP (EIP) address for the cluster.
Status (string) --
The status of the elastic IP (EIP) address.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
Tags (list) --
The list of tags for the cluster.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
KmsKeyId (string) --
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
IamRoles (list) --
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
(dict) --
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
IamRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
ApplyStatus (string) --
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
PendingActions (list) --
Cluster operations that are waiting to be started.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can resize the cluster to with the elastic resize method.
DeferredMaintenanceWindows (list) --
Describes a group of DeferredMaintenanceWindow objects.
(dict) --
Describes a deferred maintenance window
DeferMaintenanceIdentifier (string) --
A unique identifier for the maintenance window.
DeferMaintenanceStartTime (datetime) --
A timestamp for the beginning of the time period when we defer maintenance.
DeferMaintenanceEndTime (datetime) --
A timestamp for the end of the time period when we defer maintenance.
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
ResizeInfo (dict) --
Returns the following:
ResizeType (string) --
Returns the value ClassicResize .
AllowCancelResize (boolean) --
A boolean value indicating if the resize operation can be cancelled.
Modifies the database revision of a cluster. The database revision is a unique revision of the database running in a cluster.
See also: AWS API Documentation
Request Syntax
response = client.modify_cluster_db_revision(
ClusterIdentifier='string',
RevisionTarget='string'
)
[REQUIRED]
The unique identifier of a cluster whose database revision you want to modify.
Example: examplecluster
[REQUIRED]
The identifier of the database revision. You can retrieve this value from the response to the DescribeClusterDbRevisions request.
dict
Response Syntax
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
(dict) --
Cluster (dict) --
Describes a cluster.
ClusterIdentifier (string) --
The unique identifier of the cluster.
NodeType (string) --
The node type for the nodes in the cluster.
ClusterStatus (string) --
The current state of the cluster. Possible values are the following:
ModifyStatus (string) --
The status of a modify operation, if any, initiated for the cluster.
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
DBName (string) --
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the Cluster.
Port (integer) --
The port that the database engine is listening on.
ClusterCreateTime (datetime) --
The date and time that the cluster was created.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
ClusterSecurityGroups (list) --
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
(dict) --
Describes a cluster security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
VpcSecurityGroups (list) --
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
(dict) --
Describes the members of a VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
Status (string) --
The status of the VPC security group.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
(dict) --
Describes the status of a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
ClusterParameterStatusList (list) --
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
(dict) --
Describes the status of a parameter group.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
VpcId (string) --
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
PendingModifiedValues (dict) --
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
MasterUserPassword (string) --
The pending or in-progress change of the master user password for the cluster.
NodeType (string) --
The pending or in-progress change of the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change of the number of nodes in the cluster.
ClusterType (string) --
The pending or in-progress change of the cluster type.
ClusterVersion (string) --
The pending or in-progress change of the service version.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change of the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change of the new identifier for the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change of the ability to connect to the cluster from the public network.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster will change to during the next maintenance window.
EncryptionType (string) --
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
AllowVersionUpgrade (boolean) --
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PubliclyAccessible (boolean) --
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
Encrypted (boolean) --
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
RestoreStatus (dict) --
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
Status (string) --
The status of the restore action. Returns starting, restoring, completed, or failed.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data used to restore the cluster.
ProgressInMegaBytes (integer) --
The number of megabytes that have been transferred from snapshot storage.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
DataTransferProgress (dict) --
Status (string) --
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
CurrentRateInMegaBytesPerSecond (float) --
Describes the data transfer rate in MB's per second.
TotalDataInMegaBytes (integer) --
Describes the total amount of data to be transfered in megabytes.
DataTransferredInMegaBytes (integer) --
Describes the total amount of data that has been transfered in MB's.
EstimatedTimeToCompletionInSeconds (integer) --
Describes the estimated number of seconds remaining to complete the transfer.
ElapsedTimeInSeconds (integer) --
Describes the number of seconds that have elapsed during the data transfer.
HsmStatus (dict) --
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
HsmClientCertificateIdentifier (string) --
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
HsmConfigurationIdentifier (string) --
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
ClusterSnapshotCopyStatus (dict) --
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
DestinationRegion (string) --
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
RetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
ManualSnapshotRetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
The identifier of a node in a cluster.
NodeRole (string) --
Whether the node is a leader node or a compute node.
PrivateIPAddress (string) --
The private IP address of a node within a cluster.
PublicIPAddress (string) --
The public IP address of a node within a cluster.
ElasticIpStatus (dict) --
The status of the elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP (EIP) address for the cluster.
Status (string) --
The status of the elastic IP (EIP) address.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
Tags (list) --
The list of tags for the cluster.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
KmsKeyId (string) --
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
IamRoles (list) --
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
(dict) --
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
IamRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
ApplyStatus (string) --
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
PendingActions (list) --
Cluster operations that are waiting to be started.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can resize the cluster to with the elastic resize method.
DeferredMaintenanceWindows (list) --
Describes a group of DeferredMaintenanceWindow objects.
(dict) --
Describes a deferred maintenance window
DeferMaintenanceIdentifier (string) --
A unique identifier for the maintenance window.
DeferMaintenanceStartTime (datetime) --
A timestamp for the beginning of the time period when we defer maintenance.
DeferMaintenanceEndTime (datetime) --
A timestamp for the end of the time period when we defer maintenance.
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
ResizeInfo (dict) --
Returns the following:
ResizeType (string) --
Returns the value ClassicResize .
AllowCancelResize (boolean) --
A boolean value indicating if the resize operation can be cancelled.
Modifies the list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
A cluster can have up to 10 IAM roles associated at any time.
See also: AWS API Documentation
Request Syntax
response = client.modify_cluster_iam_roles(
ClusterIdentifier='string',
AddIamRoles=[
'string',
],
RemoveIamRoles=[
'string',
]
)
[REQUIRED]
The unique identifier of the cluster for which you want to associate or disassociate IAM roles.
Zero or more IAM roles to associate with the cluster. The roles must be in their Amazon Resource Name (ARN) format. You can associate up to 10 IAM roles with a single cluster in a single request.
Zero or more IAM roles in ARN format to disassociate from the cluster. You can disassociate up to 10 IAM roles from a single cluster in a single request.
dict
Response Syntax
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
(dict) --
Cluster (dict) --
Describes a cluster.
ClusterIdentifier (string) --
The unique identifier of the cluster.
NodeType (string) --
The node type for the nodes in the cluster.
ClusterStatus (string) --
The current state of the cluster. Possible values are the following:
ModifyStatus (string) --
The status of a modify operation, if any, initiated for the cluster.
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
DBName (string) --
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the Cluster.
Port (integer) --
The port that the database engine is listening on.
ClusterCreateTime (datetime) --
The date and time that the cluster was created.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
ClusterSecurityGroups (list) --
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
(dict) --
Describes a cluster security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
VpcSecurityGroups (list) --
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
(dict) --
Describes the members of a VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
Status (string) --
The status of the VPC security group.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
(dict) --
Describes the status of a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
ClusterParameterStatusList (list) --
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
(dict) --
Describes the status of a parameter group.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
VpcId (string) --
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
PendingModifiedValues (dict) --
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
MasterUserPassword (string) --
The pending or in-progress change of the master user password for the cluster.
NodeType (string) --
The pending or in-progress change of the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change of the number of nodes in the cluster.
ClusterType (string) --
The pending or in-progress change of the cluster type.
ClusterVersion (string) --
The pending or in-progress change of the service version.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change of the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change of the new identifier for the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change of the ability to connect to the cluster from the public network.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster will change to during the next maintenance window.
EncryptionType (string) --
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
AllowVersionUpgrade (boolean) --
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PubliclyAccessible (boolean) --
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
Encrypted (boolean) --
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
RestoreStatus (dict) --
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
Status (string) --
The status of the restore action. Returns starting, restoring, completed, or failed.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data used to restore the cluster.
ProgressInMegaBytes (integer) --
The number of megabytes that have been transferred from snapshot storage.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
DataTransferProgress (dict) --
Status (string) --
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
CurrentRateInMegaBytesPerSecond (float) --
Describes the data transfer rate in MB's per second.
TotalDataInMegaBytes (integer) --
Describes the total amount of data to be transfered in megabytes.
DataTransferredInMegaBytes (integer) --
Describes the total amount of data that has been transfered in MB's.
EstimatedTimeToCompletionInSeconds (integer) --
Describes the estimated number of seconds remaining to complete the transfer.
ElapsedTimeInSeconds (integer) --
Describes the number of seconds that have elapsed during the data transfer.
HsmStatus (dict) --
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
HsmClientCertificateIdentifier (string) --
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
HsmConfigurationIdentifier (string) --
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
ClusterSnapshotCopyStatus (dict) --
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
DestinationRegion (string) --
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
RetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
ManualSnapshotRetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
The identifier of a node in a cluster.
NodeRole (string) --
Whether the node is a leader node or a compute node.
PrivateIPAddress (string) --
The private IP address of a node within a cluster.
PublicIPAddress (string) --
The public IP address of a node within a cluster.
ElasticIpStatus (dict) --
The status of the elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP (EIP) address for the cluster.
Status (string) --
The status of the elastic IP (EIP) address.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
Tags (list) --
The list of tags for the cluster.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
KmsKeyId (string) --
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
IamRoles (list) --
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
(dict) --
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
IamRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
ApplyStatus (string) --
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
PendingActions (list) --
Cluster operations that are waiting to be started.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can resize the cluster to with the elastic resize method.
DeferredMaintenanceWindows (list) --
Describes a group of DeferredMaintenanceWindow objects.
(dict) --
Describes a deferred maintenance window
DeferMaintenanceIdentifier (string) --
A unique identifier for the maintenance window.
DeferMaintenanceStartTime (datetime) --
A timestamp for the beginning of the time period when we defer maintenance.
DeferMaintenanceEndTime (datetime) --
A timestamp for the end of the time period when we defer maintenance.
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
ResizeInfo (dict) --
Returns the following:
ResizeType (string) --
Returns the value ClassicResize .
AllowCancelResize (boolean) --
A boolean value indicating if the resize operation can be cancelled.
Modifies the maintenance settings of a cluster. For example, you can defer a maintenance window. You can also update or cancel a deferment.
See also: AWS API Documentation
Request Syntax
response = client.modify_cluster_maintenance(
ClusterIdentifier='string',
DeferMaintenance=True|False,
DeferMaintenanceIdentifier='string',
DeferMaintenanceStartTime=datetime(2015, 1, 1),
DeferMaintenanceEndTime=datetime(2015, 1, 1),
DeferMaintenanceDuration=123
)
[REQUIRED]
A unique identifier for the cluster.
dict
Response Syntax
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
(dict) --
Cluster (dict) --
Describes a cluster.
ClusterIdentifier (string) --
The unique identifier of the cluster.
NodeType (string) --
The node type for the nodes in the cluster.
ClusterStatus (string) --
The current state of the cluster. Possible values are the following:
ModifyStatus (string) --
The status of a modify operation, if any, initiated for the cluster.
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
DBName (string) --
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the Cluster.
Port (integer) --
The port that the database engine is listening on.
ClusterCreateTime (datetime) --
The date and time that the cluster was created.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
ClusterSecurityGroups (list) --
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
(dict) --
Describes a cluster security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
VpcSecurityGroups (list) --
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
(dict) --
Describes the members of a VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
Status (string) --
The status of the VPC security group.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
(dict) --
Describes the status of a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
ClusterParameterStatusList (list) --
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
(dict) --
Describes the status of a parameter group.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
VpcId (string) --
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
PendingModifiedValues (dict) --
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
MasterUserPassword (string) --
The pending or in-progress change of the master user password for the cluster.
NodeType (string) --
The pending or in-progress change of the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change of the number of nodes in the cluster.
ClusterType (string) --
The pending or in-progress change of the cluster type.
ClusterVersion (string) --
The pending or in-progress change of the service version.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change of the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change of the new identifier for the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change of the ability to connect to the cluster from the public network.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster will change to during the next maintenance window.
EncryptionType (string) --
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
AllowVersionUpgrade (boolean) --
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PubliclyAccessible (boolean) --
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
Encrypted (boolean) --
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
RestoreStatus (dict) --
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
Status (string) --
The status of the restore action. Returns starting, restoring, completed, or failed.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data used to restore the cluster.
ProgressInMegaBytes (integer) --
The number of megabytes that have been transferred from snapshot storage.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
DataTransferProgress (dict) --
Status (string) --
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
CurrentRateInMegaBytesPerSecond (float) --
Describes the data transfer rate in MB's per second.
TotalDataInMegaBytes (integer) --
Describes the total amount of data to be transfered in megabytes.
DataTransferredInMegaBytes (integer) --
Describes the total amount of data that has been transfered in MB's.
EstimatedTimeToCompletionInSeconds (integer) --
Describes the estimated number of seconds remaining to complete the transfer.
ElapsedTimeInSeconds (integer) --
Describes the number of seconds that have elapsed during the data transfer.
HsmStatus (dict) --
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
HsmClientCertificateIdentifier (string) --
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
HsmConfigurationIdentifier (string) --
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
ClusterSnapshotCopyStatus (dict) --
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
DestinationRegion (string) --
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
RetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
ManualSnapshotRetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
The identifier of a node in a cluster.
NodeRole (string) --
Whether the node is a leader node or a compute node.
PrivateIPAddress (string) --
The private IP address of a node within a cluster.
PublicIPAddress (string) --
The public IP address of a node within a cluster.
ElasticIpStatus (dict) --
The status of the elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP (EIP) address for the cluster.
Status (string) --
The status of the elastic IP (EIP) address.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
Tags (list) --
The list of tags for the cluster.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
KmsKeyId (string) --
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
IamRoles (list) --
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
(dict) --
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
IamRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
ApplyStatus (string) --
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
PendingActions (list) --
Cluster operations that are waiting to be started.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can resize the cluster to with the elastic resize method.
DeferredMaintenanceWindows (list) --
Describes a group of DeferredMaintenanceWindow objects.
(dict) --
Describes a deferred maintenance window
DeferMaintenanceIdentifier (string) --
A unique identifier for the maintenance window.
DeferMaintenanceStartTime (datetime) --
A timestamp for the beginning of the time period when we defer maintenance.
DeferMaintenanceEndTime (datetime) --
A timestamp for the end of the time period when we defer maintenance.
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
ResizeInfo (dict) --
Returns the following:
ResizeType (string) --
Returns the value ClassicResize .
AllowCancelResize (boolean) --
A boolean value indicating if the resize operation can be cancelled.
Modifies the parameters of a parameter group.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.modify_cluster_parameter_group(
ParameterGroupName='string',
Parameters=[
{
'ParameterName': 'string',
'ParameterValue': 'string',
'Description': 'string',
'Source': 'string',
'DataType': 'string',
'AllowedValues': 'string',
'ApplyType': 'static'|'dynamic',
'IsModifiable': True|False,
'MinimumEngineVersion': 'string'
},
]
)
[REQUIRED]
The name of the parameter group to be modified.
[REQUIRED]
An array of parameters to be modified. A maximum of 20 parameters can be modified in a single request.
For each parameter to be modified, you must supply at least the parameter name and parameter value; other name-value pairs of the parameter are optional.
For the workload management (WLM) configuration, you must supply all the name-value pairs in the wlm_json_configuration parameter.
Describes a parameter in a cluster parameter group.
The name of the parameter.
The value of the parameter.
A description of the parameter.
The source of the parameter value, such as "engine-default" or "user".
The data type of the parameter.
The valid range of values for the parameter.
Specifies how to apply the WLM configuration parameter. Some properties can be applied dynamically, while other properties require that any associated clusters be rebooted for the configuration changes to be applied. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
If true , the parameter can be modified. Some parameters have security or operational implications that prevent them from being changed.
The earliest engine version to which the parameter can apply.
dict
Response Syntax
{
'ParameterGroupName': 'string',
'ParameterGroupStatus': 'string'
}
Response Structure
(dict) --
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterGroupStatus (string) --
The status of the parameter group. For example, if you made a change to a parameter group name-value pair, then the change could be pending a reboot of an associated cluster.
Modifies the settings for a snapshot.
See also: AWS API Documentation
Request Syntax
response = client.modify_cluster_snapshot(
SnapshotIdentifier='string',
ManualSnapshotRetentionPeriod=123,
Force=True|False
)
[REQUIRED]
The identifier of the snapshot whose setting you want to modify.
The number of days that a manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely.
If the manual snapshot falls outside of the new retention period, you can specify the force option to immediately delete the snapshot.
The value must be either -1 or an integer between 1 and 3,653.
dict
Response Syntax
{
'Snapshot': {
'SnapshotIdentifier': 'string',
'ClusterIdentifier': 'string',
'SnapshotCreateTime': datetime(2015, 1, 1),
'Status': 'string',
'Port': 123,
'AvailabilityZone': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'MasterUsername': 'string',
'ClusterVersion': 'string',
'SnapshotType': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'DBName': 'string',
'VpcId': 'string',
'Encrypted': True|False,
'KmsKeyId': 'string',
'EncryptedWithHSM': True|False,
'AccountsWithRestoreAccess': [
{
'AccountId': 'string',
'AccountAlias': 'string'
},
],
'OwnerAccount': 'string',
'TotalBackupSizeInMegaBytes': 123.0,
'ActualIncrementalBackupSizeInMegaBytes': 123.0,
'BackupProgressInMegaBytes': 123.0,
'CurrentBackupRateInMegaBytesPerSecond': 123.0,
'EstimatedSecondsToCompletion': 123,
'ElapsedTimeInSeconds': 123,
'SourceRegion': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'RestorableNodeTypes': [
'string',
],
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'ManualSnapshotRetentionPeriod': 123,
'ManualSnapshotRemainingDays': 123,
'SnapshotRetentionStartTime': datetime(2015, 1, 1)
}
}
Response Structure
(dict) --
Snapshot (dict) --
Describes a snapshot.
SnapshotIdentifier (string) --
The snapshot identifier that is provided in the request.
ClusterIdentifier (string) --
The identifier of the cluster for which the snapshot was taken.
SnapshotCreateTime (datetime) --
The time (in UTC format) when Amazon Redshift began the snapshot. A snapshot contains a copy of the cluster data as of this exact time.
Status (string) --
The snapshot status. The value of the status depends on the API operation used:
Port (integer) --
The port that the cluster is listening on.
AvailabilityZone (string) --
The Availability Zone in which the cluster was created.
ClusterCreateTime (datetime) --
The time (UTC) when the cluster was originally created.
MasterUsername (string) --
The master user name for the cluster.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
SnapshotType (string) --
The snapshot type. Snapshots created using CreateClusterSnapshot and CopyClusterSnapshot are of type "manual".
NodeType (string) --
The node type of the nodes in the cluster.
NumberOfNodes (integer) --
The number of nodes in the cluster.
DBName (string) --
The name of the database that was created when the cluster was created.
VpcId (string) --
The VPC identifier of the cluster if the snapshot is from a cluster in a VPC. Otherwise, this field is not in the output.
Encrypted (boolean) --
If true , the data in the snapshot is encrypted at rest.
KmsKeyId (string) --
The AWS Key Management Service (KMS) key ID of the encryption key that was used to encrypt data in the cluster from which the snapshot was taken.
EncryptedWithHSM (boolean) --
A boolean that indicates whether the snapshot data is encrypted using the HSM keys of the source cluster. true indicates that the data is encrypted using HSM keys.
AccountsWithRestoreAccess (list) --
A list of the AWS customer accounts authorized to restore the snapshot. Returns null if no accounts are authorized. Visible only to the snapshot owner.
(dict) --
Describes an AWS customer account authorized to restore a snapshot.
AccountId (string) --
The identifier of an AWS customer account authorized to restore a snapshot.
AccountAlias (string) --
The identifier of an AWS support account authorized to restore a snapshot. For AWS support, the identifier is amazon-redshift-support .
OwnerAccount (string) --
For manual snapshots, the AWS customer account used to create or copy the snapshot. For automatic snapshots, the owner of the cluster. The owner can perform all snapshot actions, such as sharing a manual snapshot.
TotalBackupSizeInMegaBytes (float) --
The size of the complete set of backup data that would be used to restore the cluster.
ActualIncrementalBackupSizeInMegaBytes (float) --
The size of the incremental backup.
BackupProgressInMegaBytes (float) --
The number of megabytes that have been transferred to the snapshot backup.
CurrentBackupRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred to the snapshot backup. Returns 0 for a completed backup.
EstimatedSecondsToCompletion (integer) --
The estimate of the time remaining before the snapshot backup will complete. Returns 0 for a completed backup.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress snapshot backup has been running, or the amount of time it took a completed backup to finish.
SourceRegion (string) --
The source region from which the snapshot was copied.
Tags (list) --
The list of tags for the cluster snapshot.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
RestorableNodeTypes (list) --
The list of node types that this cluster snapshot is able to restore into.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track for the snapshot.
ManualSnapshotRetentionPeriod (integer) --
The number of days that a manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
ManualSnapshotRemainingDays (integer) --
The number of days until a manual snapshot will pass its retention period.
SnapshotRetentionStartTime (datetime) --
A timestamp representing the start of the retention period for the snapshot.
Modifies a snapshot schedule for a cluster.
See also: AWS API Documentation
Request Syntax
response = client.modify_cluster_snapshot_schedule(
ClusterIdentifier='string',
ScheduleIdentifier='string',
DisassociateSchedule=True|False
)
[REQUIRED]
A unique identifier for the cluster whose snapshot schedule you want to modify.
None
Modifies a cluster subnet group to include the specified list of VPC subnets. The operation replaces the existing list of subnets with the new list of subnets.
See also: AWS API Documentation
Request Syntax
response = client.modify_cluster_subnet_group(
ClusterSubnetGroupName='string',
Description='string',
SubnetIds=[
'string',
]
)
[REQUIRED]
The name of the subnet group to be modified.
[REQUIRED]
An array of VPC subnet IDs. A maximum of 20 subnets can be modified in a single request.
dict
Response Syntax
{
'ClusterSubnetGroup': {
'ClusterSubnetGroupName': 'string',
'Description': 'string',
'VpcId': 'string',
'SubnetGroupStatus': 'string',
'Subnets': [
{
'SubnetIdentifier': 'string',
'SubnetAvailabilityZone': {
'Name': 'string',
'SupportedPlatforms': [
{
'Name': 'string'
},
]
},
'SubnetStatus': 'string'
},
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
}
Response Structure
(dict) --
ClusterSubnetGroup (dict) --
Describes a subnet group.
ClusterSubnetGroupName (string) --
The name of the cluster subnet group.
Description (string) --
The description of the cluster subnet group.
VpcId (string) --
The VPC ID of the cluster subnet group.
SubnetGroupStatus (string) --
The status of the cluster subnet group. Possible values are Complete , Incomplete and Invalid .
Subnets (list) --
A list of the VPC Subnet elements.
(dict) --
Describes a subnet.
SubnetIdentifier (string) --
The identifier of the subnet.
SubnetAvailabilityZone (dict) --
Name (string) --
The name of the availability zone.
SupportedPlatforms (list) --
(dict) --
A list of supported platforms for orderable clusters.
SubnetStatus (string) --
The status of the subnet.
Tags (list) --
The list of tags for the cluster subnet group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Modifies an existing Amazon Redshift event notification subscription.
See also: AWS API Documentation
Request Syntax
response = client.modify_event_subscription(
SubscriptionName='string',
SnsTopicArn='string',
SourceType='string',
SourceIds=[
'string',
],
EventCategories=[
'string',
],
Severity='string',
Enabled=True|False
)
[REQUIRED]
The name of the modified Amazon Redshift event notification subscription.
The type of source that will be generating the events. For example, if you want to be notified of events generated by a cluster, you would set this parameter to cluster. If this value is not specified, events are returned for all Amazon Redshift objects in your AWS account. You must specify a source type in order to specify source IDs.
Valid values: cluster, cluster-parameter-group, cluster-security-group, and cluster-snapshot.
A list of one or more identifiers of Amazon Redshift source objects. All of the objects must be of the same type as was specified in the source type parameter. The event subscription will return only events generated by the specified objects. If not specified, then events are returned for all objects within the source type specified.
Example: my-cluster-1, my-cluster-2
Example: my-snapshot-20131010
Specifies the Amazon Redshift event categories to be published by the event notification subscription.
Values: configuration, management, monitoring, security
Specifies the Amazon Redshift event severity to be published by the event notification subscription.
Values: ERROR, INFO
dict
Response Syntax
{
'EventSubscription': {
'CustomerAwsId': 'string',
'CustSubscriptionId': 'string',
'SnsTopicArn': 'string',
'Status': 'string',
'SubscriptionCreationTime': datetime(2015, 1, 1),
'SourceType': 'string',
'SourceIdsList': [
'string',
],
'EventCategoriesList': [
'string',
],
'Severity': 'string',
'Enabled': True|False,
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
}
Response Structure
(dict) --
EventSubscription (dict) --
Describes event subscriptions.
CustomerAwsId (string) --
The AWS customer account associated with the Amazon Redshift event notification subscription.
CustSubscriptionId (string) --
The name of the Amazon Redshift event notification subscription.
SnsTopicArn (string) --
The Amazon Resource Name (ARN) of the Amazon SNS topic used by the event notification subscription.
Status (string) --
The status of the Amazon Redshift event notification subscription.
Constraints:
SubscriptionCreationTime (datetime) --
The date and time the Amazon Redshift event notification subscription was created.
SourceType (string) --
The source type of the events returned the Amazon Redshift event notification, such as cluster, or cluster-snapshot.
SourceIdsList (list) --
A list of the sources that publish events to the Amazon Redshift event notification subscription.
EventCategoriesList (list) --
The list of Amazon Redshift event categories specified in the event notification subscription.
Values: Configuration, Management, Monitoring, Security
Severity (string) --
The event severity specified in the Amazon Redshift event notification subscription.
Values: ERROR, INFO
Enabled (boolean) --
A boolean value indicating whether the subscription is enabled; true indicates that the subscription is enabled.
Tags (list) --
The list of tags for the event subscription.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Modifies the number of days to retain snapshots in the destination AWS Region after they are copied from the source AWS Region. By default, this operation only changes the retention period of copied automated snapshots. The retention periods for both new and existing copied automated snapshots are updated with the new retention period. You can set the manual option to change only the retention periods of copied manual snapshots. If you set this option, only newly copied manual snapshots have the new retention period.
See also: AWS API Documentation
Request Syntax
response = client.modify_snapshot_copy_retention_period(
ClusterIdentifier='string',
RetentionPeriod=123,
Manual=True|False
)
[REQUIRED]
The unique identifier of the cluster for which you want to change the retention period for either automated or manual snapshots that are copied to a destination AWS Region.
Constraints: Must be the valid name of an existing cluster that has cross-region snapshot copy enabled.
[REQUIRED]
The number of days to retain automated snapshots in the destination AWS Region after they are copied from the source AWS Region.
By default, this only changes the retention period of copied automated snapshots.
If you decrease the retention period for automated snapshots that are copied to a destination AWS Region, Amazon Redshift deletes any existing automated snapshots that were copied to the destination AWS Region and that fall outside of the new retention period.
Constraints: Must be at least 1 and no more than 35 for automated snapshots.
If you specify the manual option, only newly copied manual snapshots will have the new retention period.
If you specify the value of -1 newly copied manual snapshots are retained indefinitely.
Constraints: The number of days must be either -1 or an integer between 1 and 3,653 for manual snapshots.
dict
Response Syntax
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
(dict) --
Cluster (dict) --
Describes a cluster.
ClusterIdentifier (string) --
The unique identifier of the cluster.
NodeType (string) --
The node type for the nodes in the cluster.
ClusterStatus (string) --
The current state of the cluster. Possible values are the following:
ModifyStatus (string) --
The status of a modify operation, if any, initiated for the cluster.
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
DBName (string) --
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the Cluster.
Port (integer) --
The port that the database engine is listening on.
ClusterCreateTime (datetime) --
The date and time that the cluster was created.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
ClusterSecurityGroups (list) --
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
(dict) --
Describes a cluster security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
VpcSecurityGroups (list) --
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
(dict) --
Describes the members of a VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
Status (string) --
The status of the VPC security group.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
(dict) --
Describes the status of a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
ClusterParameterStatusList (list) --
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
(dict) --
Describes the status of a parameter group.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
VpcId (string) --
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
PendingModifiedValues (dict) --
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
MasterUserPassword (string) --
The pending or in-progress change of the master user password for the cluster.
NodeType (string) --
The pending or in-progress change of the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change of the number of nodes in the cluster.
ClusterType (string) --
The pending or in-progress change of the cluster type.
ClusterVersion (string) --
The pending or in-progress change of the service version.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change of the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change of the new identifier for the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change of the ability to connect to the cluster from the public network.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster will change to during the next maintenance window.
EncryptionType (string) --
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
AllowVersionUpgrade (boolean) --
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PubliclyAccessible (boolean) --
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
Encrypted (boolean) --
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
RestoreStatus (dict) --
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
Status (string) --
The status of the restore action. Returns starting, restoring, completed, or failed.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data used to restore the cluster.
ProgressInMegaBytes (integer) --
The number of megabytes that have been transferred from snapshot storage.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
DataTransferProgress (dict) --
Status (string) --
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
CurrentRateInMegaBytesPerSecond (float) --
Describes the data transfer rate in MB's per second.
TotalDataInMegaBytes (integer) --
Describes the total amount of data to be transfered in megabytes.
DataTransferredInMegaBytes (integer) --
Describes the total amount of data that has been transfered in MB's.
EstimatedTimeToCompletionInSeconds (integer) --
Describes the estimated number of seconds remaining to complete the transfer.
ElapsedTimeInSeconds (integer) --
Describes the number of seconds that have elapsed during the data transfer.
HsmStatus (dict) --
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
HsmClientCertificateIdentifier (string) --
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
HsmConfigurationIdentifier (string) --
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
ClusterSnapshotCopyStatus (dict) --
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
DestinationRegion (string) --
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
RetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
ManualSnapshotRetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
The identifier of a node in a cluster.
NodeRole (string) --
Whether the node is a leader node or a compute node.
PrivateIPAddress (string) --
The private IP address of a node within a cluster.
PublicIPAddress (string) --
The public IP address of a node within a cluster.
ElasticIpStatus (dict) --
The status of the elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP (EIP) address for the cluster.
Status (string) --
The status of the elastic IP (EIP) address.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
Tags (list) --
The list of tags for the cluster.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
KmsKeyId (string) --
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
IamRoles (list) --
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
(dict) --
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
IamRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
ApplyStatus (string) --
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
PendingActions (list) --
Cluster operations that are waiting to be started.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can resize the cluster to with the elastic resize method.
DeferredMaintenanceWindows (list) --
Describes a group of DeferredMaintenanceWindow objects.
(dict) --
Describes a deferred maintenance window
DeferMaintenanceIdentifier (string) --
A unique identifier for the maintenance window.
DeferMaintenanceStartTime (datetime) --
A timestamp for the beginning of the time period when we defer maintenance.
DeferMaintenanceEndTime (datetime) --
A timestamp for the end of the time period when we defer maintenance.
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
ResizeInfo (dict) --
Returns the following:
ResizeType (string) --
Returns the value ClassicResize .
AllowCancelResize (boolean) --
A boolean value indicating if the resize operation can be cancelled.
Modifies a snapshot schedule. Any schedule associated with a cluster is modified asynchronously.
See also: AWS API Documentation
Request Syntax
response = client.modify_snapshot_schedule(
ScheduleIdentifier='string',
ScheduleDefinitions=[
'string',
]
)
[REQUIRED]
A unique alphanumeric identifier of the schedule to modify.
[REQUIRED]
An updated list of schedule definitions. A schedule definition is made up of schedule expressions, for example, "cron(30 12 *)" or "rate(12 hours)".
dict
Response Syntax
{
'ScheduleDefinitions': [
'string',
],
'ScheduleIdentifier': 'string',
'ScheduleDescription': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'NextInvocations': [
datetime(2015, 1, 1),
],
'AssociatedClusterCount': 123,
'AssociatedClusters': [
{
'ClusterIdentifier': 'string',
'ScheduleAssociationState': 'MODIFYING'|'ACTIVE'|'FAILED'
},
]
}
Response Structure
(dict) --
Describes a snapshot schedule. You can set a regular interval for creating snapshots of a cluster. You can also schedule snapshots for specific dates.
ScheduleDefinitions (list) --
A list of ScheduleDefinitions.
ScheduleIdentifier (string) --
A unique identifier for the schedule.
ScheduleDescription (string) --
The description of the schedule.
Tags (list) --
An optional set of tags describing the schedule.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
NextInvocations (list) --
AssociatedClusterCount (integer) --
The number of clusters associated with the schedule.
AssociatedClusters (list) --
A list of clusters associated with the schedule. A maximum of 100 clusters is returned.
Allows you to purchase reserved nodes. Amazon Redshift offers a predefined set of reserved node offerings. You can purchase one or more of the offerings. You can call the DescribeReservedNodeOfferings API to obtain the available reserved node offerings. You can call this API by providing a specific reserved node offering and the number of nodes you want to reserve.
For more information about reserved node offerings, go to Purchasing Reserved Nodes in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.purchase_reserved_node_offering(
ReservedNodeOfferingId='string',
NodeCount=123
)
[REQUIRED]
The unique identifier of the reserved node offering you want to purchase.
The number of reserved nodes that you want to purchase.
Default: 1
dict
Response Syntax
{
'ReservedNode': {
'ReservedNodeId': 'string',
'ReservedNodeOfferingId': 'string',
'NodeType': 'string',
'StartTime': datetime(2015, 1, 1),
'Duration': 123,
'FixedPrice': 123.0,
'UsagePrice': 123.0,
'CurrencyCode': 'string',
'NodeCount': 123,
'State': 'string',
'OfferingType': 'string',
'RecurringCharges': [
{
'RecurringChargeAmount': 123.0,
'RecurringChargeFrequency': 'string'
},
],
'ReservedNodeOfferingType': 'Regular'|'Upgradable'
}
}
Response Structure
(dict) --
ReservedNode (dict) --
Describes a reserved node. You can call the DescribeReservedNodeOfferings API to obtain the available reserved node offerings.
ReservedNodeId (string) --
The unique identifier for the reservation.
ReservedNodeOfferingId (string) --
The identifier for the reserved node offering.
NodeType (string) --
The node type of the reserved node.
StartTime (datetime) --
The time the reservation started. You purchase a reserved node offering for a duration. This is the start time of that duration.
Duration (integer) --
The duration of the node reservation in seconds.
FixedPrice (float) --
The fixed cost Amazon Redshift charges you for this reserved node.
UsagePrice (float) --
The hourly rate Amazon Redshift charges you for this reserved node.
CurrencyCode (string) --
The currency code for the reserved cluster.
NodeCount (integer) --
The number of reserved compute nodes.
State (string) --
The state of the reserved compute node.
Possible Values:
OfferingType (string) --
The anticipated utilization of the reserved node, as defined in the reserved node offering.
RecurringCharges (list) --
The recurring charges for the reserved node.
(dict) --
Describes a recurring charge.
RecurringChargeAmount (float) --
The amount charged per the period of time specified by the recurring charge frequency.
RecurringChargeFrequency (string) --
The frequency at which the recurring charge amount is applied.
ReservedNodeOfferingType (string) --
Reboots a cluster. This action is taken as soon as possible. It results in a momentary outage to the cluster, during which the cluster status is set to rebooting . A cluster event is created when the reboot is completed. Any pending cluster modifications (see ModifyCluster ) are applied at this reboot. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.reboot_cluster(
ClusterIdentifier='string'
)
[REQUIRED]
The cluster identifier.
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
Describes a cluster.
The unique identifier of the cluster.
The node type for the nodes in the cluster.
The current state of the cluster. Possible values are the following:
The status of a modify operation, if any, initiated for the cluster.
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
The connection endpoint.
The DNS address of the Cluster.
The port that the database engine is listening on.
The date and time that the cluster was created.
The number of days that automatic cluster snapshots are retained.
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
Describes a cluster security group.
The name of the cluster security group.
The status of the cluster security group.
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
Describes the members of a VPC security group.
The identifier of the VPC security group.
The status of the VPC security group.
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
Describes the status of a parameter group.
The name of the cluster parameter group.
The status of parameter updates.
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
Describes the status of a parameter group.
The name of the parameter.
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
The error that prevented the parameter from being applied to the database.
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
The name of the Availability Zone in which the cluster is located.
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
The pending or in-progress change of the master user password for the cluster.
The pending or in-progress change of the cluster's node type.
The pending or in-progress change of the number of nodes in the cluster.
The pending or in-progress change of the cluster type.
The pending or in-progress change of the service version.
The pending or in-progress change of the automated snapshot retention period.
The pending or in-progress change of the new identifier for the cluster.
The pending or in-progress change of the ability to connect to the cluster from the public network.
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
The name of the maintenance track that the cluster will change to during the next maintenance window.
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
The version ID of the Amazon Redshift engine that is running on the cluster.
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
The number of compute nodes in the cluster.
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
The status of the restore action. Returns starting, restoring, completed, or failed.
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
The size of the set of snapshot data used to restore the cluster.
The number of megabytes that have been transferred from snapshot storage.
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
Describes the data transfer rate in MB's per second.
Describes the total amount of data to be transfered in megabytes.
Describes the total amount of data that has been transfered in MB's.
Describes the estimated number of seconds remaining to complete the transfer.
Describes the number of seconds that have elapsed during the data transfer.
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
The name of the snapshot copy grant.
The public key for the cluster.
The nodes in the cluster.
The identifier of a node in a cluster.
Whether the node is a leader node or a compute node.
The private IP address of a node within a cluster.
The public IP address of a node within a cluster.
The status of the elastic IP (EIP) address.
The elastic IP (EIP) address for the cluster.
The status of the elastic IP (EIP) address.
The specific revision number of the database in the cluster.
The list of tags for the cluster.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
Cluster operations that are waiting to be started.
The name of the maintenance track for the cluster.
The number of nodes that you can resize the cluster to with the elastic resize method.
Describes a group of DeferredMaintenanceWindow objects.
Describes a deferred maintenance window
A unique identifier for the maintenance window.
A timestamp for the beginning of the time period when we defer maintenance.
A timestamp for the end of the time period when we defer maintenance.
A unique identifier for the cluster snapshot schedule.
The current state of the cluster snapshot schedule.
Returns the following:
Returns the value ClassicResize .
A boolean value indicating if the resize operation can be cancelled.
Sets one or more parameters of the specified parameter group to their default values and sets the source values of the parameters to "engine-default". To reset the entire parameter group specify the ResetAllParameters parameter. For parameter changes to take effect you must reboot any associated clusters.
See also: AWS API Documentation
Request Syntax
response = client.reset_cluster_parameter_group(
ParameterGroupName='string',
ResetAllParameters=True|False,
Parameters=[
{
'ParameterName': 'string',
'ParameterValue': 'string',
'Description': 'string',
'Source': 'string',
'DataType': 'string',
'AllowedValues': 'string',
'ApplyType': 'static'|'dynamic',
'IsModifiable': True|False,
'MinimumEngineVersion': 'string'
},
]
)
[REQUIRED]
The name of the cluster parameter group to be reset.
If true , all parameters in the specified parameter group will be reset to their default values.
Default: true
An array of names of parameters to be reset. If ResetAllParameters option is not used, then at least one parameter name must be supplied.
Constraints: A maximum of 20 parameters can be reset in a single request.
Describes a parameter in a cluster parameter group.
The name of the parameter.
The value of the parameter.
A description of the parameter.
The source of the parameter value, such as "engine-default" or "user".
The data type of the parameter.
The valid range of values for the parameter.
Specifies how to apply the WLM configuration parameter. Some properties can be applied dynamically, while other properties require that any associated clusters be rebooted for the configuration changes to be applied. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
If true , the parameter can be modified. Some parameters have security or operational implications that prevent them from being changed.
The earliest engine version to which the parameter can apply.
dict
Response Syntax
{
'ParameterGroupName': 'string',
'ParameterGroupStatus': 'string'
}
Response Structure
(dict) --
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterGroupStatus (string) --
The status of the parameter group. For example, if you made a change to a parameter group name-value pair, then the change could be pending a reboot of an associated cluster.
Changes the size of the cluster. You can change the cluster's type, or change the number or type of nodes. The default behavior is to use the elastic resize method. With an elastic resize, your cluster is available for read and write operations more quickly than with the classic resize method.
Elastic resize operations have the following restrictions:
See also: AWS API Documentation
Request Syntax
response = client.resize_cluster(
ClusterIdentifier='string',
ClusterType='string',
NodeType='string',
NumberOfNodes=123,
Classic=True|False
)
[REQUIRED]
The unique identifier for the cluster to resize.
[REQUIRED]
The new number of nodes for the cluster.
dict
Response Syntax
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
(dict) --
Cluster (dict) --
Describes a cluster.
ClusterIdentifier (string) --
The unique identifier of the cluster.
NodeType (string) --
The node type for the nodes in the cluster.
ClusterStatus (string) --
The current state of the cluster. Possible values are the following:
ModifyStatus (string) --
The status of a modify operation, if any, initiated for the cluster.
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
DBName (string) --
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the Cluster.
Port (integer) --
The port that the database engine is listening on.
ClusterCreateTime (datetime) --
The date and time that the cluster was created.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
ClusterSecurityGroups (list) --
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
(dict) --
Describes a cluster security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
VpcSecurityGroups (list) --
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
(dict) --
Describes the members of a VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
Status (string) --
The status of the VPC security group.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
(dict) --
Describes the status of a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
ClusterParameterStatusList (list) --
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
(dict) --
Describes the status of a parameter group.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
VpcId (string) --
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
PendingModifiedValues (dict) --
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
MasterUserPassword (string) --
The pending or in-progress change of the master user password for the cluster.
NodeType (string) --
The pending or in-progress change of the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change of the number of nodes in the cluster.
ClusterType (string) --
The pending or in-progress change of the cluster type.
ClusterVersion (string) --
The pending or in-progress change of the service version.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change of the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change of the new identifier for the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change of the ability to connect to the cluster from the public network.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster will change to during the next maintenance window.
EncryptionType (string) --
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
AllowVersionUpgrade (boolean) --
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PubliclyAccessible (boolean) --
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
Encrypted (boolean) --
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
RestoreStatus (dict) --
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
Status (string) --
The status of the restore action. Returns starting, restoring, completed, or failed.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data used to restore the cluster.
ProgressInMegaBytes (integer) --
The number of megabytes that have been transferred from snapshot storage.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
DataTransferProgress (dict) --
Status (string) --
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
CurrentRateInMegaBytesPerSecond (float) --
Describes the data transfer rate in MB's per second.
TotalDataInMegaBytes (integer) --
Describes the total amount of data to be transfered in megabytes.
DataTransferredInMegaBytes (integer) --
Describes the total amount of data that has been transfered in MB's.
EstimatedTimeToCompletionInSeconds (integer) --
Describes the estimated number of seconds remaining to complete the transfer.
ElapsedTimeInSeconds (integer) --
Describes the number of seconds that have elapsed during the data transfer.
HsmStatus (dict) --
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
HsmClientCertificateIdentifier (string) --
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
HsmConfigurationIdentifier (string) --
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
ClusterSnapshotCopyStatus (dict) --
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
DestinationRegion (string) --
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
RetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
ManualSnapshotRetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
The identifier of a node in a cluster.
NodeRole (string) --
Whether the node is a leader node or a compute node.
PrivateIPAddress (string) --
The private IP address of a node within a cluster.
PublicIPAddress (string) --
The public IP address of a node within a cluster.
ElasticIpStatus (dict) --
The status of the elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP (EIP) address for the cluster.
Status (string) --
The status of the elastic IP (EIP) address.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
Tags (list) --
The list of tags for the cluster.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
KmsKeyId (string) --
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
IamRoles (list) --
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
(dict) --
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
IamRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
ApplyStatus (string) --
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
PendingActions (list) --
Cluster operations that are waiting to be started.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can resize the cluster to with the elastic resize method.
DeferredMaintenanceWindows (list) --
Describes a group of DeferredMaintenanceWindow objects.
(dict) --
Describes a deferred maintenance window
DeferMaintenanceIdentifier (string) --
A unique identifier for the maintenance window.
DeferMaintenanceStartTime (datetime) --
A timestamp for the beginning of the time period when we defer maintenance.
DeferMaintenanceEndTime (datetime) --
A timestamp for the end of the time period when we defer maintenance.
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
ResizeInfo (dict) --
Returns the following:
ResizeType (string) --
Returns the value ClassicResize .
AllowCancelResize (boolean) --
A boolean value indicating if the resize operation can be cancelled.
Creates a new cluster from a snapshot. By default, Amazon Redshift creates the resulting cluster with the same configuration as the original cluster from which the snapshot was created, except that the new cluster is created with the default cluster security and parameter groups. After Amazon Redshift creates the cluster, you can use the ModifyCluster API to associate a different security group and different parameter group with the restored cluster. If you are using a DS node type, you can also choose to change to another DS node type of the same size during restore.
If you restore a cluster into a VPC, you must provide a cluster subnet group where you want the cluster restored.
For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.restore_from_cluster_snapshot(
ClusterIdentifier='string',
SnapshotIdentifier='string',
SnapshotClusterIdentifier='string',
Port=123,
AvailabilityZone='string',
AllowVersionUpgrade=True|False,
ClusterSubnetGroupName='string',
PubliclyAccessible=True|False,
OwnerAccount='string',
HsmClientCertificateIdentifier='string',
HsmConfigurationIdentifier='string',
ElasticIp='string',
ClusterParameterGroupName='string',
ClusterSecurityGroups=[
'string',
],
VpcSecurityGroupIds=[
'string',
],
PreferredMaintenanceWindow='string',
AutomatedSnapshotRetentionPeriod=123,
ManualSnapshotRetentionPeriod=123,
KmsKeyId='string',
NodeType='string',
EnhancedVpcRouting=True|False,
AdditionalInfo='string',
IamRoles=[
'string',
],
MaintenanceTrackName='string',
SnapshotScheduleIdentifier='string'
)
[REQUIRED]
The identifier of the cluster that will be created from restoring the snapshot.
Constraints:
[REQUIRED]
The name of the snapshot from which to create the new cluster. This parameter isn't case sensitive.
Example: my-snapshot-id
The port number on which the cluster accepts connections.
Default: The same port as the original cluster.
Constraints: Must be between 1115 and 65535 .
The Amazon EC2 Availability Zone in which to restore the cluster.
Default: A random, system-chosen Availability Zone.
Example: us-east-1a
If true , major version upgrades can be applied during the maintenance window to the Amazon Redshift engine that is running on the cluster.
Default: true
The name of the subnet group where you want to cluster restored.
A snapshot of cluster in VPC can be restored only in VPC. Therefore, you must provide subnet group name where you want the cluster restored.
The name of the parameter group to be associated with this cluster.
Default: The default Amazon Redshift cluster parameter group. For information about the default parameter group, go to Working with Amazon Redshift Parameter Groups .
Constraints:
A list of security groups to be associated with this cluster.
Default: The default cluster security group for Amazon Redshift.
Cluster security groups only apply to clusters outside of VPCs.
A list of Virtual Private Cloud (VPC) security groups to be associated with the cluster.
Default: The default VPC security group is associated with the cluster.
VPC security groups only apply to clusters in VPCs.
The weekly time range (in UTC) during which automated cluster maintenance can occur.
Format: ddd:hh24:mi-ddd:hh24:mi
Default: The value selected for the cluster from which the snapshot was taken. For more information about the time blocks for each region, see Maintenance Windows in Amazon Redshift Cluster Management Guide.
Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun
Constraints: Minimum 30-minute window.
The number of days that automated snapshots are retained. If the value is 0, automated snapshots are disabled. Even if automated snapshots are disabled, you can still create manual snapshots when you want with CreateClusterSnapshot .
Default: The value selected for the cluster from which the snapshot was taken.
Constraints: Must be a value from 0 to 35.
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
The node type that the restored cluster will be provisioned with.
Default: The node type of the cluster from which the snapshot was taken. You can modify this if you are using any DS node type. In that case, you can choose to restore into another DS node type of the same size. For example, you can restore ds1.8xlarge into ds2.8xlarge, or ds1.xlarge into ds2.xlarge. If you have a DC instance type, you must restore into that same instance type and size. In other words, you can only restore a dc1.large instance type into another dc1.large instance type or dc2.large instance type. You can't restore dc1.8xlarge to dc2.8xlarge. First restore to a dc1.8xlareg cluster, then resize to a dc2.8large cluster. For more information about node types, see About Clusters and Nodes in the Amazon Redshift Cluster Management Guide .
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services. You must supply the IAM roles in their Amazon Resource Name (ARN) format. You can supply up to 10 IAM roles in a single request.
A cluster can have up to 10 IAM roles associated at any time.
dict
Response Syntax
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
(dict) --
Cluster (dict) --
Describes a cluster.
ClusterIdentifier (string) --
The unique identifier of the cluster.
NodeType (string) --
The node type for the nodes in the cluster.
ClusterStatus (string) --
The current state of the cluster. Possible values are the following:
ModifyStatus (string) --
The status of a modify operation, if any, initiated for the cluster.
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
DBName (string) --
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the Cluster.
Port (integer) --
The port that the database engine is listening on.
ClusterCreateTime (datetime) --
The date and time that the cluster was created.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
ClusterSecurityGroups (list) --
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
(dict) --
Describes a cluster security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
VpcSecurityGroups (list) --
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
(dict) --
Describes the members of a VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
Status (string) --
The status of the VPC security group.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
(dict) --
Describes the status of a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
ClusterParameterStatusList (list) --
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
(dict) --
Describes the status of a parameter group.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
VpcId (string) --
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
PendingModifiedValues (dict) --
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
MasterUserPassword (string) --
The pending or in-progress change of the master user password for the cluster.
NodeType (string) --
The pending or in-progress change of the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change of the number of nodes in the cluster.
ClusterType (string) --
The pending or in-progress change of the cluster type.
ClusterVersion (string) --
The pending or in-progress change of the service version.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change of the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change of the new identifier for the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change of the ability to connect to the cluster from the public network.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster will change to during the next maintenance window.
EncryptionType (string) --
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
AllowVersionUpgrade (boolean) --
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PubliclyAccessible (boolean) --
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
Encrypted (boolean) --
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
RestoreStatus (dict) --
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
Status (string) --
The status of the restore action. Returns starting, restoring, completed, or failed.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data used to restore the cluster.
ProgressInMegaBytes (integer) --
The number of megabytes that have been transferred from snapshot storage.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
DataTransferProgress (dict) --
Status (string) --
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
CurrentRateInMegaBytesPerSecond (float) --
Describes the data transfer rate in MB's per second.
TotalDataInMegaBytes (integer) --
Describes the total amount of data to be transfered in megabytes.
DataTransferredInMegaBytes (integer) --
Describes the total amount of data that has been transfered in MB's.
EstimatedTimeToCompletionInSeconds (integer) --
Describes the estimated number of seconds remaining to complete the transfer.
ElapsedTimeInSeconds (integer) --
Describes the number of seconds that have elapsed during the data transfer.
HsmStatus (dict) --
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
HsmClientCertificateIdentifier (string) --
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
HsmConfigurationIdentifier (string) --
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
ClusterSnapshotCopyStatus (dict) --
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
DestinationRegion (string) --
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
RetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
ManualSnapshotRetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
The identifier of a node in a cluster.
NodeRole (string) --
Whether the node is a leader node or a compute node.
PrivateIPAddress (string) --
The private IP address of a node within a cluster.
PublicIPAddress (string) --
The public IP address of a node within a cluster.
ElasticIpStatus (dict) --
The status of the elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP (EIP) address for the cluster.
Status (string) --
The status of the elastic IP (EIP) address.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
Tags (list) --
The list of tags for the cluster.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
KmsKeyId (string) --
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
IamRoles (list) --
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
(dict) --
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
IamRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
ApplyStatus (string) --
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
PendingActions (list) --
Cluster operations that are waiting to be started.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can resize the cluster to with the elastic resize method.
DeferredMaintenanceWindows (list) --
Describes a group of DeferredMaintenanceWindow objects.
(dict) --
Describes a deferred maintenance window
DeferMaintenanceIdentifier (string) --
A unique identifier for the maintenance window.
DeferMaintenanceStartTime (datetime) --
A timestamp for the beginning of the time period when we defer maintenance.
DeferMaintenanceEndTime (datetime) --
A timestamp for the end of the time period when we defer maintenance.
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
ResizeInfo (dict) --
Returns the following:
ResizeType (string) --
Returns the value ClassicResize .
AllowCancelResize (boolean) --
A boolean value indicating if the resize operation can be cancelled.
Creates a new table from a table in an Amazon Redshift cluster snapshot. You must create the new table within the Amazon Redshift cluster that the snapshot was taken from.
You cannot use RestoreTableFromClusterSnapshot to restore a table with the same name as an existing table in an Amazon Redshift cluster. That is, you cannot overwrite an existing table in a cluster with a restored table. If you want to replace your original table with a new, restored table, then rename or drop your original table before you call RestoreTableFromClusterSnapshot . When you have renamed your original table, then you can pass the original name of the table as the NewTableName parameter value in the call to RestoreTableFromClusterSnapshot . This way, you can replace the original table with the table created from the snapshot.
See also: AWS API Documentation
Request Syntax
response = client.restore_table_from_cluster_snapshot(
ClusterIdentifier='string',
SnapshotIdentifier='string',
SourceDatabaseName='string',
SourceSchemaName='string',
SourceTableName='string',
TargetDatabaseName='string',
TargetSchemaName='string',
NewTableName='string'
)
[REQUIRED]
The identifier of the Amazon Redshift cluster to restore the table to.
[REQUIRED]
The identifier of the snapshot to restore the table from. This snapshot must have been created from the Amazon Redshift cluster specified by the ClusterIdentifier parameter.
[REQUIRED]
The name of the source database that contains the table to restore from.
[REQUIRED]
The name of the source table to restore from.
[REQUIRED]
The name of the table to create as a result of the current request.
dict
Response Syntax
{
'TableRestoreStatus': {
'TableRestoreRequestId': 'string',
'Status': 'PENDING'|'IN_PROGRESS'|'SUCCEEDED'|'FAILED'|'CANCELED',
'Message': 'string',
'RequestTime': datetime(2015, 1, 1),
'ProgressInMegaBytes': 123,
'TotalDataInMegaBytes': 123,
'ClusterIdentifier': 'string',
'SnapshotIdentifier': 'string',
'SourceDatabaseName': 'string',
'SourceSchemaName': 'string',
'SourceTableName': 'string',
'TargetDatabaseName': 'string',
'TargetSchemaName': 'string',
'NewTableName': 'string'
}
}
Response Structure
(dict) --
TableRestoreStatus (dict) --
Describes the status of a RestoreTableFromClusterSnapshot operation.
TableRestoreRequestId (string) --
The unique identifier for the table restore request.
Status (string) --
A value that describes the current state of the table restore request.
Valid Values: SUCCEEDED , FAILED , CANCELED , PENDING , IN_PROGRESS
Message (string) --
A description of the status of the table restore request. Status values include SUCCEEDED , FAILED , CANCELED , PENDING , IN_PROGRESS .
RequestTime (datetime) --
The time that the table restore request was made, in Universal Coordinated Time (UTC).
ProgressInMegaBytes (integer) --
The amount of data restored to the new table so far, in megabytes (MB).
TotalDataInMegaBytes (integer) --
The total amount of data to restore to the new table, in megabytes (MB).
ClusterIdentifier (string) --
The identifier of the Amazon Redshift cluster that the table is being restored to.
SnapshotIdentifier (string) --
The identifier of the snapshot that the table is being restored from.
SourceDatabaseName (string) --
The name of the source database that contains the table being restored.
SourceSchemaName (string) --
The name of the source schema that contains the table being restored.
SourceTableName (string) --
The name of the source table being restored.
TargetDatabaseName (string) --
The name of the database to restore the table to.
TargetSchemaName (string) --
The name of the schema to restore the table to.
NewTableName (string) --
The name of the table to create as a result of the table restore request.
Revokes an ingress rule in an Amazon Redshift security group for a previously authorized IP range or Amazon EC2 security group. To add an ingress rule, see AuthorizeClusterSecurityGroupIngress . For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.revoke_cluster_security_group_ingress(
ClusterSecurityGroupName='string',
CIDRIP='string',
EC2SecurityGroupName='string',
EC2SecurityGroupOwnerId='string'
)
[REQUIRED]
The name of the security Group from which to revoke the ingress rule.
The AWS account number of the owner of the security group specified in the EC2SecurityGroupName parameter. The AWS access key ID is not an acceptable value. If EC2SecurityGroupOwnerId is specified, EC2SecurityGroupName must also be provided. and CIDRIP cannot be provided.
Example: 111122223333
dict
Response Syntax
{
'ClusterSecurityGroup': {
'ClusterSecurityGroupName': 'string',
'Description': 'string',
'EC2SecurityGroups': [
{
'Status': 'string',
'EC2SecurityGroupName': 'string',
'EC2SecurityGroupOwnerId': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'IPRanges': [
{
'Status': 'string',
'CIDRIP': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
}
Response Structure
(dict) --
ClusterSecurityGroup (dict) --
Describes a security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group to which the operation was applied.
Description (string) --
A description of the security group.
EC2SecurityGroups (list) --
A list of EC2 security groups that are permitted to access clusters associated with this cluster security group.
(dict) --
Describes an Amazon EC2 security group.
Status (string) --
The status of the EC2 security group.
EC2SecurityGroupName (string) --
The name of the EC2 Security Group.
EC2SecurityGroupOwnerId (string) --
The AWS ID of the owner of the EC2 security group specified in the EC2SecurityGroupName field.
Tags (list) --
The list of tags for the EC2 security group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
IPRanges (list) --
A list of IP ranges (CIDR blocks) that are permitted to access clusters associated with this cluster security group.
(dict) --
Describes an IP range used in a security group.
Status (string) --
The status of the IP range, for example, "authorized".
CIDRIP (string) --
The IP range in Classless Inter-Domain Routing (CIDR) notation.
Tags (list) --
The list of tags for the IP range.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Tags (list) --
The list of tags for the cluster security group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Removes the ability of the specified AWS customer account to restore the specified snapshot. If the account is currently restoring the snapshot, the restore will run to completion.
For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide .
See also: AWS API Documentation
Request Syntax
response = client.revoke_snapshot_access(
SnapshotIdentifier='string',
SnapshotClusterIdentifier='string',
AccountWithRestoreAccess='string'
)
[REQUIRED]
The identifier of the snapshot that the account can no longer access.
[REQUIRED]
The identifier of the AWS customer account that can no longer restore the specified snapshot.
dict
Response Syntax
{
'Snapshot': {
'SnapshotIdentifier': 'string',
'ClusterIdentifier': 'string',
'SnapshotCreateTime': datetime(2015, 1, 1),
'Status': 'string',
'Port': 123,
'AvailabilityZone': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'MasterUsername': 'string',
'ClusterVersion': 'string',
'SnapshotType': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'DBName': 'string',
'VpcId': 'string',
'Encrypted': True|False,
'KmsKeyId': 'string',
'EncryptedWithHSM': True|False,
'AccountsWithRestoreAccess': [
{
'AccountId': 'string',
'AccountAlias': 'string'
},
],
'OwnerAccount': 'string',
'TotalBackupSizeInMegaBytes': 123.0,
'ActualIncrementalBackupSizeInMegaBytes': 123.0,
'BackupProgressInMegaBytes': 123.0,
'CurrentBackupRateInMegaBytesPerSecond': 123.0,
'EstimatedSecondsToCompletion': 123,
'ElapsedTimeInSeconds': 123,
'SourceRegion': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'RestorableNodeTypes': [
'string',
],
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'ManualSnapshotRetentionPeriod': 123,
'ManualSnapshotRemainingDays': 123,
'SnapshotRetentionStartTime': datetime(2015, 1, 1)
}
}
Response Structure
(dict) --
Snapshot (dict) --
Describes a snapshot.
SnapshotIdentifier (string) --
The snapshot identifier that is provided in the request.
ClusterIdentifier (string) --
The identifier of the cluster for which the snapshot was taken.
SnapshotCreateTime (datetime) --
The time (in UTC format) when Amazon Redshift began the snapshot. A snapshot contains a copy of the cluster data as of this exact time.
Status (string) --
The snapshot status. The value of the status depends on the API operation used:
Port (integer) --
The port that the cluster is listening on.
AvailabilityZone (string) --
The Availability Zone in which the cluster was created.
ClusterCreateTime (datetime) --
The time (UTC) when the cluster was originally created.
MasterUsername (string) --
The master user name for the cluster.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
SnapshotType (string) --
The snapshot type. Snapshots created using CreateClusterSnapshot and CopyClusterSnapshot are of type "manual".
NodeType (string) --
The node type of the nodes in the cluster.
NumberOfNodes (integer) --
The number of nodes in the cluster.
DBName (string) --
The name of the database that was created when the cluster was created.
VpcId (string) --
The VPC identifier of the cluster if the snapshot is from a cluster in a VPC. Otherwise, this field is not in the output.
Encrypted (boolean) --
If true , the data in the snapshot is encrypted at rest.
KmsKeyId (string) --
The AWS Key Management Service (KMS) key ID of the encryption key that was used to encrypt data in the cluster from which the snapshot was taken.
EncryptedWithHSM (boolean) --
A boolean that indicates whether the snapshot data is encrypted using the HSM keys of the source cluster. true indicates that the data is encrypted using HSM keys.
AccountsWithRestoreAccess (list) --
A list of the AWS customer accounts authorized to restore the snapshot. Returns null if no accounts are authorized. Visible only to the snapshot owner.
(dict) --
Describes an AWS customer account authorized to restore a snapshot.
AccountId (string) --
The identifier of an AWS customer account authorized to restore a snapshot.
AccountAlias (string) --
The identifier of an AWS support account authorized to restore a snapshot. For AWS support, the identifier is amazon-redshift-support .
OwnerAccount (string) --
For manual snapshots, the AWS customer account used to create or copy the snapshot. For automatic snapshots, the owner of the cluster. The owner can perform all snapshot actions, such as sharing a manual snapshot.
TotalBackupSizeInMegaBytes (float) --
The size of the complete set of backup data that would be used to restore the cluster.
ActualIncrementalBackupSizeInMegaBytes (float) --
The size of the incremental backup.
BackupProgressInMegaBytes (float) --
The number of megabytes that have been transferred to the snapshot backup.
CurrentBackupRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred to the snapshot backup. Returns 0 for a completed backup.
EstimatedSecondsToCompletion (integer) --
The estimate of the time remaining before the snapshot backup will complete. Returns 0 for a completed backup.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress snapshot backup has been running, or the amount of time it took a completed backup to finish.
SourceRegion (string) --
The source region from which the snapshot was copied.
Tags (list) --
The list of tags for the cluster snapshot.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
RestorableNodeTypes (list) --
The list of node types that this cluster snapshot is able to restore into.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track for the snapshot.
ManualSnapshotRetentionPeriod (integer) --
The number of days that a manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
ManualSnapshotRemainingDays (integer) --
The number of days until a manual snapshot will pass its retention period.
SnapshotRetentionStartTime (datetime) --
A timestamp representing the start of the retention period for the snapshot.
Rotates the encryption keys for a cluster.
See also: AWS API Documentation
Request Syntax
response = client.rotate_encryption_key(
ClusterIdentifier='string'
)
[REQUIRED]
The unique identifier of the cluster that you want to rotate the encryption keys for.
Constraints: Must be the name of valid cluster that has encryption enabled.
{
'Cluster': {
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
}
}
Response Structure
Describes a cluster.
The unique identifier of the cluster.
The node type for the nodes in the cluster.
The current state of the cluster. Possible values are the following:
The status of a modify operation, if any, initiated for the cluster.
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
The connection endpoint.
The DNS address of the Cluster.
The port that the database engine is listening on.
The date and time that the cluster was created.
The number of days that automatic cluster snapshots are retained.
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
Describes a cluster security group.
The name of the cluster security group.
The status of the cluster security group.
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
Describes the members of a VPC security group.
The identifier of the VPC security group.
The status of the VPC security group.
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
Describes the status of a parameter group.
The name of the cluster parameter group.
The status of parameter updates.
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
Describes the status of a parameter group.
The name of the parameter.
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
The error that prevented the parameter from being applied to the database.
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
The name of the Availability Zone in which the cluster is located.
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
The pending or in-progress change of the master user password for the cluster.
The pending or in-progress change of the cluster's node type.
The pending or in-progress change of the number of nodes in the cluster.
The pending or in-progress change of the cluster type.
The pending or in-progress change of the service version.
The pending or in-progress change of the automated snapshot retention period.
The pending or in-progress change of the new identifier for the cluster.
The pending or in-progress change of the ability to connect to the cluster from the public network.
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
The name of the maintenance track that the cluster will change to during the next maintenance window.
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
The version ID of the Amazon Redshift engine that is running on the cluster.
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
The number of compute nodes in the cluster.
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
The status of the restore action. Returns starting, restoring, completed, or failed.
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
The size of the set of snapshot data used to restore the cluster.
The number of megabytes that have been transferred from snapshot storage.
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
Describes the data transfer rate in MB's per second.
Describes the total amount of data to be transfered in megabytes.
Describes the total amount of data that has been transfered in MB's.
Describes the estimated number of seconds remaining to complete the transfer.
Describes the number of seconds that have elapsed during the data transfer.
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
The name of the snapshot copy grant.
The public key for the cluster.
The nodes in the cluster.
The identifier of a node in a cluster.
Whether the node is a leader node or a compute node.
The private IP address of a node within a cluster.
The public IP address of a node within a cluster.
The status of the elastic IP (EIP) address.
The elastic IP (EIP) address for the cluster.
The status of the elastic IP (EIP) address.
The specific revision number of the database in the cluster.
The list of tags for the cluster.
A tag consisting of a name/value pair for a resource.
The key, or name, for the resource tag.
The value for the resource tag.
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
Cluster operations that are waiting to be started.
The name of the maintenance track for the cluster.
The number of nodes that you can resize the cluster to with the elastic resize method.
Describes a group of DeferredMaintenanceWindow objects.
Describes a deferred maintenance window
A unique identifier for the maintenance window.
A timestamp for the beginning of the time period when we defer maintenance.
A timestamp for the end of the time period when we defer maintenance.
A unique identifier for the cluster snapshot schedule.
The current state of the cluster snapshot schedule.
Returns the following:
Returns the value ClassicResize .
A boolean value indicating if the resize operation can be cancelled.
The available paginators are:
paginator = client.get_paginator('describe_cluster_db_revisions')
Creates an iterator that will paginate through responses from Redshift.Client.describe_cluster_db_revisions().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ClusterIdentifier='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ClusterDbRevisions': [
{
'ClusterIdentifier': 'string',
'CurrentDatabaseRevision': 'string',
'DatabaseRevisionReleaseDate': datetime(2015, 1, 1),
'RevisionTargets': [
{
'DatabaseRevision': 'string',
'Description': 'string',
'DatabaseRevisionReleaseDate': datetime(2015, 1, 1)
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
ClusterDbRevisions (list) --
A list of revisions.
(dict) --
Describes a ClusterDbRevision .
ClusterIdentifier (string) --
The unique identifier of the cluster.
CurrentDatabaseRevision (string) --
A string representing the current cluster version.
DatabaseRevisionReleaseDate (datetime) --
The date on which the database revision was released.
RevisionTargets (list) --
A list of RevisionTarget objects, where each object describes the database revision that a cluster can be updated to.
(dict) --
Describes a RevisionTarget .
DatabaseRevision (string) --
A unique string that identifies the version to update the cluster to. You can use this value in ModifyClusterDbRevision .
Description (string) --
A string that describes the changes and features that will be applied to the cluster when it is updated to the corresponding ClusterDbRevision .
DatabaseRevisionReleaseDate (datetime) --
The date on which the database revision was released.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_cluster_parameter_groups')
Creates an iterator that will paginate through responses from Redshift.Client.describe_cluster_parameter_groups().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ParameterGroupName='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A tag key or keys for which you want to return all matching cluster parameter groups that are associated with the specified key or keys. For example, suppose that you have parameter groups that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the parameter groups that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching cluster parameter groups that are associated with the specified tag value or values. For example, suppose that you have parameter groups that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the parameter groups that have either or both of these tag values associated with them.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterGroupFamily': 'string',
'Description': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Contains the output from the DescribeClusterParameterGroups action.
ParameterGroups (list) --
A list of ClusterParameterGroup instances. Each instance describes one cluster parameter group.
(dict) --
Describes a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterGroupFamily (string) --
The name of the cluster parameter group family that this cluster parameter group is compatible with.
Description (string) --
The description of the parameter group.
Tags (list) --
The list of tags for the cluster parameter group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_cluster_parameters')
Creates an iterator that will paginate through responses from Redshift.Client.describe_cluster_parameters().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ParameterGroupName='string',
Source='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The name of a cluster parameter group for which to return details.
The parameter types to return. Specify user to show parameters that are different form the default. Similarly, specify engine-default to show parameters that are the same as the default parameter group.
Default: All parameter types returned.
Valid Values: user | engine-default
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Parameters': [
{
'ParameterName': 'string',
'ParameterValue': 'string',
'Description': 'string',
'Source': 'string',
'DataType': 'string',
'AllowedValues': 'string',
'ApplyType': 'static'|'dynamic',
'IsModifiable': True|False,
'MinimumEngineVersion': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Contains the output from the DescribeClusterParameters action.
Parameters (list) --
A list of Parameter instances. Each instance lists the parameters of one cluster parameter group.
(dict) --
Describes a parameter in a cluster parameter group.
ParameterName (string) --
The name of the parameter.
ParameterValue (string) --
The value of the parameter.
Description (string) --
A description of the parameter.
Source (string) --
The source of the parameter value, such as "engine-default" or "user".
DataType (string) --
The data type of the parameter.
AllowedValues (string) --
The valid range of values for the parameter.
ApplyType (string) --
Specifies how to apply the WLM configuration parameter. Some properties can be applied dynamically, while other properties require that any associated clusters be rebooted for the configuration changes to be applied. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
IsModifiable (boolean) --
If true , the parameter can be modified. Some parameters have security or operational implications that prevent them from being changed.
MinimumEngineVersion (string) --
The earliest engine version to which the parameter can apply.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_cluster_security_groups')
Creates an iterator that will paginate through responses from Redshift.Client.describe_cluster_security_groups().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ClusterSecurityGroupName='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The name of a cluster security group for which you are requesting details. You can specify either the Marker parameter or a ClusterSecurityGroupName parameter, but not both.
Example: securitygroup1
A tag key or keys for which you want to return all matching cluster security groups that are associated with the specified key or keys. For example, suppose that you have security groups that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the security groups that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching cluster security groups that are associated with the specified tag value or values. For example, suppose that you have security groups that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the security groups that have either or both of these tag values associated with them.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Description': 'string',
'EC2SecurityGroups': [
{
'Status': 'string',
'EC2SecurityGroupName': 'string',
'EC2SecurityGroupOwnerId': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'IPRanges': [
{
'Status': 'string',
'CIDRIP': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
ClusterSecurityGroups (list) --
A list of ClusterSecurityGroup instances.
(dict) --
Describes a security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group to which the operation was applied.
Description (string) --
A description of the security group.
EC2SecurityGroups (list) --
A list of EC2 security groups that are permitted to access clusters associated with this cluster security group.
(dict) --
Describes an Amazon EC2 security group.
Status (string) --
The status of the EC2 security group.
EC2SecurityGroupName (string) --
The name of the EC2 Security Group.
EC2SecurityGroupOwnerId (string) --
The AWS ID of the owner of the EC2 security group specified in the EC2SecurityGroupName field.
Tags (list) --
The list of tags for the EC2 security group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
IPRanges (list) --
A list of IP ranges (CIDR blocks) that are permitted to access clusters associated with this cluster security group.
(dict) --
Describes an IP range used in a security group.
Status (string) --
The status of the IP range, for example, "authorized".
CIDRIP (string) --
The IP range in Classless Inter-Domain Routing (CIDR) notation.
Tags (list) --
The list of tags for the IP range.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
Tags (list) --
The list of tags for the cluster security group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_cluster_snapshots')
Creates an iterator that will paginate through responses from Redshift.Client.describe_cluster_snapshots().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ClusterIdentifier='string',
SnapshotIdentifier='string',
SnapshotType='string',
StartTime=datetime(2015, 1, 1),
EndTime=datetime(2015, 1, 1),
OwnerAccount='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
ClusterExists=True|False,
SortingEntities=[
{
'Attribute': 'SOURCE_TYPE'|'TOTAL_SIZE'|'CREATE_TIME',
'SortOrder': 'ASC'|'DESC'
},
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The type of snapshots for which you are requesting information. By default, snapshots of all types are returned.
Valid Values: automated | manual
A value that requests only snapshots created at or after the specified time. The time value is specified in ISO 8601 format. For more information about ISO 8601, go to the ISO8601 Wikipedia page.
Example: 2012-07-16T18:00:00Z
A time value that requests only snapshots created at or before the specified time. The time value is specified in ISO 8601 format. For more information about ISO 8601, go to the ISO8601 Wikipedia page.
Example: 2012-07-16T18:00:00Z
A tag key or keys for which you want to return all matching cluster snapshots that are associated with the specified key or keys. For example, suppose that you have snapshots that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the snapshots that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching cluster snapshots that are associated with the specified tag value or values. For example, suppose that you have snapshots that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the snapshots that have either or both of these tag values associated with them.
A value that indicates whether to return snapshots only for an existing cluster. You can perform table-level restore only by using a snapshot of an existing cluster, that is, a cluster that has not been deleted. Values for this parameter work as follows:
Describes a sorting entity
The category for sorting the snapshots.
The order for listing the attributes.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Snapshots': [
{
'SnapshotIdentifier': 'string',
'ClusterIdentifier': 'string',
'SnapshotCreateTime': datetime(2015, 1, 1),
'Status': 'string',
'Port': 123,
'AvailabilityZone': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'MasterUsername': 'string',
'ClusterVersion': 'string',
'SnapshotType': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'DBName': 'string',
'VpcId': 'string',
'Encrypted': True|False,
'KmsKeyId': 'string',
'EncryptedWithHSM': True|False,
'AccountsWithRestoreAccess': [
{
'AccountId': 'string',
'AccountAlias': 'string'
},
],
'OwnerAccount': 'string',
'TotalBackupSizeInMegaBytes': 123.0,
'ActualIncrementalBackupSizeInMegaBytes': 123.0,
'BackupProgressInMegaBytes': 123.0,
'CurrentBackupRateInMegaBytesPerSecond': 123.0,
'EstimatedSecondsToCompletion': 123,
'ElapsedTimeInSeconds': 123,
'SourceRegion': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'RestorableNodeTypes': [
'string',
],
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'ManualSnapshotRetentionPeriod': 123,
'ManualSnapshotRemainingDays': 123,
'SnapshotRetentionStartTime': datetime(2015, 1, 1)
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Contains the output from the DescribeClusterSnapshots action.
Snapshots (list) --
A list of Snapshot instances.
(dict) --
Describes a snapshot.
SnapshotIdentifier (string) --
The snapshot identifier that is provided in the request.
ClusterIdentifier (string) --
The identifier of the cluster for which the snapshot was taken.
SnapshotCreateTime (datetime) --
The time (in UTC format) when Amazon Redshift began the snapshot. A snapshot contains a copy of the cluster data as of this exact time.
Status (string) --
The snapshot status. The value of the status depends on the API operation used:
Port (integer) --
The port that the cluster is listening on.
AvailabilityZone (string) --
The Availability Zone in which the cluster was created.
ClusterCreateTime (datetime) --
The time (UTC) when the cluster was originally created.
MasterUsername (string) --
The master user name for the cluster.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
SnapshotType (string) --
The snapshot type. Snapshots created using CreateClusterSnapshot and CopyClusterSnapshot are of type "manual".
NodeType (string) --
The node type of the nodes in the cluster.
NumberOfNodes (integer) --
The number of nodes in the cluster.
DBName (string) --
The name of the database that was created when the cluster was created.
VpcId (string) --
The VPC identifier of the cluster if the snapshot is from a cluster in a VPC. Otherwise, this field is not in the output.
Encrypted (boolean) --
If true , the data in the snapshot is encrypted at rest.
KmsKeyId (string) --
The AWS Key Management Service (KMS) key ID of the encryption key that was used to encrypt data in the cluster from which the snapshot was taken.
EncryptedWithHSM (boolean) --
A boolean that indicates whether the snapshot data is encrypted using the HSM keys of the source cluster. true indicates that the data is encrypted using HSM keys.
AccountsWithRestoreAccess (list) --
A list of the AWS customer accounts authorized to restore the snapshot. Returns null if no accounts are authorized. Visible only to the snapshot owner.
(dict) --
Describes an AWS customer account authorized to restore a snapshot.
AccountId (string) --
The identifier of an AWS customer account authorized to restore a snapshot.
AccountAlias (string) --
The identifier of an AWS support account authorized to restore a snapshot. For AWS support, the identifier is amazon-redshift-support .
OwnerAccount (string) --
For manual snapshots, the AWS customer account used to create or copy the snapshot. For automatic snapshots, the owner of the cluster. The owner can perform all snapshot actions, such as sharing a manual snapshot.
TotalBackupSizeInMegaBytes (float) --
The size of the complete set of backup data that would be used to restore the cluster.
ActualIncrementalBackupSizeInMegaBytes (float) --
The size of the incremental backup.
BackupProgressInMegaBytes (float) --
The number of megabytes that have been transferred to the snapshot backup.
CurrentBackupRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred to the snapshot backup. Returns 0 for a completed backup.
EstimatedSecondsToCompletion (integer) --
The estimate of the time remaining before the snapshot backup will complete. Returns 0 for a completed backup.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress snapshot backup has been running, or the amount of time it took a completed backup to finish.
SourceRegion (string) --
The source region from which the snapshot was copied.
Tags (list) --
The list of tags for the cluster snapshot.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
RestorableNodeTypes (list) --
The list of node types that this cluster snapshot is able to restore into.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track for the snapshot.
ManualSnapshotRetentionPeriod (integer) --
The number of days that a manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
ManualSnapshotRemainingDays (integer) --
The number of days until a manual snapshot will pass its retention period.
SnapshotRetentionStartTime (datetime) --
A timestamp representing the start of the retention period for the snapshot.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_cluster_subnet_groups')
Creates an iterator that will paginate through responses from Redshift.Client.describe_cluster_subnet_groups().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ClusterSubnetGroupName='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A tag key or keys for which you want to return all matching cluster subnet groups that are associated with the specified key or keys. For example, suppose that you have subnet groups that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the subnet groups that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching cluster subnet groups that are associated with the specified tag value or values. For example, suppose that you have subnet groups that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the subnet groups that have either or both of these tag values associated with them.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ClusterSubnetGroups': [
{
'ClusterSubnetGroupName': 'string',
'Description': 'string',
'VpcId': 'string',
'SubnetGroupStatus': 'string',
'Subnets': [
{
'SubnetIdentifier': 'string',
'SubnetAvailabilityZone': {
'Name': 'string',
'SupportedPlatforms': [
{
'Name': 'string'
},
]
},
'SubnetStatus': 'string'
},
],
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Contains the output from the DescribeClusterSubnetGroups action.
ClusterSubnetGroups (list) --
A list of ClusterSubnetGroup instances.
(dict) --
Describes a subnet group.
ClusterSubnetGroupName (string) --
The name of the cluster subnet group.
Description (string) --
The description of the cluster subnet group.
VpcId (string) --
The VPC ID of the cluster subnet group.
SubnetGroupStatus (string) --
The status of the cluster subnet group. Possible values are Complete , Incomplete and Invalid .
Subnets (list) --
A list of the VPC Subnet elements.
(dict) --
Describes a subnet.
SubnetIdentifier (string) --
The identifier of the subnet.
SubnetAvailabilityZone (dict) --
Name (string) --
The name of the availability zone.
SupportedPlatforms (list) --
(dict) --
A list of supported platforms for orderable clusters.
SubnetStatus (string) --
The status of the subnet.
Tags (list) --
The list of tags for the cluster subnet group.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_cluster_tracks')
Creates an iterator that will paginate through responses from Redshift.Client.describe_cluster_tracks().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
MaintenanceTrackName='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'MaintenanceTracks': [
{
'MaintenanceTrackName': 'string',
'DatabaseVersion': 'string',
'UpdateTargets': [
{
'MaintenanceTrackName': 'string',
'DatabaseVersion': 'string',
'SupportedOperations': [
{
'OperationName': 'string'
},
]
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
MaintenanceTracks (list) --
A list of maintenance tracks output by the DescribeClusterTracks operation.
(dict) --
Defines a maintenance track that determines which Amazon Redshift version to apply during a maintenance window. If the value for MaintenanceTrack is current , the cluster is updated to the most recently certified maintenance release. If the value is trailing , the cluster is updated to the previously certified maintenance release.
MaintenanceTrackName (string) --
The name of the maintenance track. Possible values are current and trailing .
DatabaseVersion (string) --
The version number for the cluster release.
UpdateTargets (list) --
An array of UpdateTarget objects to update with the maintenance track.
(dict) --
A maintenance track that you can switch the current track to.
MaintenanceTrackName (string) --
The name of the new maintenance track.
DatabaseVersion (string) --
The cluster version for the new maintenance track.
SupportedOperations (list) --
A list of operations supported by the maintenance track.
(dict) --
Describes the operations that are allowed on a maintenance track.
OperationName (string) --
A list of the supported operations.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_cluster_versions')
Creates an iterator that will paginate through responses from Redshift.Client.describe_cluster_versions().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ClusterVersion='string',
ClusterParameterGroupFamily='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The specific cluster version to return.
Example: 1.0
The name of a specific cluster parameter group family to return details for.
Constraints:
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ClusterVersions': [
{
'ClusterVersion': 'string',
'ClusterParameterGroupFamily': 'string',
'Description': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Contains the output from the DescribeClusterVersions action.
ClusterVersions (list) --
A list of Version elements.
(dict) --
Describes a cluster version, including the parameter group family and description of the version.
ClusterVersion (string) --
The version number used by the cluster.
ClusterParameterGroupFamily (string) --
The name of the cluster parameter group family for the cluster.
Description (string) --
The description of the cluster version.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_clusters')
Creates an iterator that will paginate through responses from Redshift.Client.describe_clusters().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ClusterIdentifier='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The unique identifier of a cluster whose properties you are requesting. This parameter is case sensitive.
The default is that all clusters defined for an account are returned.
A tag key or keys for which you want to return all matching clusters that are associated with the specified key or keys. For example, suppose that you have clusters that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the clusters that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching clusters that are associated with the specified tag value or values. For example, suppose that you have clusters that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the clusters that have either or both of these tag values associated with them.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Clusters': [
{
'ClusterIdentifier': 'string',
'NodeType': 'string',
'ClusterStatus': 'string',
'ModifyStatus': 'string',
'MasterUsername': 'string',
'DBName': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'ClusterCreateTime': datetime(2015, 1, 1),
'AutomatedSnapshotRetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'ClusterSecurityGroups': [
{
'ClusterSecurityGroupName': 'string',
'Status': 'string'
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'ClusterParameterGroups': [
{
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'ClusterParameterStatusList': [
{
'ParameterName': 'string',
'ParameterApplyStatus': 'string',
'ParameterApplyErrorDescription': 'string'
},
]
},
],
'ClusterSubnetGroupName': 'string',
'VpcId': 'string',
'AvailabilityZone': 'string',
'PreferredMaintenanceWindow': 'string',
'PendingModifiedValues': {
'MasterUserPassword': 'string',
'NodeType': 'string',
'NumberOfNodes': 123,
'ClusterType': 'string',
'ClusterVersion': 'string',
'AutomatedSnapshotRetentionPeriod': 123,
'ClusterIdentifier': 'string',
'PubliclyAccessible': True|False,
'EnhancedVpcRouting': True|False,
'MaintenanceTrackName': 'string',
'EncryptionType': 'string'
},
'ClusterVersion': 'string',
'AllowVersionUpgrade': True|False,
'NumberOfNodes': 123,
'PubliclyAccessible': True|False,
'Encrypted': True|False,
'RestoreStatus': {
'Status': 'string',
'CurrentRestoreRateInMegaBytesPerSecond': 123.0,
'SnapshotSizeInMegaBytes': 123,
'ProgressInMegaBytes': 123,
'ElapsedTimeInSeconds': 123,
'EstimatedTimeToCompletionInSeconds': 123
},
'DataTransferProgress': {
'Status': 'string',
'CurrentRateInMegaBytesPerSecond': 123.0,
'TotalDataInMegaBytes': 123,
'DataTransferredInMegaBytes': 123,
'EstimatedTimeToCompletionInSeconds': 123,
'ElapsedTimeInSeconds': 123
},
'HsmStatus': {
'HsmClientCertificateIdentifier': 'string',
'HsmConfigurationIdentifier': 'string',
'Status': 'string'
},
'ClusterSnapshotCopyStatus': {
'DestinationRegion': 'string',
'RetentionPeriod': 123,
'ManualSnapshotRetentionPeriod': 123,
'SnapshotCopyGrantName': 'string'
},
'ClusterPublicKey': 'string',
'ClusterNodes': [
{
'NodeRole': 'string',
'PrivateIPAddress': 'string',
'PublicIPAddress': 'string'
},
],
'ElasticIpStatus': {
'ElasticIp': 'string',
'Status': 'string'
},
'ClusterRevisionNumber': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'KmsKeyId': 'string',
'EnhancedVpcRouting': True|False,
'IamRoles': [
{
'IamRoleArn': 'string',
'ApplyStatus': 'string'
},
],
'PendingActions': [
'string',
],
'MaintenanceTrackName': 'string',
'ElasticResizeNumberOfNodeOptions': 'string',
'DeferredMaintenanceWindows': [
{
'DeferMaintenanceIdentifier': 'string',
'DeferMaintenanceStartTime': datetime(2015, 1, 1),
'DeferMaintenanceEndTime': datetime(2015, 1, 1)
},
],
'SnapshotScheduleIdentifier': 'string',
'SnapshotScheduleState': 'MODIFYING'|'ACTIVE'|'FAILED',
'ResizeInfo': {
'ResizeType': 'string',
'AllowCancelResize': True|False
}
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Contains the output from the DescribeClusters action.
Clusters (list) --
A list of Cluster objects, where each object describes one cluster.
(dict) --
Describes a cluster.
ClusterIdentifier (string) --
The unique identifier of the cluster.
NodeType (string) --
The node type for the nodes in the cluster.
ClusterStatus (string) --
The current state of the cluster. Possible values are the following:
ModifyStatus (string) --
The status of a modify operation, if any, initiated for the cluster.
MasterUsername (string) --
The master user name for the cluster. This name is used to connect to the database that is specified in the DBName parameter.
DBName (string) --
The name of the initial database that was created when the cluster was created. This same name is returned for the life of the cluster. If an initial database was not specified, a database named dev dev was created by default.
Endpoint (dict) --
The connection endpoint.
Address (string) --
The DNS address of the Cluster.
Port (integer) --
The port that the database engine is listening on.
ClusterCreateTime (datetime) --
The date and time that the cluster was created.
AutomatedSnapshotRetentionPeriod (integer) --
The number of days that automatic cluster snapshots are retained.
ManualSnapshotRetentionPeriod (integer) --
The default number of days to retain a manual snapshot. If the value is -1, the snapshot is retained indefinitely. This setting doesn't change the retention period of existing snapshots.
The value must be either -1 or an integer between 1 and 3,653.
ClusterSecurityGroups (list) --
A list of cluster security group that are associated with the cluster. Each security group is represented by an element that contains ClusterSecurityGroup.Name and ClusterSecurityGroup.Status subelements.
Cluster security groups are used when the cluster is not created in an Amazon Virtual Private Cloud (VPC). Clusters that are created in a VPC use VPC security groups, which are listed by the VpcSecurityGroups parameter.
(dict) --
Describes a cluster security group.
ClusterSecurityGroupName (string) --
The name of the cluster security group.
Status (string) --
The status of the cluster security group.
VpcSecurityGroups (list) --
A list of Amazon Virtual Private Cloud (Amazon VPC) security groups that are associated with the cluster. This parameter is returned only if the cluster is in a VPC.
(dict) --
Describes the members of a VPC security group.
VpcSecurityGroupId (string) --
The identifier of the VPC security group.
Status (string) --
The status of the VPC security group.
ClusterParameterGroups (list) --
The list of cluster parameter groups that are associated with this cluster. Each parameter group in the list is returned with its status.
(dict) --
Describes the status of a parameter group.
ParameterGroupName (string) --
The name of the cluster parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
ClusterParameterStatusList (list) --
The list of parameter statuses.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
(dict) --
Describes the status of a parameter group.
ParameterName (string) --
The name of the parameter.
ParameterApplyStatus (string) --
The status of the parameter that indicates whether the parameter is in sync with the database, waiting for a cluster reboot, or encountered an error when being applied.
The following are possible statuses and descriptions.
ParameterApplyErrorDescription (string) --
The error that prevented the parameter from being applied to the database.
ClusterSubnetGroupName (string) --
The name of the subnet group that is associated with the cluster. This parameter is valid only when the cluster is in a VPC.
VpcId (string) --
The identifier of the VPC the cluster is in, if the cluster is in a VPC.
AvailabilityZone (string) --
The name of the Availability Zone in which the cluster is located.
PreferredMaintenanceWindow (string) --
The weekly time range, in Universal Coordinated Time (UTC), during which system maintenance can occur.
PendingModifiedValues (dict) --
A value that, if present, indicates that changes to the cluster are pending. Specific pending changes are identified by subelements.
MasterUserPassword (string) --
The pending or in-progress change of the master user password for the cluster.
NodeType (string) --
The pending or in-progress change of the cluster's node type.
NumberOfNodes (integer) --
The pending or in-progress change of the number of nodes in the cluster.
ClusterType (string) --
The pending or in-progress change of the cluster type.
ClusterVersion (string) --
The pending or in-progress change of the service version.
AutomatedSnapshotRetentionPeriod (integer) --
The pending or in-progress change of the automated snapshot retention period.
ClusterIdentifier (string) --
The pending or in-progress change of the new identifier for the cluster.
PubliclyAccessible (boolean) --
The pending or in-progress change of the ability to connect to the cluster from the public network.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
MaintenanceTrackName (string) --
The name of the maintenance track that the cluster will change to during the next maintenance window.
EncryptionType (string) --
The encryption type for a cluster. Possible values are: KMS and None. For the China region the possible values are None, and Legacy.
ClusterVersion (string) --
The version ID of the Amazon Redshift engine that is running on the cluster.
AllowVersionUpgrade (boolean) --
A boolean value that, if true , indicates that major version upgrades will be applied automatically to the cluster during the maintenance window.
NumberOfNodes (integer) --
The number of compute nodes in the cluster.
PubliclyAccessible (boolean) --
A boolean value that, if true , indicates that the cluster can be accessed from a public network.
Encrypted (boolean) --
A boolean value that, if true , indicates that data in the cluster is encrypted at rest.
RestoreStatus (dict) --
A value that describes the status of a cluster restore action. This parameter returns null if the cluster was not created by restoring a snapshot.
Status (string) --
The status of the restore action. Returns starting, restoring, completed, or failed.
CurrentRestoreRateInMegaBytesPerSecond (float) --
The number of megabytes per second being transferred from the backup storage. Returns the average rate for a completed backup.
SnapshotSizeInMegaBytes (integer) --
The size of the set of snapshot data used to restore the cluster.
ProgressInMegaBytes (integer) --
The number of megabytes that have been transferred from snapshot storage.
ElapsedTimeInSeconds (integer) --
The amount of time an in-progress restore has been running, or the amount of time it took a completed restore to finish.
EstimatedTimeToCompletionInSeconds (integer) --
The estimate of the time remaining before the restore will complete. Returns 0 for a completed restore.
DataTransferProgress (dict) --
Status (string) --
Describes the status of the cluster. While the transfer is in progress the status is transferringdata .
CurrentRateInMegaBytesPerSecond (float) --
Describes the data transfer rate in MB's per second.
TotalDataInMegaBytes (integer) --
Describes the total amount of data to be transfered in megabytes.
DataTransferredInMegaBytes (integer) --
Describes the total amount of data that has been transfered in MB's.
EstimatedTimeToCompletionInSeconds (integer) --
Describes the estimated number of seconds remaining to complete the transfer.
ElapsedTimeInSeconds (integer) --
Describes the number of seconds that have elapsed during the data transfer.
HsmStatus (dict) --
A value that reports whether the Amazon Redshift cluster has finished applying any hardware security module (HSM) settings changes specified in a modify cluster command.
Values: active, applying
HsmClientCertificateIdentifier (string) --
Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.
HsmConfigurationIdentifier (string) --
Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
Status (string) --
Reports whether the Amazon Redshift cluster has finished applying any HSM settings changes specified in a modify cluster command.
Values: active, applying
ClusterSnapshotCopyStatus (dict) --
A value that returns the destination region and retention period that are configured for cross-region snapshot copy.
DestinationRegion (string) --
The destination region that snapshots are automatically copied to when cross-region snapshot copy is enabled.
RetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region.
ManualSnapshotRetentionPeriod (integer) --
The number of days that automated snapshots are retained in the destination region after they are copied from a source region. If the value is -1, the manual snapshot is retained indefinitely.
The value must be either -1 or an integer between 1 and 3,653.
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
ClusterPublicKey (string) --
The public key for the cluster.
ClusterNodes (list) --
The nodes in the cluster.
(dict) --
The identifier of a node in a cluster.
NodeRole (string) --
Whether the node is a leader node or a compute node.
PrivateIPAddress (string) --
The private IP address of a node within a cluster.
PublicIPAddress (string) --
The public IP address of a node within a cluster.
ElasticIpStatus (dict) --
The status of the elastic IP (EIP) address.
ElasticIp (string) --
The elastic IP (EIP) address for the cluster.
Status (string) --
The status of the elastic IP (EIP) address.
ClusterRevisionNumber (string) --
The specific revision number of the database in the cluster.
Tags (list) --
The list of tags for the cluster.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
KmsKeyId (string) --
The AWS Key Management Service (AWS KMS) key ID of the encryption key used to encrypt data in the cluster.
EnhancedVpcRouting (boolean) --
An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.
If this option is true , enhanced VPC routing is enabled.
Default: false
IamRoles (list) --
A list of AWS Identity and Access Management (IAM) roles that can be used by the cluster to access other AWS services.
(dict) --
An AWS Identity and Access Management (IAM) role that can be used by the associated Amazon Redshift cluster to access other AWS services.
IamRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role, for example, arn:aws:iam::123456789012:role/RedshiftCopyUnload .
ApplyStatus (string) --
A value that describes the status of the IAM role's association with an Amazon Redshift cluster.
The following are possible statuses and descriptions.
PendingActions (list) --
Cluster operations that are waiting to be started.
MaintenanceTrackName (string) --
The name of the maintenance track for the cluster.
ElasticResizeNumberOfNodeOptions (string) --
The number of nodes that you can resize the cluster to with the elastic resize method.
DeferredMaintenanceWindows (list) --
Describes a group of DeferredMaintenanceWindow objects.
(dict) --
Describes a deferred maintenance window
DeferMaintenanceIdentifier (string) --
A unique identifier for the maintenance window.
DeferMaintenanceStartTime (datetime) --
A timestamp for the beginning of the time period when we defer maintenance.
DeferMaintenanceEndTime (datetime) --
A timestamp for the end of the time period when we defer maintenance.
SnapshotScheduleIdentifier (string) --
A unique identifier for the cluster snapshot schedule.
SnapshotScheduleState (string) --
The current state of the cluster snapshot schedule.
ResizeInfo (dict) --
Returns the following:
ResizeType (string) --
Returns the value ClassicResize .
AllowCancelResize (boolean) --
A boolean value indicating if the resize operation can be cancelled.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_default_cluster_parameters')
Creates an iterator that will paginate through responses from Redshift.Client.describe_default_cluster_parameters().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ParameterGroupFamily='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
The name of the cluster parameter group family.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'DefaultClusterParameters': {
'ParameterGroupFamily': 'string',
'Marker': 'string',
'Parameters': [
{
'ParameterName': 'string',
'ParameterValue': 'string',
'Description': 'string',
'Source': 'string',
'DataType': 'string',
'AllowedValues': 'string',
'ApplyType': 'static'|'dynamic',
'IsModifiable': True|False,
'MinimumEngineVersion': 'string'
},
]
},
'NextToken': 'string'
}
Response Structure
(dict) --
DefaultClusterParameters (dict) --
Describes the default cluster parameters for a parameter group family.
ParameterGroupFamily (string) --
The name of the cluster parameter group family to which the engine default parameters apply.
Marker (string) --
A value that indicates the starting point for the next set of response records in a subsequent request. If a value is returned in a response, you can retrieve the next set of records by providing this returned marker value in the Marker parameter and retrying the command. If the Marker field is empty, all response records have been retrieved for the request.
Parameters (list) --
The list of cluster default parameters.
(dict) --
Describes a parameter in a cluster parameter group.
ParameterName (string) --
The name of the parameter.
ParameterValue (string) --
The value of the parameter.
Description (string) --
A description of the parameter.
Source (string) --
The source of the parameter value, such as "engine-default" or "user".
DataType (string) --
The data type of the parameter.
AllowedValues (string) --
The valid range of values for the parameter.
ApplyType (string) --
Specifies how to apply the WLM configuration parameter. Some properties can be applied dynamically, while other properties require that any associated clusters be rebooted for the configuration changes to be applied. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide .
IsModifiable (boolean) --
If true , the parameter can be modified. Some parameters have security or operational implications that prevent them from being changed.
MinimumEngineVersion (string) --
The earliest engine version to which the parameter can apply.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_event_subscriptions')
Creates an iterator that will paginate through responses from Redshift.Client.describe_event_subscriptions().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
SubscriptionName='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A tag key or keys for which you want to return all matching event notification subscriptions that are associated with the specified key or keys. For example, suppose that you have subscriptions that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the subscriptions that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching event notification subscriptions that are associated with the specified tag value or values. For example, suppose that you have subscriptions that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the subscriptions that have either or both of these tag values associated with them.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'EventSubscriptionsList': [
{
'CustomerAwsId': 'string',
'CustSubscriptionId': 'string',
'SnsTopicArn': 'string',
'Status': 'string',
'SubscriptionCreationTime': datetime(2015, 1, 1),
'SourceType': 'string',
'SourceIdsList': [
'string',
],
'EventCategoriesList': [
'string',
],
'Severity': 'string',
'Enabled': True|False,
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
EventSubscriptionsList (list) --
A list of event subscriptions.
(dict) --
Describes event subscriptions.
CustomerAwsId (string) --
The AWS customer account associated with the Amazon Redshift event notification subscription.
CustSubscriptionId (string) --
The name of the Amazon Redshift event notification subscription.
SnsTopicArn (string) --
The Amazon Resource Name (ARN) of the Amazon SNS topic used by the event notification subscription.
Status (string) --
The status of the Amazon Redshift event notification subscription.
Constraints:
SubscriptionCreationTime (datetime) --
The date and time the Amazon Redshift event notification subscription was created.
SourceType (string) --
The source type of the events returned the Amazon Redshift event notification, such as cluster, or cluster-snapshot.
SourceIdsList (list) --
A list of the sources that publish events to the Amazon Redshift event notification subscription.
EventCategoriesList (list) --
The list of Amazon Redshift event categories specified in the event notification subscription.
Values: Configuration, Management, Monitoring, Security
Severity (string) --
The event severity specified in the Amazon Redshift event notification subscription.
Values: ERROR, INFO
Enabled (boolean) --
A boolean value indicating whether the subscription is enabled; true indicates that the subscription is enabled.
Tags (list) --
The list of tags for the event subscription.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_events')
Creates an iterator that will paginate through responses from Redshift.Client.describe_events().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
SourceIdentifier='string',
SourceType='cluster'|'cluster-parameter-group'|'cluster-security-group'|'cluster-snapshot',
StartTime=datetime(2015, 1, 1),
EndTime=datetime(2015, 1, 1),
Duration=123,
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The identifier of the event source for which events will be returned. If this parameter is not specified, then all sources are included in the response.
Constraints:
If SourceIdentifier is supplied, SourceType must also be provided.
The event source to retrieve events for. If no value is specified, all events are returned.
Constraints:
If SourceType is supplied, SourceIdentifier must also be provided.
The beginning of the time interval to retrieve events for, specified in ISO 8601 format. For more information about ISO 8601, go to the ISO8601 Wikipedia page.
Example: 2009-07-08T18:00Z
The end of the time interval for which to retrieve events, specified in ISO 8601 format. For more information about ISO 8601, go to the ISO8601 Wikipedia page.
Example: 2009-07-08T18:00Z
The number of minutes prior to the time of the request for which to retrieve events. For example, if the request is sent at 18:00 and you specify a duration of 60, then only events which have occurred after 17:00 will be returned.
Default: 60
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'Events': [
{
'SourceIdentifier': 'string',
'SourceType': 'cluster'|'cluster-parameter-group'|'cluster-security-group'|'cluster-snapshot',
'Message': 'string',
'EventCategories': [
'string',
],
'Severity': 'string',
'Date': datetime(2015, 1, 1),
'EventId': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Events (list) --
A list of Event instances.
(dict) --
Describes an event.
SourceIdentifier (string) --
The identifier for the source of the event.
SourceType (string) --
The source type for this event.
Message (string) --
The text of this event.
EventCategories (list) --
A list of the event categories.
Values: Configuration, Management, Monitoring, Security
Severity (string) --
The severity of the event.
Values: ERROR, INFO
Date (datetime) --
The date and time of the event.
EventId (string) --
The identifier of the event.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_hsm_client_certificates')
Creates an iterator that will paginate through responses from Redshift.Client.describe_hsm_client_certificates().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
HsmClientCertificateIdentifier='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A tag key or keys for which you want to return all matching HSM client certificates that are associated with the specified key or keys. For example, suppose that you have HSM client certificates that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the HSM client certificates that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching HSM client certificates that are associated with the specified tag value or values. For example, suppose that you have HSM client certificates that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the HSM client certificates that have either or both of these tag values associated with them.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'HsmClientCertificates': [
{
'HsmClientCertificateIdentifier': 'string',
'HsmClientCertificatePublicKey': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
HsmClientCertificates (list) --
A list of the identifiers for one or more HSM client certificates used by Amazon Redshift clusters to store and retrieve database encryption keys in an HSM.
(dict) --
Returns information about an HSM client certificate. The certificate is stored in a secure Hardware Storage Module (HSM), and used by the Amazon Redshift cluster to encrypt data files.
HsmClientCertificateIdentifier (string) --
The identifier of the HSM client certificate.
HsmClientCertificatePublicKey (string) --
The public key that the Amazon Redshift cluster will use to connect to the HSM. You must register the public key in the HSM.
Tags (list) --
The list of tags for the HSM client certificate.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_hsm_configurations')
Creates an iterator that will paginate through responses from Redshift.Client.describe_hsm_configurations().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
HsmConfigurationIdentifier='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A tag key or keys for which you want to return all matching HSM configurations that are associated with the specified key or keys. For example, suppose that you have HSM configurations that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the HSM configurations that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching HSM configurations that are associated with the specified tag value or values. For example, suppose that you have HSM configurations that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the HSM configurations that have either or both of these tag values associated with them.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'HsmConfigurations': [
{
'HsmConfigurationIdentifier': 'string',
'Description': 'string',
'HsmIpAddress': 'string',
'HsmPartitionName': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
HsmConfigurations (list) --
A list of HsmConfiguration objects.
(dict) --
Returns information about an HSM configuration, which is an object that describes to Amazon Redshift clusters the information they require to connect to an HSM where they can store database encryption keys.
HsmConfigurationIdentifier (string) --
The name of the Amazon Redshift HSM configuration.
Description (string) --
A text description of the HSM configuration.
HsmIpAddress (string) --
The IP address that the Amazon Redshift cluster must use to access the HSM.
HsmPartitionName (string) --
The name of the partition in the HSM where the Amazon Redshift clusters will store their database encryption keys.
Tags (list) --
The list of tags for the HSM configuration.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_orderable_cluster_options')
Creates an iterator that will paginate through responses from Redshift.Client.describe_orderable_cluster_options().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ClusterVersion='string',
NodeType='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The version filter value. Specify this parameter to show only the available offerings matching the specified version.
Default: All versions.
Constraints: Must be one of the version returned from DescribeClusterVersions .
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'OrderableClusterOptions': [
{
'ClusterVersion': 'string',
'ClusterType': 'string',
'NodeType': 'string',
'AvailabilityZones': [
{
'Name': 'string',
'SupportedPlatforms': [
{
'Name': 'string'
},
]
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Contains the output from the DescribeOrderableClusterOptions action.
OrderableClusterOptions (list) --
An OrderableClusterOption structure containing information about orderable options for the cluster.
(dict) --
Describes an orderable cluster option.
ClusterVersion (string) --
The version of the orderable cluster.
ClusterType (string) --
The cluster type, for example multi-node .
NodeType (string) --
The node type for the orderable cluster.
AvailabilityZones (list) --
A list of availability zones for the orderable cluster.
(dict) --
Describes an availability zone.
Name (string) --
The name of the availability zone.
SupportedPlatforms (list) --
(dict) --
A list of supported platforms for orderable clusters.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_reserved_node_offerings')
Creates an iterator that will paginate through responses from Redshift.Client.describe_reserved_node_offerings().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ReservedNodeOfferingId='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ReservedNodeOfferings': [
{
'ReservedNodeOfferingId': 'string',
'NodeType': 'string',
'Duration': 123,
'FixedPrice': 123.0,
'UsagePrice': 123.0,
'CurrencyCode': 'string',
'OfferingType': 'string',
'RecurringCharges': [
{
'RecurringChargeAmount': 123.0,
'RecurringChargeFrequency': 'string'
},
],
'ReservedNodeOfferingType': 'Regular'|'Upgradable'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
ReservedNodeOfferings (list) --
A list of ReservedNodeOffering objects.
(dict) --
Describes a reserved node offering.
ReservedNodeOfferingId (string) --
The offering identifier.
NodeType (string) --
The node type offered by the reserved node offering.
Duration (integer) --
The duration, in seconds, for which the offering will reserve the node.
FixedPrice (float) --
The upfront fixed charge you will pay to purchase the specific reserved node offering.
UsagePrice (float) --
The rate you are charged for each hour the cluster that is using the offering is running.
CurrencyCode (string) --
The currency code for the compute nodes offering.
OfferingType (string) --
The anticipated utilization of the reserved node, as defined in the reserved node offering.
RecurringCharges (list) --
The charge to your account regardless of whether you are creating any clusters using the node offering. Recurring charges are only in effect for heavy-utilization reserved nodes.
(dict) --
Describes a recurring charge.
RecurringChargeAmount (float) --
The amount charged per the period of time specified by the recurring charge frequency.
RecurringChargeFrequency (string) --
The frequency at which the recurring charge amount is applied.
ReservedNodeOfferingType (string) --
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_reserved_nodes')
Creates an iterator that will paginate through responses from Redshift.Client.describe_reserved_nodes().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ReservedNodeId='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ReservedNodes': [
{
'ReservedNodeId': 'string',
'ReservedNodeOfferingId': 'string',
'NodeType': 'string',
'StartTime': datetime(2015, 1, 1),
'Duration': 123,
'FixedPrice': 123.0,
'UsagePrice': 123.0,
'CurrencyCode': 'string',
'NodeCount': 123,
'State': 'string',
'OfferingType': 'string',
'RecurringCharges': [
{
'RecurringChargeAmount': 123.0,
'RecurringChargeFrequency': 'string'
},
],
'ReservedNodeOfferingType': 'Regular'|'Upgradable'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
ReservedNodes (list) --
The list of ReservedNode objects.
(dict) --
Describes a reserved node. You can call the DescribeReservedNodeOfferings API to obtain the available reserved node offerings.
ReservedNodeId (string) --
The unique identifier for the reservation.
ReservedNodeOfferingId (string) --
The identifier for the reserved node offering.
NodeType (string) --
The node type of the reserved node.
StartTime (datetime) --
The time the reservation started. You purchase a reserved node offering for a duration. This is the start time of that duration.
Duration (integer) --
The duration of the node reservation in seconds.
FixedPrice (float) --
The fixed cost Amazon Redshift charges you for this reserved node.
UsagePrice (float) --
The hourly rate Amazon Redshift charges you for this reserved node.
CurrencyCode (string) --
The currency code for the reserved cluster.
NodeCount (integer) --
The number of reserved compute nodes.
State (string) --
The state of the reserved compute node.
Possible Values:
OfferingType (string) --
The anticipated utilization of the reserved node, as defined in the reserved node offering.
RecurringCharges (list) --
The recurring charges for the reserved node.
(dict) --
Describes a recurring charge.
RecurringChargeAmount (float) --
The amount charged per the period of time specified by the recurring charge frequency.
RecurringChargeFrequency (string) --
The frequency at which the recurring charge amount is applied.
ReservedNodeOfferingType (string) --
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_snapshot_copy_grants')
Creates an iterator that will paginate through responses from Redshift.Client.describe_snapshot_copy_grants().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
SnapshotCopyGrantName='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A tag key or keys for which you want to return all matching resources that are associated with the specified key or keys. For example, suppose that you have resources tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with all resources that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching resources that are associated with the specified value or values. For example, suppose that you have resources tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with all resources that have either or both of these tag values associated with them.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'SnapshotCopyGrants': [
{
'SnapshotCopyGrantName': 'string',
'KmsKeyId': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
SnapshotCopyGrants (list) --
The list of SnapshotCopyGrant objects.
(dict) --
The snapshot copy grant that grants Amazon Redshift permission to encrypt copied snapshots with the specified customer master key (CMK) from AWS KMS in the destination region.
For more information about managing snapshot copy grants, go to Amazon Redshift Database Encryption in the Amazon Redshift Cluster Management Guide .
SnapshotCopyGrantName (string) --
The name of the snapshot copy grant.
KmsKeyId (string) --
The unique identifier of the customer master key (CMK) in AWS KMS to which Amazon Redshift is granted permission.
Tags (list) --
A list of tag instances.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_snapshot_schedules')
Creates an iterator that will paginate through responses from Redshift.Client.describe_snapshot_schedules().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ClusterIdentifier='string',
ScheduleIdentifier='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The key value for a snapshot schedule tag.
The value corresponding to the key of the snapshot schedule tag.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'SnapshotSchedules': [
{
'ScheduleDefinitions': [
'string',
],
'ScheduleIdentifier': 'string',
'ScheduleDescription': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'NextInvocations': [
datetime(2015, 1, 1),
],
'AssociatedClusterCount': 123,
'AssociatedClusters': [
{
'ClusterIdentifier': 'string',
'ScheduleAssociationState': 'MODIFYING'|'ACTIVE'|'FAILED'
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
SnapshotSchedules (list) --
A list of SnapshotSchedules.
(dict) --
Describes a snapshot schedule. You can set a regular interval for creating snapshots of a cluster. You can also schedule snapshots for specific dates.
ScheduleDefinitions (list) --
A list of ScheduleDefinitions.
ScheduleIdentifier (string) --
A unique identifier for the schedule.
ScheduleDescription (string) --
The description of the schedule.
Tags (list) --
An optional set of tags describing the schedule.
(dict) --
A tag consisting of a name/value pair for a resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
NextInvocations (list) --
AssociatedClusterCount (integer) --
The number of clusters associated with the schedule.
AssociatedClusters (list) --
A list of clusters associated with the schedule. A maximum of 100 clusters is returned.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_table_restore_status')
Creates an iterator that will paginate through responses from Redshift.Client.describe_table_restore_status().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ClusterIdentifier='string',
TableRestoreRequestId='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'TableRestoreStatusDetails': [
{
'TableRestoreRequestId': 'string',
'Status': 'PENDING'|'IN_PROGRESS'|'SUCCEEDED'|'FAILED'|'CANCELED',
'Message': 'string',
'RequestTime': datetime(2015, 1, 1),
'ProgressInMegaBytes': 123,
'TotalDataInMegaBytes': 123,
'ClusterIdentifier': 'string',
'SnapshotIdentifier': 'string',
'SourceDatabaseName': 'string',
'SourceSchemaName': 'string',
'SourceTableName': 'string',
'TargetDatabaseName': 'string',
'TargetSchemaName': 'string',
'NewTableName': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
TableRestoreStatusDetails (list) --
A list of status details for one or more table restore requests.
(dict) --
Describes the status of a RestoreTableFromClusterSnapshot operation.
TableRestoreRequestId (string) --
The unique identifier for the table restore request.
Status (string) --
A value that describes the current state of the table restore request.
Valid Values: SUCCEEDED , FAILED , CANCELED , PENDING , IN_PROGRESS
Message (string) --
A description of the status of the table restore request. Status values include SUCCEEDED , FAILED , CANCELED , PENDING , IN_PROGRESS .
RequestTime (datetime) --
The time that the table restore request was made, in Universal Coordinated Time (UTC).
ProgressInMegaBytes (integer) --
The amount of data restored to the new table so far, in megabytes (MB).
TotalDataInMegaBytes (integer) --
The total amount of data to restore to the new table, in megabytes (MB).
ClusterIdentifier (string) --
The identifier of the Amazon Redshift cluster that the table is being restored to.
SnapshotIdentifier (string) --
The identifier of the snapshot that the table is being restored from.
SourceDatabaseName (string) --
The name of the source database that contains the table being restored.
SourceSchemaName (string) --
The name of the source schema that contains the table being restored.
SourceTableName (string) --
The name of the source table being restored.
TargetDatabaseName (string) --
The name of the database to restore the table to.
TargetSchemaName (string) --
The name of the schema to restore the table to.
NewTableName (string) --
The name of the table to create as a result of the table restore request.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('describe_tags')
Creates an iterator that will paginate through responses from Redshift.Client.describe_tags().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ResourceName='string',
ResourceType='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
The type of resource with which you want to view tags. Valid resource types are:
For more information about Amazon Redshift resource types and constructing ARNs, go to Specifying Policy Elements: Actions, Effects, Resources, and Principals in the Amazon Redshift Cluster Management Guide.
A tag key or keys for which you want to return all matching resources that are associated with the specified key or keys. For example, suppose that you have resources tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with all resources that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching resources that are associated with the specified value or values. For example, suppose that you have resources tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with all resources that have either or both of these tag values associated with them.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'TaggedResources': [
{
'Tag': {
'Key': 'string',
'Value': 'string'
},
'ResourceName': 'string',
'ResourceType': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
TaggedResources (list) --
A list of tags with their associated resources.
(dict) --
A tag and its associated resource.
Tag (dict) --
The tag for the resource.
Key (string) --
The key, or name, for the resource tag.
Value (string) --
The value for the resource tag.
ResourceName (string) --
The Amazon Resource Name (ARN) with which the tag is associated, for example: arn:aws:redshift:us-east-1:123456789:cluster:t1 .
ResourceType (string) --
The type of resource with which the tag is associated. Valid resource types are:
For more information about Amazon Redshift resource types and constructing ARNs, go to Constructing an Amazon Redshift Amazon Resource Name (ARN) in the Amazon Redshift Cluster Management Guide.
NextToken (string) --
A token to resume pagination.
paginator = client.get_paginator('get_reserved_node_exchange_offerings')
Creates an iterator that will paginate through responses from Redshift.Client.get_reserved_node_exchange_offerings().
See also: AWS API Documentation
Request Syntax
response_iterator = paginator.paginate(
ReservedNodeId='string',
PaginationConfig={
'MaxItems': 123,
'PageSize': 123,
'StartingToken': 'string'
}
)
[REQUIRED]
A string representing the node identifier for the DC1 Reserved Node to be exchanged.
A dictionary that provides parameters to control pagination.
The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.
The size of each page.
A token to specify where to start paginating. This is the NextToken from a previous response.
dict
Response Syntax
{
'ReservedNodeOfferings': [
{
'ReservedNodeOfferingId': 'string',
'NodeType': 'string',
'Duration': 123,
'FixedPrice': 123.0,
'UsagePrice': 123.0,
'CurrencyCode': 'string',
'OfferingType': 'string',
'RecurringCharges': [
{
'RecurringChargeAmount': 123.0,
'RecurringChargeFrequency': 'string'
},
],
'ReservedNodeOfferingType': 'Regular'|'Upgradable'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
ReservedNodeOfferings (list) --
Returns an array of ReservedNodeOffering objects.
(dict) --
Describes a reserved node offering.
ReservedNodeOfferingId (string) --
The offering identifier.
NodeType (string) --
The node type offered by the reserved node offering.
Duration (integer) --
The duration, in seconds, for which the offering will reserve the node.
FixedPrice (float) --
The upfront fixed charge you will pay to purchase the specific reserved node offering.
UsagePrice (float) --
The rate you are charged for each hour the cluster that is using the offering is running.
CurrencyCode (string) --
The currency code for the compute nodes offering.
OfferingType (string) --
The anticipated utilization of the reserved node, as defined in the reserved node offering.
RecurringCharges (list) --
The charge to your account regardless of whether you are creating any clusters using the node offering. Recurring charges are only in effect for heavy-utilization reserved nodes.
(dict) --
Describes a recurring charge.
RecurringChargeAmount (float) --
The amount charged per the period of time specified by the recurring charge frequency.
RecurringChargeFrequency (string) --
The frequency at which the recurring charge amount is applied.
ReservedNodeOfferingType (string) --
NextToken (string) --
A token to resume pagination.
The available waiters are:
waiter = client.get_waiter('cluster_available')
Polls Redshift.Client.describe_clusters() every 60 seconds until a successful state is reached. An error is returned after 30 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
ClusterIdentifier='string',
MaxRecords=123,
Marker='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
The unique identifier of a cluster whose properties you are requesting. This parameter is case sensitive.
The default is that all clusters defined for an account are returned.
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
An optional parameter that specifies the starting point to return a set of response records. When the results of a DescribeClusters request exceed the value specified in MaxRecords , AWS returns a value in the Marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the Marker parameter and retrying the request.
Constraints: You can specify either the ClusterIdentifier parameter or the Marker parameter, but not both.
A tag key or keys for which you want to return all matching clusters that are associated with the specified key or keys. For example, suppose that you have clusters that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the clusters that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching clusters that are associated with the specified tag value or values. For example, suppose that you have clusters that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the clusters that have either or both of these tag values associated with them.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 60
The maximum number of attempts to be made. Default: 30
None
waiter = client.get_waiter('cluster_deleted')
Polls Redshift.Client.describe_clusters() every 60 seconds until a successful state is reached. An error is returned after 30 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
ClusterIdentifier='string',
MaxRecords=123,
Marker='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
The unique identifier of a cluster whose properties you are requesting. This parameter is case sensitive.
The default is that all clusters defined for an account are returned.
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
An optional parameter that specifies the starting point to return a set of response records. When the results of a DescribeClusters request exceed the value specified in MaxRecords , AWS returns a value in the Marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the Marker parameter and retrying the request.
Constraints: You can specify either the ClusterIdentifier parameter or the Marker parameter, but not both.
A tag key or keys for which you want to return all matching clusters that are associated with the specified key or keys. For example, suppose that you have clusters that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the clusters that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching clusters that are associated with the specified tag value or values. For example, suppose that you have clusters that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the clusters that have either or both of these tag values associated with them.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 60
The maximum number of attempts to be made. Default: 30
None
waiter = client.get_waiter('cluster_restored')
Polls Redshift.Client.describe_clusters() every 60 seconds until a successful state is reached. An error is returned after 30 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
ClusterIdentifier='string',
MaxRecords=123,
Marker='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
The unique identifier of a cluster whose properties you are requesting. This parameter is case sensitive.
The default is that all clusters defined for an account are returned.
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
An optional parameter that specifies the starting point to return a set of response records. When the results of a DescribeClusters request exceed the value specified in MaxRecords , AWS returns a value in the Marker field of the response. You can retrieve the next set of response records by providing the returned marker value in the Marker parameter and retrying the request.
Constraints: You can specify either the ClusterIdentifier parameter or the Marker parameter, but not both.
A tag key or keys for which you want to return all matching clusters that are associated with the specified key or keys. For example, suppose that you have clusters that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the clusters that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching clusters that are associated with the specified tag value or values. For example, suppose that you have clusters that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the clusters that have either or both of these tag values associated with them.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 60
The maximum number of attempts to be made. Default: 30
None
waiter = client.get_waiter('snapshot_available')
Polls Redshift.Client.describe_cluster_snapshots() every 15 seconds until a successful state is reached. An error is returned after 20 failed checks.
See also: AWS API Documentation
Request Syntax
waiter.wait(
ClusterIdentifier='string',
SnapshotIdentifier='string',
SnapshotType='string',
StartTime=datetime(2015, 1, 1),
EndTime=datetime(2015, 1, 1),
MaxRecords=123,
Marker='string',
OwnerAccount='string',
TagKeys=[
'string',
],
TagValues=[
'string',
],
ClusterExists=True|False,
SortingEntities=[
{
'Attribute': 'SOURCE_TYPE'|'TOTAL_SIZE'|'CREATE_TIME',
'SortOrder': 'ASC'|'DESC'
},
],
WaiterConfig={
'Delay': 123,
'MaxAttempts': 123
}
)
The type of snapshots for which you are requesting information. By default, snapshots of all types are returned.
Valid Values: automated | manual
A value that requests only snapshots created at or after the specified time. The time value is specified in ISO 8601 format. For more information about ISO 8601, go to the ISO8601 Wikipedia page.
Example: 2012-07-16T18:00:00Z
A time value that requests only snapshots created at or before the specified time. The time value is specified in ISO 8601 format. For more information about ISO 8601, go to the ISO8601 Wikipedia page.
Example: 2012-07-16T18:00:00Z
The maximum number of response records to return in each call. If the number of remaining response records exceeds the specified MaxRecords value, a value is returned in a marker field of the response. You can retrieve the next set of records by retrying the command with the returned marker value.
Default: 100
Constraints: minimum 20, maximum 100.
A tag key or keys for which you want to return all matching cluster snapshots that are associated with the specified key or keys. For example, suppose that you have snapshots that are tagged with keys called owner and environment . If you specify both of these tag keys in the request, Amazon Redshift returns a response with the snapshots that have either or both of these tag keys associated with them.
A tag value or values for which you want to return all matching cluster snapshots that are associated with the specified tag value or values. For example, suppose that you have snapshots that are tagged with values called admin and test . If you specify both of these tag values in the request, Amazon Redshift returns a response with the snapshots that have either or both of these tag values associated with them.
A value that indicates whether to return snapshots only for an existing cluster. You can perform table-level restore only by using a snapshot of an existing cluster, that is, a cluster that has not been deleted. Values for this parameter work as follows:
Describes a sorting entity
The category for sorting the snapshots.
The order for listing the attributes.
A dictionary that provides parameters to control waiting behavior.
The amount of time in seconds to wait between attempts. Default: 15
The maximum number of attempts to be made. Default: 20
None