QuickSight / Client / generate_embed_url_for_registered_user

generate_embed_url_for_registered_user#

QuickSight.Client.generate_embed_url_for_registered_user(**kwargs)#

Generates an embed URL that you can use to embed an Amazon QuickSight experience in your website. This action can be used for any type of user registered in an Amazon QuickSight account. Before you use this action, make sure that you have configured the relevant Amazon QuickSight resource and permissions.

The following rules apply to the generated URL:

It contains a temporary bearer token. It is valid for 5 minutes after it is generated. Once redeemed within this period, it cannot be re-used again.
The URL validity period should not be confused with the actual session lifetime that can be customized using the SessionLifetimeInMinutes parameter. The resulting user session is valid for 15 minutes (minimum) to 10 hours (maximum). The default session duration is 10 hours.
You are charged only when the URL is used or there is interaction with Amazon QuickSight.

For more information, see Embedded Analytics in the Amazon QuickSight User Guide.

For more information about the high-level steps for embedding and for an interactive demo of the ways you can customize embedding, visit the Amazon QuickSight Developer Portal.

Request Syntax

response = client.generate_embed_url_for_registered_user(
    AwsAccountId='string',
    SessionLifetimeInMinutes=123,
    UserArn='string',
    ExperienceConfiguration={
        'Dashboard': {
            'InitialDashboardId': 'string',
            'FeatureConfigurations': {
                'StatePersistence': {
                    'Enabled': True|False
                },
                'Bookmarks': {
                    'Enabled': True|False
                }
            }
        },
        'QuickSightConsole': {
            'InitialPath': 'string',
            'FeatureConfigurations': {
                'StatePersistence': {
                    'Enabled': True|False
                }
            }
        },
        'QSearchBar': {
            'InitialTopicId': 'string'
        },
        'DashboardVisual': {
            'InitialDashboardVisualId': {
                'DashboardId': 'string',
                'SheetId': 'string',
                'VisualId': 'string'
            }
        }
    },
    AllowedDomains=[
        'string',
    ]
)

Parameters:

AwsAccountId (string) –
[REQUIRED]

The ID for the Amazon Web Services account that contains the dashboard that you’re embedding.
SessionLifetimeInMinutes (integer) – How many minutes the session is valid. The session lifetime must be in [15-600] minutes range.
UserArn (string) –
[REQUIRED]

The Amazon Resource Name for the registered user.
ExperienceConfiguration (dict) –
[REQUIRED]

The experience you are embedding. For registered users, you can embed Amazon QuickSight dashboards, Amazon QuickSight visuals, the Amazon QuickSight Q search bar, or the entire Amazon QuickSight console.
- Dashboard (dict) –
  
  The configuration details for providing a dashboard embedding experience.
  - InitialDashboardId (string) – [REQUIRED]
    
    The dashboard ID for the dashboard that you want the user to see first. This ID is included in the output URL. When the URL in response is accessed, Amazon QuickSight renders this dashboard if the user has permissions to view it.
    
    If the user does not have permission to view this dashboard, they see a permissions error message.
  - FeatureConfigurations (dict) –
    
    The feature configurations of an embbedded Amazon QuickSight dashboard.
    - StatePersistence (dict) –
      
      The state persistence settings of an embedded dashboard.
      - Enabled (boolean) – [REQUIRED]
        
        Determines if a Amazon QuickSight dashboard’s state persistence settings are turned on or off.
    - Bookmarks (dict) –
      
      The bookmarks configuration for an embedded dashboard in Amazon QuickSight.
      - Enabled (boolean) – [REQUIRED]
        
        A Boolean value that determines whether a user can bookmark an embedded dashboard.
- QuickSightConsole (dict) –
  
  The configuration details for providing each Amazon QuickSight console embedding experience. This can be used along with custom permissions to restrict access to certain features. For more information, see Customizing Access to the Amazon QuickSight Console in the Amazon QuickSight User Guide.
  
  Use GenerateEmbedUrlForRegisteredUser where you want to provide an authoring portal that allows users to create data sources, datasets, analyses, and dashboards. The users who accesses an embedded Amazon QuickSight console needs to belong to the author or admin security cohort. If you want to restrict permissions to some of these features, add a custom permissions profile to the user with the UpdateUser API operation. Use the RegisterUser API operation to add a new user with a custom permission profile attached. For more information, see the following sections in the Amazon QuickSight User Guide:
  - Embedding the Full Functionality of the Amazon QuickSight Console for Authenticated Users
  - Customizing Access to the Amazon QuickSight Console
  For more information about the high-level steps for embedding and for an interactive demo of the ways you can customize embedding, visit the Amazon QuickSight Developer Portal.
  - InitialPath (string) –
    
    The initial URL path for the Amazon QuickSight console. InitialPath is required.
    
    The entry point URL is constrained to the following paths:
    - /start
    - /start/analyses
    - /start/dashboards
    - /start/favorites
    - /dashboards/DashboardId. DashboardId is the actual ID key from the Amazon QuickSight console URL of the dashboard.
    - /analyses/AnalysisId. AnalysisId is the actual ID key from the Amazon QuickSight console URL of the analysis.
  - FeatureConfigurations (dict) –
    
    The embedding configuration of an embedded Amazon QuickSight console.
    - StatePersistence (dict) –
      
      The state persistence configurations of an embedded Amazon QuickSight console.
      - Enabled (boolean) – [REQUIRED]
        
        Determines if a Amazon QuickSight dashboard’s state persistence settings are turned on or off.
- QSearchBar (dict) –
  
  The configuration details for embedding the Q search bar.
  
  For more information about embedding the Q search bar, see Embedding Overview in the Amazon QuickSight User Guide.
  - InitialTopicId (string) –
    
    The ID of the Q topic that you want to make the starting topic in the Q search bar. You can find a topic ID by navigating to the Topics pane in the Amazon QuickSight application and opening a topic. The ID is in the URL for the topic that you open.
    
    If you don’t specify an initial topic, a list of all shared topics is shown in the Q bar for your readers. When you select an initial topic, you can specify whether or not readers are allowed to select other topics from the available ones in the list.
- DashboardVisual (dict) –
  
  The type of embedding experience. In this case, Amazon QuickSight visuals.
  - InitialDashboardVisualId (dict) – [REQUIRED]
    
    The visual ID for the visual that you want the user to embed. This ID is included in the output URL. When the URL in response is accessed, Amazon QuickSight renders this visual.
    
    The Amazon Resource Name (ARN) of the dashboard that the visual belongs to must be included in the AuthorizedResourceArns parameter. Otherwise, the request will fail with InvalidParameterValueException.
    - DashboardId (string) – [REQUIRED]
      
      The ID of the dashboard that has the visual that you want to embed. The DashboardId can be found in the IDs for developers section of the Embed visual pane of the visual’s on-visual menu of the Amazon QuickSight console. You can also get the DashboardId with a ListDashboards API operation.
    - SheetId (string) – [REQUIRED]
      
      The ID of the sheet that the has visual that you want to embed. The SheetId can be found in the IDs for developers section of the Embed visual pane of the visual’s on-visual menu of the Amazon QuickSight console.
    - VisualId (string) – [REQUIRED]
      
      The ID of the visual that you want to embed. The VisualID can be found in the IDs for developers section of the Embed visual pane of the visual’s on-visual menu of the Amazon QuickSight console.
AllowedDomains (list) –
The domains that you want to add to the allow list for access to the generated URL that is then embedded. This optional parameter overrides the static domains that are configured in the Manage QuickSight menu in the Amazon QuickSight console. Instead, it allows only the domains that you include in this parameter. You can list up to three domains or subdomains in each API call.

To include all subdomains under a specific domain to the allow list, use *. For example, https://*.sapp.amazon.com includes all subdomains under https://sapp.amazon.com.
- (string) –

Return type:

dict

Returns:

Response Syntax

{
    'EmbedUrl': 'string',
    'Status': 123,
    'RequestId': 'string'
}

Response Structure

(dict) –
- EmbedUrl (string) –
  
  The embed URL for the Amazon QuickSight dashboard, visual, Q search bar, or console.
- Status (integer) –
  
  The HTTP status of the request.
- RequestId (string) –
  
  The Amazon Web Services request ID for this operation.

Exceptions

QuickSight.Client.exceptions.AccessDeniedException
QuickSight.Client.exceptions.InvalidParameterValueException
QuickSight.Client.exceptions.QuickSightUserNotFoundException
QuickSight.Client.exceptions.ResourceNotFoundException
QuickSight.Client.exceptions.SessionLifetimeInMinutesInvalidException
QuickSight.Client.exceptions.ThrottlingException
QuickSight.Client.exceptions.UnsupportedUserEditionException
QuickSight.Client.exceptions.UnsupportedPricingPlanException
QuickSight.Client.exceptions.InternalFailureException