ObjectSummary / Action / copy_from

copy_from#

S3.ObjectSummary.copy_from(**kwargs)#

Creates a copy of an object that is already stored in Amazon S3.

Note

You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.

You can copy individual objects between general purpose buckets, between directory buckets, and between general purpose buckets and directory buckets.

Note

Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format ``https://bucket_name.s3express-az_id.region.amazonaws.com/key-name ``. Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.

Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. For more information about how to enable a Region for your account, see Enable or disable a Region for standalone accounts in the Amazon Web Services Account Management Guide.

Warning

Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.

Authentication and authorization

All CopyObject requests must be authenticated and signed by using IAM credentials (access key ID and secret access key for the IAM identities). All headers with the x-amz- prefix, including x-amz-copy-source, must be signed. For more information, see REST Authentication.

Directory buckets - You must use the IAM credentials to authenticate and authorize your access to the CopyObject API operation, instead of using the temporary security credentials through the CreateSession API operation.

Amazon Web Services CLI or SDKs handles authentication and authorization on your behalf.

Permissions

You must have read access to the source object and write access to the destination bucket.

  • General purpose bucket permissions - You must have permissions in an IAM policy based on the source and destination bucket types in a CopyObject operation.

    • If the source object is in a general purpose bucket, you must have s3:GetObject permission to read the source object that is being copied.

    • If the destination bucket is a general purpose bucket, you must have s3:PutObject permission to write the object copy to the destination bucket.

  • Directory bucket permissions - You must have permissions in a bucket policy or an IAM identity-based policy based on the source and destination bucket types in a CopyObject operation.

    • If the source object that you want to copy is in a directory bucket, you must have the s3express:CreateSession permission in the Action element of a policy to read the object. By default, the session is in the ReadWrite mode. If you want to restrict the access, you can explicitly set the s3express:SessionMode condition key to ReadOnly on the copy source bucket.

    • If the copy destination is a directory bucket, you must have the s3express:CreateSession permission in the Action element of a policy to write the object to the destination. The s3express:SessionMode condition key can’t be set to ReadOnly on the copy destination bucket.

For example policies, see Example bucket policies for S3 Express One Zone and Amazon Web Services Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.

Response and special errors

When the request is an HTTP 1.1 request, the response is chunk encoded. When the request is not an HTTP 1.1 request, the response would not contain the Content-Length. You always need to read the entire response body to check if the copy succeeds. to keep the connection alive while we copy the data.

  • If the copy is successful, you receive a response with information about the copied object.

  • A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. A 200 OK response can contain either a success or an error.

    • If the error occurs before the copy action starts, you receive a standard Amazon S3 error.

    • If the error occurs during the copy operation, the error response is embedded in the 200 OK response. For example, in a cross-region copy, you may encounter throttling and receive a 200 OK response. For more information, see Resolve the Error 200 response when copying objects to Amazon S3. The 200 OK status code means the copy was accepted, but it doesn’t mean the copy is complete. Another example is when you disconnect from Amazon S3 before the copy is complete, Amazon S3 might cancel the copy and you may receive a 200 OK response. You must stay connected to Amazon S3 until the entire response is successfully received and processed. If you call this API operation directly, make sure to design your application to parse the content of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throw an exception (or, for the SDKs that don’t use exceptions, they return an error).

    Charge

The copy request charge is based on the storage class and Region that you specify for the destination object. The request can also result in a data retrieval charge for the source if the source storage class bills for data retrieval. If the copy source is in a different region, the data transfer is billed to the copy source account. For pricing information, see Amazon S3 pricing.

HTTP Host header syntax

Directory buckets - The HTTP Host header syntax is Bucket_name.s3express-az_id.region.amazonaws.com.

The following operations are related to CopyObject:

See also: AWS API Documentation

Request Syntax

response = object_summary.copy_from(
    ACL='private'|'public-read'|'public-read-write'|'authenticated-read'|'aws-exec-read'|'bucket-owner-read'|'bucket-owner-full-control',
    CacheControl='string',
    ChecksumAlgorithm='CRC32'|'CRC32C'|'SHA1'|'SHA256',
    ContentDisposition='string',
    ContentEncoding='string',
    ContentLanguage='string',
    ContentType='string',
    CopySource='string' or {'Bucket': 'string', 'Key': 'string', 'VersionId': 'string'},
    CopySourceIfMatch='string',
    CopySourceIfModifiedSince=datetime(2015, 1, 1),
    CopySourceIfNoneMatch='string',
    CopySourceIfUnmodifiedSince=datetime(2015, 1, 1),
    Expires=datetime(2015, 1, 1),
    GrantFullControl='string',
    GrantRead='string',
    GrantReadACP='string',
    GrantWriteACP='string',
    Metadata={
        'string': 'string'
    },
    MetadataDirective='COPY'|'REPLACE',
    TaggingDirective='COPY'|'REPLACE',
    ServerSideEncryption='AES256'|'aws:kms'|'aws:kms:dsse',
    StorageClass='STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR'|'SNOW'|'EXPRESS_ONEZONE',
    WebsiteRedirectLocation='string',
    SSECustomerAlgorithm='string',
    SSECustomerKey='string',
    SSEKMSKeyId='string',
    SSEKMSEncryptionContext='string',
    BucketKeyEnabled=True|False,
    CopySourceSSECustomerAlgorithm='string',
    CopySourceSSECustomerKey='string',
    RequestPayer='requester',
    Tagging='string',
    ObjectLockMode='GOVERNANCE'|'COMPLIANCE',
    ObjectLockRetainUntilDate=datetime(2015, 1, 1),
    ObjectLockLegalHoldStatus='ON'|'OFF',
    ExpectedBucketOwner='string',
    ExpectedSourceBucketOwner='string'
)
Parameters:
  • ACL (string) –

    The canned access control list (ACL) to apply to the object.

    When you copy an object, the ACL metadata is not preserved and is set to private by default. Only the owner has full access control. To override the default ACL setting, specify a new ACL when you generate a copy request. For more information, see Using ACLs.

    If the destination bucket that you’re copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don’t specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.

    Note

    • If your destination bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.

    • This functionality is not supported for directory buckets.

    • This functionality is not supported for Amazon S3 on Outposts.

  • CacheControl (string) – Specifies the caching behavior along the request/reply chain.

  • ChecksumAlgorithm (string) –

    Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

    When you copy an object, if the source object has a checksum, that checksum value will be copied to the new object by default. If the CopyObject request does not include this x-amz-checksum-algorithm header, the checksum algorithm will be copied from the source object to the destination object (if it’s present on the source object). You can optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header. Unrecognized or unsupported values will respond with the HTTP status code 400 Bad Request.

    Note

    For directory buckets, when you use Amazon Web Services SDKs, CRC32 is the default checksum algorithm that’s used for performance.

  • ContentDisposition (string) – Specifies presentational information for the object. Indicates whether an object should be displayed in a web browser or downloaded as a file. It allows specifying the desired filename for the downloaded file.

  • ContentEncoding (string) –

    Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.

    Note

    For directory buckets, only the aws-chunked value is supported in this header field.

  • ContentLanguage (string) – The language the content is in.

  • ContentType (string) – A standard MIME type that describes the format of the object data.

  • CopySource (str or dict) – [REQUIRED] The name of the source bucket, key name of the source object, and optional version ID of the source object. You can either provide this value as a string or a dictionary. The string form is {bucket}/{key} or {bucket}/{key}?versionId={versionId} if you want to copy a specific version. You can also provide this value as a dictionary. The dictionary format is recommended over the string format because it is more explicit. The dictionary format is: {‘Bucket’: ‘bucket’, ‘Key’: ‘key’, ‘VersionId’: ‘id’}. Note that the VersionId key is optional and may be omitted. To specify an S3 access point, provide the access point ARN for the Bucket key in the copy source dictionary. If you want to provide the copy source for an S3 access point as a string instead of a dictionary, the ARN provided must be the full S3 access point object ARN (i.e. {accesspoint_arn}/object/{key})

  • CopySourceIfMatch (string) –

    Copies the object if its entity tag (ETag) matches the specified tag.

    If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:

    • x-amz-copy-source-if-match condition evaluates to true

    • x-amz-copy-source-if-unmodified-since condition evaluates to false

  • CopySourceIfModifiedSince (datetime) –

    Copies the object if it has been modified since the specified time.

    If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:

    • x-amz-copy-source-if-none-match condition evaluates to false

    • x-amz-copy-source-if-modified-since condition evaluates to true

  • CopySourceIfNoneMatch (string) –

    Copies the object if its entity tag (ETag) is different than the specified ETag.

    If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:

    • x-amz-copy-source-if-none-match condition evaluates to false

    • x-amz-copy-source-if-modified-since condition evaluates to true

  • CopySourceIfUnmodifiedSince (datetime) –

    Copies the object if it hasn’t been modified since the specified time.

    If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:

    • x-amz-copy-source-if-match condition evaluates to true

    • x-amz-copy-source-if-unmodified-since condition evaluates to false

  • Expires (datetime) – The date and time at which the object is no longer cacheable.

  • GrantFullControl (string) –

    Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.

    Note

    • This functionality is not supported for directory buckets.

    • This functionality is not supported for Amazon S3 on Outposts.

  • GrantRead (string) –

    Allows grantee to read the object data and its metadata.

    Note

    • This functionality is not supported for directory buckets.

    • This functionality is not supported for Amazon S3 on Outposts.

  • GrantReadACP (string) –

    Allows grantee to read the object ACL.

    Note

    • This functionality is not supported for directory buckets.

    • This functionality is not supported for Amazon S3 on Outposts.

  • GrantWriteACP (string) –

    Allows grantee to write the ACL for the applicable object.

    Note

    • This functionality is not supported for directory buckets.

    • This functionality is not supported for Amazon S3 on Outposts.

  • Metadata (dict) –

    A map of metadata to store with the object in S3.

    • (string) –

      • (string) –

  • MetadataDirective (string) –

    Specifies whether the metadata is copied from the source object or replaced with metadata that’s provided in the request. When copying an object, you can preserve all metadata (the default) or specify new metadata. If this header isn’t specified, COPY is the default behavior.

    General purpose bucket - For general purpose buckets, when you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Amazon S3 condition key examples in the Amazon S3 User Guide.

    Note

    x-amz-website-redirect-location is unique to each object and is not copied when using the x-amz-metadata-directive header. To copy the value, you must specify x-amz-website-redirect-location in the request header.

  • TaggingDirective (string) –

    Specifies whether the object tag-set is copied from the source object or replaced with the tag-set that’s provided in the request.

    The default value is COPY.

    Note

    Directory buckets - For directory buckets in a CopyObject operation, only the empty tag-set is supported. Any requests that attempt to write non-empty tags into directory buckets will receive a 501 Not Implemented status code. When the destination bucket is a directory bucket, you will receive a 501 Not Implemented response in any of the following situations:

    • When you attempt to COPY the tag-set from an S3 source object that has non-empty tags.

    • When you attempt to REPLACE the tag-set of a source object and set a non-empty value to x-amz-tagging.

    • When you don’t set the x-amz-tagging-directive header and the source object has non-empty tags. This is because the default value of x-amz-tagging-directive is COPY.

    Because only the empty tag-set is supported for directory buckets in a CopyObject operation, the following situations are allowed:

    • When you attempt to COPY the tag-set from a directory bucket source object that has no tags to a general purpose bucket. It copies an empty tag-set to the destination object.

    • When you attempt to REPLACE the tag-set of a directory bucket source object and set the x-amz-tagging value of the directory bucket destination object to empty.

    • When you attempt to REPLACE the tag-set of a general purpose bucket source object that has non-empty tags and set the x-amz-tagging value of the directory bucket destination object to empty.

    • When you attempt to REPLACE the tag-set of a directory bucket source object and don’t set the x-amz-tagging value of the directory bucket destination object. This is because the default value of x-amz-tagging is the empty value.

  • ServerSideEncryption (string) –

    The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse). Unrecognized or unsupported values won’t write a destination object and will receive a 400 Bad Request response.

    Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don’t specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), or server-side encryption with customer-provided encryption keys (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy.

    When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can specify appropriate encryption-related headers to encrypt the target object with an Amazon S3 managed key, a KMS key, or a customer-provided key. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence.

    With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption in the Amazon S3 User Guide.

    Note

    For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) ( AES256) is supported.

  • StorageClass (string) –

    If the x-amz-storage-class header is not used, the copied object will be stored in the STANDARD Storage Class by default. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class.

    Note

    • Directory buckets - For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects. Unsupported storage class values won’t write a destination object and will respond with the HTTP status code 400 Bad Request.

    • Amazon S3 on Outposts - S3 on Outposts only uses the OUTPOSTS Storage Class.

    You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 by using the x-amz-storage-class header. For more information, see Storage Classes in the Amazon S3 User Guide.

    Before using an object as a source object for the copy operation, you must restore a copy of it if it meets any of the following conditions:

    • The storage class of the source object is GLACIER or DEEP_ARCHIVE.

    • The storage class of the source object is INTELLIGENT_TIERING and it’s S3 Intelligent-Tiering access tier is Archive Access or Deep Archive Access.

    For more information, see RestoreObject and Copying Objects in the Amazon S3 User Guide.

  • WebsiteRedirectLocation (string) –

    If the destination bucket is configured as a website, redirects requests for this object copy to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata. This value is unique to each object and is not copied when using the x-amz-metadata-directive header. Instead, you may opt to provide this header in combination with the x-amz-metadata-directive header.

    Note

    This functionality is not supported for directory buckets.

  • SSECustomerAlgorithm (string) –

    Specifies the algorithm to use when encrypting the object (for example, AES256).

    When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can specify appropriate encryption-related headers to encrypt the target object with an Amazon S3 managed key, a KMS key, or a customer-provided key. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence.

    Note

    This functionality is not supported when the destination bucket is a directory bucket.

  • SSECustomerKey (string) –

    Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded. Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.

    Note

    This functionality is not supported when the destination bucket is a directory bucket.

  • SSECustomerKeyMD5 (string) –

    Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

    Note

    This functionality is not supported when the destination bucket is a directory bucket.

    Please note that this parameter is automatically populated if it is not provided. Including this parameter is not required

  • SSEKMSKeyId (string) –

    Specifies the KMS ID (Key ID, Key ARN, or Key Alias) to use for object encryption. All GET and PUT requests for an object protected by KMS will fail if they’re not made via SSL or using SigV4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.

    Note

    This functionality is not supported when the destination bucket is a directory bucket.

  • SSEKMSEncryptionContext (string) –

    Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs. This value must be explicitly added to specify encryption context for CopyObject requests.

    Note

    This functionality is not supported when the destination bucket is a directory bucket.

  • BucketKeyEnabled (boolean) –

    Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object.

    Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Specifying this header with a COPY action doesn’t affect bucket-level settings for S3 Bucket Key.

    For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.

    Note

    This functionality is not supported when the destination bucket is a directory bucket.

  • CopySourceSSECustomerAlgorithm (string) –

    Specifies the algorithm to use when decrypting the source object (for example, AES256).

    If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying.

    Note

    This functionality is not supported when the source object is in a directory bucket.

  • CopySourceSSECustomerKey (string) –

    Specifies the customer-provided encryption key for Amazon S3 to use to decrypt the source object. The encryption key provided in this header must be the same one that was used when the source object was created.

    If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying.

    Note

    This functionality is not supported when the source object is in a directory bucket.

  • CopySourceSSECustomerKeyMD5 (string) –

    Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

    If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying.

    Note

    This functionality is not supported when the source object is in a directory bucket.

    Please note that this parameter is automatically populated if it is not provided. Including this parameter is not required

  • RequestPayer (string) –

    Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

    Note

    This functionality is not supported for directory buckets.

  • Tagging (string) –

    The tag-set for the object copy in the destination bucket. This value must be used in conjunction with the x-amz-tagging-directive if you choose REPLACE for the x-amz-tagging-directive. If you choose COPY for the x-amz-tagging-directive, you don’t need to set the x-amz-tagging header, because the tag-set will be copied from the source object directly. The tag-set must be encoded as URL Query parameters.

    The default value is the empty value.

    Note

    Directory buckets - For directory buckets in a CopyObject operation, only the empty tag-set is supported. Any requests that attempt to write non-empty tags into directory buckets will receive a 501 Not Implemented status code. When the destination bucket is a directory bucket, you will receive a 501 Not Implemented response in any of the following situations:

    • When you attempt to COPY the tag-set from an S3 source object that has non-empty tags.

    • When you attempt to REPLACE the tag-set of a source object and set a non-empty value to x-amz-tagging.

    • When you don’t set the x-amz-tagging-directive header and the source object has non-empty tags. This is because the default value of x-amz-tagging-directive is COPY.

    Because only the empty tag-set is supported for directory buckets in a CopyObject operation, the following situations are allowed:

    • When you attempt to COPY the tag-set from a directory bucket source object that has no tags to a general purpose bucket. It copies an empty tag-set to the destination object.

    • When you attempt to REPLACE the tag-set of a directory bucket source object and set the x-amz-tagging value of the directory bucket destination object to empty.

    • When you attempt to REPLACE the tag-set of a general purpose bucket source object that has non-empty tags and set the x-amz-tagging value of the directory bucket destination object to empty.

    • When you attempt to REPLACE the tag-set of a directory bucket source object and don’t set the x-amz-tagging value of the directory bucket destination object. This is because the default value of x-amz-tagging is the empty value.

  • ObjectLockMode (string) –

    The Object Lock mode that you want to apply to the object copy.

    Note

    This functionality is not supported for directory buckets.

  • ObjectLockRetainUntilDate (datetime) –

    The date and time when you want the Object Lock of the object copy to expire.

    Note

    This functionality is not supported for directory buckets.

  • ObjectLockLegalHoldStatus (string) –

    Specifies whether you want to apply a legal hold to the object copy.

    Note

    This functionality is not supported for directory buckets.

  • ExpectedBucketOwner (string) – The account ID of the expected destination bucket owner. If the account ID that you provide does not match the actual owner of the destination bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

  • ExpectedSourceBucketOwner (string) – The account ID of the expected source bucket owner. If the account ID that you provide does not match the actual owner of the source bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

Return type:

dict

Returns:

Response Syntax

{
    'CopyObjectResult': {
        'ETag': 'string',
        'LastModified': datetime(2015, 1, 1),
        'ChecksumCRC32': 'string',
        'ChecksumCRC32C': 'string',
        'ChecksumSHA1': 'string',
        'ChecksumSHA256': 'string'
    },
    'Expiration': 'string',
    'CopySourceVersionId': 'string',
    'VersionId': 'string',
    'ServerSideEncryption': 'AES256'|'aws:kms'|'aws:kms:dsse',
    'SSECustomerAlgorithm': 'string',
    'SSECustomerKeyMD5': 'string',
    'SSEKMSKeyId': 'string',
    'SSEKMSEncryptionContext': 'string',
    'BucketKeyEnabled': True|False,
    'RequestCharged': 'requester'
}

Response Structure

  • (dict) –

    • CopyObjectResult (dict) –

      Container for all response elements.

      • ETag (string) –

        Returns the ETag of the new object. The ETag reflects only changes to the contents of an object, not its metadata.

      • LastModified (datetime) –

        Creation date of the object.

      • ChecksumCRC32 (string) –

        The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

      • ChecksumCRC32C (string) –

        The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

      • ChecksumSHA1 (string) –

        The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

      • ChecksumSHA256 (string) –

        The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

    • Expiration (string) –

      If the object expiration is configured, the response includes this header.

      Note

      This functionality is not supported for directory buckets.

    • CopySourceVersionId (string) –

      Version ID of the source object that was copied.

      Note

      This functionality is not supported when the source object is in a directory bucket.

    • VersionId (string) –

      Version ID of the newly created copy.

      Note

      This functionality is not supported for directory buckets.

    • ServerSideEncryption (string) –

      The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).

      Note

      For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) ( AES256) is supported.

    • SSECustomerAlgorithm (string) –

      If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that’s used.

      Note

      This functionality is not supported for directory buckets.

    • SSECustomerKeyMD5 (string) –

      If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.

      Note

      This functionality is not supported for directory buckets.

    • SSEKMSKeyId (string) –

      If present, indicates the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.

      Note

      This functionality is not supported for directory buckets.

    • SSEKMSEncryptionContext (string) –

      If present, indicates the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.

      Note

      This functionality is not supported for directory buckets.

    • BucketKeyEnabled (boolean) –

      Indicates whether the copied object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).

      Note

      This functionality is not supported for directory buckets.

    • RequestCharged (string) –

      If present, indicates that the requester was successfully charged for the request.

      Note

      This functionality is not supported for directory buckets.