SQS / Client / set_queue_attributes

set_queue_attributes#

SQS.Client.set_queue_attributes(**kwargs)#

Sets the value of one or more queue attributes, like a policy. When you change a queue’s attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the MessageRetentionPeriod is reduced below the age of existing messages.

Note

  • In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.

  • Cross-account permissions don’t apply to this action. For more information, see Grant cross-account permissions to a role and a username in the Amazon SQS Developer Guide.

  • To remove the ability to change queue permissions, you must deny permission to the AddPermission, RemovePermission, and SetQueueAttributes actions in your IAM policy.

See also: AWS API Documentation

Request Syntax

response = client.set_queue_attributes(
    QueueUrl='string',
    Attributes={
        'string': 'string'
    }
)
Parameters:

  • QueueUrl (string) –

    [REQUIRED]

    The URL of the Amazon SQS queue whose attributes are set.

    Queue URLs and names are case-sensitive.

  • Attributes (dict) –

    [REQUIRED]

    A map of attributes to set.

    The following lists the names, descriptions, and values of the special request parameters that the SetQueueAttributes action uses:

    • DelaySeconds – The length of time, in seconds, for which the delivery of all messages in the queue is delayed. Valid values: An integer from 0 to 900 (15 minutes). Default: 0.

    • MaximumMessageSize – The limit of how many bytes a message can contain before Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) up to 262,144 bytes (256 KiB). Default: 262,144 (256 KiB).

    • MessageRetentionPeriod – The length of time, in seconds, for which Amazon SQS retains a message. Valid values: An integer representing seconds, from 60 (1 minute) to 1,209,600 (14 days). Default: 345,600 (4 days). When you change a queue’s attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the MessageRetentionPeriod is reduced below the age of existing messages.

    • Policy – The queue’s policy. A valid Amazon Web Services policy. For more information about policy structure, see Overview of Amazon Web Services IAM Policies in the Identity and Access Management User Guide.

    • ReceiveMessageWaitTimeSeconds – The length of time, in seconds, for which a ReceiveMessage action waits for a message to arrive. Valid values: An integer from 0 to 20 (seconds). Default: 0.

    • VisibilityTimeout – The visibility timeout for the queue, in seconds. Valid values: An integer from 0 to 43,200 (12 hours). Default: 30. For more information about the visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.

    The following attributes apply only to dead-letter queues:

    • RedrivePolicy – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:

      • deadLetterTargetArn – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.

      • maxReceiveCount – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. Default: 10. When the ReceiveCount for a message exceeds the maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.

    • RedriveAllowPolicy – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:

      • redrivePermission – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:

        • allowAll – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.

        • denyAll – No source queues can specify this queue as the dead-letter queue.

        • byQueue – Only queues specified by the sourceQueueArns parameter can specify this queue as the dead-letter queue.

      • sourceQueueArns – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the redrivePermission parameter is set to byQueue. You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the redrivePermission parameter to allowAll.

    Note

    The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.

    The following attributes apply only to server-side-encryption:

    • KmsMasterKeyId – The ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see Key Terms. While the alias of the AWS-managed CMK for Amazon SQS is always alias/aws/sqs, the alias of a custom CMK can, for example, be ``alias/MyAlias ``. For more examples, see KeyId in the Key Management Service API Reference.

    • KmsDataKeyReusePeriodSeconds – The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes). A shorter time period provides better security but results in more calls to KMS which might incur charges after Free Tier. For more information, see How Does the Data Key Reuse Period Work?.

    • SqsManagedSseEnabled – Enables server-side queue encryption using SQS owned encryption keys. Only one server-side encryption option is supported per queue (for example, SSE-KMS or SSE-SQS).

    The following attribute applies only to FIFO (first-in-first-out) queues:

    • ContentBasedDeduplication – Enables content-based deduplication. For more information, see Exactly-once processing in the Amazon SQS Developer Guide. Note the following:

      • Every message must have a unique MessageDeduplicationId.

        • You may provide a MessageDeduplicationId explicitly.

        • If you aren’t able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).

        • If you don’t provide a MessageDeduplicationId and the queue doesn’t have ContentBasedDeduplication set, the action fails with an error.

        • If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.

      • When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.

      • If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.

    The following attributes apply only to high throughput for FIFO queues:

    • DeduplicationScope – Specifies whether message deduplication occurs at the message group or queue level. Valid values are messageGroup and queue.

    • FifoThroughputLimit – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are perQueue and perMessageGroupId. The perMessageGroupId value is allowed only when the value for DeduplicationScope is messageGroup.

    To enable high throughput for FIFO queues, do the following:

    • Set DeduplicationScope to messageGroup.

    • Set FifoThroughputLimit to perMessageGroupId.

    If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.

    For information on throughput quotas, see Quotas related to messages in the Amazon SQS Developer Guide.

    • (string) –

      • (string) –

Returns:

None

Exceptions